Professional Documents
Culture Documents
I. OBJECTIVES
At the end of the lesson the students will be able to:
A. Identify the different basic hand tools, materials, and equipment used in Shielded Metal Arc Welding.
B. Appreciate the importance of basic hand tools, materials, and equipment.
C. Familiarize the different basic hand tools, and their function.
Sir!
Yes Jobert
HACKSAW Sir
Excellent!
Sir!
Yes Gilbert
WRENCH Sir
Okay Very Good
Sir!
Yes Robert
VISE-GRIP Sir
Awesome!
Sir!
Yes! Henry
PLIERS Sir
Great!
B. ANALYSIS
Today class we were going to identify the different basic
hand tools, materials, and equipment used in Shielded
Metal Arc Welding and appreciate the importance of basic
hand tools, materials, and equipment. Lastly familiarize the
different basic hand tools, and their function.
What is Hand Tools?
Sir
Okay, Kate!
-Hand tools are simple tools which you use with your
hands, and which are usually not powered. Hand tools
is any tool that is powered by hand rather than a motor.
Excellent!
1st Handtools
Thank you.
Thank you.
Wrench
It is used for loosening and tightening light and
C. ABSTRACTION heavy nuts, and bolts.
Yes! Romar
None Sir!
Amazing!
Excellent
Sir!
The students will be group into 6 and each group will arrange the puzzle. And after arranging it, they will put the
name of Hand tools.
Cooperation and Member do not know Members have defined Members are on task and
Teamwork their task. responsibilities must have defined responsibilities
of the time. at all times.
Time Management Members do not Member finish on Members finish ahead of time
finish on time with time which incomplete with complete data.
incomplete data. data
Neatness and Messy workplace Clean and orderly Clean and orderly workplace
Orderliness during and after workplace with at all times during and after
activity. occasional mess the activity.
during and after the
activity.
IV. EVALUATION
Short Quiz
Direction: Identify and give what is asked in each item.
I. MULTIPLE CHOICE
1. This tool is used to tighten and loosen screws by pushing or pulling screws in a rotating manner.
A. Hammer C. Wrench
B. Hacksaw D. None of the above
2. What tool used for loosening and tightening light and heavy nuts and bolts.
A. Hacksaw C. Wrench
B. Screwdriver D. None of the above
3. A tooth cutting tool usually with a solid and adjustable frame.
A. Hammer C. Wrench
B. Screwdriver D. None of the above
4. A _________ is a tradesperson who specializes in fusing materials and fabricates or puts together
metal parts.
A. Carpenter C. Engineer
B. Welder D. Auto-mechanic
5. Our topic is all about?
A. Safety Procedure C. Adjusting Tools
B. Hand Tools D. None of the Above
II. MATCHING TYPE
Set A Set B
1. A. CHISEL
2. B. HACKSAW
3. C. BALLPEEN HAMMER
4. D. WRENCH
5. E. PULL-PUSH RULE
V. LABORATORY
Shop related activities.
VI. ASSIGMENT
Make an advance reading in TLE (SMAW) Module 5 and answer Self Check on Page 4-5.
Noted by:
DANILO M. VILORIA
Vocational Subject Teacher
Head Teacher
Approved by:
LOLITA CABALZA-UNIDA, PHD.
School Principal IV