Professional Documents
Culture Documents
l-his JHA to be available at all points of work - operatives must be informed of this JHA and
understand the risks involved in the works.
safety condition
irements: Tool box talk / pre-job brief to be given at the staft of each work shift and before starting a new task
or activity.
Summer and Ramadan working hours changes are to be observed and details posted at worksite.
is criteria:
.Severky'
. Insignificant (1) Minor (2) Moderate (3) Major (4) Catastrophic (5)
2 '3 4 5
1 ' 8,r.i r,::r - r 1$:.: q. ,..
I 4 6 ':',,
6 9, 12, ',,:
4 8 ,12,
5 10
ffi Extreme Risk (E) Activity must not proceed in current form.
Activity must be modified to include further control measures and be subject to detailed
2 Hish Risk (H)
HSE dept. assessment.
Activity can proceed subject to appropriate direct and continuous supervision and/or
Moderate Risk (M)
task modification.
No action required. Activity can proceed subject to compliance with the specified control
Low Risk ((L)
measures.
tor Likely- Frequency Probability
Environment ,,,,
Health and Safety,. 1. ,.. :
nt Continuous or will happen frequently. Occurs several times a year at location. 5
Occurs several times a year in slmilar
n 5 - 12 times per year.
industries in Iraq
4
4. Use competent
rigger, flagman
and operator (
have ceftificate
3,a party ).
5. Check lifting
gear
7, Fire extinguisher
to be near of
working area
8. Make properand
good barricade
for lifting zone
il ConductTBM
l!All workers
involved in the
workoperation
to wear the
approved PPE.
S Training workers in
manual techniques
fi oitspitl Fore
Il Extreme wind conditions. Hearing - Qualified Workerto
impairment be required.
ll Simultaneous
activities(Inteface) fire and - Inspect tool priorto
of other workers in explosion process
area which
- Set up barrier and
exposes additional
warning signs.
danger of workers
being injured - communicating with
crane by qualified
rigger only.
- Fire extinguisher
to be near of
working area
- Licensed &
authorized operator &
Crane to be
confirmed.
- Rigging with
communicating for
crane by qualified
rigger only.
- No one will be
allowed under
suspended unload.
- Lifting will be
closely supervised by
competent people in
attendance.
- Assigned
Competent Rigging
Supervisor and
Riggers.
- Follow relevant
HDGSK-JV HSE
procedure
Using PowerTools Electrical shock 1-Multiple M S Proper cable Cons
fatality management such as
Sparks electric proof type of
2- fire and hanger
Noise explosion
3- Hearing E Do not use supe
impairment damaged tool and
cable
I only trained /
competent persons will
be authorized to work on
power tools
I Hearing protection
ft Secured harness to be
worn
2) Wearsafety
shoes.
3) Weardust
mask if
needed.
B Notice:
i, This JHA/RA developed as a standardized example .discipline engineer/ supervisor should review the JHA,/M for each specific work and add additional
applicable hazard , control measures before issue the final JHA/RA .