Professional Documents
Culture Documents
Material Submittal - FCU - 2
Material Submittal - FCU - 2
LOCATION:AL KHOR
MATERIAL APPROVAL REQUEST (MAR)
Project Name From : Moonlight Contracting & Cleaning MAR No. MAR-ABC-HVAC-011 Rev.02
JOLLIBEE
To : AL-KASHAF INTERNATIONAL Date Submitted : 19-07-2023
Submittal Contents
Submission Description
CHILLED WATER FCU
CONTRACTOR'S REVIEW
Prepared by : Manila Recommended for Approval by : (Contractor's PM) Stamp
Ibrahim Sharif
Eng. Eng.
Name / Sign / Date Name / Sign / Date
NOTE: We certify that the document submitted herewith have been reviewed in details and are in strict confirmance with the contract documents, drawings and
specifications except as other wise stated.
APPROVED
APPROVED AS NOTED
REJECTED
Eng.
Name / Sign
Date
Material Approval Submittal
For Fan Coil Unit – R1
I Table of Contents 1
IV Specified vs Proposed 4
ANNEXURE 2
Reply to Consultant comments
Project Name: Jollibee @ Al Khor Mall
Client: Moon Light Fit-out
Location: Jollibee @ Al Khor Mall
Manufacturer: Trosten Industries Company LLC
Supplier: Maven Trading & Installation WLL - Qatar
S. No Consultant Comments Reply to Consultant comments
1 No objection for the submitted brand Ok Noted.
2 Specified & offer selection schedule shall be provided Comply , Refer Annexure Specified vs Proposed - 4
3 Provide technical data sheet of the relevant unit only in the submittal required for the project Comply , Refer Annexure Technical Selection Sheet - 3
Project Name : Jollibee @ Al Khor Mall- Q60641 Client : Moonlight Fit-out
Location : Al Khor Mall
Manufacturer : Trosten
Supplier : Maven Trading & installation WLL
SPECIFIED PROPOSED
COOLING COIL CHILLED CHILLED WATER RUNNING
AIR COIL COOLING COIL AIR ON COIL AIR OFF COIL CHILLED WATER
CAPACITY WATER . SUPPLY WATER PRESSURE DIMENSION DETAILS WEIGHT MOTOR
UNIT TEMP. C) ESP CAPACITY TEMP. (°C) TEMP. (°C) TEMP.(°C)
AIR AIR TR TEMP.(C) MODEL AIR FLOW FLOW DROP POWER
REF UNIT EPD (Pa)
FLOW FLOW (GPM) QTY (LPS)
TYPE (Pa)
(LPS) (CFM) W D H
TOTAL TOTAL TOTAL SENSIBL
DB WB IN OUT DB WB DB WB IN OUT LPS KPa Kg Watts
KW TR KW KW
mm mm mm
FCU-01 500 1060 9.14 2.6 25.3 18.2 6.7 12.2 6 DUCTED 75 1 TFC H-120- 4XCSA5 540 75 9.14 7.22 25.3 18.2 14.39 13.3 6.7 12.2 0.4 21 1324 646 359 56 407
FCU-02 750 1590 13.89 3.95 25.4 18.2 6.7 12.2 9.5 DUCTED 75 1 TFC H-140- 4X CSA5 731 75 13.35 10.27 25.4 18.2 13.9 12.9 6.7 12.2 0.58 12 1485 680 359 64 546
ANNEXURE 3
Selection Sheet
Fan-Coil Selection Report
Project Information
Unit Ref. Country
Region Building Type Default
Altitude 16.00m Atmospheric pressure 101.26Kpa
Fan Coil Location
Series TFC H 4X High Static Ducted(4 Rows):Single Skin
WEB: http://www.trosten-industries.com
Email: info@trosten-industries.com
ANNEXURE 4
Specified vs Proposed.
Project Name : Jollibee @ Al Khor Mall- Q60641 Client : Moonlight Fit-out
Location : Al Khor Mall
Consultant :
Manufacturer : Trosten
Supplier : Maven Trading & installation WLL
SPECIFIED PROPOSED
COOLING COIL CHILLED CHILLED WATER RUNNING
AIR COIL COOLING COIL AIR ON COIL AIR OFF COIL CHILLED WATER
CAPACITY WATER . SUPPLY WATER PRESSURE DIMENSION DETAILS WEIGHT MOTOR
UNIT TEMP. C) ESP CAPACITY TEMP. (°C) TEMP. (°C) TEMP.(°C)
AIR AIR TR TEMP.(C) MODEL AIR FLOW FLOW DROP POWER
REF UNIT EPD (Pa)
FLOW FLOW QTY (LPS)
TYPE (Pa)
(LPS) (CFM) W D H
TOTAL TOTAL TOTAL SENSIBL
DB WB IN OUT DB WB DB WB IN OUT LPS KPa Kg Watts
KW TR KW KW
mm mm mm
FCU-01 500 1060 9.14 2.6 25.3 18.2 6.7 12.2 DUCTED 75 1 TFC H-120- 4XCSA5 540 75 11.89 8.56 25.3 18.2 12.3 11.7 6.7 12.2 0.51 34 1324 646 359 56 407
FCU-02 750 1590 13.89 3.95 25.4 18.2 6.7 12.2 DUCTED 75 1 TFC H-140- 4X CSA5 731 75 13.35 10.27 25.4 18.2 13.9 12.9 6.7 12.2 0.58 12 1485 680 359 64 546
Material Approval Submittal
For Fan Coil Unit
I Table of Contents 1
II Manufacturer Profile 2
V Country of Origin 5
XI Equipment Schedule 11
XIII GA Drawing 13
ANNEXURE 2
Manufacturer Profile
Centralized Air Conditioning and
K i t c h e n Ve n t i l a t i o n E q u i p m e n t
Care for comfort...
Introduction
About Trosten .......................................................... 01
Bin Dasmal Group .......................................................... 03
Legal Info .......................................................... 05
Technical Capabilities
Manufacturing Facility .......................................................... 06
Standards of Manufacture .......................................................... 08
Research & Development .......................................................... 09
Product Range
Air Handling Unit .......................................................... 10
Fan Coil Unit .......................................................... 11
Heat Recovery Unit .......................................................... 12
Condensing Unit .......................................................... 13
Ecology Unit .......................................................... 14
Electrostatic Precipitator .......................................................... 15
Ventilation Unit .......................................................... 16
Credentials
Certifications .......................................................... 17
Laboratory Tests .......................................................... 17
Quality Assurance
Quality Management System .......................................................... 18
Health Safety & Environment .......................................................... 19
Vision
To be recognized as a market leader in the
range of sustainable air-conditioning
products manufactured by us for our ability
to offer pioneered and customized
practical solutions.
About Trosten
Trosten Industries Company LLC., a Bin Dasmal Group Company, established in 2004,
specialized in the manufacturing of centralized air-conditioning and kitchen ventilation
equipment, with a full-fledged facility located in Dubai Investments Park.
At Trosten, it's all about providing quality HVAC solutions for residential, industrial and
specialized applications. With our strength in providing the right HVAC engineering
solutions, we offer tangible benefits to our customers by saving energy, ecological returns
and application of products.
Reliable and innovative technologies are our strength, addressing the solutions for
hygiene application, energy saver / recovery application, customizing the product to suit
the customer requirements.
01
Trosten product range encompasses:
TAH series Air Handling Units are Eurovent certified with the best performance of
mechanical strength, casing / filter by-pass leakage and thermal efficiencies using both
Polyurethane and Rockwool insulation.
Internationally recognized and certified components like AMCA certified fans, UL rated
filters and flexible connectors are used. Trosten Air Handling Units have been
performance tested in TUV-NORD, TUV-SUD and Intertek laboratories at various instances
to re-assure of our product quality. Laboratory tested Fan Coil Units are low height,
designed for ultra-silent performance to suit standard and district cooling applications.
TEC series Ecology units are ideal kitchen ventilation products for effective filtration and
odour removal. Factory-packaged control panel ensures trouble-free operation by
providing continuous feedback on the health of the system. Electrostatic Precipitators
are also available for sustainable and efficient removal of grease and smoke for kitchen
extract systems.
TCD-G series Condensing units with ozone friendly refrigerant R407C are built to deliver
great performance with unmatched reliability and energy efficiency.
Due to smooth aesthetics, contemporary looks and rust-free construction, all of these
products are ideal for shopping malls, office complexes, pharmaceuticals, clean room
and similar applications.
02
Bin Dasmal Group
Based in Dubai, Bin Dasmal Group has been conducting business globally since
1976. Initially, the Group started as a simple general contracting and trading
company in Dubai, UAE. As the years went on, the Group progressed and several
companies were established, contributing to the strength of the conglomerate and
vision of the management. Additionally, stronger links with public and private
sectors, as well as relations with local, regional and international partners, were
established.
Today, Bin Dasmal Group has over a dozen companies, operating in the entire GCC
region, involved in manufacturing, trading, contracting and servicing activities,
within diversified industries. All of these companies maintain the corporate
principles that lead to provide only the highest quality products and expert
services.
03
1976 – Bin Dasmal Contracting Est
2011 – Saudi Dutest Industrial Co. LLC., Al Jubail Ind. City, KSA
04
Legal Info
Company Name : Trosten Industries Company LLC
Email : info@trosten-industries.com
05
Manufacturing Facility
Trosten has the distinction of being the first Air Handling Unit manufacturer in Dubai to
establish one-of-its kind facility.
The facility is located at the Dubai Investments Park, Dubai which is strategically located
to cater to the Middle-East and Asian markets. Dubai being a major commercial and
shipping hub, Trosten provides the customers, easy access to the facility with the
shortest lead times.
Advanced manufacturing tools with in-house facilities for sheet metal fabrication and
CFC-free PUF injection with Italian technology adds strength and flexibility to our design
and manufacturing products suiting regional conditions and requirements.
A team of highly skilled engineers, technicians and operators form the back bone of the
facility. Implementation of OHSAS 18001:2007 for Occupational Health and Safety
Management System has ensured in maintaining a safe and comfortable working
environment. Annual training programs are conducted to enhance and empower the
employees with the latest advancements in manufacturing processes and new
technologies, enabling them to stay up to date with latest developments.
Trosten is fully geared to meet any urgent delivery schedules or deliveries in accordance
with project program and thereby avoiding unnecessary storage / damage at site. Being
a regional manufacturing facility, relieves our customers of the need to maintain stock of
spares. Further Trosten has a very comprehensive inventory policy, which ensures
minimum downtime.
07
Standards of Manufacture
08
Research and Development
Trosten has prudently invested rich resources in its Research and Development arm to
ensure customer satisfaction and to fulfill its commitment to meet the ever-increasing
market requirements.
Product innovation, research and technology development are not only the driving forces
to enhance the production techniques and market competitive advantage, but also
cornerstones of sustainable development. Technology enhancement is driven by
technical experts in liaison with academic and research institutions.
Meeting customer and market requirements, by not only providing our expertise on
efficient solutions but also by improving the efficiency of existing products and
safeguarding the environment with greener solutions.
Customization to meet various applications is one of the key functions of the division.
Any customer requiring solutions for specialized processes or applications, not limited to
the HVAC industry are offered.
09
Product Range
Air Handling Unit
TAH Series
Capacity range: 600 CFM to 80000 CFM
• High efficiency aerofoil bladed backward curved plug fans, tested and certified by
AMCA in accordance to AMCA 210 for air performance and AMCA 300 for sound
performance.
• EFF1, TEFC, IP55 degree of protection, Class F insulated, VFD compatible electric motors.
• AHRI certified cooling & heating coils in accordance with AHRI 410-91.
• Specially designed drain pan in stainless steel construction with all round edges, avoiding
microbial growth as per ASHRAE 62-1999.
• UL certified filters selected for high dust-holding capacity and lower pressure drop.
• Specialized in constructing clean room units delivering optimum solution for hygiene
and desired IAQ.
10
Product Range
Fan Coil Unit
TFC Series
Capacity range: 200 CFM to 3000 CFM
• Ultra-silent
• Sleek, low height
• Corrosion-resistant casing
• Medium-static and high-static options
• Decorative ceiling suspended and floor mounted units
• Dynamically balanced blowers
• Built-in thermal overload protected motors
• 2-pipe and 4-pipe options
• Electric heaters
• Laboratory tested high-delta T coils
• Drawn-out type extended drain pan (no corner welding)
• Stainless steel drain pan
• Brass-forged headers
• Synthetic media filters
• Factory-fitted valve package
• CE certified
11
Product Range
Heat Recovery Unit
TFM Series
Capacity range: 600 CFM to 60000 CFM
12
Product Range
Condensing Unit
TCD G Series
Capacity range: 14.0 kW to 87.0 kW
13
Product Range
Ecology Unit
TEC Series
Capacity range: 600 CFM to 25000 CFM
14
Product Range
Electrostatic Precipitator
TEP Series
Capacity range: 2000 CFM TO 18000 CFM
TFM Series
Capacity range: 600 CFM to 80000 CFM
• Double skin construction with casing tested for the highest possible classes of EN 1886:2007
at TUV-NORD, Germany.
Casing mechanical strength: D1
Casing leakage: L1
Filter by-pass leakage: F9
• Centrifugal fans tested and certified by AMCA in accordance to AMCA 210 for air
performance and AMCA 300 for sound performance.
• EFF1, TEFC, IP55 degree of protection, Class F insulated, VFD compatible electric motors.
• Dynamically balanced drives.
• Compact in size.
• Low noise levels.
• Custom-built units to suit site requirements.
• Based on project need, can be offered with Sand Trap Louvers, Range of Filters,
Silencers, Fire Dampers etc.
16
Credentials
Certifications
Laboratory Tests
TUV-SUD TUV-SUD
EN 1886 Mechanical Characteristics of AHUs EN 1886 Sound Insertion Loss,
By TUV-SUD, Germany. ISO 3744 Acoustic By TUV-SUD, Germany
TUV-NORD Intertek
Real Unit Performance for Air Flow, Pressure, EN 1886 Mechanical Characteristics
Power Input, Cooling & Heating Capacity of AHUs By Intertek
17
Quality Assurance
Quality Management System
Quality Policy:
We at Trosten Industries Company LLC., are committed to provide the highest quality of
HVAC products and services which consistently satisfy the needs and expectations of our
customers.
18
Quality Assurance
Health, Safety and Environment Policy
HSE Policy:
It is Trosten’s policy to provide a safe and healthy environment in which our
employees, visitors and customers can carry out their business.
Trosten is committed to establish and maintain respectable HSE practice in all aspects of
the work and all level of the organization. The company is committed to prevent all types
of incidents and ensuring the health and safety of employees.
Employees at every level, including the management, are responsible and accountable
for the company’s overall safety initiatives. Complete and active participation by
everyone, every day, in every job is necessary for safety among all employees at their
workplace.
The management supports the participation of all employees in the program and provides
proper equipment, training and procedures.
Trosten identifies the environment aspects related to the organization and evaluate its
significant impacts. The company encourages pollution prevention, waste reduction,
reuse and recycle. It reduces the consumption of natural resources and energy by
improving the efficiency.
Trosten is committed to comply with the applicable health and safety legislations of
United Arab Emirates. The company recognizes that its employees are its most important
asset and it will provide them with appropriate health and safety training.
19
Support Services
Trosten with a team of professionals is totally committed to provide the highest level of
Quality Service and Customer Satisfaction.
The service experts are armed with adequate on-site and classroom training, highly
qualified to monitor and service its setup and formulate a comprehensive inventory
policy.
The following value added support services would be experienced with Trosten:
• Trained personnel: Our engineers and technicians undergo intensive training to
handle trouble shooting and also provide assistance to commissioning wherever
required.
• Customer First: Trosten believes in providing priority service to its customer,
ensuring immediate solution and counter measures avoiding re-occurrences.
• Quick response time: All service calls are logged in our ERP database,monitored
centrally, thereby ensuring quick response time and measuring the customers level of
satisfaction.
• Spares: Trosten has a comprehensive policy of maintaining genuine spares of critical
and non-critical components to ensure a minimum down time for the system.
• Product Upgrades & Enhancements: Upgradation or enhancement may arise out of the
need for replacement, or upgrading to new energy efficient equipment or a change in
heat load or office layout.
Every member shares the responsibility for serving the Customer, Internal or
External, and the Management ensures that all the possible resources are provided to
meet any demanding situation.
20
Sales Network
United Arab Emirates
Dubai & Northern Emirates
Trosten Industries Company LLC
P.O. Box: 5389, Dubai Investments Park, Dubai, UAE.
Tel: +971 4 8067666, Fax: +971 4 8067667
E-mail: dubai@trosten-industries.com
Oman
Dasmal Trading LLC
P.O. Box: 1084, PC 130, Al Misfa New Industrial Area, Sultanate of Oman.
Tel: +968 24437226 , Fax: +968 24437220
E-mail: oman@trosten-industries.com
Qatar
Khalifa Dasmal Trading WLL
P.O. Box: 32425, Doha, Qatar.
Tel: +974 4 4128605, Fax: +974 4 4128604
E-mail: qatar@trosten-industries.com
Saudi Arabia
Saudi Dutest Industrial Company LLC
P.O. Box: 11969, Postal code: 31961, Al Jubail Industrial City, KSA.
Tel: +966 3 3417222, Fax: +966 3 3417333
E-mail: ksa@trosten-industries.com
21
Looking beyond...
R e f : T R / C AT / P R Q / 1 3 / 0 6
T RO ST E N I N D U ST R I E S C O M PA N Y L L C
A BIN DASMAL GROUP Company
P. O . B o x 5 3 8 9 , D u b a i , U A E . I Te l : + 9 7 1 4 8 0 6 7 6 6 6 I F a x : + 9 7 1 4 8 0 6 7 6 6 7
i n f o @ t ro s t e n - i n d u s t r i e s . c o m I w w w. t ro s t e n - i n d u s t r i e s . c o m
ISO 9001 : 2015 ISO 14001 : 2015 ISO 45001 : 2018
Mission
To meet customer’s demands on environmental comfort using our knowledge,
Vision
To be recognized as a market leader, in the range of HVAC products manufactured
Components
Fans .......................................... 8
Motors .......................................... 8
10
Coils .......................................... 9
Filters .......................................... 9
Casing .......................................... 10
Drain Pans .......................................... 10
Optional Features .......................................... 11
Engineering Data
General Data .......................................... 14
AC Motors - Concealed type
Standard Delta T .......................................... 14
High Delta T .......................................... 23
AC Motors - Exposed type
Standard Delta T .......................................... 32
High Delta T .......................................... 41
EC Motors - Concealed type
Standard Delta T .......................................... 50
High Delta T .......................................... 54
EC Motors - Exposed type
Standard Delta T .......................................... 58
High Delta T .......................................... 62
Dimensional Drawings
Concealed type - Single Skin .......................................... 66
Concealed type - Double Skin .......................................... 68
Exposed type - Single Skin .......................................... 70
Electrical Data
Wiring Diagram .......................................... 72
General
Coil Orientation .......................................... 73
Mechanical Specification .......................................... 74
Company Profile
with two fully-fledged manufacturing facilities, of about 150,000 sq. ft., located in
At Trosten, it’s all about providing quality HVAC solutions for residential, industrial
and specialized applications. With our strength in providing the right engineering
accommodating different sizes and functions, all built-in features in our computer
satisfaction.
18001:2007 for Occupational Health and Safety management System has ensured
Reliable and innovative technologies are our strength in addressing the demand for
01
Our manufacturing product range includes:
• Ecology Units
TAH series Air Handling Units are Eurovent certified with the best performance of
certified components like AMCA certified fans, UL rated filters and UL rated flexible
connectors are used. Trosten Air Handling Units have been performance tested in
TFC series Fan Coil Units are Eurovent certified, designed for both commercial and
available in both concealed and exposed types, suitable for standard and higher
∆T applications.
TAH series Ecology units are ideal kitchen ventilation products for effective filtration
and odor removal. Factory supplied control panel ensures trouble free operation by
are also available for sustainable and efficient removal of grease and smoke from the
Condensing units and Roof-top Packaged Air conditioners are highly reliable and
energy efficient which are built with environment-friendly R407C / R410A refrigerant
Due to the smooth aesthetics, contemporary looks and rust-free construction, all of
our products are ideal for shopping malls, office complexes, pharmaceutical
02
Quality Assurance
Trosten’s manufacturing facility is ISO 9001:2015 certified for the quality policies and procedures followed
in the manufacturing process. The quality procedures are strictly adhered, to ensure that the final product
Fan Coil Units are Eurovent certified and also by Emirates Authority for Standardization and Metrology
(ESMA) with Emirates Quality Mark for our built quality and safety standards.
The company is always improving and developing its products, therefore the company reserves the right
to make changes to the illustrated products and published details in this catalogue. Certified dimension
03
Selection Program
TROSTEN’s selection software for Fan Coil Units has been designed to suit most users basic needs and
meet their exact requirements. This application is easy to use and produces high quality technical
submittals.
requirements.
application.
The selection procedure is precisely optimized for the type of unit and provides output in an user-friendly
format, with all relevant engineering information about the unit selected, thereby enabling the user to
04
Laboratory Tests
TFC series Trosten fan coil units are Eurovent certified, tested at IMQ Laboratory, Italy. The lab tests have
been conducted for all TFC series fan coil units at standard testing conditions as per the relevant
standards and procedures. The FCUs are tested in wet coil, as well as, dry coil methods for air volume and
Perfomance tests can be conducted at our lab facility, which is design and comply to international
standards like ASHRAE 41.1, ASHRAE 41.2, ASHRAE 41.3, ASHRAE 79, AHRI 440 and EN1397.
The sound tests are conducted as per EN16583:2015 standard, tested in reverberation rooms precision
05
HSE Policies
TROSTEN is committed to provide a healthy and safe work environment to our employees and customers,
at the factory, by ensuring the implementation of commendable health and safety policies. We care for the
environment and our surroundings by minimizing the energy usage, lowering the carbon emission, effective
TROSTEN is ISO 14001:2015 and ISO 45001:2018 certified for the contribution and commitment towards
06
Model Nomenclature
T FC-M 060-4D C S A 5 G
6X: 6 Rows
4D: 4 Rows with High Delta T
Unit Type
6D: 6 Rows with High Delta T C: Concealed Single Skin
4E: 4 Rows with High Delta T & Electric Heater E: Exposed Single Skin
6E: 6 Rows with High Delta T & Electric Heater D: Concealed Double Skin
3H: 3 Rows with Electric Heater B: Exposed Double Skin
** Dimensions
Models from M050 to M085 are available in both Standard and Low height configurations.
All other models are available in standard configuration only.
07
Components
Fans
TROSTEN Fan coil units are equipped with high efficiency, double inlet, double width (DIDW) centrifugal
fans having forward curved blades. Fan housing is made of high quality galvanized sheets. Its side plates
take the shape according to the aerodynamic profile and are fixed with biting-scroll with tapping screws.
Motors
standard feature.
The drive shafts are hardened steel, electroplated with Nickel (Ni) Alloy, for rust-free operation. The motors
also have extended drive shafts on both sides for twin-fan arrangement. High quality, factory sealed ball
bearings that are permanently lubricated for life time, provide excellent performance by minimizing friction.
The motor windings have class B insulation with built-in thermal overload protection for added safety.
Motors are rated for 220-240 V / 1 Ph / 50-60 Hz and 110-127 V / 1 Ph / 60 Hz power supply.
08
Components
Coils
The hydronic cooling coils are of counter flow type with multiple circuits for better cooling performance.
Coils are available in 3 row, 4 row, and 6 row arrangements cooling only applications. For heating and
cooling applications, four pipe systems with 3+1 rows and 4+2 rows are available. Heating coils with four
Filters
drop.
The durable metal frame and reinforcement strips made of galvanized steel sheet encloses the filter media
and provides the long-lasting support for the media. These filters are extremely light weight hence the
removal of the filter is made easy for periodic inspection and cleaning.
09
Components
Casing
Fan coil units are supplied with factory fitted return air plenums having filters at the rear end as a standard
feature. Unit casing is designed using hi-tech 3D modeling and manufactured using high precision
automated sheet metal machineries. The body is very sleek with less casing height, which is suitable for
almost all types of applications. Fan coil units are also available in low height configurations for ceiling
Drain Pans
the tray.
The outer surface of the drain pan is insulated with fire retardant closed cell foam insulation of UL94
standard HF-1 class, preventing dew formation. The drain pan extends the entire length and width of the
cooling coil and pitched towards the drain outlet for easy installation of the unit.
10
Optional Features
EC Motors
New generation fan coil units driven by EC motors are developed to meet the increasing demand of present
environmentally-conscious world for high performance and energy efficient cooling solutions with accurate
controls to maintain the comfort level. The latest developments of EC motors are highly efficient, that is
leading to substantial operation benefits. Its outstanding energy saving feature significantly reduces power
consumption more than 30% than the fan coil units compared with AC motors.
voltage.
units:
power consumption.
• Lower heat dissipation to return air stream,
temperatures.
• Longer bearing life because of electronic soft-start
feature.
• Extremely quite in operation.
11
Optional Features
Units are supplied in double skin casing construction for special applications that demands lower noise
levels and exposed to extreme weather conditions. The double skin panels are made out of 50 mm and
Bottom Entry
Filter Media
SS Drain Pan
12
Optional Features
Electric Heaters
UV Lamps
UV lamps are specially designed to emit germicidal UV and include a glass envelope to filter out harmful,
ozone-forming radiation. UV lamps are installed inside the fan coil units using magnetic fixing brackets and
these lamps come with special housing to prevent human exposure to direct radiation. Power supplies for
the UV lamps are designed with high safety measures and are easily accessible for maintenance.
13
General Data AC Motor
Concealed Type
Standard ∆T
Model
Description Unit
TFC-M020 4X TFC-M035 4X TFC-M045 4X TFC-M050 4X
SWL Lw db (A) 48 55 56 58
Unit Dimensions (W x D x H) mm 822 x 577 x 250 1097 x 577 x 250 1097 x 577 x 250 1152 x 607 x 295
14
General Data AC Motor
Concealed Type
Standard ∆T
Model
Description Unit
TFC-M065 4X TFC-M075 4X TFC-M085 4X
SWL Lw db (A) 59 60 62
Unit Dimensions (W x D x H) mm 1152 x 607 x 295 1202 x 637 x 358 1302 x 637 x 358
15
General Data AC Motor
Concealed Type
Standard ∆T
Model
Description Unit
TFC-M050 4X TFC-M065 4X TFC-M075 4X TFC-M085 4X
SWL Lw db (A) 59 60 61 63
Unit Dimensions (W x D x H) mm 1152 x 607 x 295 1152 x 607 x 295 1202 x 637 x 358 1302 x 637 x 358
16
General Data AC Motor
Concealed Type
Standard ∆T
Model
Description Unit
TFC-M020 4X TFC-M035 4X TFC-M045 4X
SWL Lw db (A) 47 54 55
Unit Dimensions (W x D x H) mm 822 x 577 x 250 1097 x 577 x 250 1097 x 577 x 250
17
General Data AC Motor
Concealed Type
Standard ∆T
Model
Description Unit
TFC-M065 4X TFC-M075 4X
kW 6.28 8.51
Cooling Capacity
Btu/hr 21427 29036
Connection Size-Coil in ¾ FP T ¾ FP T
SWL Lw db (A) 58 59
18
General Data AC Motor
Concealed Type
Standard ∆T
Model
Description Unit
TFC-H060 4X TFC-H090 4X TFC-H120 4X
kW 8 .9 8 9 .4 3 1 1 .7 8
Cooling Capacity *
Btu/hr 30640 32175 40193
Tube Dia. mm 9 .5 2 9 .5 2 9 .5 2
Cooling Coil
SWL Lw db (A) 54 58 63
Unit Dimensions (W x D x H) mm 1125 x 646 x 359 1225 x 646 x 359 1324 x 646 x 359
19
General Data AC Motor
Concealed Type
Standard ∆T
Model
Description Unit
TFC-H140 4X TFC-H190 4X TFC-H240 4X
Tube Dia. mm 9 .5 2 9 .5 2 9 .5 2
Cooling Coil
SWL Lw db (A) 65 65 66
Unit Dimensions (W x D x H) mm 1485 x 680 x 359 1521 x 718 x 410 1675 x 718 x 461
20
General Data AC Motor
Concealed Type
Standard ∆T
Description Unit
TFC-H090 4X TFC-H190 4X
kW 10.98 20.81
Cooling Capacity *
Btu/hr 37464 71004
SWL Lw db (A) 59 66
21
General Data AC Motor
Concealed Type
Standard ∆T
Model
Description Unit
TFC-H060 4X TFC-H120 4X TFC-H140 4X TFC-H240 4X
Motor Type - AC, Single Phase, Permanent Split, Capacitor Run Type
SWL Lw db (A) 53 63 64 65
Unit Dimensions (W x D x H) mm 1125 x 646 x 359 1324 x 646 x 359 1485 x 680 x 359 1675 x 718 x 461
22
General Data AC Motor
Concealed Type
High ∆T
Model
Description Unit
TFC-M020 4D TFC-M035 4D TFC-M045 4D TFC-M050 4D
SWL Lw db (A) 48 55 56 58
Unit Dimensions (W x D x H) mm 822 x 577 x 250 1097 x 577 x 250 1097 x 577 x 250 1152 x 607 x 295
23
General Data AC Motor
Concealed Type
High ∆T
Model
Description Unit
TFC-M065 4D TFC-M075 4D TFC-M085 4D
SWL Lw db (A) 59 60 62
Unit Dimensions (W x D x H) mm 1152 x 607 x 295 1202 x 637 x 358 1302 x 637 x 358
24
General Data AC Motor
Concealed Type
High ∆T
Model
Description Unit
TFC-M050 4D TFC-M065 4D TFC-M075 4D TFC-M085 4D
SWL Lw db (A) 59 60 61 63
Unit Dimensions (W x D x H) mm 1152 x 607 x 295 1152 x 607 x 295 1202 x 637 x 358 1302 x 637 x 358
25
General Data AC Motor
Concealed Type
High ∆T
Model
Description Unit
TFC-M020 4D TFC-M035 4D TFC-M045 4D
SWL Lw db (A) 47 54 55
Unit Dimensions (W x D x H) mm 822 x 577 x 250 1097 x 577 x 250 1097 x 577 x 250
26
General Data AC Motor
Concealed Type
High ∆T
Model
Description Unit
TFC-M065 4D TFC-M075 4D
kW 5.07 6.71
Cooling Capacity
Btu/hr 17299 22895
Connection Size-Coil in ¾ FP T ¾ FP T
SWL Lw db (A) 58 59
27
General Data AC Motor
Concealed Type
High ∆T
Model
Description Unit
TFC-H060 4D TFC-H090 4D TFC-H120 4D
kW 7 .3 0 7 .1 8 9 .9 6
Cooling Capacity *
Btu/hr 24908 24498 33984
Motor Type - AC, Single Phase, Permanent Split, Capacitor Run Type
Tube Dia. mm 9 .5 2 9 .5 2 9 .5 2
Cooling Coil
SWL Lw db (A) 54 58 64
Unit Dimensions (W x D x H) mm 1125 x 646 x 359 1225 x 646 x 359 1324 x 646 x 359
28
General Data AC Motor
Concealed Type
High ∆T
Model
Description Unit
TFC-H140 4D TFC-H190 4D TFC-H240 4D
Motor Type - AC, Single Phase, Permanent Split, Capacitor Run Type
Tube Dia. mm 9 .5 2 9 .5 2 9 .5 2
Cooling Coil
SWL Lw db (A) 65 65 66
Unit Dimensions (W x D x H) mm 1485 x 680 x 359 1521 x 718 x 410 1675 x 718 x 461
29
General Data AC Motor
Concealed Type
High ∆T
Model
Description Unit
TFC-H090 4D TFC-H190 4D
kW 8.23 17.14
Cooling Capacity *
Btu/hr 28081 58482
Motor Type - AC, Single Phase, Permanent Split, Capacitor Run Type
SWL Lw db (A) 59 66
30
General Data AC Motor
Concealed Type
High ∆T
Model
Description Unit
TFC-H060 4D TFC-H120 4D TFC-H140 4D TFC-H240 4D
Motor Type - AC, Single Phase, Permanent Split, Capacitor Run Type
SWL Lw db (A) 53 63 64 65
Unit Dimensions (W x D x H) mm 1125 x 646 x 359 1324 x 646 x 359 1485 x 680 x 359 1675 x 718 x 461
31
General Data AC Motor
Exposed Type
Standard ∆T
Model
Description Unit
TFC-M020 4X TFC-M035 4X TFC-M045 4X TFC-M050 4X
SWL Lw db (A) 48 55 56 58
Unit Dimensions (W x D x H) mm 602 x 587 x 250 878 x 587 x 250 878 x 587 x 250 942 x 587 x 295
32
General Data AC Motor
Exposed Type
Standard ∆T
Model
Description Unit
TFC-M065 4X TFC-M075 4X TFC-M085 4X
SWL Lw db (A) 59 60 62
Unit Dimensions (W x D x H) mm 942 x 587 x 295 992 x 647 x 358 1092 x 647 x 358
33
General Data AC Motor
Exposed Type
Standard ∆T
Model
Description Unit
TFC-M050 4X TFC-M065 4X TFC-M075 4X TFC-M085 4X
SWL Lw db (A) 59 60 61 63
Unit Dimensions (W x D x H) mm 942 x 587 x 295 942 x 587 x 295 992 x 647 x 358 1092 x 647 x 358
34
General Data AC Motor
Exposed Type
Standard ∆T
Model
Description Unit
TFC-M020 4X TFC-M035 4X TFC-M045 4X
SWL Lw db (A) 47 54 55
Unit Dimensions (W x D x H) mm 602 x 587 x 250 878 x 587 x 250 878 x 587 x 250
35
General Data AC Motor
Exposed Type
Standard ∆T
Model
Description Unit
TFC-M065 4X TFC-M075 4X
kW 6.93 9.59
Cooling Capacity
Btu/hr 23645 32721
Connection Size-Coil in ¾ FP T ¾ FP T
SWL Lw db (A) 58 59
36
General Data AC Motor
Exposed Type
Standard ∆T
Model
Description Unit
TFC-B060 4X TFC-B090 4X TFC-B120 4X
kW 9 .3 5 1 0 .1 3 1 2 .9 8
Cooling Capacity *
Btu/hr 31902 34564 44288
Motor Type - AC, Single Phase, Permanent Split, Capacitor Run Type
Tube Dia. mm 9 .5 2 9 .5 2 9 .5 2
Cooling Coil
SWL Lw db (A) 54 58 64
Unit Dimensions (W x D x H) mm 1000 x 750 x 315 1100 x 750 x 315 1200 x 750 x 355
37
General Data AC Motor
Exposed Type
Standard ∆T
Model
Description Unit
TFC-B140 4X TFC-B190 4X TFC-B240 4X
Motor Type - AC, Single Phase, Permanent Split, Capacitor Run Type
Tube Dia. mm 9 .5 2 9 .5 2 9 .5 2
Cooling Coil
SWL Lw db (A) 65 65 66
Unit Dimensions (W x D x H) mm 1360 x 830 x 355 1400 x 850 x 405 1550 x 850 x 455
38
General Data AC Motor
Exposed Type
Standard ∆T
Model
Description Unit
TFC-B090 4X TFC-B190 4X
kW 11.63 22.11
Cooling Capacity *
Btu/hr 39682 75439
Motor Type - AC, Single Phase, Permanent Split, Capacitor Run Type
SWL Lw db (A) 59 66
39
General Data AC Motor
Exposed Type
Standard ∆T
M o d el M o d el
Description Unit
TFC-B060 4X TFC-B120 4X TFC-B140 4X TFC-B240 4X
Motor Type - AC, Single Phase, Permanent Split, Capacitor Run Type
SWL Lw db (A) 53 63 64 65
Unit Dimensions (W x D x H) mm 1000 x 750 x 315 1200 x 750 x 355 1360 x 830 x 355 1550 x 850 x 455
40
General Data AC Motor
Exposed Type
High ∆T
Model
Description Unit
TFC-M020 4D TFC-M035 4D TFC-M045 4D TFC-M050 4D
SWL Lw db (A) 48 55 56 58
Unit Dimensions (W x D x H) mm 602 x 587 x 250 878 x 587 x 250 878 x 587 x 250 942 x 587 x 295
41
General Data AC Motor
Exposed Type
High ∆T
Model
Description Unit
TFC-M065 4D TFC-M075 4D TFC-M085 4D
SWL Lw db (A) 59 60 62
Unit Dimensions (W x D x H) mm 942 x 587 x 295 992 x 647 x 358 1092 x 647 x 358
42
General Data AC Motor
Exposed Type
High ∆T
Model
Description Unit
TFC-M050 4D TFC-M065 4D TFC-M075 4D TFC-M085 4D
SWL Lw db (A) 59 60 61 63
Unit Dimensions (W x D x H) mm 942 x 587 x 295 942 x 587 x 295 992 x 647 x 358 1092 x 647 x 358
43
General Data AC Motor
Exposed Type
High ∆T
Model
Description Unit
TFC-M020 4D TFC-M035 4D TFC-M045 4D
SWL Lw db (A) 47 54 55
Unit Dimensions (W x D x H) mm 602 x 587 x 250 878 x 587 x 250 878 x 587 x 250
44
General Data AC Motor
Exposed Type
High ∆T
Model
Description Unit
TFC-M065 4D TFC-M075 4D
kW 5.61 7.57
Cooling Capacity
Btu/hr 19141 25829
Connection Size-Coil in ¾ FP T ¾ FP T
SWL Lw db (A) 58 59
45
General Data AC Motor
Exposed Type
High ∆T
Model
Description Unit
TFC-B060 4D TFC-B090 4D TFC-B120 4D
kW 7 .6 0 7 .5 4 1 0 .6 2
Cooling Capacity *
Btu/hr 25931 25726 36235
Motor Type - AC, Single Phase, Permanent Split, Capacitor Run Type
Tube Dia. mm 9 .5 2 9 .5 2 9 .5 2
Cooling Coil
SWL Lw db (A) 54 58 64
Unit Dimensions (W x D x H) mm 1000 x 750 x 315 1100 x 750 x 315 1200 x 750 x 355
46
General Data AC Motor
Exposed Type
High ∆T
Model
Description Unit
TFC-B140 4D TFC-B190 4D TFC-B240 4D
Motor Type - AC, Single Phase, Permanent Split, Capacitor Run Type
Tube Dia. mm 9 .5 2 9 .5 2 9 .5 2
Cooling Coil
SWL Lw db (A) 65 65 66
Unit Dimensions (W x D x H) mm 1360 x 830 x 355 1400 x 850 x 405 1550 x 850 x 455
47
General Data AC Motor
Exposed Type
High ∆T
Model
Description Unit
TFC-B090 4D TFC-B190 4D
kW 8.73 18.44
Cooling Capacity *
Btu/hr 29787 62917
Motor Type - AC, Single Phase, Permanent Split, Capacitor Run Type
SWL Lw db (A) 59 66
48
General Data AC Motor
Exposed Type
High ∆T
Model
Description Unit
TFC-B060 4D TFC-B120 4D TFC-B140 4D TFC-B240 4D
Motor Type - AC, Single Phase, Permanent Split, Capacitor Run Type
SWL Lw db (A) 53 63 64 65
Unit Dimensions (W x D x H) mm 1000 x 750 x 315 1200 x 750 x 355 1360 x 830 x 355 1550 x 850 x 455
49
General Data EC Motor
Concealed Type
Standard ∆T
Model
Description Unit
TFC-M020 4X TFC-M035 4X TFC-M045 4X TFC-M050 4X
Unit Dimensions (W x D x H) mm 822 x 577 x 250 1097 x 577 x 250 1097 x 577 x 250 1152 x 607 x 295
50
General Data EC Motor
Concealed Type
Standard ∆T
Model
Description Unit
TFC-M065 4X TFC-M075 4X TFC-M085 4X
Unit Dimensions (W x D x H) mm 1152 x 607 x 295 1202 x 637 x 358 1302 x 637 x 358
51
General Data EC Motor
Concealed Type
Standard ∆T
Model
Description Unit
TFC-H060 4X TFC-H090 4X TFC-H120 4X
kW 8 .9 8 9 .4 3 1 2 .2 8
Cooling Capacity *
Btu/hr 30640 32175 41899
Tube Dia. mm 9 .5 2 9 .5 2 9 .5 2
Cooling Coil
Unit Dimensions (W x D x H) mm 1125 x 646 x 359 1225 x 646 x 359 1324 x 646 x 359
52
General Data EC Motor
Concealed Type
Standard ∆T
Model
Description Unit
TFC-H140 4X TFC-H190 4X TFC-H240 4X
Tube Dia. mm 9 .5 2 9 .5 2 9 .5 2
Cooling Coil
Unit Dimensions (W x D x H) mm 1485 x 680 x 359 1521 x 718 x 410 1675 x 718 x 461
53
General Data EC Motor
Concealed Type
High ∆T
Model
Description Unit
TFC-M020 4D TFC-M035 4D TFC-M045 4D TFC-M050 4D
Unit Dimensions (W x D x H) mm 822 x 577 x 250 1097 x 577 x 250 1097 x 577 x 250 1152 x 607 x 295
54
General Data EC Motor
Concealed Type
High ∆T
Model
Description Unit
TFC-M065 4D TFC-M075 4D TFC-M085 4D
Unit Dimensions (W x D x H) mm 1152 x 607 x 295 1202 x 637 x 358 1302 x 637 x 358
55
General Data EC Motor
Concealed Type
High ∆T
Model
Description Unit
TFC-H060 4D TFC-H090 4D TFC-H120 4D
kW 7 .3 0 7 .1 8 9 .9 6
Cooling Capacity *
Btu/hr 24908 24498 33984
Tube Dia. mm 9 .5 2 9 .5 2 9 .5 2
Cooling Coil
Unit Dimensions (W x D x H) mm 1125 x 646 x 359 1225 x 646 x 359 1324 x 646 x 359
56
General Data EC Motor
Concealed Type
High ∆T
Model
Description Unit
TFC-H140 4D TFC-H190 4D TFC-H240 4D
Tube Dia. mm 9 .5 2 9 .5 2 9 .5 2
Cooling Coil
Unit Dimensions (W x D x H) mm 1485 x 680 x 359 1521 x 718 x 410 1675 x 718 x 461
57
General Data EC Motor
Exposed Type
Standard ∆T
Model
Description Unit
TFC-M020 4X TFC-M035 4X TFC-M045 4X TFC-M050 4X
Unit Dimensions (W x D x H) mm 602 x 587 x 250 878 x 587 x 250 878 x 587 x 250 942 x 587 x 295
58
General Data EC Motor
Exposed Type
Standard ∆T
Model
Description Unit
TFC-M065 4X TFC-M075 4X TFC-M085 4X
Unit Dimensions (W x D x H) mm 942 x 587 x 295 992 x 647 x 358 1092 x 647 x 358
59
General Data EC Motor
Exposed Type
Standard ∆T
Model
Description Unit
TFC-B060 4X TFC-B090 4X TFC-B120 4X
kW 9 .3 5 1 0 .1 3 1 2 .9 8
Cooling Capacity *
Btu/hr 31902 34564 44288
Tube Dia. mm 9 .5 2 9 .5 2 9 .5 2
Cooling Coil
Unit Dimensions (W x D x H) mm 1000 x 750 x 315 1100 x 750 x 315 1200 x 750 x 355
60
General Data EC Motor
Exposed Type
Standard ∆T
Model
Description Unit
TFC-B140 4X TFC-B190 4X TFC-B240 4X
Tube Dia. mm 9 .5 2 9 .5 2 9 .5 2
Cooling Coil
Unit Dimensions (W x D x H) mm 1360 x 830 x 355 1400 x 850 x 405 1550 x 850 x 455
61
General Data EC Motor
Exposed Type
High ∆T
Model
Description Unit
TFC-M020 4D TFC-M035 4D TFC-M045 4D TFC-M050 4D
Unit Dimensions (W x D x H) mm 602 x 587 x 250 878 x 587 x 250 878 x 587 x 250 942 x 587 x 295
62
General Data EC Motor
Exposed Type
High ∆T
Model
Description Unit
TFC-M065 4D TFC-M075 4D TFC-M085 4D
Unit Dimensions (W x D x H) mm 942 x 587 x 295 992 x 647 x 358 1092 x 647 x 358
63
General Data EC Motor
Exposed Type
High ∆T
Model
Description Unit
TFC-B060 4D TFC-B090 4D TFC-B120 4D
kW 7 .6 0 7 .5 4 1 0 .6 2
Cooling Capacity *
Btu/hr 25931 25726 36235
Tube Dia. mm 9 .5 2 9 .5 2 9 .5 2
Cooling Coil
Unit Dimensions (W x D x H) mm 1000 x 750 x 315 1100 x 750 x 315 1200 x 750 x 355
64
General Data EC Motor
Exposed Type
High ∆T
Model
Description Unit
TFC-B140 4D TFC-B190 4D TFC-B240 4D
Tube Dia. mm 9 .5 2 9 .5 2 9 .5 2
Cooling Coil
Unit Dimensions (W x D x H) mm 1360 x 830 x 355 1400 x 850 x 405 1550 x 850 x 455
65
Dimensional Drawings AC & EC
Concealed Type
Single Skin
AA
15
3/4" FPT
25
F
H
D
47
25
DRAIN
B 3/4" MPT
A C
G
X Chilled Water Outlet
10 40 10
24
J
13
13
50
E
TFC-M020 822 646 200 577 250 492 188 492 198 593 427 20
TFC-M035 1097 922 200 577 250 768 188 768 198 869 427 28
TFC-M045 1097 922 200 577 250 768 188 768 198 869 427 29
TFC-M050 1152 986 200 607 295 832 233 832 243 933 453 34
TFC-M065 1152 986 200 607 295 832 233 832 243 933 453 36
TFC-M075 1202 1036 200 637 358 882 296 882 306 983 441 40
TFC-M085 1302 1136 200 637 358 982 296 982 306 1083 441 43
Note:
AA Dimension without extended drain tray.
66
Dimensional Drawings AC & EC
Concealed Type
Single Skin
44 28
3/4" FPT
E
G
C
A B
DRAIN
3/4" MPT
F
49
13
10 40 10
60
I
19
13
DETAIL-X
NTS
D
TFC-H060 1125 646 359 783 255 802 287 1052 363 52
TFC-H090 1225 646 359 883 255 902 287 1152 363 54
TFC-H120 1324 646 359 983 255 1002 319 1252 363 56
TFC-H140 1485 680 359 1002 255 1162 318 1412 363 64
TFC-H190 1521 718 410 1100 255 1198 370 1448 363 72
TFC-H240 1675 718 461 1100 305 1352 421 1602 363 81
67
Dimensional Drawings AC & EC
Concealed Type
Double Skin
3/4" FPT 30
G
C
E
A B
DRAIN
3/4" MPT
F
Chilled Water Outlet
X
Chilled Water Inlet
50
13
25
I
40
90
25
13
19
DETAIL-X
D NTS
H
* Dimensions to be verified with factory before clearing for manufacturing All dimensions are in mm
Weight
Model A B C D E F G H I (kg)
TFC-M020 703 600 315 540 255 540 255 650 485 20
TFC-M035 963 600 315 800 255 800 255 910 485 34
TFC-M045 963 600 315 800 255 800 255 910 485 35
TFC-M050 1033 650 365 870 305 870 305 980 535 41
TFC-M065 1033 650 365 870 305 870 305 980 535 43
TFC-M075 1078 650 415 914 355 914 355 1025 535 47
TFC-M085 1193 650 415 1030 355 1030 355 1140 535 52
68
Dimensional Drawings AC & EC
Concealed Type
Double Skin
3/4" FPT 30
E
G
C
A B
DRAIN
3/4" MPT
50
13
I
25
40
90
25
13
19
D
H DETAIL-X
NTS
TFC-H060 1123 670 365 803 255 940 305 1050 550 55
TFC-H090 1223 670 365 883 255 1040 305 1150 550 60
TFC-H120 1323 670 415 983 255 1140 355 1250 550 67
TFC-H140 1488 730 415 1002 255 1305 355 1415 610 74
TFC-H190 1523 730 465 1100 305 1340 405 1450 610 83
TFC-H240 1678 730 515 1100 305 1495 455 1605 610 92
69
Dimensional Drawings AC & EC
Exposed Type
Single Skin
A
25
E
C
18
B
37
X Chilled Water Outlet
34
44
G
30
10
10.0 10
DETAIL-X
NTS
F
70
Dimensional Drawings AC & EC
Exposed Type
Single Skin
25
E
C
18
B
37
73
34
44
G
30
10
10.0 10
DETAIL-X
NTS
F
* Dimensions to be verified with factory before clearing for manufacturing All dimensions are in mm
Weight
Model A B C D E F G (kg)
71
Wiring Diagram
HIGH HIGH
1
MEDIUM MEDIUM
2
C
LOW LOW
3
4
YELLOW /GREEN
N N
5
L N
10 3
MEDIUM
11 4 YELLOW /GREEN
3 SPEED H
THERMOSTAT 12 5
M LOW
13 6
L
14 7
N
15 8
Ain +V
0 - 10 VDC 1
C
CONTROLLER
GND
2
+10V SMPS
3 DC N
N L
4
L
5
N L
AC 220-240V / 1Ph / 50-60 Hz
72
Coil Orientation
Pipe Sizing
The supply and return pipes shall be selected according to the system operating or shut-off pressure whichever
is high and the flow rate at maximum load.
Valve Selection
The control valves shall be selected as per the scheme specified in the contract technical drawings.
The pressure rating of the valves shall be carefully selected by considering the system operating and shut-off
pressures.
Flow Control
The flow control method shall be with either 2-way or 3-way configuration as per the customer’s
requirement. The control valve shall be electronically modulating or on-off for 2-way and diverting type for 3-way
control method. The valve actuators shall be selected for sufficient power to handle the valve’s close-off
pressure.
Drain Piping
Condensate drain pipe connecting the drain tray and the main drain riser should be at least 25mm dia. insulated
with 6 mm thick wrap around insulation material. The pipe should be connected with a 50 mm (2”) U trap and
pitched properly towards the flow.
73
Mechanical Specification
General
Supply and install as indicated in the schedule of equipment. Fan Coil Units shall be selected to meet the duty
as mentioned in the schedule of equipment. The space available for the unit to be physically verified at the site
and the dimensions of the units shall be selected to fit into the spaces available. Units shall be
horizontal / vertical, blow through / draw through type suitable for concealed / exposed installation as mentioned
in the schedule of equipment. All units shall be complete with multi-row deep, finned chilled water coil, one or
more centrifugal blowers, motor, aluminium cleanable filter with filter box, insulated drain pan along with controls
as specified.
Manufacturer / manufacturer’s representative should carry enough stock of spares including fans, motors, etc.,
locally to minimize breakdown response time. The stock of spares shall be witnessed by Client / Consultant for
necessary approval.
Manufacturer should have their own psychrometric laboratory and test perform as per the project condition if
required.
Quality Assurance
The equipment manufacturer shall strictly adhere to the following standards & specifications.
1. Eurovent Certification
2. ISO 9001: 2015 certification for Quality Management Systems
3. ISO 14001:2015 certification for Environmental Management Systems
4. OHSAS 18001:2007 certification for Occupational Health and Safety
Unit Construction
The unit casing shall be constructed of heavy gauge galvanized steel sheet high corrosion resistance. Horizontal
base unit with plenum for concealed installation shall have a factory installed, galvanized steel plenum section
and washable filter. The plenum shall be either bottom or rear return, lined with fire retardant open cell acoustic
type insulation and shall include a removable panel to provide access to the fan / motor assembly.
Unit casing for exposed installation shall be constructed of steel with baked enamel finish. Casing shall be lined
with fire retardant foam insulation and shall have removable bottom access panel. Unit shall be provided with
throw-away filter and integral double deflection supply air grille.
74
Mechanical Specification
Fan
Fans shall be of the metallic construction, centrifugal and forward curved type, direct driven by a double-side
shaft motor. Fans shall be statically and dynamically balanced in a suitably designed and fabricated G.I sheet
housing. Resin material blowers and housings are not acceptable.
Motor
Fan motors shall be of the PSC type, fractional horse power of suitable rating & suitable for 220V, 50-60 Hz, single
phase AC supply. Motors shall have built-in thermal overload protection. Motors shall have a minimum of
3-speed windings and shall be factory wired to a terminal block mounted on the unit housing. Motor components
shall be UL recognized. Fan motor shall have 5 speed options providing the flexibility of choosing required
3 speed as per actual ESP conditions.
Cooling Coil
All cooling coils shall be of standard 3 / 4 / 6 row deep, staggered type and suitable for installation in a
2-pipe system. Coils shall have minimum 9 mm OD seamless copper tubes with aluminium fins that are bonded
to the tubes by mechanical expansion and have a working pressure of 16 bars. Each coil shall have a manual air
vent and threaded brass adaptor connections. Cooling coil should be certified for AHRI 410.
Wherever specified, units shall be equipped with a 2 row deep (minimum), hot water heating coil for installation
in a 2 pipe system. Construction of the hot water coil shall be same as that of chilled water coil mentioned above.
For the ease of service, units should be designed for coil removal from the bottom without bringing down the unit.
The casing should have hexagonal cutout to hold the hexagonal brass adaptor so that any torque applied during
plumbing, doesn’t affect the brazed joints of the coils. Coils shall be provided with factory installed purge valve
system, wherein, the hose from the purge valve shall be connected to the drainpan inside the unit.
Drain Pan
The drain pan shall be of heavy gauge galvanized sheet with powder coated finish extending the entire length
and width of the coil. Drain pan shall be insulated with fire retardant insulation from outside and powder coated
from inside to avoid rusting.
Casing design should allow the drainpan removal from the bottom without bringing down the unit.
Filter
Units shall be provided with washable aluminium filters.
75
Mechanical Specification
Installation
Units shall be suspended from the building structure using steel fasteners and suspender rods through rubber-in
shear grommets for vibration isolation.
Accessories
Control and monitoring of units shall be as shown in the drawings (either by RMS, BMS or standalone).
76
Ref:TR/CAT/FCU/2021/R9
ANNEXURE 3
Supplier Profile
CHAIRMAN
MANAGEMENT & SALES TEAM Farhan Morsal M A Al-Shammari
APPLICATION ENGINEER
Gowtham
APPLICATION ENGINEER
Kirubakaran
GENERAL MANAGER
SERVICE TEAM Thulasiram Sathianathan
SERVICE MANAGER
Rajaganesh
HELPER HELPER
ANNEXURE 4
Company Legal Documents
><Bar Code
**109451
5000045500 ﺭﻗﻢ ﺍﻟﺘﺴﺠﻴﻞ ﺍﻟﻀﺮﻳﺒﻲ: 109451 ﺭﻗﻢ ﺍﻟﺴﺠﻞ ﺍﻟﺘﺠﺎﺭﻯ:
ﺍﻟﺴﻤﺔ ﺍﻟﺘﺠﺎﺭﻳﺔ: ﻣﺎﻓﻴﻦ ﻟﻠﺘﺠﺎﺭﻩ ﻭﺍﻟﺘﺮﻛﻴﺐ ﺍﻷﺳﻢ ﺍﻟﺘﺠﺎﺭﻯ:
27/12/2023 ﺗﺎﺭﻳﺦ ﺍﻧﺘﻬﺎﺀ ﺍﻟﺴﺠﻞ: 28/12/2017 ﺗﺎﺭﻳﺦ ﺍﻧﺸﺎﺀ ﺍﻟﺴﺠﻞ:
100000 ﺭﺍﺱ ﺍﻟﻤﺎﻝ: ﺷﺮﻛﺔ ﺫﺍﺕ ﻣﺴﺌﻮﻟﻴﺔ ﻣﺤﺪﻭﺩﺓ ﺍﻟﺸﻜﻞ ﺍﻟﻘﺎﻧﻮﻧﻰ:
ﻗﻄﺮ ﺟﻨﺴﻴﺔ ﺍﻟﻤﻨﺸﺄﺓ: ﻧﺸﻂ ﺣﺎﻟﺔ ﺍﻟﺴﺠﻞ:
0 ﻋﺪﺩ ﺍﻟﻔﺮﻭﻉ:
ﻣﻌﻠﻮﻣﺎﺕ ﺍﻻﺗﺼﺎﻝ
+97466925391 ﺃﺭﻗﺎﻡ ﺍﻻﺗﺼﺎﻝ: 35376 ﺻﻨﺪﻭﻕ ﺍﻟﺒﺮﻳﺪ:
ﺍﻟﺸﺮﻛﺎﺀ
Page 1 of 2
ﺭﻗﻢ ﺍﻟﺴﺠﻞ 109451 :
ﺗﺸﻬﺪ ﻏﺮﻓﺔ ﺗﺠﺎﺭﺓ ﻭ ﺻﻨﺎﻋﺔ ﻗﻄﺮ ﺑﺎﻥ ﺍﻟﻤﻨﺸﺎﺓ ﺍﻟﻤﺬﻛﻮﺭﺓ ﺍﻋﻼﻩ ﺳﺠﻠﺖ ﻟﺪﻳﻨﺎ
Qatar Chamber certifies that the above mentioned establishment has been registered
><Bar Code
ﺻﻼﺣﻴﺎﺕ ﻛﺎﻣﻠﺔ ﻭﻣﻄﻠﻘﺔ -ﻣﺪﻳﺮ ﻗﻄﺮ 28163400035 ﻓﺮﺣﺎﻥ ﻣﺮﺳﺎﻝ ﻣﻄﻠﻖ ﺍﻟﻮﺑﻴﺮﻯ ﺍﻟﺸﻤﺮﻯ
ﺍﻷﻧﺸﻄﺔ ﺍﻟﺘﺠﺎﺭﻳﺔ
Page 2 of 2
ﺭﻗﻢ ﺍﻟﺴﺠﻞ 109451 :
ﺗﺸﻬﺪ ﻏﺮﻓﺔ ﺗﺠﺎﺭﺓ ﻭ ﺻﻨﺎﻋﺔ ﻗﻄﺮ ﺑﺎﻥ ﺍﻟﻤﻨﺸﺎﺓ ﺍﻟﻤﺬﻛﻮﺭﺓ ﺍﻋﻼﻩ ﺳﺠﻠﺖ ﻟﺪﻳﻨﺎ
Qatar Chamber certifies that the above mentioned establishment has been registered
Issue Date:
Page No: 1
*109451*
Issue Date: 10/11/2022
Partners
Page 1 of 2
CR No : 109451
ﺗﺸﻬﺪ ﻏﺮﻓﺔ ﺗﺠﺎﺭﺓ ﻭﺻﻨﺎﻋﺔ ﻗﻄﺮ ﺑﺄﻥ ﺍﻟﻤﻨﺸﺎﺓ ﺍﻟﻤﺬﻛﻮﺭﺓ ﺍﻋﻼﻩ ﺳﺠﻠﺖ ﻟﺪﻳﻨﺎ
Qatar Chamber certifies that the above mentioned establishment has been registered
Issue Date:
Page No: 1
Business Activities
Page 2 of 2
CR No : 109451
ﺗﺸﻬﺪ ﻏﺮﻓﺔ ﺗﺠﺎﺭﺓ ﻭﺻﻨﺎﻋﺔ ﻗﻄﺮ ﺑﺄﻥ ﺍﻟﻤﻨﺸﺎﺓ ﺍﻟﻤﺬﻛﻮﺭﺓ ﺍﻋﻼﻩ ﺳﺠﻠﺖ ﻟﺪﻳﻨﺎ
Qatar Chamber certifies that the above mentioned establishment has been registered
><Bar Code
2022/11/14 ﺗﺎﺭﻳﺦ ﺍﻟﻄﺒﺎﻋﺔ:
No 1 of 1 ﺻﻔﺤﺔ ﺭﻗﻢ:
ﺭﺧﺼﺔ ﺗﺠﺎﺭﻳﺔ
**145491
2018/01/02 ﺗﺎﺭﻳﺦ ﺍﺻﺪﺍﺭ ﺍﻟﺮﺧﺼﺔ: 145491 ﺭﻗﻢ ﺍﻟﺮﺧﺼﺔ:
2023/12/27 ﺗﺎﺭﻳﺦ ﺍﻧﺘﻬﺎﺀ ﺍﻟﺮﺧﺼﺔ: ﻣﺎﻓﻴﻦ ﻟﻠﺘﺠﺎﺭﻩ ﻭﺍﻟﺘﺮﻛﻴﺐ ﺍﻷﺳﻢ ﺍﻟﺘﺠﺎﺭﻯ:
109451 ﺭﻗﻢ ﺍﻟﺴﺠﻞ ﺍﻟﺘﺠﺎﺭﻯ: ﺷﺮﻛﺔ ﻧﻮﻉ ﺍﻟﻤﻨﺸﺄﺓ ﺍﻟﺘﺠﺎﺭﻳﺔ:
ﺍﻟﺴﻤﺔ ﺍﻟﺘﺠﺎﺭﻳﺔ:
The General Tax Authority of Qatar certifies that the ﺗﺸﻬﺪ اﻟﻬﻴﺌﺔ اﻟﻌﺎﻣﺔ ﻟﻠﻀﺮاﺋﺐ ﻓﻲ دوﻟﺔ ﻗﻄﺮ أن
entity is registered as per the following details: :اﻟﺠﻬﺔ أدﻧﺎه ﻣﺴﺠﻠﺔ ﺣﺴﺐ اﻟﺒﻴﺎﻧﺎت اﻟﺘﺎﻟﻴﺔ
:اﻟﺸﻜﻞ اﻟﻘﺎﻧﻮﻧﻲ
Legal Form: ﺷﺮﻛﺔ ذات ﻣﺴﺆوﻟﻴﺔ ﻣﺤﺪودة
Limited Liability Company
Activity Commencement :ﺗﺎرﻳﺦ ﺑﺪئ اﻟﻨﺸﺎط
28/12/2017
Date:
Number of Branches: 0 :ﻋﺪد اﻟﻔﺮوع
05/07/2022 ﺍﻟﺘﺎﺭﻳﺦ:
ﺷﻬﺎﺩﺓ ﻣﻨﺸﺄ
ﻟﻠﻤﻨﺘﺠﺎﺕ ﺍﻟﻮﻃﻨﻴﺔ ﻟﺪﻭﻝ ﻣﺠﻠﺲ ﺍﻟﺘﻌﺎﻭﻥ ﻟﺪﻭﻝ ﺍﻟﺨﻠﻴﺞ ﺍﻟﻌﺮﺑﻴﺔ
ﺍﻟﻮﺯﻥ)ﻛﺠﻢ( )ﺍﺧﺘﻴﺎﺭﻱ(
ﻋﺪﺩ ﺍﻟﻄﺮﻭﺩ ﻭﻧﻮﻋﻬﺎ ﻭﺻﻒ ﺍﻟﺴﻠﻊ ﺭﻣﺰ ﺍﻟﻨﻈﺎﻡ ﺍﻟﻤﻨﺴﻖ
ﺍﻟﺼﺎﻓﻲ ﺍﻟﻘﺎﺋﻢ HS code
5160ﻛﻴﻠﻮ ﺟﺮﺍﻡ 5650ﻛﻴﻠﻮ ﺟﺮﺍﻡ 9ﻛﺮﺗﻮﻥ ﻗﻄﻊ ﻏﻴﺎﺭ ﺃﺟﻬﺰﺓ ﺗﻜﻴﻴﻒ ﺍﻟﻬﻮﺍﺀ
ﺗﺼﺎﺩﻕ ﻭﺯﺍﺭﺓ ﺍﻟﺘﺠﺎﺭﺓ ﻭﺍﻟﺼﻨﺎﻋﺔ ﻭﺗﺮﻭﻳﺞ ﺍﻻﺳﺘﺜﻤﺎﺭ ﺑﺴﻠﻄﻨﺔ ﻋﻤﺎﻥ ﺑﺄﻥ ﺍﻟﻤﻌﻠﻮﻣﺎﺕ ﻭﺍﻟﺴﻠﻊ
ﺍﻟﻤﻮﺿﺤﺔ ﺗﻔﺎﺻﻴﻠﻬﺎ ﺃﻋﻼﻩ ﺻﺤﻴﺤﺔ.
ﻭﺛﻴﻘﺔ ﺭﻗﻤﻴﺔ ﻣﺼﺪﻗﺔ ﺭﻗﻤﻴًﺎ ﺻﺎﺩﺭﺓ ﻣﻦ ﺍﺳﺘﺜﻤﺮ ﺑﺴﻬﻮﻟﺔ .ﻟﻤﺮﺍﺟﻌﺔ ﺻﺤﺔ ﺍﻟﺒﻴﺎﻧﺎﺕ ﺍﻟﻮﺍﺭﺩﺓ ﻓﻲ
ﺍﻟﻮﺛﻴﻘﺔ ،ﻭﻟﻤﺰﻳﺪ ﻣﻦ ﺍﻟﺘﻔﺎﺻﻴﻞ ،ﻳﺮﺟﻰ ﺯﻳﺎﺭﺓ ﺑﻮﺍﺑﺔ ﺍﺳﺘﺜﻤﺮ
www.business.gov.om/portal/inquiryCertificateOfOrigin
ﺑﺴﻬﻮﻟﺔ ﺍﻟﺮﻗﻤﻴﺔ ﻋﺒﺮ ﺍﻟﺮﺍﺑﻂ.
Warranty Certificate
In reference to the proposal for supply of Trosten Make Fan Coil Unit, this is to
confirm that the supplied 2 Nos. units with the Model No. XXXXXX shall be covered
under Warranty till xx/xx/xxxx. It is equivalent to the 15 Months from the date of
commissioning or 12 months from the date of supply, whichever is earlier.
This covers replacement of parts only. The warranty does not include any LABOUR
charges or CONSUMABLES. Warranty is null and void if there is no periodical servicing
of the unit.
Thulasiram Sathianathan
General Manager
C.R. 109451
Doha, Qatar.
Mobile – 00974 77887941
E-mail : thulasiram@maven-trading.com
Website : www.maven-trading.com
ANNEXURE 7
Authorized Distributor Letter
ANNEXURE 8
Previous Approvals
The received material submittal is accepted.
23-10-2022
LOCATION:DOHA PORT
16-08-2022
CONTRACTOR'S SUBMITTAL FOR APPROVAL OF MATERIALS
JOB No. : 22566
JOB TITLE : SUPPLY AND INSTALLATION OF AHU 201 AT QAFCO
CONTRACTOR : EMCO, QATAR
Submittal No : 22566/QAFCO/MECH/MA-04 Rev.02 New Submittal :
Date : 15-May-22 Resubmittal :
, Equivalent , Alternative Tracking no. : MA-08
Signed : Mohamed Idris
MANUFACTURER/SUPPLIER:-
Company Name : TROSTEN QAFCO
Address : OMAN USE ONLY
Local Agent : M/S MAVEN TRADING, QATAR
Sub-Contractor : Tel No. APPROVED
DELIVERY:- :
Country of Origin : OMAN
Availability : Locally Manufactured [ ] APPROVED
GCC Manufactured [ ] AS NOTED
Manufacture : Production period [ 10-12 WEEKS ] (Confirmation is Reqd.)
Delivery Ex-works [ 4 - 6WEEKS ]
Total delivery time [ 12-18 WEEKS ] SAMPLE
REQUIRED
Transport : Overland [ ]
Sea Freight [ ]
Total Freight [ ]
Total Quantity : TEST IS REQUIRED
PROGRAMME:-
Date material required on Site : ADDITIONAL
Estimated date of arrival on Site : 31.07.2022 INFORMATION
REQUIRED
REVISE AND
RESUBMIT
NOT
QAFCO ENGINEER (YES / NO) APPROVED
2 Qatari Diar - Lusail command centre FD Consultant Almana Networks FCU 2021
AHU, FAHU,
8 Westminster School Al Wakra Qatar GAJ Trinity Engineering Qatar 2013
FCU
11 Texas Chicken at Madinat Central UDC Convert Engineering & Trading FAHU 2021
AHU, FAHU,
12 Cheese cake factory - Villagio mall Consistent Blue Print 2016
ECU
AHU, FAHU,
13 Cheese cake factory- mall of qatar Consistent Blue Print 2016
ECU
AHU, FAHU,
14 Cheese cake factory - Doha festival city Consistent Blue Print 2016
ECU
AHU, FAHU,
15 Katsuya - Villagio mall Consistent Decortip Qatar 2016
ECU
TROSTEN QATAR PRESTIGIOUS PROJECT INSTALLATIONS
SCOPE OF SUPPLY
Si.No. PROJECT Pictures MEP Consultant MEP CONTRACTOR
PRODUCT YEAR
16 Palm City Qatar AEB Al Malki Trading & Contracting FAHU+FCU 2016
S Mehboob &
17 Carrefour @ Mirquab mall Diplomat Group FCU+ECU 2016
company
AHU, FAHU,
18 GEMS SCHOOL-QATAR GAJ Trinity Engineering 2012
FCU
This document is valid at the date of issue - Check the current validity on:
Document valable à la date d’émission - Vérifier la validité en cours sur :
www.eurovent-certification.com
Participant/Titulaire
TROSTEN INDUSTRIES COMPANY LLC.
PO Box 5389
Dubai, United Arab Emirates
This certificate is issued by Eurovent Certita Certification Ce certificat est délivré par Eurovent Certita Certification dans
according to the certification rules: les conditions fixées par le référentiel :
ECP FCU - « Fan Coil Units » in force at established ECP FCU – « Ventilo-convecteurs » en vigueur à date
date. d’édition.
Pursuant to the decision notified by Eurovent Certita En vertu de la décision notifiée par Eurovent Certita
Certification, the right to use the mark ECP shall be Certification, le droit d'usage de la marque ECP, est accordé à
granted to the beneficiary company for all products la société qui en est bénéficiaire pour les tous les produits
inside the defined scope according to “certify-all” entrant dans le champ d'application défini selon le principe
principle and in the conditions defined by the “certify-all” et dans les conditions définies par le programme
certification program mentioned. de certification mentionné.
Unless withdrawn or suspended, this certificate remains Sauf retrait ou suspension, ce certificat demeure valide tant
valid as long as the requirements for the certification que les conditions du référentiel du programme de certification
program framework are met. The validity of the sont respectées. La validité du certificat est à vérifier sur le site
certificate is to be verified on www.eurovent- Internet www.eurovent-certification.com
certification.com
CE CERTIFICAT A ÉTÉ EMIS LE 25/08/2020
THIS CERTIFICATE HAS BEEN ISSUED ON 25/08/2020 CE CERTIFICAT EST VALIDE JUSQU’AU 15/02/2021
THIS CERTIFICATE IS VALID UNTIL 15/02/2021
1/2
EUROVENT CERTITA CERTIFICATION SAS au capital de 100 000 € - 48-50 rue de la Victoire 75009 Paris - FRANCE
Tel. : 33 (0)1 75 44 71 71 - 513 133 637 RCS Paris - SIRET 513 133 637 000 35 - TVA FR 59513133637
S06 D06 TEMPLATE_ECP_Certify_All_Rev1.0
CERTIFICATE
N° 19.12.026
Appendix / Annexe
Granted on December 20, 2019 - Date 1ère admission 20 décembre 2019
This document is valid at the date of issue - Check the current validity on:
Document valable à la date d’émission - Vérifier la validité en cours sur :
www.eurovent-certification.com
2/2
EUROVENT CERTITA CERTIFICATION SAS au capital de 100 000 € - 48-50 rue de la Victoire 75009 Paris - FRANCE
Tel. : 33 (0)1 75 44 71 71 - 513 133 637 RCS Paris - SIRET 513 133 637 000 35 - TVA FR 59513133637
S06 D06 TEMPLATE_ECP_Certify_All_Rev1.0
ANNEXURE 11
Equipment Schedule
Project Name : Jollibee @ Al Khor Mall- Q60641 Client : Moonlight Fit-out
Location : Al Khor Mal
Consultant :
Manufacturer : Trosten
Supplier : Maven Trading & installation WLL
SPECIFIED
AIR FLOW COOLING COIL AIR TEMP. AIR TEMP.
UNIT REF (CFM) CAPACITY Entering(F) LEVING (F) Water flow EPD (Pa) QT Y
TR GPM
TOTA SENSIB DB WB DB WB
TR TR
FCU-01 1060 2.60 2.08 77.6 64.8 55.9 54.9 6 75 1
FCU-02 1590 3.95 3.61 77.8 64.8 55.9 54.9 9.5 75 1
ANNEXURE 12
Technical Datasheet
General Data AC Motor
Concealed Type
High ∆T
Model
Description Unit
TFC-M050 4D TFC-M065 4D TFC-M075 4D TFC-M085 4D
SWL Lw db (A) 59 60 61 63
Unit Size (w x d x h) mm 942 x 577 x 295 942 x 577 x 295 992 x 637 x 358 1092 x 637 x 358
25
General Data AC Motor
Concealed Type
High ∆T
Model
Description Unit
TFC-H140 4D TFC-H190 4D TFC-H240 4D
Motor Type - AC, Single Phase, Permanent Split, Capacitor Run Type
Tube Dia. mm 9 .5 2 9 .5 2 9 .5 2
Hydronic Coil
SWL Lw db (A) 65 65 66
Dimensions (w x h x d) mm 1485 x 680 x 359 1521 x 718 x 410 1675 x 718 x 461
29
Fan-Coil Selection Report
Project Information
Unit Ref. Country United Arab Emirates
Region Dubai Building Type Default
Altitude 16.00m Atmospheric pressure 101.26Kpa
Fan Coil Location
Series TFC H 4D High Static Ducted(4 Rows):Single Skin
Filter 1” Aluminium
Filter 1” Aluminium
Concealed Type
Single Skin
A
25
25
E
G
C
18
B
37
25
F
34
44
I
30
10
10.0 10
DETAIL-X
NTS
D
TFC-M020 4XCS 602 577 250 492 188 492 200 572 406 18
TFC-M035 4XCS 878 577 250 768 188 768 200 848 406 26
TFC-M045 4XCS 878 577 250 768 188 768 200 848 406 27
TFC-M050 4XCS 942 577 295 832 233 832 245 912 406 32
TFC-M065 4XCS 942 577 295 832 233 832 245 912 406 34
TFC-M075 4XCS 992 637 358 882 296 882 308 962 466 38
TFC-M085 4XCS 1092 637 358 982 296 982 308 1062 466 41
66
Dimensional Drawings AC & EC
Concealed Type
Single Skin
44 28
3/4" FPT
E
G
C
A B
DRAIN
3/4" MPT
F
49
13
10 40 10
60
I
19
13
DETAIL-X
NTS
D
TFC-H060 4XCS 1125 646 359 783 255 802 287 1052 363 52
TFC-H090 4XCS 1225 646 359 883 255 902 287 1152 363 54
TFC-H120 4XCS 1324 646 359 983 255 1002 319 1252 363 56
TFC-H140 4XCS 1485 680 359 1002 255 1162 318 1412 363 64
TFC-H190 4XCS 1521 718 410 1100 255 1198 370 1448 363 72
TFC-H240 4XCS 1675 718 461 1100 305 1352 421 1602 363 81
67