RINA - RULES FOR THE CLASSIFICATION OF SHIPS ( 2012 ) - Pt C, Ch 1, Sec 8
Item Requirement Value unit
Material : AISI 304L Stainless Steel - - - 2 Rm = Minimum ultimate tensile strenght of blade material ≥ 400 470 N/mm 2.1.1 d = Densityt of blade material - 7.950 Kg/dm³
f = Material factor ( table 3 ) - 9.000 -
D = Propeller diameter - 1.930 m
H0.7 = Pitch at 0.7 radius from propeller axis - 2.070 m
H = Mean pitch of propeller - 2.070 m
r = D/H - 0.933 -
P = Maximum continuous power of propulsion machinery - 940 KW
N = Rotational speed of the propeller - 293.0 rpm
2.2.1 MT = Continuous transmitted torque MT = 9.55 P / N - 30.63 KN.m a) B = Expanded area ratio - 0.70 - h = Rake - 0.0 mm l = Developed width of blade section at 0.25 radius from propeller axis - 492.7 mm z = Number of blades - 4.0 - Maximum thickness of the propeller blade at t0.25 = t0.25 ≥ 65.3 - mm the section at 0,25 radius from the propeller H0.6 = Pitch at 0.6 radius from propeller axis - 2.070 m r0.6 = D / H0.6 - 0.933 - 2.2.1 l0.6 = Developed width of blade section at 0.6 radius from propeller axis - 686.2 mm b) Maximum thickness of the propeller blade at t0.6 = t0.6 ≥ 32.9 - mm the section at 0,6 radius from the propeller axis 2.2.1 Radius at the blade root ≥ 0.75 t0.25 ≥ 49.0 mm c) Blade thickness at 0.25 radius of ducted propeller ≥ 1.1 t0.25 ≥ 71.8 72.1 mm 2.5.1 Blade thickness at 0.6 radius of ducted propeller ≥ 1.1 t0.6 ≥ 36.1 38.4 mm
Projetado Conferido Aprovado Data Data
Alvaro Fev/2013 Cliente Projeto Desenho Nº Camorim / ETP Rebocador Título Revisão Folha MEMÓRIA DE CALCULO DO HÉLICE DO MOTOR CENTRAL 1 1/1