Professional Documents
Culture Documents
DATA SHEET FOR ELECTRO-PNUEMATIC VALVE POSITIONERS Contr. Doc. No. : Sht. No. :
( E/P POSITIONER)
1 Tag Number XY‐TYPE1 17 Fail Safe Action AS needed
2 P & ID No. 18 Spring Range AS needed
3 Supply Pressure 4~10 Kgr/cm2 19 Valve & Actuator Valve Stroke Or Angle Degree AS needed
4 Input Signal 4 ‐ 20 mA (HART) 20 Data Valve Characteristic AS needed
5 Electr. Connection M20 x 1.5 21 Actuator Size VTS
6 Pneum. Connection 1/4" NPT(F) 22 Actuator Type AS needed
7 Maximum Span V.T.S 23 Position Switch Module Required, Integrated Proximity Type, as an option
8 Output Signal Increase Action AS needed 24 Feedback Position Module(4~20mA) Required, as an option
General
9 Port Type Single/Double Acting 25 Output Gauge Required, (Note 3)
10 Electrical Classification EExia IIC T4 26 Option / Supply Gauge Required, (Note 3)
11 Mechanical Protection IP 66 (As Minimum) 27 Accessories Air Set+Gauge+ Mounting Kit Required, ( Note 2), (Note 3)
12 Housing Material Stainless Steel 28 Mounting Bracket Required, (Material: s.s 304)
13 EMC Approval Required 29 Attachment Kit Required, (Material: s.s 316)
14 Local User Interface Required 30 Cable Gland & Shroud Required, (Note 1)
15 Local LCD Display Required 31 Purchasing Model No. ‐
16 SIL SIL2 32 Data Manufacturer ‐
Technical Data of Existing Control Valves
Positioner Action Actuator
Item Stroke
Tag No. P&ID Valve Notes
No. Signal Supply Spring (mm) Fail Safe
Manufacturer / Mount. Posi‐ Charac‐ Valve Type
Model No. Input Press. Port Type Port Actuator Signal Type Range Or Model Action
Model No. Position tioner teristic
Increase (Kg/cm2) Angle
(Kg/cm2) (Kg/cm2) To (Degree)
7
Notes : Abbrivation : Positioner Mounting Position
HT : Hitachi D.A : Direct Action S.P : Single Port L
1 - Cable Gland Shall Be Double Sealed Type ( Material : Nickle Plated Brass) . GU : Gulde R.A : Revers Action D.P : Double Port
2 - Air Set preferably Shall Be Supplied By Positioner's Manufacturer.(Body Material :Stainless Steel). TK : Toko EQ% : Equial Percentage V.T.S Vendor To Specify
3 - Gauge-Body Material Shall Be Stainless Steel . MY : Motoyama L: Linear Cylind, Cylinder
YEW : Yokogawa Diaph. : Diaphragm R
Page 14 of 25
OWNER : PROJECT : CONTRACTOR :
TITLE :
CLIENT DOC. NO.: FILE NAME :
Page 15 of 25