Professional Documents
Culture Documents
reviewer1@nptel.iitm.ac.in ▼
Unit 4 - Week 3
Course
outline Assignment 3
The due date for submitting this assignment has passed. Due on 2018-02-28, 23:59 IST.
How to access
the portal Submitted assignment
Week 1 1) An SSPA is driven with a 10 dBm input power signal. P1, dB input power is 13 dBm. Now a 1 point
new signal with same PAPR but 15 dBm average input power is applied:
Week 2
NMSE will decrease
Week 3 EVM will decrease
ACPR will decrease
Power
ACLR will increase
Amplifiers:
Nonlinear
No, the answer is incorrect.
Distortion in
Transmitted
Score: 0
Signals Accepted Answers:
Power
ACPR will decrease
Amplifiers:
2) Arrange the different PA types in the increasing order of efficiency 1 point
Useful
Definitions
D< B< C < AB < A
Case study-I: A< B< C < AB <D
Power amplifier
Line-up for
A< AB< B < C <D
achieving A < D < C < AB <B
linearity &
power No, the answer is incorrect.
requirement Score: 0
example
Accepted Answers:
Case study-II: A< AB< B < C <D
Power amplifier
Line-up for 3) The signal A1sin (ωt+α1) is applied to a TWTA, the output of TWTA is given by 1 point
linearity & 10 A1sin (ωt+α1), which of the following sentences are true:
power
requirement:
Need for
AM/AM is 10 dB, AM/PM is zero radian
linearization TWTA is working in linear region
techniques
TWTA has gain of 10 dB.
Behavioral All of the above
models for
representing No, the answer is incorrect.
nonlinear Score: 0
distortions
Accepted Answers:
Quiz : TWTA is working in linear region
Assignment 3
4) For same OPBO power, which of the following has higher IMD3 levels 1 point
Feedback for
Week 3
TWTA
Assignment_Solution SSPA
https://onlinecourses.nptel.ac.in/noc18_ec01/unit?unit=19&assessment=36 1/5
16/05/2018 Basics of software-defined radios and practical applications - - Unit 4 - Week 3
No, the answer is incorrect.
Week 4
Score: 0
5) The Power added efficiency is always smaller than the drain efficiency for SSPA: 1 point
True
False
6) If the output power from a SSPA is 10 watt, then if power added efficiency of the SSPA is 1 point
50%, the dissipated power will be:
40 dBm
20 dBm
10 dBm
0 dBm
7) For the following questions onwards, please refer to the given commercial data-sheet for a 1 point
variable gain SSPA https://www.minicircuits.com/pdfs/ZFL-1200G+.pdf
YES
NO
8) We need a signal to be amplified at 500 MHz. If we want to achieve a distortion-free output 1 point
signal, can we get +8 dBm output power from this PA
YES
NO
9) If we apply input signal with -20 dBm signal power, typically what power can we 1 point
expect at PA output signal, considering typical gain flatness:
6 to 8 dBm
-6 to –8 dBm
8 to 9 dBm
4 to 6 dBm
https://onlinecourses.nptel.ac.in/noc18_ec01/unit?unit=19&assessment=36 2/5
16/05/2018 Basics of software-defined radios and practical applications - - Unit 4 - Week 3
10)What should be the input power for which the output power is compressed by 1dB with 1 point
respect to output power if its linear range is extrapolated for higher powers at 1 GHz?
-17.7 dBm
-14.7 dBm
-20.7 dBm
-25.7 dBm
11)What would be gain of this variable gain SSPA, if control voltage of 2 V is applied: 1 point
Approx. 27 dB
Approx. 20 dB
Approx. 0 dB
Approx. -20 dB
12)For control voltage level beyond 2 volts, this PA works as an attenuator: 1 point
True
False
Increasing
Decreasing
11.48 dBm
10.46 dBm
10.64 dBm
11
15)For the frequency of operation which provides max. power at 1 dB compression, is the gain 1 point
also maximum
YES
NO
https://onlinecourses.nptel.ac.in/noc18_ec01/unit?unit=19&assessment=36 3/5
16/05/2018 Basics of software-defined radios and practical applications - - Unit 4 - Week 3
NO
16)Three PAs are arranged in cascade, their gains are provided in dB, the gain of such an 1 point
assembly will be:
G=G1G2G3
G= G1+ G2+G3
Both
None
17)What is expected C/IMD3 ratio for the given data at 900 MHz at 1-dB compression: 1 point
Approx. 20 dBc
Approx. 22 dBc
Approx 18 dBc
None of above
18)At 800 MHz frequency, if a signal with 7 dB PAPR is applied and there is no 1 point
linearity constraint, how many PAs are required to provide a signal of output power 10
dBm and gain of minimum 26 dB:
2
4
3
5
Funded by
https://onlinecourses.nptel.ac.in/noc18_ec01/unit?unit=19&assessment=36 4/5
16/05/2018 Basics of software-defined radios and practical applications - - Unit 4 - Week 3
Powered by
https://onlinecourses.nptel.ac.in/noc18_ec01/unit?unit=19&assessment=36 5/5