Professional Documents
Culture Documents
Attached please find the template for Architectural drawing list which shows a sample of
each type of drawing. The drawing numbers for various disciplines can be as follows:
- Structural : ICC-J+W-ST-PL-0001-01
- Mechanical : ICC-MEP-ME-PL-0001-01
- Plumbing : ICC-MEP-PL-PL-0001-01
- Electrical : ICC-MEP-EL-PL-0001-01
- Elevators : ICC-LB-LFT-PL-0001-01
· All drawings shall be composed in such a way that when printed to A3 size they
shall be legible. However, A1 size drgs to be the most commonly used size
· All hard copy submission shall be to ‘one uniform size’; can be A1, A2 or A3 size
(very rarely A3 size)
· AHC is requested to submit a list of all the drawings you will prepare at each
stage of submission up to Tender Stage. Same have to be prepared by your sub-
consultants as well.
· Drawings from all consultants shall have same size of ‘Title Block’ and with
similar design. Drawing number and drawing title at the bottom of the title block
Also, make a note of the following when GFC drawings are submitted:
2. Every drawing has to have the stamp and signature of the specific consultant
and the stamp and signature of AHC.
Regards
Saly Razik
Mumbai, India.
Email: salyrazik@hillintl.com
www.hillintl.com