Professional Documents
Culture Documents
I. Objectives:
At the end of the 30 minutes discussion the Grade 10 students are expected to:
a. Discuss the procedure of PCB designing clearly;
b. perform the step by step procedure of PCB designing; and
c. value the importance of PCB designing.
II. Subject Matter
III. Procedure
A. PRELIMINARY ACTIVITY
"Let us start this day by thanking God (Mr. Bejuco will stand in front and wllead
and ask for his Guidance, Mr. Bejuco the prayer.)
Please
lead the prayer
B. Motivation
When you hear the word designing what (Students wl raise their hands)
comes in your mind?” Making a thing based on what you want
to do.
Thank you, how do you leel when you (Students wili raise their hands)
are given a chance to design a thing? *Happy, because I can have a chance to
express what I feer
C. Presentation of Lesson
D. Lesson Proper
(Pick 2 students from each group) - PCB is a electronic tool used in every
electronic devices”
Thank You, Please be noted that those
students who are participating will get
extra points for recitation.
Safety Precaution
1. Remove al jewelry when
perlorming the activity.
2. Eating and Drinking is prohibited.
3. Avoid Horseplaying
4. Be familar with the tools and
chemical to be used.
5. Do not perform the activity unless
the instructor told you to do so.
6. f accident happens, report
immediately to the instructor.
Thank You. How about the steps in PCB (Students wil raise their hands)
Designing, anyone? "I have learned that there are 7 steps in
PCB designing
1. Prepare the materials Needed.
2. Cover the PCB with Masking Tape
3. Draw up the Layout
4. Carefully trace the design using
cutter and emove the excess
Masking Tape.
5. Subject to Etching Process.
For the etching process, Put enough
amount of feric chloride to the
container to submerge the PCB.
6. Rinse the PCB with water.
7. Remove the masking tape with the
design.
IV. Evaluation
Direction: Read the following questions and write the answer to the space provided.
ldentification
____1. Itis the backbone of electronic devices.
____2 It provides the electrical needs of the electronic components.
Assignment
____3. t holds and provide insulation to the electronic components.
Enumeration
4-10 7 steps in PC8 Designing
A Folow up assignment
1. Research about diferent PBC design.
2. Per group, Submit each PC8 with holes already drilled.
V. Assignment/Agreement
Advance Assignment
1. Read about Soldering a Component.
Prepared by:
NORHAIMA IMAMIL
Teacher