You are on page 1of 1

Technical

10
TI 10-00 06 20 T
information
en

The new EBS control unit does not work with SLD

Applicable to vehicles with EBS 2.2 without


EDC.

Background
The new EBS 2.2 control unit that was
introduced in May 2000 (part no. 1 445 384)
does not function together with the road speed
limiting device (SLD). The road speed limiting
device control lamp is on.

Service solution
The problem occurs when a control unit is
replaced on vehicles already delivered.
Concerned vehicles can be found within the
following chassis numbers:

Scania Södertälje 1 254 424-1 260 817


Scania Zwolle 4 420 708-4 434 367
Scania Angers 9 046 543-9 052 953
Scania Latin Not affected
America E43
1
2
Correct the problem by removing the DIA L 3
4
lead at pin 14 in the connector A on the control 5

unit E43 (EBS). It is important that the lead is 6


7
8
insulated. 9
10
11

On vehicles with higher chassis number than 12


13

the above mentioned, the lead is already DIA L 14


15
DIAL.GN+C56/F-1

disconnected and insulated. 16


17
18
118 629

ã
Scania CV AB 2000-06 1 (1)

You might also like