Professional Documents
Culture Documents
Die切割分离 Die Saw 管理 MD3008 条件确认,记录 1回/班 MD3006-1 制造作业员 制造领班 作业中止,调修机器 设备工程師
Die Saw Isolation Die Saw Management Parameter check . Record Once/Shift Prod.oper. Prod. Leader stop working , adjust machine Equip. Eng.
纯水纯度 CO2处理机 1回/班 1.2~1.5MΩ MD3006-1 製造領班 製造組長/品檢員
D.I Water CO2处理机 Once/Shift 1.2~1.5MΩ Prod. Leader Prod. Supervior/QC
自主检验 外观 QC3009 5-90倍显微镜/高倍显微镜 5区域×5PCS=25PCS,每片检验5区, 0:1 MD3006-1 制造作业员 制造领班 异常品需全检。 制造领班
Self Insp. Visual High microscope 如有不良该片进行全检 Prod.oper. Prod. Leader abnormal ones need total inspection Prod. Leader
5 Area×5PCS=25PCS
If NG, must Insp. All
L/F 进料 L/F 进料检验 Lot 检验 L/F外观 QC3022 目視(5-90倍显微镜) 1回/Lot 0收1退 QC3022-1 品检员 品检工程师 判定NG時全数退貨 QA. 工程師
L/F In-Com L/F In-come Lot Insp. L/F Visual Visual Insp. Per Lot QC. QC. Leader return all when judging NG QA. Eng.
inspection (Amp. microscope× 5~90) 不良L/F联络客户及决议处理方式
contact customer for abnormal L/Fand solution
Die Bond Frame与Die接著 ESEC 2007 更换机种确认 外观 QC3004 目视 更换机种时 不符合标准时 QC3004-1 制造作业员 制造领班/QC 停机、材料对策後再決定是否开机作业 设备工程師
(焊粒) Bonding Die Frame ESEC 2008 Change Type Visual Visual Insp. When changing Type not conform to standards Prod. Leader Prod. Supervior/QC stop machine,consider starting again Equip. Eng.
Confirm Green card after checking
外观检验 QC3004 5-90倍显微镜 更换机种时 (n=1LF), 0:1 QC3004-1 设备技术员 设备工程师
Visual 5~90 microscope Equip.Technician Equip. Eng.
When changing Type (n=1LF),Insp. All areas.
晶粒推力 QC3005 DAGE4000/5-90倍显微镜 更换机种时 (n=5 pcs) 0:1 QC3005-1 品检员 品检员
Die Shear dage 4000 tester/ When changing Type(n=5 pcs) QC. QC. Leader
5~90 microscope
頂針痕確認 QC3004 5-90倍显微镜 1回/更换机种 (n=5 pcs) 0:1 QC3004-1
Tool Mark 5~90 microscope once/changing Type (n=5 pcs)
首件检验 外观 QC3004 5-90倍显微镜 0:1 QC3004-1 制造作业员 制造领班 停机,设备、材料对策后再决定是否开机 设备工程师
n=1LF。 (新開機時、D/B更換机种、修機/調機後)
Insp. Firstly Visual 5~90 microscope Prod.Leader Prod. Supervior stop machine,consider starting again Equip. Eng.
n=1LF ,Insp. All areas.(start machine 、D/Bchange after checking
collet、machine maintenance/adjusting) 不良品参考规范内容处理(MD3024)
自主檢驗 外观 QC3004 5-90倍显微镜 1回/批 (n=1LF)﹐ 0:1 MD3011-2 制造作业员 制造领班 abnomality handling, refer to (MD3024)
Self Insp. Visual 5~90 microscope Prod. Leader Prod. Supervior
once/LOT(n=1LF),Insp. All areas.
solder Die Bond管理 MD3011 条件确认,记录 1回/班 製造作業員 製造領班 作业中止,设备调整 製造領班
MD3011-2
Process Die Bond Management Parameter check,Record Once/Shift Prod.oper. Prod. Leader stop working , adjust machine Prod. Leader
Epoxy Process Die Bond管理 MD3011 条件确认,记录 1回/班 製造作業員 製造領班 作業中止,設備調整 製造領班
MD3011-2
Die Bond Management Parameter check,Record Once/Shift Prod.oper. Prod. Leader stop working , adjust machine Prod. Leader
銀膠管理 MD3025 檢查.定期交換 MD3025-1 设备技术员 设备工程师 设备工程師
Epoxy Control Check,change regularly Equip.Technician Equip. Eng. Equip. Eng.
QC巡迴檢驗 停机,设备、材料对策后再決定是否开机作业 设备工程師
IPQC 外觀 5-90倍显微镜 1回/4个小时 (n=1LF) ‧stop machine,consider starting again after checking Equip. Eng.
Visual QC3004 5~90 microscope once/4hour(n=1LF) 0:1 QC3004-1 不良品参考规范内容处理(MD3011)