Professional Documents
Culture Documents
Isolated Foundation - 11
Isolated Foundation - 11
Isolated Footing 43
1m
0.5 m
Elevation
X 1.5 m
0.5 m
0.7 m
3m
1.5 m
3m
Plan
Input Values
Footing Geometry
Column Dimensions
Pedestal
Include Pedestal : No
Pedestal Shape : N/A
Design Parameters
Soil Properties
Global Settings
Top Reinforcement Option : Calculate only when foundation is subjected to uplift forces
Concrete Design Option : Net Pressure(Gross Pressure - Self Weight Pressure)
Top Reinforcement Factor : 1.00
------------------------------------------------------
Design Calculations
Typesetting math: 100%
Load Combinations
If Au is zero, there is no uplift and no pressure adjustment is necessary. Otherwise, to account for uplift, areas of negative pressure will be set to zero and the pressure
will be redistributed to remaining corners.
Stability Check
Sliding Force
.
Load
Along X- Along Z- Required About X- About Z- Required
Case Resultant
Direction Direction FOS Direction Direction FOS
No.
101 30.76 97.17 29.33 1.50 12355.73 116.36 1.50
102 31.18 25.18 19.59 1.50 44.23 110.40 1.50
103 31.18 25.18 19.59 1.50 44.23 110.40 1.50
104 32.85 56.13 28.35 1.50 232.33 123.03 1.50
105 32.50 46.30 26.60 1.50 72.27 116.04 1.50
106 32.50 46.30 26.60 1.50 72.27 116.04 1.50
107 60.58 237.33 58.70 1.50 164.60 1486.66 1.50
108 50.41 127.09 46.86 1.50 1287.15 358.04 1.50
109 19.95 234.60 19.88 1.50 150.59 59.81 1.50
110 22.45 128.08 22.11 1.50 834.07 68.58 1.50
111 29.65 23.78 18.55 1.50 36.60 119.46 1.50
112 31.01 23.69 18.83 1.50 44.66 120.77 1.50
113 30.05 30.30 21.34 1.50 31.06 113.71 1.50
114 31.28 223.80 30.98 1.50 68.44 117.05 1.50
115 5.19 72.28 5.17 1.50 270.60 9.98 1.50
116 4.07 140.47 4.07 1.50 300.15 8.97 1.50
117 35.90 7.49 7.33 1.50 9.53 194.76 1.50
118 26.54 8.99 8.52 1.50 9.66 82.22 1.50
119 48.48 31.53 26.43 1.50 55.12 275.85 1.50
120 44.22 43.67 31.07 1.50 70.05 204.91 1.50
121 23.90 31.59 19.06 1.50 54.17 72.73 1.50
122 25.94 43.74 22.31 1.50 68.90 80.13 1.50
123 31.76 402.65 31.66 1.50 339.22 117.95 1.50
124 32.67 1391.42 32.66 1.50 1466.10 118.83 1.50
125 32.05 20.07 17.01 1.50 28.90 114.35 1.50
126 32.86 32.47 23.10 1.50 43.16 116.48 1.50
127 8.65 51.69 8.53 1.50 86.94 16.13 1.50
128 5.81 44.30 5.76 1.50 64.12 13.04 1.50
129 36.12 16.83 15.25 1.50 18.20 157.76 1.50
130 29.29 9.92 9.40 1.50 12.26 91.35 1.50
131 228.71 77.04 73.01 1.50 107.57 224.15 1.50
132 96.74 177.99 85.00 1.50 837.20 1126.76 1.50
133 18.02 77.01 17.55 1.50 98.73 50.17 1.50
134 21.36 180.50 21.21 1.50 551.21 60.57 1.50
Load
Along X- Along Z- Required About X- About Z- Required
Case Resultant
Direction Direction FOS Direction Direction FOS
No.
136 34.88 17.77 15.83 1.50 30.31 138.52 1.50
137 33.43 17.65 15.61 1.50 20.43 126.54 1.50
138 35.38 79.59 32.33 1.50 46.31 131.43 1.50
Critical Load Case And The Governing Factor Of Safety For Overturning And Sliding - X Direction
Critical Load Case And The Governing Factor Of Safety For Overturning And Sliding - Z Direction
Typesetting math: 100% 247 219.0203 208.0888 175.7137 186.6452 472.0000 9.00
Actual Area in Contact for all ultimate load cases exceeds the minimum required. Hence Safe
Maximum Corner Pressure from all ultimate load cases is less than the allowable. Hence Safe
Shear Calculation
X 1.5 m
Z
0.205 m
1.5 m
Plan
Total Footing Depth, D = 0.50m
Calculated Effective Depth, d = D - Ccover - 1 * db = 0.41 m
For rectangular column, = Bcol / Dcol = 1.40
0.74 m
Z
1.5 m
0.74 m
Plan
From ACI Cl. 22.5.5.1, Vc = = 1171.16 kN
Check that 0.75 X Vc > Vux where Vux is the shear force for the critical load cases at a distance d from the face of the column caused by bending about the X axis.
X 1.5 m
0.84 m 0.84 m
1.5 m
Plan
From ACI Cl. 22.5.5.1, Vc = = 1171.16 kN
Check that 0.75 X Vc > Vuz where Vuz is the shear force for the critical load cases at a distance d from the face of the column caused by bending about the Z axis.
27 - 13 mm
Calculate the flexural reinforcement along the X direction of the footing. Find the area of steel required.
The strength values of steel and concrete used in the formulae are in Mpa
13 mm @ 105mm o.c.
Because the number of bars is rounded up, make sure new reinforcement ratio < ρmax
Total reinforcement area, As_total = Nbar X (Area of one bar) = 3482.99 mm2
d= D - Ccover - 0.5 X (dia. of = 0.41 m
one bar)
From ACI Cl. 25.2.1, minimum req'd clear distance between bars
Cd = max (Diameter of one bar, 1.0" (25.4mm), Min. User Spacing) = 80.00mm
Provided Steel Area / Required Steel Area = 1.03
23 - 13 mm
Calculate the flexural reinforcement along the Z direction of the footing. Find the area of steel required.
The strength values of steel and concrete used in the formulae are in Mpa
13 mm @ 125mm o.c.
Because the number of bars is rounded up, make sure new reinforcement ratio < ρmax
Total reinforcement area, As_total = Nbar X (Area of one bar) = 2966.99 mm2
d= D - Ccover - 1.5 X (dia. of 0.41 m
=
one bar)
From ACI Cl. 25.2.1, minimum req'd clear distance between bars
Cd = max (Diameter of one bar, 1.0" (25.4mm), Min. User Spacing) = 80.00mm
Provided Steel Area / Required Steel Area = 1.04
Along Z on Bottom
13 mm 23 65.55 65.16
Face
Along X on Bottom
13 mm 27 76.95 76.50
Face
Along Z on Top
N/A N/A N/A N/A
Face
Along X on Top
N/A N/A N/A N/A
Face
3
- Length (m) Width (m) Thickness (m) Volume (m )
Formwork
Footing : 6.00 m2
Pedestal : 0.00 m2
Total : 6.00 m2
Soil Excavation
3m
0.5 m
28-04-2024 12:49:29
Plan
1.5 m
Elevation
BOTTOM 27 - 13 mm
Dimensions (m) Reinforcement
TOP N/A
L B D AstX(T) AstZ(T) AstX(B) AstZ(B)
Foundation
1.5 m