Professional Documents
Culture Documents
A) Design (design report for toe wall of various heights as 2m, 2.5m and 3m.)
1. COMMENT - Please refer design report for toe wall of various heights as 2m,
2.5m and 3m, properties of backfill, active earth pressure coefficient (Ka)
shall be calculated as per clause no. 214.1of IRC:6-2014.
2. Please refer design report for toe wall of various heights as 2m, 2.5m and 3m,
stability analysis under normal case following shall be consider and modify
accordingly.
c. COMMENT - Check for stability without any fill, lever arm for load parallel
to founding line due to load at no. 1, 2 & 3 are not correct.
3.COMMENT - In design of toe wall of various height 2m, 2.5m & 3m, while
scrutiny it is noted that resolve component (parallel and perpendicular direction)
of forces considered in stability analysis without backfill. However, the same is
not considered in the stability analysis with backfill. It is not clear.
2.COMMENT - Please refer note @ sr. no. 3, "Toe wall" shall be mentioned instead
of "breast wall mentioned in the drawing. Please check and modify accordingly.
5. COMMENT - The details of "B5", "B6" are not mentioned in the dimensional
details table as mentioned in the detail of toe wall. Please check and modify
accordingly.