Professional Documents
Culture Documents
Designed: K. Toral
Checked: R. Mendoza Jr.
1. Indicate general notes and instructions in this section to guide engineers how to use the sprea
2. Briefly describe the procedure and methodology used in the calculation
Rev. No:
Date: 11/11/2022
Date: 11/11/2022
e spreadsheet.
Design Calculations
Calculations References
Calculation ID = 0
Jacket ID = 6
Wave Period ,T = 8 sec NAMRIA
Water depth ,d = 15 m NAMRIA
Wave Height ,H = 5.5 m NAMRIA
Theta Angle ,Ɵ = 0 degrees
Draft, m = 11.4 m
Outside Diameter, mm = 1524 mm
Inside Diameter, mm = 1454 mm
No. of Steel Pipes = 10
Wind drag coefficient (Cwd) = 1.2 Engineering Standards for Ports and Harbors, 2009 pg.186
Projected Area for wind drag (m²) = 30.2
Wind Velocity (kph) = 35.0
Wind Drag Force (Fwind) ,kN = 2.1
Design Calculations
Calculations
Jacket ID = 6
Wave Period ,T = 8 sec
Water depth ,d = 15 m
Wave Height ,H = 5.5 m
Jacket Height, h = 18 m
Draft, m = 11.4 m
Outside Diameter, mm = 1524 mm
Inside Diameter, mm = 1454 mm
No. of Steel Pipes = 10
Drag Coefficient, Cd = 1.00
Coefficient of Inertia, Cm = 2.00
Weight of Jacket, kN = 3385.43 kN
Projected Area for Wave drag (m ²) = 52.12 m²
Wind drag coefficient (Cwd) = 1.2
Projected Area for wind drag (m ²) = 30.2 m²
Wind Velocity (kph) = 35.0 kph
Theta Ɵ Calculation ID Velocity Acceleration Force Drag Force Inertia Wave Force Wind Drag Force
1 2
0 0 0 2.47 0.00 163.92 0.00 163.92 2.10
0 0 0 163.92 0.00 163.92 2.104
90 π/2 90 0.00 7.46 7.46 2.104
180 π 180 163.92 0.00 163.92 2.104
270 3π / 2 270 0.00 -7.46 -7.46 2.104
360 2π 360 163.92 0.00 163.92 2.104
Design Calculations
Calculations
Jacket ID = 6
Weight, kN = 3385.43 kN
Wave Force, kN = 163.92 kN
Wind Drag Force, kN = 2.10 kN
Draft, m = 11.4 m
Jacket Height, h = 18 m
Outside Diameter, mm = 1524 mm
Inside Diameter, mm = 1454 mm
No. of Steel Pipes = 10