Professional Documents
Culture Documents
PROCEDURE
HINT:
This is the adjustment procedure for when the steering is off center.
*a Masking Tape
*a Marked Line
https://toyotamanuals.com.au/docs/hilux-service-repair-manual-jul-15-current/N00148/manual/repair/contents/RM100000000MJTD.html Page 1 of 3
11/3/17, 10(22 pm
*a Marked Line
*1 Rack End
*a Matchmark
HINT:
https://toyotamanuals.com.au/docs/hilux-service-repair-manual-jul-15-current/N00148/manual/repair/contents/RM100000000MJTD.html Page 2 of 3
11/3/17, 10(22 pm
Torque:
Specified tightening torque : 60.6 N*m
(618 kgf*cm, 45 ft.*lbf)
NOTICE:
Make sure that the boots are not twisted.
HINT:
· Calculate the torque wrench reading
when changing the fulcrum length of
the torque wrench.
Click
hereGeneral>INTRODUCTION>REPAIR
INSTRUCTION>PRECAUTION
· When using SST (fulcrum length of
135.5 mm (5.3346 in.)) + torque
wrench (fulcrum length of 380 mm
(14.9606 in.)): 44.7 N*m (456
kgf*cm, 33 ft.*lbf)
https://toyotamanuals.com.au/docs/hilux-service-repair-manual-jul-15-current/N00148/manual/repair/contents/RM100000000MJTD.html Page 3 of 3