Professional Documents
Culture Documents
M. Guruprasath
Sr.Engineer ( Projects ) Chennai.
Mob.: 09372771799
Email: engchn@sunandaglobal.com
Chennai, Tamilnadu
A.CLEANING
Clean the RCC surface of all loose particles, dust, cement laitance etc. preferably done
using floor polishing machine/ Grinding Machine or any other mechanical tools. Surface
preparation is of prime importance as the degree of performance of the coating is
directly proportional to the extent of cleaning.
Identify the cracks. Fill the Small Cracks by using Polyfill AR, for Big Cracks, any
honeycombs repairby using Polyalk EP as polymer cement mortar.
Prepare a Coving (50 mm x 50 mm) at the junction of slab and wall using Sand Cement
and Sunplex Shrinkage Compensating Admixture. Sprinkle cure it for 1-2 days.
Flood testing to be done before treat area for 48 hours after completion of
waterproofing. Leakages if any observed during flood testing may be treated
appropriately and once again checked by flood testing.
B. Grouting:
Providing and injection grouting with pump under pressure at construction joints &
other vulnerable junctions with waterproofing cementitious grout admixed with
shrinkage compensating expanding grout admixtures SUNPLEX.
Mix two pouches of Sunplex (330 grams) per 50 Kg bag of cement. Add sufficient water
for flow ability and grout this slurry under pressures. After grouting cut the nozzles and
seal it with polymer mortar.
Providing and apply single component liquid applied polyurethane based waterproofing
membrane of ELASTOROOF PU to the entire area at the dose of 1.5Kgs / Sqm
Apply single coat of SUNPRIME PU Primer with the help of brush and allow it to dry for
2-3hours
After Primer has dried apply two coats of ELASTOROOF PU a single component moisture
cured, Polyurethane based elastomeric membrane.
Apply First coat of ELASTOROOF PU at 1kg / Sqm and allow it to cure for 24-48hours
Flood testing to be done before treat area for 48 hours after completion of
waterproofing. Leakages if any observed during flood testing may be treated
appropriately and once again checked by flood testing.
After two coats has dried up laying as per average thick waterproofing Protective
screed/plaster admixed with SUNPLEX (330 gms per 50 KG bag of Cement) - Shrinkage
compensating admixture followed by final finish.
Finish the Surface as per your specifications using Screed or BB coba, IPS, China Mosaic
etc.
Note: Final finish such us Screed or BB coba, IPS, China Mosaic etc. is not included in
above item. It will be added as per EIC/Clients Requirements.
Client Scope:
Accommodation, Cement, sand, Store, Power supply, water & lighting for working area
and safe access to all areas of work or item.
5 4 3 2 1
RCC Slab
4. Geotextile 150gsm