Zamil? *2 2) Ste ellis 3
rexmsion ZAMIL OFFSHORE SERVICES COMPANY
OFFSHORE HOOK UP, UPGRADE MODIFICATION, SCADA INSTALLATION
AND COMISSIONING SUPPORT
(CONTRACT : 6600044802)
TOOL BOX TALK
Location: QMS OMAR Date: 04-OCT-2021
Start Time:06:30 PM TBT Log No :TBQM-OMAR-COAT-070
Meeting Duration:30 Minutes Number of Attendees: 4
Topics Discussed:
° CALIBRATION OF MONITORING AND MEASURING DEVICES
* As Per Schedule Q Att IV Sec 7.1
PARTICIPANTS.
Si. | Zanit Emp. | Arameo iD 7 [Name of Attendee | Position Signature
no. | # TQAMA
a} 62946 8851131 ALFONSO MOLDIN- Mech. FOREMAN
2 | suscon | e479053 | arstapieranim | appuicaror
3 | 6aa09 8256955 | Rasa moKsao | apPuicaTon/euasreR
a
s
6
7
a |
| - a
QC Inspector QC Supervisor
(me: SARMAD AZEEM Name FRANCIS BINUYA
Discipline : COATING | y Discipline CATING
‘Signature: Signature: ~~ a s.
(Jof-oq7ey
SES ETIRET TTS TRreerrre ee
‘TBT Log No: TBQM-OMAR-COAT-070 Page 1¢ CALIBRATION OF MONITORING AND MEASURING DEVICES
1. CONTRACTOR shall include procedures for the control of
inspection, measuring and testing equipment. Specific tools and
Equipment shall be identified to make and perform tests in the
field with instructions for their use, calibration, and storage. The
CONTRACTOR shall identify, maintain, control, adjust, and
calibrate all tools, gauges, instruments and other measuring and
testing devices used for controlling quality. Calibration shall be
performed at established periods as specified in the most
stringent of COMPANY standards, other applicable standards, or
manufacturer recommendations; if no standards apply, the
calibration cycle shall not exceed six months. CONTRACTOR shall
provide backup equipment when the primary equipment is being
calibrated or tested.
Log No: TBQM-OMAR-COAT-070 Page 2