Professional Documents
Culture Documents
NOTES
1.In the event of an emergency:
a. Shut down equipment being used. 7. If work is in progress on shift change, incoming
b. Proceed to designated assembly area. operator must check conditions, and initial workman’s
c. Do not resume work until advised by supervisor. permit.
2. Stop work on operator’s request. 8. Incase of any change in work condition inform to issuer.
3. Smoking only in designated areas. 9.Stop work if any unusual odour, sound or vapour is
4. All hazardous work requires a permit. detected. Check with supervisor.
5. This permit valid for one shift only. 10. All electrical equipment must be grounded type.
6. Permit issuer & receiver must check the site before 11. Safe entry and egress in place.
closing the permit.
PAGE 1 OF 1
HOT WORK PERMIT
All the points mentioned in the above checklist have been checked & found OK
PAGE 2 OF 1