Professional Documents
Culture Documents
Company Name :
Job Description :
Designed by :
Date and Time : Friday, June 10, 2022 3:17:40 PM
(License Number: Timer-SN111-C0-1)
_____________________________________________________________________
Cover (mm) Conc. Unit Weight (kN/m³) Steel Unit Weight (kg/m³)
25 24 7860
Loading Cases
Total Selected Loading Cases = 8
Selected Loading Cases Table
Load Load Analysis
No. Source P My Mz T Vy Vz Myi Mzi
Case Comb. Type
1 G.L. Full LC1 Top 16841.4 157.7 -142.3 0.0 -18.0 -19.3 78.7 -71.0
2 G.L. Min LC1 Top 9663.9 157.7 -142.3 0.0 -18.0 -19.3 78.7 -71.0
3 G.L. Full LC1 Bot 16916.2 -0.2 0.2 0.0 -18.0 -19.3 78.7 -71.0
4 G.L. Min LC1 Bot 9717.4 -0.2 0.2 0.0 -18.0 -19.3 78.7 -71.0
5 N.L. 1 LC2 Comb. 13971.8 482.8 -47.0 0.0 -14.3 -148.2 238.2 -23.4
6 N.L. 2 LC2 Comb. 14009.1 47.0 -417.5 0.0 -128.5 -14.3 23.5 -205.5
7 N.L. 3 LC2 Comb. 14317.8 -389.3 -35.7 0.0 -10.8 119.9 -191.5 -17.8
8 N.L. 4 LC2 Comb. 14280.5 46.5 334.9 0.0 103.4 -14.1 23.2 164.2
Source - Source of Loading (G.L. for Gravity, N.L. for Notional Load)
Load Case - Load Case Number of Wind/Notional Load (Full or Minimum for Gravity), Load Comb. - Load Combination Number
Analysis Type - Type of Analysis (Top or Bottom Column Part for 2D, 3D for 3D Analysis, P-D for P-Delta Analysis)
P - Axial Force (kN), My / Mz - Bending Moment About Y-Y / Z-Z Axis (kNm)
T - Torsion Force (kN), Vy / Vz - Shear Force in Y-Y / Z-Z Axis (kN)
Myi / Mzi - Initial Bending Moment in Mid Length of Column About Y-Y / Z-Z Axis (kNm)
Load Allowance of 10% has been added to the loading for design purpose
My and Mz above are calculated using Load Allowance x M (from analysis)
SLENDERNESS RESULT
Clause 3.8.1.6 : Effective Height of a column
Clause 3.8.3 : Deflection induced moments in solid slender columns
Column Dimension in Plane of Bending (About Y-Y Axis), Hyy = 300.0 mm
Column Dimension in Plane of Bending (About Z-Z Axis), Hzz = 900.0 mm
Total stiffness of restraint elements (beams) at top part of column, KbTop = 784313.7 mm 3
No. Element Type Mark b, mm h, mm L, mm Angle, ° K, mm^3 Cantilever
1 Beam gb10-1 300 500 8500 180.0 367647 No
2 Beam gb10-2 300 500 7500 0.0 416667 No
Total stiffness of restraint elements (beams) at bottom part of column, KbBot = 0.0 mm 3
Relative Stiffness at Top of Element, αTop = 10.000 (Governed by Maximum Relative Stiffness)
Relative Stiffness at Bottom of Element, αBot = 5.000
β1 = 0.7 + 0.05 × (αTop + αBot) = 1.45, β2 = 0.85 + 0.05 × Min (αTop, αBot) = 1.10
β = Min (β1, β2) = 1.10 > 1.0, β taken as 1.0
Effective Length, leff = 1.00 × lo = 3000.0 mm
leff / H = 3000.0 / 300.0 = 10.0 < 15
The Column Is Short About Y-Y Axis
Total stiffness of restraint elements (beams) at top part of column, KbTop = 837053.6 mm 3
No. Element Type Mark b, mm h, mm L, mm Angle, ° K, mm^3 Cantilever
1 Beam gb3-1 300 500 8000 270.0 390625 No
2 Beam gb3-2 300 500 7000 90.0 446429 No
Total stiffness of restraint elements (beams) at bottom part of column, KbBot = 0.0 mm 3
Relative Stiffness at Top of Element, αTop = 10.000 (Governed by Maximum Relative Stiffness)
Relative Stiffness at Bottom of Element, αBot = 5.000
β1 = 0.7 + 0.05 × (αTop + αBot) = 1.45, β2 = 0.85 + 0.05 × Min (αTop, αBot) = 1.10
β = Min (β1, β2) = 1.10 > 1.0, β taken as 1.0
Effective Length, leff = 1.00 × lo = 3000.0 mm
leff / H = 3000.0 / 900.0 = 3.3 < 15
The Column Is Short About Z-Z Axis
Section Data
Code of Practice used : BS8110 : 1997
General Data
Concrete Area = 675000.0 mm²
Steel Bar Area = 25735.9 mm²
Steel Ratio = 3.8127 %
Material Data
Concrete Test Specimen Type : Cube
Concrete Cube Strength, fcu = 30.0 N/mm²
Steel Yield Strength, fy = 460.0 N/mm²
Ultimate Strain of Concrete, εcu = 0.0035
Elastic Modulus of Concrete, Ec = 24597.0 N/mm²
Elastic Modulus of Steel, Es = 200000.0 N/mm ²
Loading Data
Mx and My is taken with respect to the geometrical centroid of the section
Applied Axial Load = 16841.4 kN
Applied Bending Moment about X-X Axis = -336.8 kNm
Applied Bending Moment about Y-Y Axis = -336.8 kNm
Design Status
Moment is taken at the plastic centroid
Axial Force(F) Applied = 16841.38 kN
Axial Force(F) Capacity = 18417.95 kN
License Number: Timer-SN111-C0-1
4/8
Applied Bending Moment about X-X Axis = -336.83 kNm
Bending Moment Capacity about X-X Axis = -368.36 kNm
Design Passed
Reinforcement provided: 32T32 (3.81%)
k value = 0.920
Note:
k value = √ ((AsReq) / (AsProv))
AsReq = Area of steel required (mm²)
AsProv = Area of steel provided (mm²)
Concrete contribution
Reinforcement Result
Verification
Verification of the output results for the Axial Load Capacity
Contribution from concrete = 675000.00*0.447*30.0/1000 = 9053.8 kN
Contribution from displaced concrete force =
(804.2+804.2+804.2+804.2+804.2+804.2+804.2+804.2+804.2+804.2+804.2+804.2+804.2+804.2+804.2+804.2+804.2+804.2+804.2+
804.2+804.2+804.2+804.2+804.2+804.2+804.2+804.2+804.2+804.2+804.2+804.2+804.2)*0.447*30.00/1000 = 345.20kN
Contribution from reinforcement bars = 9709.34kN
Contribution from composite steel = 0.00kN
Total Axial load = 1.00*(9053.81-345.20+9709.34+0.00) = 18417.96kN
Table of axial forces, moments and M / N ratios for each load case
No P (kN) My (kNm) Mz (kNm) My / P (m) Mz / P (m)
1 16841.4 -336.8 -336.8 -0.0200 <= 0.4500 -0.0200 <= 0.5400
2 9663.9 -193.3 -193.3 -0.0200 <= 0.4500 -0.0200 <= 0.5400
3 16916.2 -338.3 -338.3 -0.0200 <= 0.4500 -0.0200 <= 0.5400
4 9717.4 -194.3 -194.3 -0.0200 <= 0.4500 -0.0200 <= 0.5400
5 13971.8 -602.6 -327.6 -0.0431 <= 0.4500 -0.0234 <= 0.5400
6 14009.1 -47.0 -508.7 -0.0034 <= 0.4500 -0.0363 <= 0.5400
7 14317.8 544.6 -312.6 0.0380 <= 0.4500 -0.0218 <= 0.5400
8 14280.5 -46.5 460.0 -0.0033 <= 0.4500 0.0322 <= 0.5400
P - Axial Force, My / Mz - Bending Moment About Y-Y / Z-Z Axis
My / P, Mz / P - Bending Moment over Axial Force Ratio
No check is required for shear because all the load cases within the limit as specified in BS8110:Part1 Clause 3.8.4.6
Main Bar Diameter, diaMain = 32.0 mm, Link Diameter, diaLink = 10.0 mm, Link Spacing, SvLink = 75.0 mm
Cover for Shear and Torsion Design from Concrete Surface to Main Bar Surface = 35 mm
Clause 3.8.4.6
Shear and torsion not check due to M / N and shear stress for all load cases not exceeding the limit
Clause 3.8.4.6
Shear and torsion not check due to M / N and shear stress for all load cases not exceeding the limit