Professional Documents
Culture Documents
Chart for Ultimate Skin Friction & End Bearing Capacity of RCC Cast-in-situ Pile in tsf
Borehole No-01
0.0 0
1.5 0 0 0.0000 0.00 0.0000 0.0
3.0 8 c 0.5000 0.75 0.3750 4.5
4.5 5 c 0.3125 0.94 0.2930 2.8
6.0 4 c 0.2500 1.00 0.2500 2.3
7.5 12 c 0.7500 0.50 0.3750 6.8
9.0 9 c 0.5625 0.70 0.3938 5.1
10.5 20 s 1.2500 0.50 0.3098 12.0
Note :
Sample type (c) --- Clayey silt/Sailty clay
Sample type (s) --- Silty sand/ Sanndy silt
Sample type (o) --- Organic soil
Sheet 1 of 1
Table -1.2
Borehole No-01
Bridge no. : 01
PILE D EPT H BELO W EXIST IN G G R O U N D LEVEL (m eter)
0 10 20 30 40 50 60
0.0
3.0
4.5
6.0
7.5
9.0
10.5
12.0
NOTES:
1.0 The allowable axial compression loads shown in this figure include a minimum factor of safety (F.S) of 2.5
for both skin friction and end bearing.
2.0 The center to center spacings/distances for the piles should be equal to or greater than 2.5 times the
pile diameter.
3.0 The pile caps should be extended beyond the outside face of exterior piles at least 6 inches, preferably 10
inches
Sheet 1 of 1
anj Dual Rail Line. Location : Piller no-335/8-9, Narayanganj to Dhaka.