Zamil” Agee Glare del is 3
(tahoe Cone ZAMIL OFFSHORE SERVICES COMPANY
OFFSHORE HOOK UP, UPGRADE MODIFICATION, SCADA INSTALLATION
AND COMISSIONING SUPPORT
(CONTRACT : 6600044802)
TOOL BOX TALK
Location: QMS OMAR Date: 16%-NOV-2021
Start Time:06:30 PM ‘TBY Log No :TBQM-OMAR-COAT-089
Meeting Duration:30 Minutes Number of Attendees: +
‘Topics Discussed:
+ POST BLASTING CLEANING REQUIREMENT GRATING AS PER
SAES-H-004, PARA 6.6.
PARTICIPANTS,
‘Aramco D7] NameafAvendee | Poaion Signatre
TQAMA
Top eee | aeeee Sa ie Fon by
2 3209 | _24soass | nasa moxsao ‘APPLICATOR Liof
3 | s3ee26s | 24sco0ase [amiaumnanman | sussren SLM
‘
5 | | |
e|
iz
| .
QC Inspector : Qc Supervisor
Name: UMER SAEED KHAN Name FRANCIS BINUYA
S
Tver
Discipline: COATING.“ Discipine: GOATING—
Signature: o2 Signatur 7
ee
TBT Log No: TBQM- OMAR-COAT-089 Page 1POST BLASTING CLEANING REQUIREMENT GRATING AS PER
SAES-H-004, PARA 6.
. Spent abrasive shall be removed from cleaned external surfaces
by dry brushing and blowing down with clean, dry compressed
air. Internal surfaces shall be dry brushed and vacuum cleaned.
oa
Abrasive-cleaned surfaces shall be primed or coated before the
surface condition degrades below the specified cleanliness level.
Abrasive blasted surfaces shall call for inspection prior to
priming or coating if the surfaces are hold for more than 4 hours
after blasting.
B
The reference standard for profile measurement shall be the
Replica Tape Method according to ISO 8503-5. This does not
preclude the use of other techniques provided that these give
similar measurable profile values in microns. Surface
comparators are not acceptable.
‘TBT Log No: TBQM- OMAR-COAT-089 Page 2