Professional Documents
Culture Documents
LESSON 1.
Establish the Context and Purpose of the Assessment:
- The Assessor must familiarize SELF with the qualification or unit of competencies
- Ensure that the assessment site complies with the relevant occupational health and safety requirements
- Ensure that the assessment resources are available
- The Assessor must ensure the Tools, Equipment and Facilities are ready and available in the assessment site before
the assessment start
- A checklist of tools, equipment and facilities must be on hand to help the Assessor
- The Checklist of Tools, Equipment and Facilities is included in the assessors guide.
LESSON 2:
Plan and Prepare the Evidence Gathering Process
- The assessor shall receive assessment package composed of the ff:
o 1 copy of assessors guide
o Specific instruction to the candidate
o CARS – Competency Assessment Result Summary
o Written report
o Written test
o Answer sheets
o Rating Sheets
Prepare the Candidate
The assessor shall introduce SELF
Good morning CANDIDATES! My name is _____and I am an ACCREDITED competency assessor for Shielded Metal Arc
Welding NC II
[ And I would like to acknowledge the presence of ] OR [ OK, Let me ACKNOWLEDGE 1 st the presence of … ]
Ms. Nelia Abellera – our Processing Officer
Mr. Edmark Paragas – our Assessment Center Manager
& Mr. Jazel Dave Enriquez –our Representative from TESDA Provincial Office ( Good moning Sir, Good morning ma’am )
You don’t have to worry about their presence. They/He are/is just here to oversee the conduct of assessment
And to check if the conduct of assessment is in accordance with the prescribe competency assessment, methodology and
Procedures. They/He will not assess you.
Before we start, Please rise for the PRAYER. AMEN. Take your seats. please submit your admission slip. Thank you…
thankkk you… thank you,…
As I call your name, please acknowledge by raising your hand and sign the attendance sheet and please prepare any
Identification card as a means of verification, TO avoid impersonation. ANOTHER way to verify is - your attendance signature
should match your ID signature , and if you don’t have any ID, then it should match your Application Form.
Ms. Maritess Politipot….please sign here… verification check,… thank you
Mr. yohan Nakasuka.. .. “ “ “ “ … thank you..
I have here with me, your Accomplished Application form & Self assessment guide
This is an indication that you know and can perform all the units of competencies enumerated for Shielded Metal Arc
Welding NC II.
Good morning candidates!
Welcome to __________ our venue for the conduct of national assessment
My name is _________, I am a TESDA accredited assessor in Qualification of Shielded Metal Arc Welding NCIII
(show) here’s my IDENTIFICATION CARD as a proof of my accreditation and (show) LETTER OF APPOINTMENT from
the Assessment Center.
I would like to acknowledge the presence of ______ACAC MANAGER, _____our REPRESENTATIVE from TESDA
Provincial Office, and ____ Our PROCESSING OFFICER.
YOU don’t have to worry about their presence. They are here to oversee and observe the Conduct Competency
Assessment and Procedure. They will not assess you.
Before I will start, may I ask the attendance sheet. Please present to me your admission slip once your name is
called.
I have here with me your ACCOMPLISH SELF ASSESSMENT GUIDE (SAG)
This is a proof that you know and can perform that all of the unit of competencies under the SMAW NCII
Today , I am going to administer the full qualification of SMAW NCIII
This Qualification consist of only 1 Core Competency which is Weld Carbon Steel Plates and Pipes Using SMAW
This unit/units are clustered from one assessment package for full qualification.
The PURPOSE of National Assessment aims to determine the level of your competency and for the issuance of
National Certificate Level III issued by the TESDA and will serve as a License for employment with a Validity of 5
years.
I am going to use Demonstration and Oral Questioning to Assess you Underpinning Knowledgeand Underpinning
Skills
There will be two assessment result – named COMPETENT & NOT YET COMPETENT.
o IF found to be COMPETENT, you can get your NC after 5 working days at the TESDA Office. Just bring with
you your Competency Assessment Result Summary (CARS), your passport size picture with collar and white
background and P50 for processing fee
o IF you found to be NOT YET COMPETENT, you are qualified for re-assessment. Just go to the nearest
assessment center and schedule your reassessment anytime.
o IF you are not satisfied with the assessment result, you may write a letter of appeal addressed to the TESDA
Provincial Director
For the allowable adjustment, we have CR at the end of the hallway, the Cafeteria is located at the ground floor of
the building.
For DO’S & DON’T’S, Only I as the ASSESSOR, The ACAC MANAGER and the TESDA REPRESENTATIVE are allowed
inside the Assessment Venue to ensure the confidentiality of the assessment process and result.
Please observe PRECAUTIONARY MEASURES in handling tools
Is there any questions?
If none, I will not distribute the Competency Assessment Agreement
Please READ the Instructions carefully and answer all the questions. If you need assistance, I will be more wiling to
assist you.
Are you DONE?
Please submit to me your Competency Assessment Agreement
I will now assign your number
o Mr/Ms____ you are candidate #1
o Mr/Ms____ you are candidate #2
SPECIFIC INSTRUCTIONS
I WILL now distribute the Specific Instruction. Here are the Specific Instructions. Please READ Carefully and IF you
have CLARIFICATION, please approach me.
Is there any questions? (NONE)
Do you want me to translate it to your local dialect? (No Ma’am/Sir)
Are you READY?
Candidate #1, Mr/Ms _____ please proceed to the assessment room , while you candidate #2 Mr/Ms _____, please
stay here and wait for your turn
FEEDBAK 1
Based on your performance and the evidences that I’ve gathered, you did well in ____ you are also good in ____...
and with that, you meet the minimum requirements and standards for this qualification.
o I congratulate you, please sign this RATING SHEET as well as the COMPETENCY ASSESSMENT RESULT
SUMMARY. [ PIPIRMA KA DIN ]
o Pumunta ka kay ACAC MANAGER ipapirma ang CARS
o After that, ASK the candidate to evaluate your performance as assessor
o [Detach the CARS], Here’s your Competency Assessment Result Summary, Please present this to the nearest
TESDA office to claim your National Certificate Level 3.
o After 5 working days, just bring with you your passport size picture, white background with collar and P50
for processing fee
- Again, Congratulations.
a mga gustong mag-apply sa free assessment na ito, idala lang ang mga sumusunod na requirements:
2 pcs. Passport size ID picture (white background with collar shirt and nametag)
1 pc. Copy of Birth Certificate / PSA
1 pc. Original copy of Certificate of employment
1 pc. Certificate of "Practicing Covid-19 Preventive Measures in the Workplace" (https://e-tesda.gov.ph/)