You are on page 1of 3

License=Al Sharif Group & KEC Co.

Ltd/SA-881-t Not For Resale ,1/23/2023 8:16:29 PM Saudi Time


INSPECTION AND TEST PLAN (I&TP) FOR Fiber Optic Cable Joint Enclosure

Type Factory Acceptance Test

Manufacturer Name: Contract No. / Project Title:


Plant Location: ITP No. : ITP-FOIC-07
Equipment/Material Description: FO Interconnecting Devices and Passive Review Cycle No :
Componnets Date:
Type of Equipment / Material Joint Enclosures (OPGW/NMFOC)

Applicable Test Insp. Acceptance Criteria Tests Tentative Remarks Mfr’s


Item Tests Description Sample
Standard procedures Type Location dates Compliance
There shall be no scratches or
dents on joint enclosure. Coating
48-TMSS-12, 20% W and surface finish shall be good.
1 Visual Inspection IEC 61284
Rev.0, The joint box shall be as per
drawing.

Splice trays, end caps, fiber


protection sleeves, latch/lock,
48-TMSS-12, 100% W supplementry kit for ground wire
2 Quantitative Checking IEC 61284 and pole mount shall be as per
Rev.0,
packing list.

Legend:
W = Witness [by National Grid SA Engineers and/or National Grid SA approved 3rd Party Independent Inspection Agency (IIA) Inspector]
RC = Review of Certificates [by National Grid SA Engineers and/or National Grid SA approved 3rd Party Independent Inspection Agency (IIA) Inspector]

General instructions:
1- Manufacturer’s compliance shall be indicated in front of each test.
2- Approved Data Schedule & final drawings for the equipment / Material shall be attached.
3- Test Procedure & Day-to-day activity schedule shall be attached for approval.
4- The ITP must be duly signed and stamped by manufacturer's authorized personnel.
5- This document is valid for testing after S&SD approval.

ITP-FOIC-07 Standards & Specifications Department PAGE 1 OF 2

License=Al Sharif Group & KEC Co. Ltd/SA-881-t Not For Resale ,1/23/2023 8:16:29 PM Saudi Time
INSPECTION AND TEST PLAN (I&TP) FOR Fiber Optic Cable Joint Enclosure

Prepared by (Mfr's authorized QC test inspector) Approved by: (Mfr's authorized QA/QC personnel)

Date:
Date:
Manufacturer Stamp

S&SD Approval

ITP-FOIC-07 Standards & Specifications Department PAGE 2 OF 2

License=Al Sharif Group & KEC Co. Ltd/SA-881-t Not For Resale ,1/23/2023 8:16:29 PM Saudi Time

You might also like