Professional Documents
Culture Documents
A. Floor Plan
i. Legend:
The blueprint indicates the floor tile finishes to be used in the flooring
of ground floor, first floor, and roof deck floor. In C1, C2, and C5 Porcelain
Floor Tiles was used with a dimension of 457mmx457mm, in C3 Ceramic Non-
slip Floor Tiles was used with a dimension of 406mmx406mm, in C6, C6A,
C6B Interlocking Paver Blocks was used with a dimension of 200mmx100mm,
in C4 Concrete Pavers was used with a dimension of 305mmx457mm, and in
C8 Fair-Faced Concrete was used with a dimension of 2000x1000mm. From
the indicated type of tiles those are needed for the flooring of the ground floor,
first floor and roof deck.
Lay tiles from the centerline of each space outward to obtain border tile
of equal width and larger dimension.
Lay tiles in grid pattern. Align joints if adjoining tiles on floor and walls
are the same size. Joints shall be uniform in width.
Set tile firmly on the mortar bed. Strings or pegs may be used to space
tiles that have no spacers. Bring all surfaces to a true plane at the proper
position or elevation. Thoroughly beat-in all tiles while the mortar bed is
still plastic.
Make adjustment of tile before initial set of the mortar takes place.
Terminate work neatly at obstructions, edges, and corners without
disturbing the pattern or joint alignment.
Grouting: before grouting, wet the joints between tiles if tiles have
become dry, force a maximum amount of grout into the joints, and fill all
gaps and skips. The finished grout shall be uniform in color, smooth, and
without voids, pinholes or low spots.
Cleaning: Upon completion of installation, clean all tile surfaces so they
are free of foreign matter and leave finished installation clean and free of
cracked, chipped, broken, non-bonded, or otherwise defective tile work.
iii. Ground Floor
For the First Floor, 27 fair faced concrete will be used on master’s
bedroom as well as bedrooms 1, 2, and 3. 10 of them is for the master’s
bedroom, 8 for bedroom-1, 7 for bedroom-2, and 2 for bedroom-3. Additionally,
100 ceramic nonslip floor tiles will occupy all the bathrooms on the said floor. 24
of them is for bathroom-2, and 38 each for bathrooms 3 and 4. Lastly, porcelain
floor tiles will be used for the lobby, balcony, and staircase.