Professional Documents
Culture Documents
1
Residual Risk
S Risk Rating Action
Hazard Risk Who is at Risk Necessary Control Measures Rating
R By
S L Rating S L Rating
Fires and Skin burns Welding crew Display Sign board “Danger keep out Hot Work in
explosion Fractures Site workers Progress.
Burn. Nearby Display Emergency numbers, Provision if first
contractor facilities and emergency vehicle, on call
Cataract
employees Adequate Supervision.
Ultra violet & radiation Lawful visitor on Conduct prestart meeting.
could cause eyes site Assign trained fire watch with fire extinguisher.
injury. Assign competent person for welding work.
Inspect the work area before use and identify any
potential fire risks.
Remove any flammable / combustible materials,
material which cannot be removed cover with fire
resistant blankets.
Provide spark arresting screen around the welding
activity and under the welding activity whilst welding
at height to avoid the spark, hot chips, molten
material from flying and falling to avoid burn, injury
and fire hazards.
3 4 4 16 Remove rust inhibitors paints, degreasers or other
coating from metals to be welded to avoid hazardous
CM/
HSEM
4 1 04
fumes and gases.
Provide welding screen to protect other employees
working in the area.
Electrode connector insulation shall be free of cracks
or damage and all connections made tight.
Welding cables should be fitted with proper cable
connections. Do not make temporary or taped joints
on damaged cables (use male female connector.
Keep welding cables clear of equipment and
materials which could cause damage to them.
Do not leave the cable coiled on the machine – it will
alter the current flow and disturb the welding process,
cable might also burn.
Assign fire watch for 30 minutes during break and
end of shift to observe any potential fire hazard.
Shut down the welding machine during breaks and
end of shift.
Welding Dizziness Welders. Provide adequate ventilation by using exhaust/vent
fumes and Rapture of stomach Workers. fans.
gases Supervisors
wall.
4
Respiratory problem Foremen. 4 4
16 CM/
2 2
04
HSEM