Professional Documents
Culture Documents
Adb GRM GC Ec Mos 001
Adb GRM GC Ec Mos 001
Adb GRM GC Ec Mos 001
REVISION DESCRIPTIONS
Page 1 of 4
METHOD OF STATEMENT
F192 – KNAUF Integral GIFAFloor LBS plus
Contents
Page 2 of 4
METHOD OF STATEMENT
F192 – KNAUF Integral GIFAFloor LBS plus
1 INTRODUCTION
This method statement is specifically developed for the installation of the Knauf F192 Knauf Integral GIFAfloor LBSplus
double-layer system, designated for the ADB GRM Relocation Project at the CH64 Building Office in Tbilisi. The method
expression corresponds to the reference descriptions, features and standards.
2 PURPOSE
The purpose of this method statement is to explain how to install the Knauf F192 Knauf Integral GIFAfloor LBSplus double-
layer system at the ADB GRM Relocation Project within the CH64 Building Office in Tbilisi. This document ensures that all
installation activities follow the specified requirements and safety rules, making sure the work progresses smoothly and
securely.
3 SCOPE
This method statement describes the detailed steps for installing the Knauf F192 Knauf Integral GIFAfloor LBSplus double-
layer system, including laying, reinforcing, and anchoring. It's essential to follow these steps closely along with the contract
specifications for the ADB GRM Relocation Project at the CH64 Building Office in Tbilisi to ensure the installation aligns
perfectly with the project's needs.
4 REFERENCES
EN 13213 - Hollow floors.
EN 13501-1 - Fire Test for Building Materials.
EN20535 - Paper and board - Determination of water absorptiveness - Cobb method (ISO 535:1991).
DIN 4102 - Fire behavior of building materials and elements.
EN 13419-1 – Emission test chamber method.
EN 13419-3 - Procedure for sampling, storage of samples and preparation of test specimens.
ISO 16000-3 - Determination of formaldehyde and other carbonyl compounds in indoor and test chamber air.
ISO 16000-6 - Determination of organic compounds (VVOC, VOC, SVOC) in indoor and test chamber air by active sampling
on sorbent tubes, thermal desorption and gas chromatography using MS or MS FID.
ISO 16000-9 - Determination of the emission of volatile organic compounds from samples of building products and
furnishing.
ISO 1600-11 - Determination of the emission of volatile organic compounds from building products and furnishing.
ISO 16017-1 - Indoor, ambient and workplace air.
Page 3 of 4
METHOD OF STATEMENT
F192 – KNAUF Integral GIFAFloor LBS plus
This comprehensive list covers the necessary machinery, equipment, and manpower required for the successful installation of
the Knauf F192 Knauf Integral GIFAfloor LBSplus double-layer system. Adjustments can be made based on specific project
requirements and site conditions.
7 METHOD OF EXECUTION
Page 4 of 4