Professional Documents
Culture Documents
CATALOGUE
NO. 2
CONTENT
Submitted -Rev
Multicore Cables Local Brand 07/12/2022 01
132kV Termination Kits G&W 27/12/2022 Submitted -Rev
02
11kV Termination Kits 3M 07/12/2022 Submitted -Rev
01
RAYCHEM 27/12/2022 Submitted -Rev
02
Earthing Materials Local Brand 07/12/2022 Submitted -Rev
01
Cable Ladder & Local Brand 07/12/2022 Submitted -Rev
Accessories 01
Telecommunication IOB 06/01/2022
33/11kV Equipment Supplier Submission Remarks
Date
33kV Secondary ETD 24/12/2022 Drawing
Panels with relay Submitted
RTU Dong Fang 07/12/2022 Submitted -Rev
01
07/12/2022
DC System Nimac/Power Submitted -Rev
Cap 01
Energy Division
http://energy.tycoelectronics.com
Features:
R
EPP038911/02 22.10.2002 18:05 Uhr Seite 5
Over the last three decades, engi- Universal Selection Procedure Simplified Installation
neers in utilities and industry around • Simplifield selection table allows • Components are lightweight and
the world have specified of million’s quick selection based on conductor non-shattering
Raychem cable terminations at cross section and voltage class for • Clear instruction sheets
distribution voltages up to 36 kV. either polymeric or MIND paper • Common installation procedure for
Raychem terminations have be- insulated cables (For MI draining oil polymeric and MIND paper cables
come identified with reliability be- cables, contact your local represen- • Factory engineered kit permits rapid
cause of their unparalleled long- tative) on-site installation
term performance – where it really • Simple modification codes permit • No mechanical stress at insulation
counts – in the field. Today there are easy specification of optional screen cutback
many changes influencing the distrib- accessory kits • Termination accommodates same
ution of power at medium voltages. • Enhanced range-taking ability bending radius as cable
For example, the transition to new means that one kit fits more con- • Visual confirmation of correct
types of polymeric cable, distribution ductor sizes, reducing stocking assembly sequence possible after
at higher voltages, and the wide- requirements installation
spread usage of compact switchgear. • Unlimited shelf life allows stocking • Rain skirts can be installed to allow
of economic quantities without either top or bottom feed
Anticipating these industry changes, product spoilage • No soldering of earthing accessories
we have continued to extend and required
improve the product range, based on Simplifield Cable Preparation
the extensive experiece both in the • Improved treatment of screen cut Outstanding Long-Term Reliability
field and at our outdoor test sites in back is compatible with all modern • Fully sealed against water ingress
coastal, polluted and desert environ- screen removal techniques from the environment or from within
ments. Now these developments are • No tapering of insulation required the conductor strands
incorporated in a new generation of • No polishing of polymeric insulation • Polymeric materials load cycle with
Raychem heat-shrinkable cable termi- surface the cable without mechanically
nations, that are even easier to select • No special preparation of sectored, stressing termination components
and install, without compromising or eccentric conductors, or of cable and sealants
the reliability of proven materials that is curved after unreeling from • Unsurpassed performance in
technology. The improved system is the cable drum polluted environments, proven
simpler to use, because the basic ter- • Cable preparation steps are similar over three decades.
mination components and installation to those for Raychem joints
steps are the same – even if your net-
work operates with voltages of 7.2 to
36 kV; if you use 12 kV belted paper
cable and 24 kV water-blocked single
core polymeric cable; whether you
make equipment connections in a
cable box or in compact switchgear.
Let’s review the main advantages of
the improved system:
void filling compound oil barrier, insulating tubing (clear) rain skirts installed over
installed over paper insulation non-tracking sleeve
stress control tubing
otherwise, installation is the same as otherwise, installation is the same as
non-tracking sleeve with for a polymeric insulated cable for an indoor termination
sealant layer
The Tyco Electronics Energy Division All our indoor terminations for poly-
meric or paper insulated cables
can be used with RICS (Raychem
Insulated Connection System).
The RICS, fully insulated, right-angle
and straight adaptors make it easy to
connect any type of cable to modern
compact electrical equipment.
A special RICS, accommodating a
ZnO Surge Arrester is now available
as well as a low profile, one piece
cable termination (IXSU), designed
specifically for applications with very
limited clearances between phases.
All of the above information, including drawings, illustrations and graphic designs, reflects our present understanding and is to the best of our knowledge and belief correct and reliable.
Users, however, should independently evaluate the suitability of each product for the desired application. Under no circumstances does this constitute an assurance of any particular
quality or performance. Such an assurance is only provided in the context of our product specifications or explicit contractual arrangements. Our liability for these products is set forth
in our standard terms and conditions of sale. ALR, AMP, AXICOM, B&H, BOWTHORPE EMP, CROMPTON INSTRUMENTS, DORMAN SMITH, DULMISON, GURO, HELLSTERN,
LA PRAIRIE, MORLYNN, RAYCHEM, and SIMEL are trademarks.
For more information and your country contact person, please visit us at:
http://energy.tycoelectronics.com
Tyco Electronics Raychem GmbH, Energy Division
Finsinger Feld 1, 85521 Ottobrunn/Munich, Germany
Phone: +49-89-6089-0, Fax: +49-89-6096345
SUDKABEL
CONTAINER
MATERIAL
TNB RESEARCHSDN. BHD,
OUALITY ASSURANGESERVICES VJrcx/Jsl"^Lseaa
OFPRODUCT
CERTITICATI ACCTPTANC Setial No : D2009-00158
_
SUBSTATION
DOORANDWINDOWPANELFORDISTRIBUTION
GRPCOMPOSITE
S|NGLELEAF(80000093)
& DoUBLE LEAF(80000094)
The above equipment has complied with ihe mandatory rcquirementsof the Technical
Specificationnamed below and is heteby acceptedfor use in the.TNB system by the
Quality Assurance Unit, TNB Researchwho ha3 been appointed by Tenaga Nasional
Berhadas the productquality cettificationand inspectionbody
.la.lr)ti!i.iu..,
is vatiofrom2orhAugust2oo9 io 'lgrhAugust2012
rrris certiticate
td ,tutyzooa
This Logo no
longer needed in
new latest design
This is latest
approved signage
(only 1 language)
This Logo no
longer needed in
new design
This is latest
approved signage
(only 1 language)
This is not the latest
approved signage
(subjected to
special request if
needed)
The wall is complete and ready for painting, texture coating, wallpaper or even tiling application.
Recommended
Recommended
Recommended
Recommended
A118 L9
Recommended
fastener - fastener -
Wing Tek 28mm C1 Wing Tek 32mm C1
Self-embedding head Self-embedding head
wing tek screw, wing tek screw,
#8 x 1 1/8" (28mm) #8 x 1 1/4" (32mm)
Applications: Applications:
7.5mm - 12.0mm 12.0mm- 16.0mm
board thickness board thickness
Jointing Compound PLUS+
Applications: Applications:
4.5mm- 6.0mm board thickness 7.5mm - 12.0mm board thickness
a
100% Asbestos free
A CIDB certified -
IBS status company
Singa
on
po
ati
re
Gr CERTIFIED
ific
ee rt
nB Ce
uilding Council
MyHP00175/16
V4 1808
General Building ROCKWOOL® productSHEET
800 356-01/17_V1 (en)
Cool‘n’Comfort ™
ROCKWOOL stone wool products are non-combustible with a ROCKWOOL stone wool is inorganic and contains no
melting point more than 1000°C. They are particularly nutritious substance. Therefore it will not be attacked by
suitable for thermal insulation, fire protection and sound microorganisms. Stone wool will not rot and does not attract
reduction or absorption. vermin.
Cool’n’Comfort Series is specially formulated with a silicone Cool’n’Comfort Series is available as plain products and
water repellent coated onto each strand of the stone wool additionally with options of foil facing or glass tissue on one-
fibres. *This special coating allows Cool’n’Comfort to repel side or two-sided.
rain water that comes into contact with the product, at the
same time ensuring the product’s excellent thermal and
acoustic performance even after exposure to water.
Cool‘n’Comfort RL
Series without facing
Standards
*Note: Water repellent test standard is based on GBT 10299. For more
information, please contact your local representatives.
General Building ROCKWOOL® productSHEET
800 356-01/17_V1 (en)
Technical Parameters
Product Name Cool'n'Comfort Cool'n'Comfort Cool'n'Comfort Cool'n'Comfort Cool'n'Comfort Cool'n'Comfort Standards
RL920 RL940 SL920 SL940 SL950 SL960
Thermal Conductivity 0.036 0.034 0.036 0.034 0.034 0.033 ASTM C518
20°C λ Value (W/mk)
Water Vapor Less than Less than Less than Less than Less than Less than ASTM C1104
Absorption 0.04 Vol % 0.04 Vol % 0.04 Vol % 0.04 Vol % 0.04 Vol % 0.04 Vol % C1104M
Recommended Single skin metal Single skin metal Double skin Double skin metal Double skin metal Double skin
for these common roof for food centre roof for high metal roof for roof for industrial, roof for exhibition metal roof for
applications or canteen, usually end residential, residential & warehouse & hall, school & concert hall &
non air-condition, to provide a commercial factory where educational airport where
without walls and better thermal buildings for higher insulation institute for high acouctic
highly ventilated performance and general thermal thickness is versatile roof performance
environment. Also long term savings performance designed to design and high on low sound
commonly used on energy bill be slightly durability frequencies are
in walkways and compressed for required
common pavilion acoustic damping
in residential of the metal roof
estates
Cool'n'Comfort RL920 0.20 0.60 1.00 1.00 1.00 1.00 1.00 0.90
Cool'n'Comfort RL940 0.20 0.70 1.00 1.00 1.00 1.00 1.05 1.00
Cool'n'Comfort SL920 0.20 0.60 1.00 1.00 1.00 1.00 1.00 0.90
Cool'n'Comfort SL940 0.20 0.70 1.00 1.00 1.00 1.00 1.05 1.00
Cool'n'Comfort SL950 0.20 0.75 1.00 1.00 1.00 1.00 1.05 1.00
Cool'n'Comfort SL960 0.30 0.85 1.00 1.00 1.00 1.00 1.05 1.00
www.rockwoolasia.com
Rockwool Malaysia Rockwool Malaysia Rockwool (Thailand) Limited Disclaimer: The information contained in this
Sdn Bhd Sdn Bhd Hemaraj Eastern Industrial data sheet is believed to be correct at the date
Lot 4, Solok Waja 1 175 A&B Estate (Map Ta Phut) of publication. ROCKWOOL does not accept
Bukit Raja Industrial Estate Kawasan Perindustrian 1 Soi G 2, Pakornsongkrohraj responsibility for the consequences of using
41050 Klang, Selangor Air Keroh, Jalan Lingkungan Road, Huaypong, Muang Cool‘n’Comfort™ Blanket & Slab in applications
Malaysia Usaha, 75450 Melaka Rayong 21150 different from those described above.
T (+60) 3 3341 3444 Malaysia Thailand
F (+60) 3 3342 7290 T (+60) 6 233 2010 T (+66) 3868 5110
F (+60) 6 233 2012 F (+66) 3868 4938
AIRCOND
LIGHTING
Self-Contained Emergency KELUAR Sign
PEX-215LED (Super Bright LEDs)
Specifications
Model ........................... PEX-215 LED.
Light Source ................... 18 nos super bright LED (SMD).
LED Wattage .................. ~0.80W.
Mode ........................... Maintained.
Weight ........................... ~1.2 Kg.
Battery ........................... 2 x 1.2V 1.7AH Ni-Cd.
Housing .......................... Electro-galvanised sheet steel with powder coated paint.
Charger .......................... Constant current.
Mounting ........................ Surface mounting direct to wall or ceiling.
Dimension ....................... 556mm (L) x 52mm (W) x 155mm (H).
Monitoring ...................... Red LED indicating healthy supply and charging.
Compliance ...................... MS 983 : 2004, MS 619-2-22:2005.
MS IEC 60598-1 : 2012.
Note : Due to continuous development and improvement, our company reserves the right to change specifications without notice.
PEX 215 LED
PNE EMERGENCY ‘KELUAR’ SIGN
TM
DETAIL A
INCOMING WIRE
STEP 1
WALL
MAIN CASING
STEP 1
DETAIL 'A'
NEUTRAL
N
EARTH
PANEL
LIVE
SIDE COVER (R)
L