Name of Project: MT Confident-1 Report No. :-MT-001 Client / Contractor : Confident Trade International Ltd. Inspection Date : 16-02-2023 Location : MSDL Dockyard ( Workshop), Meghnaghat Test Procedure : MT-001/2022 Surface Condition : Clean Material : Carbon Steel Machine Type : Yoke Type Acceptable Crietria : AWS-D1.1 Machine Made : Magnaflux India Classification of Test : Visual Wet Surface Condition : Clean Chemical Type : Wet & Spray 10lb Lift Check Result : Accepted Chemical Colour : White Contrast & Black Ink
Sl. Tested Type of Indication
Test Area Identification Item Evaluation Comments No. Length Indication Size 1 Tail Shaft Port Shaft Dia-5" NAD ACCEPT (Gear Side)
2 Tail Shaft Port Shaft Dia-5" NAD ACCEPT
( Propeller Side)
3 Tail Shaft STBD Shaft Dia-5" NAD ACCEPT
(Gear Side)
4 Tail Shaft STBD Shaft Dia-5" NAD ACCEPT
(Propeller Side)
Note : NAD : No Apparent Defect.
1) This report shall not be reproduced except in full without the written approval of ideal NDT Service & Training centre.
INSPECTOR : LEVEL II ( ASNT )
Md. Atiar Rahman Witness By : Approved By: Signature : Signature : Signature : Dated : 18-02-20223 Date : 18-02-2023 Date : 18-02-2023
Address : House # 12, Road # 28, Block # D , Section : 10, Mirpur, Pallabi, Dhaka-1216 Mobile No.: +88 01711 333528, +88 01977 333528, E mail : idealndt@yahoo.com, atiar.mts@gmail.com