- The checklist ensures approval of subcontractors and materials, as well as inspection of incoming materials and proper storage and protection.
- It also checks that survey and layout, steel erection, preparation for fabric installation, and installation of the fabric itself are completed according to approved shop drawings and specifications.
- The checklist is to be signed off by representatives of the subcontractor, contractor, and consultant to verify all items have been properly addressed.
Original Description:
Original Title
Checklist for Fabrication & Installation Of Tensile Fabric Shades
- The checklist ensures approval of subcontractors and materials, as well as inspection of incoming materials and proper storage and protection.
- It also checks that survey and layout, steel erection, preparation for fabric installation, and installation of the fabric itself are completed according to approved shop drawings and specifications.
- The checklist is to be signed off by representatives of the subcontractor, contractor, and consultant to verify all items have been properly addressed.
- The checklist ensures approval of subcontractors and materials, as well as inspection of incoming materials and proper storage and protection.
- It also checks that survey and layout, steel erection, preparation for fabric installation, and installation of the fabric itself are completed according to approved shop drawings and specifications.
- The checklist is to be signed off by representatives of the subcontractor, contractor, and consultant to verify all items have been properly addressed.
Fabrication and Installation of Tensile Fabric Shades Rev. No. : 0 SUBCONTRACTOR CONTRACTOR 1 of 1 Page :
Section of Work: CIVIL – SITE WORKS Location:
Level: Checked by Checked by STAGE ITEM DATE S/C CONT. CONSULTANT Sub-Contractor/ - Check Sub-contractor / Supplier approval. Sup Approval Material Approval - Check Material as per approvals for the tensile fabric, steel components, cables and fittings.
Shop drawing - Check work as per approved shop drawing
Approval showing details of fabrication, assembly, installation and fixing of specific items or components are available. Incoming material - Check seam width at overlap of fabrics to be inspection 35mm minimum. - All the cables to be class A
Storage and - Check the delivered material is stored under
Protection dry, shaded and well ventilated conditions to prevent formation of wet stains.
Survey and - Check all the levels and layouts as per
Setting out approved shop drawings. Steel erection - Check accurate bearing of steel on foundation. - Check as per approved drawing. - Check colour of the steel is as per the approved colour. - Touch up for steel paint to be done Preparation for - Contact surfaces area free from factors Installation of causing rips or scratching during installation of Fabric fabric panels. Installation of - Any wrinkles or damages in the surface Fabric rectified. - Fabric is cleaned and dirt and panel markings are removed - Check colour of Fabric as per approved & no notable shade. - Joints of Fabric is as per shop drawing - Joints at Fabric is neat and same width
For S/C: Date: For CONTRACTOR QA/QC: Date For CONSULTANT REP. Date: