Professional Documents
Culture Documents
Eco .Dia - Irr. Bari Kandorih
Eco .Dia - Irr. Bari Kandorih
*1 Peak Daily Water Requirement for 24 hrs. 17.29 LPS 1 Peak Daily Water Requirement 17.29 LPS 13 Losses in Column pipe:-
*2 Maximum Daily Pumping Hours 16.00 HRS. 2 Maximum Daily Pumping Hours 16.00 HRS. a)Losses in Column Pipe 2.78 MTS.
*3 Length of Rising Main 320 MTS. 3 Peak Daily Design Water Requirement 25.935 LPS b)Losses in Reflux Valve,Sluice Valve,
*4 Highest Point of Discharge 103.00 MTS. 4 Length of Rising Main 320 MTS. Bend & Exit (2.3+0.2+2.2+1.0)v^2/2G 0.20 MTS.
*5 Reduced Level of Pump House 100.00 MTS. 5 Economical Dia. Of Rising Main 200.00 MM 14 Frictional Losses in Rising Main Including
6 Centre Line Level of Pump/P.W.L. 54.42 MTS. 6 Frictional Losses Per 1000 mts. 6.19 MTS. 10% for Bends & Specials 2.18 MTS.
*7 Value of "C" 100.00 7 Delivery Head 48.58 MTS. 15 Total Head 56.74 MTS.
*8 Rate of Electric Charges Per Unit in Rs. 3.10 Rs. *8 Residual Head 3.00 MTS. 16 B.H.P. OF PUMP I/C 15% OVERLOADING 37.60 H.P.
*9 Rate of Pumping Machinery in Per H.P. in Rs. 4500.00 Rs. *9 Dia of Column Pipe 125.00 MM 17 Say B.H.P. 40.00 H.P.
*10 Exact Hours Of Pumping In a Year 2802.30 HRS. *10 Length of Column Pipe 45.58 MTS. *18 Hence Provide 1 Set of 40H.P. Each
11 Peak Daily Design Water Requirement 25.94 LPS 11 Frictional Losses Per 1000 mts. In Column pipe 61.02 MTS.
DIA OF LENGTH STATIC DISCHARGE LOSSES TOTAL NORMAL MAXIMUM VELOCITY WATER FIELD TEST PRESSURE
PIPE OF PIPE HEAD PER 1000 LOSSES VELOCITY OPERATING OF HAMMER SHALL BE GREATEST
I/C 10% PRESSURE PRESSURE EFFECT 1.5xCOL.3 1.5xCOL.8
FOR BENDS WAVE
(MM) (MTS.) (MTS.) (LPS) (MTS.) (MTS.) (M/SEC.) (MTS.) (M/SEC.) (MTS.) (MTS.) (MTS.)
1 2 3 4 5 6 7 8 9 10 11 12
AT RD = 0 RL = 1100
200 320 48.58 25.94 61.02 2.18 0.83 50.76 1225.52 103.10 72.87 76.14
AT RD = 90 RL = 1152
200 230 -3.42 25.94 61.02 15.44 0.83 12.02 1199.76 100.93 -5.13 18.03
AT RD = 240 RL = 1221.8
200 80 -73.22 25.94 61.02 5.37 0.83 -67.85 1166.29 98.12 -109.83 -101.78
TENSILE DIA OF OUTSIDE STRESS TEST WALL CORROSION WALL SUMMERY :- PROVIDE
STRENGTH PIPE DIA OF PIPE PRESSURE THICKNESS OR EROSION THICKNESS
* ALLOWANCES I/C 10% MILL RD
"D" "Do" "S" "P" "t" "C" TOLERANCE FROM TO
(Mpa) (MM) (MM) (Mpa) (Mpa) (MM) (MM) tm = t+c(MM)
17 18 19 20 21 22 23 24
210 200 273.10 124.00 0.30 0.39 1.65 2.08 240 320
Hmax.=C Vo/g
Where
Hmax.=maximum pressure rise in the closed conduit above the normal pressure in mts.
C =velocity of pressure wave travel in m.sec.
Vo =normal velocity in the pipeline before sudden closure in m/sec.
g =acceleration due to gravity in sq.m/sec.
C =1425/sqrt.(1+(kd/Ect))
Where
k =bulk modulous of water (2.07*10^8 kg/sq.m)
d =diameter of pipe in mts.
Ct =wall thickness in mts.
E =modulous of elasticity of material in kg/sq.m (for steel pipes E=2.1*10^10)
P =2st/Do
Where
P =test pressure in Mpa
S =stress in Mpa which shall be taken as 40% of the
specified minimum tesile strength
t =specified thickness in mm
Do =outside diameter in mm
or t =PDo/2s
FIELD TEST PRESSURE WHICH MAX.FTP GRADE APP. WALL
SHALL BE GREATEST OF OF COLUMN OF THICKNESS
MAX. PRESSURE 11,12,13 STEEL AS PER
+ CODE TAB.
WATER HAMMER *
(MTS.) (MTS.) (MM)
13 14 15 16
UMMERY :- PROVIDE
AT RD = 0 RL = 1100
200 320 48.58 25.94 61.02 2.18 0.83 50.76 1225.52
AT RD = 90 RL = 1152
200 230 -3.42 25.94 61.02 15.44 0.83 12.02 1199.76
AT RD = 240 RL = 1221.8
200 80 -73.22 25.94 61.02 5.37 0.83 -67.85 1166.29
SUMMERY :- PROVIDE
0 90 6.40 Fe 330 28
RISING MAIN
Water requirement =
Carring capacity of R/ main in the year =
Economical dia of rising main. =
Total length of the rising main. =
Working Head Heavy class =
Medium class =
Rate of frictinal losses/1000 8.41
Top Rd. of rising main = 300 And RL= 1332.50
i) At RD = 0 And RL = 1200.00
Frictional lossesin the Rising main = 2.52
Add 10 % for other losses. = 0.25
Static Head. = 132.50
Residual Head. = 3.00
> 148
148
TO 0
120
Rd.
metres
es from
270 metres