Professional Documents
Culture Documents
ME2005 - Trang Bi Dien - Dien Tu Trong MCN - 2022
ME2005 - Trang Bi Dien - Dien Tu Trong MCN - 2022
DCMH.ME2005.7.1
Môn học nhằm trang bị cho sinh viên Cơ khí các kiến thức, khái niệm, nguyên lý cơ bản để phân tích, lựa chọn và sử dụng các loại
thiết bị và khí cụ điện, điện tử có trong các máy móc công nghiệp.
1/5
12/20/21, 9:58 AM
Content (in English) :
The course aims to acquaint students with basic knowledge in electrical, electronic engineering for industrial machinery
Cấu tạo, nguyên lý hoạt động, thông số kỹ thuật của khí cụ điện - điện tử - điện tử số, các loại động cơ điện. Phân tích các mạch điều
khiển và động lực trong các máy công nghiệp từ các mạch cơ bản.
The course presents concepts, circuits, operating principles, and specifications of electrical instrument, electronics, digital
electronics, electric motors commonly used in industrial machines.
It covers the following topics:
- Fundamentals of electricity, electric circuits, electric transmission
- Semiconductors and analog electronics
- Digital electronics
- Electric machines
- Electric driving system
Tài liệu học tập có thể được tải xuống từ trang BKEL (http://e-learning.hcmut.edu.vn/). Các slide bài giảng được cập nhật hàng tuần
theo tiến độ học tập trên lớp. Bên cạnh đó, sinh viên có thể tự học, tìm hiểu sâu hơn thông qua các tài liệu sau:
Materials can be downloaded from BKEL (http://e-learning.hcmut.edu.vn/). Lecture notes are updated weekly corresponding to
lecture progress.
Reference books:
[8] John F. Wakerly, “Digital Design.Principles and Practices”, 4th Edition, Prentice-Hall, 2006.
[9] Katz and Boriello, “Contemporary Logic Design”, 2nd Edition, Prentice-Hall, 2005.
[10] M. Morris Mano and Charles R. Kime, “Logic and Computer Design Fundamentals”, 3rd Edition, Prentice- Hall, 2004
2/5
12/20/21, 9:58 AM
Tài liệu được đưa lên BKEL hàng tuần. Sinh viên tải về, in ra và mang theo khi lên lớp học. Điểm tổng kết môn học được đánh giá
xuyên suốt quá trình học:
Điểm tổng kết môn học được đánh giá xuyên suốt quá trình học, chi tiết như sau:
+ Bài tập: 30%
+ Bài tập lớn: 20%
+ Thí nghiệm: 20%
+ Thi cuối kỳ : 30%
Nếu có một điểm thành phần dưới 2 thì điểm tổng kết môn học sẽ là 2.
Learning materials are provided in BKeL system (http://e-learning.hcmut.edu.vn/). Lecturers may provide lecture notes every week
according to the schedule. There are video lectures and quizzes for students to study at home in a seperated course named _Video.
There is also a forum for discussion or Q&A. Students should view and read materials in advance at home, and submit the exercises
on time.
Total score comprises of these sub-scores:
+ Exercises: 30%
+ Group Assignment: 20%
+ Laboratory: 20%
+ Final examination : 30%
If any sub-scores is less than 2, the total score will be 2.
❖ Hiểu biết, kỹ năng, thái độ cần đạt được sau khi học môn học (Knowledge, skills and
attitudes acquired after the course)
L.O.1 - Nắm vững các thuật ngữ, khái niệm, cấu tạo, nguyên lý, thông số kỹ thuật của các loại máy điện, khí cụ điện - điện tử -
điện tử số cơ bản.
( Understand concepts, definitions, terms, structures, working principles, and technical specifications of electric-
electronic-digital devices, and electric machines. )
L.O.1.1 - Nắm vững các thuật ngữ, khái niệm, đại lượng cơ bản của mạch điện
( Understand concepts, terms and quantities related to electric circuits. )
L.O.1.2 - Nắm vững các thuật ngữ, khái niệm, cấu tạo, nguyên lý, thông số kỹ thuật của các khí cụ điện cơ bản: điện trở,
cuộn cảm, tụ điện, nguồn điện
( Understand concepts, definitions, terms, structures, working principles, and technical specifications of basic
elements in electric circuits: resistor, capacitor, inductor, power source. )
L.O.1.3 - Nắm vững các thuật ngữ, khái niệm, cấu tạo, nguyên lý, thông số kỹ thuật của các khí cụ điện tử cơ bản
(diode, SCR, Triac, BJT, FET, OPAMP), các linh kiện quang bán dẫn (quang trở, diode quang, tế bào quang điện,
transistor quang, LED, Photocouplers)
( Understand concepts, definitions, terms, structures, working principles, and technical specifications of
electronic devices (diode, SCR, Triac, BJT, FET, OPAMP), and optoelectronic )
L.O.1.4 - Nắm vững các thuật ngữ, khái niệm, cấu tạo, nguyên lý, thông số kỹ thuật của các cổng logic, flip-flop,
counter.
( Understand concepts, definitions, terms, structures, working principles, and technical specifications of logic
gates, flip-flops, counters. )
L.O.1.5 - Nắm vững các định nghĩa, khái niệm, định lý trong đại số Boole
( Understand concepts, definitions, terms, theorems in Boolean algebra )
L.O.1.6 - Nắm vững các thuật ngữ, khái niệm về các hiện tượng điện từ cơ bản: điện trường, từ trường, trường điện từ,
hỗ cảm.
( Understand fundamentals of electromagnetic phenomena: electric field, magnetic field, electromagnetic field,
mutual and self-inductance. )
L.O.1.7 - Nắm vững các thuật ngữ, khái niệm, cấu tạo, nguyên lý, thông số kỹ thuật của các loại máy điện cơ bản: máy
biến áp, các loại động cơ điện (DC, BLDC, Stepper, AC KĐB 3 pha, AC 1 pha).
( Understand concepts, definitions, terms, structures, working principles, and technical specifications of basic
electric machines: transformer, DC motors, BLDC motors, Stepper, three-phase and single-phase induction motors. )
L.O.1.8 - Nắm vững các thuật ngữ, khái niệm, cấu tạo, nguyên lý, thông số kỹ thuật của các khí cụ điện: đóng cắt bằng
tay, tự động, khí cụ bảo vệ (cầu chì, rơle nhiệt, CB)
( Understand concepts, definitions, terms, structures, working principles, and technical specifications of manual
and automatic switching devices, and protection devices )
L.O.1.9 - Trình bày một cách có hệ thống các khái niệm đã được học
( Organize and represent concepts and relationships between concepts )
3/5
12/20/21, 9:58 AM
L.O.2 - Giải thích nguyên lý vận hành, phân tích các đại lượng cơ bản của sơ đồ mạch điện.
( Explain working principles and analyze basic quantities of electric circuits )
L.O.2.1 - Giải thích nguyên lý vận hành, phân tích các đại lượng cơ bản của mạch điện DC
( Explain working principles and analyze basic quantities of DC electric circuits )
L.O.2.2 - Giải thích nguyên lý vận hành, phân tích các đại lượng cơ bản của mạch điện AC
( Explain working principles and analyze basic quantities of AC electric circuits )
L.O.2.3 - Giải thích các nguyên tắc an toàn điện
( Explain electrical safety principles )
L.O.2.4 - Phân tích các chế độ hoạt động của BJT, FET, OPAMP.
( Recognize operation modes of BJT, FET, OPAMP )
L.O.2.5 - Phân tích các mạch số - hệ tổ hợp
( Analyze combinational logic system )
L.O.2.6 - Chuyển đổi giữa các cách biểu diễn hàm Boole, và thực hiện rút gọn hàm Boole
( Understand and demonstrate Boolean expressions in various forms, as well as minimize the expressions. )
L.O.2.7 - Giải thích nguyên lý vận hành, phân tích các đại lượng cơ bản của sơ đồ mạch điều khiển động cơ AC KĐB 3
pha
( Explain operating principles of three-phase induction motor control circuits )
L.O.2.8 - Giải thích được các trạng thái và các đặc tính cơ, điện của động cơ AC KĐB 3 pha khi không tải, khởi động,
thay đổi tốc độ, đảo chiều, hãm.
( Explain the states and electro-mechanical characteristics of three-phase induction motor at rest, starting, speed
adjusting, reverse, braking process. )
L.O.3 - Vẽ, đọc hiểu và giải thích được nguyên lý vận hành của sơ đồ mạch trong máy công nghiệp
( Draw and explain working principles of electric circuits in industrial machines (both driving and control circuits) )
L.O.3.1 - Vẽ sơ đồ mạch điện đúng chuẩn
( Draw the circuit diagrams following standards )
L.O.3.2 - Biểu diễn được sơ đồ khối của một sơ đồ điện đơn giản của máy công nghiệp
( Represent block diagram of fundamental electric schematic diagram of industrial machines )
L.O.3.3 - Nhận biết vai trò chức năng của từng thành phần và mối liên hệ giữa các thành phần trong một hệ thống sơ đồ
điện điển hình
( Recognize the role of each part and the relationships between them in a circuit diagram. )
L.O.4 - Lắp đặt, chẩn đoán, thay thế các thành phần cơ bản của mạch điện trong máy công nghiệp
( Assemble, diagnose, and replace typical electric devices in industrial machines )
L.O.4.1 - Biết cách kết nối, lắp đặt các khí cụ điện trong mạch điện máy công nghiệp
( Connect, assemble electric devices in a circuit of industrial machines )
L.O.4.2 - Chẩn đoán lỗi sai, các điểm mất an toàn trong sơ đồ mạch điện
( Diagnose the wrong or unsafe points in electric circuit diagram )
L.O.4.3 - Có thể chọn khí cụ điện thay thế khi hư hỏng
( Choose the replacement parts )
L.O.4.4 - Phân tích và lựa chọn được loại động cơ điện cùng mạch điều khiển, mạch công suất phù hợp
( Analyze and choose an appropriate motor type, as well as driving circuit and control circuit )
L.O.1 - Nắm vững các thuật ngữ, khái niệm, nguyên lý, thông số kỹ thuật của các loại động cơ điện, khí cụ điện - điện tử - điện
tử số cơ bản.
( Demonstrate terminologies, concepts and specifications of electric motors, electrical components and basic digital
devices. )
L.O.2 - Giải thích được nguyên lý vận hành của sơ đồ mạch cơ bản.
( Explain the working principal for basic circuits. )
L.O.3 - Giải thích được nguyên lý vận hành của sơ đồ mạch trong máy công nghiệp
( Explain the operating principal for industrial circuits. )
L.O.4 - Lắp đặt, chẩn đoán, thay thế các thành phần cơ bản của mạch điện trong máy công nghiệp
( Implement, diagnose and replace basic elements in industrial circuits. )
L.O.5 - Nhận thức được mức độ hữu dụng của môn học mang lại trong công tác kỹ sư.
( Realize the effectiveness of the course in engineering practice. )
❖ Dự kiến danh sách cán bộ tham gia giảng dạy (Tentative list of lecturers)
Bộ môn / Khoa phụ trách (Department) Cơ Điện Tử - Khoa Cơ khí (Department of Mechatronic Engineering -
Faculty of Mechanical Engineering)
Văn phòng (Office) Bộ môn Cơ điện tử, P.210B11
Department of Mechatronic Engineering (Room 210B11)
Điện thoại (Phone number) 02838647256 - 5870
Giảng viên phụ trách (Lecturer) Trần Việt Hồng
E-mail (Email) tvhong@hcmut.edu.vn
5/5