Professional Documents
Culture Documents
LP 1-Handtoolsand Equipment
LP 1-Handtoolsand Equipment
I. OBJECTIVES
At the end of the lesson the student is expected to:
a. identify the different classification and uses of tools & equipment used in
handicraft.
b. familiarize with the tools and equipment used in handicraft.
c. appreciate the importance of knowing about tools and equipment used in
handicraft.
1. Greetings
Good afternoon class! Good afternoon, ma’am!
2. Prayer
3. Checking of attendance
B. MOTIVATION
Please be seated.
Thank you, ma’am!
C. LESSON PROPER
Based on our game, can you guess our It is about hand tools and
lesson for today? equipment’s ma’am
Very good!
What are the different lining tools? PENCIL – used to mark what is
measured or to be measured.
What are the different testing tools? PLUMB BOB - a weight attached to
a string and uses gravity to test
whether it is exactly vertical, true
vertical line.
What else? SPIRIT LEVEL (PLUMB & LEVEL) a
special tool to fit constructed
materials or anything that you need
to be level.
Very good! TRI-SQUARE used for checking the
accuracy of right angles.
SLIDING T-BEVEL helps to set and
copy angles.
What are the different holding tools? C-CLAMP - used to press pieces of
materials, such as wood or bamboo
VISE - used to hold a piece of
material securely in place.
Excellent!
BORING TOOLS
How about boring tools?
tool used in metalworking and
woodworking that bring holes.
Very good!
HAND DRILL - used to bore holes
What are the different boring tools any through materials and to prevent
one? cracking
D. ENRICHMENT ACTIVITY
1. Tape measure
2. Meter stick
3. Pull-push rule LINING TOOLS
4. Calipers
5. Pencil
6. Tailor’s chalk
7. Marking gauges
8. Marking knife TESTING TOOLS
9. Plumb bob
10. Spirit level (PLUMB & LEVEL)
11. Tri- square
12. Sliding T -Bevel HOLDING TOOLS
13. C-clam
14. Vise
15. Tweezers
16. Claw hammer DRIVING TOOLS
17. Small hammer
18. Mallet
19. Screw driver
20. Hand drill BORING TOOLS
21. Auger bit in a racket brace
22. Expansive bit
23. Scratch awl
24. Scissors CUTTING TOOLS
25. Tin snips (TIN SHEARS)
26. Jack plane
27. Rasp pile
28. Bolo FASTENING TOOLS
29. Spokeshave
30. Soldering iron
E. GENERALIZATION
Again, what are the classification of Ma’am measuring tools, lining tools,
hand tools used in handicraft. boring tools, fastening tools,
finishing tools and cutting tools.
Very good!
Any idea?
To be able to distinguish them from
one another and their uses ma’am.
IV. EVALUATION
Direction: Identify the correct answer. Write the letter only in ¼ sheet paper.
1. These are tools to measure length and width using English or metric
system of measurement.
a. Lining tools
b. Measurement tools
c. Boring tools
d. Testing tools
2. These are tools used to examine accuracy in measurement, angle or if
materials need to be levelled.
a. Driving tools
b. Fastening tools
c. Cutting tools
d. Finishing tools
3. These tools are used for making lines to aid in cutting materials or to
indicate boundaries.
a. Measurement tools
b. Lining tools
c. Cutting tools
d. Fastening tools
4. A weight attached to a string and uses gravity to test whether it is exactly
vertical, true vertical line.
a. Tape measure
b. Plumb-bob
c. Tri-square
d. Marking gauges
5. Any type of tool to facilitate joining or fastening materials together.
a. Lining tools
b. Boring tools
c. Fastening tools
d. Cutting tools
V. ASSIGNMENT
What are the proper care and routine maintenance of hand tools and
equipment.