Professional Documents
Culture Documents
COLLEGE OF ENGINEERING
DEPARTMENT OF ELECTRICAL & COMPUTER ENGINEERING
1. The system data for the load flow solution are given in the tables. Determine the
voltages at the end of the first iteration by G-S method. Take α = 2.0
Table 1 Line Admittances:
Bus code Admittance in p.u Bus P Q V Remarks
1-2 1-j5 1 - - 1.05 Slack
1-3 2-j4 2 0.4 0.5 - PQ
1-4 3-j8 3 0.2 0.4 - PQ
2-3 4-j6 4 0.5 0.1 - PQ
2-4 5-j2
3-4 2-j8
2. For the following power system, determine the voltages at the end of first iteration by
G-S method and consider α = 1.5.
Bus P Q V Remarks
1 - - 1.08 Slack
2 0.2 0.1≤Q2≤1 1.06 PV bus
3 0.4 0.2 - PQ bus
4 0.5 0.4 - PQ bus
2 2-j5 3-j10
1-j5 3
G 4-j2 6-j5
4
WOLAITA SODO UNIVERSITY
COLLEGE OF ENGINEERING
DEPARTMENT OF ELECTRICAL & COMPUTER ENGINEERING
3. For the two bus power system shown below, use the Newton-Raphson power flow to
determine the voltage magnitude and angle at bus two. Assume that bus one is the
slack and SBase = 100 MVA.
4. The generator shown in figure is delivering power to an infinite bus. Take Vt is 1.1
p.u. Find the maximum power that can be transferred when the system is healthy and
one line is open.
Pm = 1.0 p.u j0.6
Vt T1 Infinite bus
G
1.0 p.u
0.2 p.u 0.1 p.u j0.6
Prepared by:
Dr.M.KARTHIKEYAN Date: _______ _ Signature: _
---------------------------****-----------------------------****-------------------------****------------------------