Professional Documents
Culture Documents
PMJ/MTS/CON/PTW
SDN BHD
Construction
Method Statements Painting Works Page : 1/2
Manual
1.0 OBJECTIVE
2.0 SCOPE
This method statement shall apply for all painting works on building and civil
engineering projects.
3.0 REFERENCES
4.0 DEFINITIONS
NIL
5.0 RESPONSIBILITY
Project/Site Engineer
Site Supervisor
6.0 MATERIALS
Handling: NIL
NIL
Construction
Method Statements Painting Works Page : 2/2
Manual
9.3 Protect appropriate fittings and other surfaces using plastic canvas or
equivalent material. Barricade the working radius and posted appropriate
signages. Provide secondary container for storage purpose. Standby
person shall be monitor and ensure all precaution measure has been
done prior to start work.
9.4 Before applying coatings, ensure moisture content of substrate will not
adversely affect the completed work.
9.7 Submit Request for Inspection Form before proceeding with the work.
9.9 File completed Receiving Inspection Checklist as per Project Filing Index.
10.2 Apply all painting materials as per Client’s instructions. The paint can be
applied by brushing and roller painting.
10.3 If primer is required, work primer well into surface, joints, angles and, on
timber, into end grain.
10.4 Apply undercoats and finishing coats evenly to give a continuous film,
free from runs, brush marks and other imperfections. Allow each coat to
dry before succeeding coat is applied.
10.5 Submit Request for Inspection Form for joint inspection with client/client’s
representative.