Professional Documents
Culture Documents
Total
Description of Work
Quantity
#REF! Earth work excavation for foundations (Mechanical Means) for Earth work excavation Earth work excavation
buildings in ordinary soils and depositing on bank for all lifts
and with an initial lead of 10m and up to 3m depth including all
operational,incidental, labour charges such as shoring,
sheeting, planking, strutting etc., and overheads & contractors
profit complete for finished item of work excluding dewatering
charges etc., as per SS 20 B(APSS 308)
11060 Earth work excavation for foundations (Mechanical Means) for Earth work excavation Earth work excavation
buildings in ordinary soils and depositing on bank for all lifts
and with an initial lead of 10m and 3m to 6m depth including
all operational,incidental, labour charges such as shoring,
sheeting, planking, strutting etc., and overheads & contractors
profit complete for finished item of work excluding dewatering
charges etc., as per SS 20 B(APSS 308)
2621 Earth work excavation for foundations (Mechanical Means) for Earth work excavation Earth work excavation
buildings in ordinary rock (not requiring blasting) and
depositing on bank for all lifts and with an initial lead of 10m and
up to 3m depth including all operational,incidental, labour
charges such as shoring, sheeting, planking, strutting etc., and
overheads & contractors profit complete for finished item of
work excluding dewatering charges etc., as per SS 20 B(APSS
308)
575 Earth work excavation for foundations for buildings in hard Earth work excavation Earth work excavation
rock (blasting prohibited) and depositing on bank for all lifts and
with an initial lead of 10m and up to 3m depth including all
operational,incidental, labour charges such as shoring,
sheeting, planking, strutting etc., and overheads & contractors
profit complete for finished item of work excluding dewatering
charges etc., as per SS 20 B(APSS 308)
1500 Plain Cement Concrete (1:4:8) (cement: fine aggregate: Plain Cement Concrete (1:4:8) Plain Cement Concrete (1:4:8)
Coarse aggregate) for foundations using coarse aggregate
40mm size hard , machine crushed granite from approved
quarry using concrete Mixer 10 / 7 cft (0.2 / 0.8 cum) capacity
including cost and conveyance of all materials like cement,
sand, coarse aggregate, water etc. to site including all charges
for machine mixing and hire charges of concrete mixer, laying
concrete in foundations and under flooring bed, ramming in 15
cm layers finishing top surface to the required level curing
etc.,and overheads & contractors profit complete for finished
item of work. (APSS No. 402) For Foundation
#REF! Plain Cement Concrete (1:5:10) (cement: fine aggregate: Plain Cement Concrete (1:4:10) Plain Cement Concrete (1:4:10)
Coarse aggregate) for foundations and under flooring bed
using coarse aggregate 40mm size hard , machine crushed
granite from approved quarry using concrete Mixer 10 / 7 cft
(0.2 / 0.8 cum) capacity including cost and conveyance of all
materials like cement, sand, coarse aggregate, water etc. to site
including all charges for machine mixing and hire charges of
concrete mixer, laying concrete in foundations and under
flooring bed, ramming in 15 cm layers finishing top surface to
the required level curing etc.,and overheads & contractors profit
complete for finished item of work. (APSS No. 402)
21736 Filling with useful available excavated earth (excluding rock) Filling with useful available Filling with useful available excavated
with a lead of 50 m in trenches, sides of foundations and excavated earth earth
basement with initial lead in layers not exceeding 15cm thick,
watering and ramming including cost and conveyance of water
to work site and all operaitonal, incidental, labour charges, hire
charges of T&P etc., and overheads & contractors profit
complete for fnished item of work (APSS NO.309&310)
3237 Pre construction Anti termite treatment is a process in which Pre construction Anti termite Pre construction Anti termite treatment
chemical toxic to subterrean tremites is apply/ inject into soil treatment
during early stage of building Construction 2. Treatement of soil
Beneath the building and around the foundations conduct and
chemical use as per BIS - IS 6313 (Part -2) 2013 code
specification & CIB RC registered termiticide which creates a
continuous chemical barrier beneath the building which kills or
repels terminates & impervious to tremite entry 3. Imidacloprid
30.5% SC (IS 63131) dissolve 2.1 Ml/1 liter of water and apply
emulsion/solution @ 7.5 Litres/Square meter (Sqm) of internal,
external vertical surface of the colums, plinth beams (Back
filling) walls and floor junction, external perimeters, along
reatining wall @ 5.0 Liters/Sqm of the horizontal surface of
basement top surface of the basement filling below flooring bed
(Plinth) & @ 2.0 Litres/ Line meter at expansion joints. The
substructure of a depth of 500mm around coulmns & 300mm
deep around plinth beams, basements & floor filling area
including excavation channel along the wall & rodding etc. cost
& Conveyance of all materials to the site, cost of labour for
sparying, rodding, overheads and contractor profit etc. complete
for furnished item of work as per the approval of the Engineer-
in-charge
#REF! Supply and placing of the Design Mix Concrete M 30 grade Supply and placing of the Design Supply and placing of the Design Mix
corresponding to IS 456 with minimum cement content of 400 Mix Concrete M 30 grade Concrete M 30 grade
kgs per 1 cum of concrete using batching and mixing plant of 15
cum per hour capacity with 20mm size graded machine crushed
hard granite metal (coarse aggregate - as per IS 383 - 1970 and
IS 2386 Part 1 to Part 8) from approved quarry including cost
and conveyance of all materials like cement, fine aggregate
(sand) coarse aggregate, water etc., to site, centering using
steel scaffolding pipes , jack props , wallers , foot plates ,
brackets , steel centering plates etc., including all operational,
incidental and labour charges, transporting concrete using
transit mixer, lifting concrete mechnically, laying concrete using
concrete pump, vibrating, curing etc., and overheads &
contractors profit complete but excluding cost of steel and its
fabrication charges for finished item of work (APSS No. 402)
Footings
2796 Supply and placing of the Design Mix Concrete M 30 grade Supply and placing of the Design Supply and placing of the Design Mix
corresponding to IS 456 with minimum cement content of 400 Mix Concrete M 30 grade Concrete M 30 grade
kgs per 1 cum of concrete using batching and mixing plant of 15
cum per hour capacity with 20mm size graded machine crushed
hard granite metal (coarse aggregate - as per IS 383 - 1970 and
IS 2386 Part 1 to Part 8) from approved quarry including cost
and conveyance of all materials like cement, fine aggregate
(sand) coarse aggregate, water etc., to site, centering using
steel scaffolding pipes , jack props , wallers , foot plates ,
brackets , steel centering plates etc., including all operational,
incidental and labour charges, transporting concrete using
transit mixer, lifting concrete mechnically, laying concrete using
concrete pump, vibrating, curing etc., and overheads &
contractors profit complete but excluding cost of steel and its
fabrication charges for finished item of work (APSS No. 402)
Raft Concrete
119 Supply and placing of the Design Mix Concrete M 30 grade Supply and placing of the Design Supply and placing of the Design Mix
corresponding to IS 456 with minimum cement content of 400 Mix Concrete M 30 grade Concrete M 30 grade
kgs per 1 cum of concrete using batching and mixing plant of 15
cum per hour capacity with 20mm size graded machine crushed
hard granite metal (coarse aggregate - as per IS 383 - 1970 and
IS 2386 Part 1 to Part 8) from approved quarry including cost
and conveyance of all materials like cement, fine aggregate
(sand) coarse aggregate, water etc., to site, centering using
steel scaffolding pipes , jack props , wallers , foot plates ,
brackets , steel centering plates etc., including all operational,
incidental and labour charges, transporting concrete using
transit mixer, lifting concrete mechnically, laying concrete using
concrete pump, vibrating, curing etc., and overheads &
contractors profit complete but excluding cost of steel and its
fabrication charges for finished item of work (APSS No. 402)
Column Pedastals
#REF! Supply and placing of the Design Mix Concrete M 30 grade Supply and placing of the Design Supply and placing of the Design Mix
corresponding to IS 456 with minimum cement content of 400 Mix Concrete M 30 grade Concrete M 30 grade
kgs per 1 cum of concrete using batching and mixing plant of 15
cum per hour capacity with 20mm size graded machine crushed
hard granite metal (coarse aggregate - as per IS 383 - 1970 and
IS 2386 Part 1 to Part 8) from approved quarry including cost
and conveyance of all materials like cement, fine aggregate
(sand) coarse aggregate, water etc., to site, centering using
steel scaffolding pipes , jack props , wallers , foot plates ,
brackets , steel centering plates etc., including all operational,
incidental and labour charges, transporting concrete using
transit mixer, lifting concrete mechnically, laying concrete using
concrete pump, vibrating, curing etc., and overheads &
contractors profit complete but excluding cost of steel and its
fabrication charges for finished item of work (APSS No. 402)
Plinth Beams
35 Supply and placing of the Design Mix Concrete M 30 grade Supply and placing of the Design Supply and placing of the Design Mix
corresponding to IS 456 with minimum cement content of 400 Mix Concrete M 30 grade Concrete M 30 grade
kgs per 1 cum of concrete using batching and mixing plant of 15
cum per hour capacity with 20mm size graded machine crushed
hard granite metal (coarse aggregate - as per IS 383 - 1970 and
IS 2386 Part 1 to Part 8) from approved quarry including cost
and conveyance of all materials like cement, fine aggregate
(sand) coarse aggregate, water etc., to site, centering using
steel scaffolding pipes , jack props , wallers , foot plates ,
brackets , steel centering plates etc., including all operational,
incidental and labour charges, transporting concrete using
transit mixer, lifting concrete mechnically, laying concrete using
concrete pump, vibrating, curing etc., and overheads &
contractors profit complete but excluding cost of steel and its
fabrication charges for finished item of work (APSS No. 402)
Tie Beam
246 Supply and placing of the Design Mix Concrete M 30 grade Supply and placing of the Design Supply and placing of the Design Mix
corresponding to IS 456 with minimum cement content of 400 Mix Concrete M 30 grade Concrete M 30 grade
kgs per 1 cum of concrete using batching and mixing plant of 15
cum per hour capacity with 20mm size graded machine crushed
hard granite metal (coarse aggregate - as per IS 383 - 1970 and
IS 2386 Part 1 to Part 8) from approved quarry including cost
and conveyance of all materials like cement, fine aggregate
(sand) coarse aggregate, water etc., to site, centering using
steel scaffolding pipes , jack props , wallers , foot plates ,
brackets , steel centering plates etc., including all operational,
incidental and labour charges, transporting concrete using
transit mixer, lifting concrete mechnically, laying concrete using
concrete pump, vibrating, curing etc., and overheads &
contractors profit complete but excluding cost of steel and its
fabrication charges for finished item of work (APSS No. 402)
STP Bottom Slab/Sump Bottom Slab
4.3 Supply and placing of the Design Mix Concrete M 30 grade Supply and placing of the Design Supply and placing of the Design Mix
corresponding to IS 456 with minimum cement content of 400 Mix Concrete M 30 grade Concrete M 30 grade
kgs per 1 cum of concrete using batching and mixing plant of 15
cum per hour capacity with 20mm size graded machine crushed
hard granite metal (coarse aggregate - as per IS 383 - 1970 and
IS 2386 Part 1 to Part 8) from approved quarry including cost
and conveyance of all materials like cement, fine aggregate
(sand) coarse aggregate, water etc., to site, centering using
steel scaffolding pipes , jack props , wallers , foot plates ,
brackets , steel centering plates etc., including all operational,
incidental and labour charges, transporting concrete using
transit mixer, lifting concrete mechnically, laying concrete using
concrete pump, vibrating, curing etc., and overheads &
contractors profit complete but excluding cost of steel and its
fabrication charges for finished item of work (APSS No. 402)
Haunch Concrete
145 Supply and placing of the Design Mix Concrete M 30 grade Supply and placing of the Design Supply and placing of the Design Mix
corresponding to IS 456 with minimum cement content of 400 Mix Concrete M 30 grade Concrete M 30 grade
kgs per 1 cum of concrete using batching and mixing plant of
15 cum per hour capacity with 20mm size graded machine
crushed hard granite metal (coarse aggregate - as per IS 383 -
1970 and IS 2386 Part 1 to Part 8) from approved quarry
including cost and conveyance of all materials like cement, fine
aggregate (sand) coarse aggregate, water etc., to site,
centering using casurina ballies, bamboos, wooden reapers,
runners, wood posts, wall plates etc., including all operational,
incidental and labour charges ,transporting concrete using
transit mixer, lifting concrete mechnically, laying concrete using
concrete pump, vibrating, curing , overheads & contractors profit
etc., complete but excluding cost of steel and its fabrication
charges for finished item of work (APSS No. 402)
Columns :
Cellar :
251 Supply and placing of the Design Mix Concrete M 30 grade Supply and placing of the Design Supply and placing of the Design Mix
corresponding to IS 456 with minimum cement content of 400 Mix Concrete M 30 grade Concrete M 30 grade
kgs per 1 cum of concrete using batching and mixing plant of
15 cum per hour capacity with 20mm size graded machine
crushed hard granite metal (coarse aggregate - as per IS 383 -
1970 and IS 2386 Part 1 to Part 8) from approved quarry
including cost and conveyance of all materials like cement, fine
aggregate (sand) coarse aggregate, water etc., to site,
centering using casurina ballies, bamboos, wooden reapers,
runners, wood posts, wall plates etc., including all operational,
incidental and labour charges ,transporting concrete using
transit mixer, lifting concrete mechnically, laying concrete using
concrete pump, vibrating, curing , overheads & contractors profit
etc., complete but excluding cost of steel and its fabrication
charges for finished item of work (APSS No. 402)
Columns :
Basement Floor
#REF! Supply and placing of the Design Mix Concrete M 30 grade Supply and placing of the Design Supply and placing of the Design Mix
corresponding to IS 456 with minimum cement content of 400 Mix Concrete M 30 grade Concrete M 30 grade
kgs per 1 cum of concrete using batching and mixing plant of
15 cum per hour capacity with 20mm size graded machine
crushed hard granite metal (coarse aggregate - as per IS 383 -
1970 and IS 2386 Part 1 to Part 8) from approved quarry
including cost and conveyance of all materials like cement, fine
aggregate (sand) coarse aggregate, water etc., to site,
centering using casurina ballies, bamboos, wooden reapers,
runners, wood posts, wall plates etc., including all operational,
incidental and labour charges ,transporting concrete using
transit mixer, lifting concrete mechnically, laying concrete using
concrete pump, vibrating, curing , overheads & contractors profit
etc., complete but excluding cost of steel and its fabrication
charges for finished item of work (APSS No. 402)
Columns :
First Floor :
214 Supply and placing of the Design Mix Concrete M 30 grade Supply and placing of the Design Supply and placing of the Design Mix
corresponding to IS 456 with minimum cement content of 400 Mix Concrete M 30 grade Concrete M 30 grade
kgs per 1 cum of concrete using batching and mixing plant of
15 cum per hour capacity with 20mm size graded machine
crushed hard granite metal (coarse aggregate - as per IS 383 -
1970 and IS 2386 Part 1 to Part 8) from approved quarry
including cost and conveyance of all materials like cement, fine
aggregate (sand) coarse aggregate, water etc., to site,
centering using casurina ballies, bamboos, wooden reapers,
runners, wood posts, wall plates etc., including all operational,
incidental and labour charges ,transporting concrete using
transit mixer, lifting concrete mechnically, laying concrete using
concrete pump, vibrating, curing , overheads & contractors profit
etc., complete but excluding cost of steel and its fabrication
charges for finished item of work (APSS No. 402)
Columns :
Second Floor :
214 Supply and placing of the Design Mix Concrete M 30 grade Supply and placing of the Design Supply and placing of the Design Mix
corresponding to IS 456 with minimum cement content of 400 Mix Concrete M 30 grade Concrete M 30 grade
kgs per 1 cum of concrete using batching and mixing plant of
15 cum per hour capacity with 20mm size graded machine
crushed hard granite metal (coarse aggregate - as per IS 383 -
1970 and IS 2386 Part 1 to Part 8) from approved quarry
including cost and conveyance of all materials like cement, fine
aggregate (sand) coarse aggregate, water etc., to site,
centering using casurina ballies, bamboos, wooden reapers,
runners, wood posts, wall plates etc., including all operational,
incidental and labour charges ,transporting concrete using
transit mixer, lifting concrete mechnically, laying concrete using
concrete pump, vibrating, curing , overheads & contractors profit
etc., complete but excluding cost of steel and its fabrication
charges for finished item of work (APSS No. 402)
Columns :
Fourth Floor :
45 Supply and placing of the Design Mix Concrete M 30 grade Supply and placing of the Design Supply and placing of the Design Mix
corresponding to IS 456 with minimum cement content of 400 Mix Concrete M 30 grade Concrete M 30 grade
kgs per 1 cum of concrete using batching and mixing plant of
15 cum per hour capacity with 20mm size graded machine
crushed hard granite metal (coarse aggregate - as per IS 383 -
1970 and IS 2386 Part 1 to Part 8) from approved quarry
including cost and conveyance of all materials like cement, fine
aggregate (sand) coarse aggregate, water etc., to site,
centering using casurina ballies, bamboos, wooden reapers,
runners, wood posts, wall plates etc., including all operational,
incidental and labour charges ,transporting concrete using
transit mixer, lifting concrete mechnically, laying concrete using
concrete pump, vibrating, curing , overheads & contractors profit
etc., complete but excluding cost of steel and its fabrication
charges for finished item of work (APSS No. 402)
Columns :
Fifth Floor :
10 Supply and placing of the Design Mix Concrete M 30 grade Supply and placing of the Design Supply and placing of the Design Mix
corresponding to IS 456 with minimum cement content of 400 Mix Concrete M 30 grade Concrete M 30 grade
kgs per 1 cum of concrete using batching and mixing plant of
15 cum per hour capacity with 20mm size graded machine
crushed hard granite metal (coarse aggregate - as per IS 383 -
1970 and IS 2386 Part 1 to Part 8) from approved quarry
including cost and conveyance of all materials like cement, fine
aggregate (sand) coarse aggregate, water etc., to site,
centering using casurina ballies, bamboos, wooden reapers,
runners, wood posts, wall plates etc., including all operational,
incidental and labour charges ,transporting concrete using
transit mixer, lifting concrete mechnically, laying concrete using
concrete pump, vibrating, curing , overheads & contractors profit
etc., complete but excluding cost of steel and its fabrication
charges for finished item of work (APSS No. 402)
Lintels
Cellar :
22 Supply and placing of the Design Mix Concrete M 30 grade Supply and placing of the Design Supply and placing of the Design Mix
corresponding to IS 456 with minimum cement content of 400 Mix Concrete M 30 grade Concrete M 30 grade
kgs per 1 cum of concrete using batching and mixing plant of
15 cum per hour capacity with 20mm size graded machine
crushed hard granite metal (coarse aggregate - as per IS 383 -
1970 and IS 2386 Part 1 to Part 8) from approved quarry
including cost and conveyance of all materials like cement, fine
aggregate (sand) coarse aggregate, water etc., to site,
centering using casurina ballies, bamboos, wooden reapers,
runners, wood posts, wall plates etc., including all operational,
incidental and labour charges ,transporting concrete using
transit mixer, lifting concrete mechnically, laying concrete using
concrete pump, vibrating, curing , overheads & contractors profit
etc., complete but excluding cost of steel and its fabrication
charges for finished item of work (APSS No. 402)
Lintels
Basement Floor
12 Supply and placing of the Design Mix Concrete M 30 grade Supply and placing of the Design Supply and placing of the Design Mix
corresponding to IS 456 with minimum cement content of 400 Mix Concrete M 30 grade Concrete M 30 grade
kgs per 1 cum of concrete using batching and mixing plant of
15 cum per hour capacity with 20mm size graded machine
crushed hard granite metal (coarse aggregate - as per IS 383 -
1970 and IS 2386 Part 1 to Part 8) from approved quarry
including cost and conveyance of all materials like cement, fine
aggregate (sand) coarse aggregate, water etc., to site,
centering using casurina ballies, bamboos, wooden reapers,
runners, wood posts, wall plates etc., including all operational,
incidental and labour charges ,transporting concrete using
transit mixer, lifting concrete mechnically, laying concrete using
concrete pump, vibrating, curing , overheads & contractors profit
etc., complete but excluding cost of steel and its fabrication
charges for finished item of work (APSS No. 402)
Lintels
First Floor :
21 Supply and placing of the Design Mix Concrete M 30 grade Supply and placing of the Design Supply and placing of the Design Mix
corresponding to IS 456 with minimum cement content of 400 Mix Concrete M 30 grade Concrete M 30 grade
kgs per 1 cum of concrete using batching and mixing plant of
15 cum per hour capacity with 20mm size graded machine
crushed hard granite metal (coarse aggregate - as per IS 383 -
1970 and IS 2386 Part 1 to Part 8) from approved quarry
including cost and conveyance of all materials like cement, fine
aggregate (sand) coarse aggregate, water etc., to site,
centering using casurina ballies, bamboos, wooden reapers,
runners, wood posts, wall plates etc., including all operational,
incidental and labour charges ,transporting concrete using
transit mixer, lifting concrete mechnically, laying concrete using
concrete pump, vibrating, curing , overheads & contractors profit
etc., complete but excluding cost of steel and its fabrication
charges for finished item of work (APSS No. 402)
Lintels
Second Floor :
15 Supply and placing of the Design Mix Concrete M 30 grade Supply and placing of the Design Supply and placing of the Design Mix
corresponding to IS 456 with minimum cement content of 400 Mix Concrete M 30 grade Concrete M 30 grade
kgs per 1 cum of concrete using batching and mixing plant of
15 cum per hour capacity with 20mm size graded machine
crushed hard granite metal (coarse aggregate - as per IS 383 -
1970 and IS 2386 Part 1 to Part 8) from approved quarry
including cost and conveyance of all materials like cement, fine
aggregate (sand) coarse aggregate, water etc., to site,
centering using casurina ballies, bamboos, wooden reapers,
runners, wood posts, wall plates etc., including all operational,
incidental and labour charges ,transporting concrete using
transit mixer, lifting concrete mechnically, laying concrete using
concrete pump, vibrating, curing , overheads & contractors profit
etc., complete but excluding cost of steel and its fabrication
charges for finished item of work (APSS No. 402)
Lintels
Third Floor :
21 Supply and placing of the Design Mix Concrete M 30 grade Supply and placing of the Design Supply and placing of the Design Mix
corresponding to IS 456 with minimum cement content of 400 Mix Concrete M 30 grade Concrete M 30 grade
kgs per 1 cum of concrete using batching and mixing plant of
15 cum per hour capacity with 20mm size graded machine
crushed hard granite metal (coarse aggregate - as per IS 383 -
1970 and IS 2386 Part 1 to Part 8) from approved quarry
including cost and conveyance of all materials like cement, fine
aggregate (sand) coarse aggregate, water etc., to site,
centering using casurina ballies, bamboos, wooden reapers,
runners, wood posts, wall plates etc., including all operational,
incidental and labour charges ,transporting concrete using
transit mixer, lifting concrete mechnically, laying concrete using
concrete pump, vibrating, curing , overheads & contractors profit
etc., complete but excluding cost of steel and its fabrication
charges for finished item of work (APSS No. 402)
Lintels
Fourth Floor :
1 Supply and placing of the Design Mix Concrete M 30 grade Supply and placing of the Design Supply and placing of the Design Mix
corresponding to IS 456 with minimum cement content of 400 Mix Concrete M 30 grade Concrete M 30 grade
kgs per 1 cum of concrete using batching and mixing plant of
15 cum per hour capacity with 20mm size graded machine
crushed hard granite metal (coarse aggregate - as per IS 383 -
1970 and IS 2386 Part 1 to Part 8) from approved quarry
including cost and conveyance of all materials like cement, fine
aggregate (sand) coarse aggregate, water etc., to site,
centering using casurina ballies, bamboos, wooden reapers,
runners, wood posts, wall plates etc., including all operational,
incidental and labour charges ,transporting concrete using
transit mixer, lifting concrete mechnically, laying concrete using
concrete pump, vibrating, curing , overheads & contractors profit
etc., complete but excluding cost of steel and its fabrication
charges for finished item of work (APSS No. 402)
Lintels
Fifth Floor :
810 Supply and placing of the Design Mix Concrete M 30 grade Supply and placing of the Design Supply and placing of the Design Mix
corresponding to IS 456 with minimum cement content of 400 Mix Concrete M 30 grade Concrete M 30 grade
kgs per 1 cum of concrete using batching and mixing plant of
15 cum per hour capacity with 20mm size graded machine
crushed hard granite metal (coarse aggregate - as per IS 383 -
1970 and IS 2386 Part 1 to Part 8) from approved quarry
including cost and conveyance of all materials like cement, fine
aggregate (sand) coarse aggregate, water etc., to site,
centering using casurina ballies, bamboos, wooden reapers,
runners, wood posts, wall plates etc., including all operational,
incidental and labour charges ,transporting concrete using
transit mixer, lifting concrete mechnically, laying concrete using
concrete pump, vibrating, curing , overheads & contractors profit
etc., complete but excluding cost of steel and its fabrication
charges for finished item of work (APSS No. 402)
100mm thick Drain side walls
Second Floor :
1 Supply and placing of the Design Mix Concrete M 30 grade Supply and placing of the Design Supply and placing of the Design Mix
corresponding to IS 456 with minimum cement content of 400 Mix Concrete M 30 grade Concrete M 30 grade
kgs per 1 cum of concrete using batching and mixing plant of
15 cum per hour capacity with 20mm size graded machine
crushed hard granite metal (coarse aggregate - as per IS 383 -
1970 and IS 2386 Part 1 to Part 8) from approved quarry
including cost and conveyance of all materials like cement, fine
aggregate (sand) coarse aggregate, water etc., to site,
centering using casurina ballies, bamboos, wooden reapers,
runners, wood posts, wall plates etc., including all operational,
incidental and labour charges ,transporting concrete using
transit mixer, lifting concrete mechnically, laying concrete using
concrete pump, vibrating, curing , overheads & contractors profit
etc., complete but excluding cost of steel and its fabrication
charges for finished item of work (APSS No. 402)
150mm thick Sump side walls
First Floor :
208 Supply and placing of the Design Mix Concrete M 30 grade Supply and placing of the Design Supply and placing of the Design Mix
corresponding to IS 456 with minimum cement content of 400 Mix Concrete M 30 grade Concrete M 30 grade
kgs per 1 cum of concrete using batching and mixing plant of
15 cum per hour capacity with 20mm size graded machine
crushed hard granite metal (coarse aggregate - as per IS 383 -
1970 and IS 2386 Part 1 to Part 8) from approved quarry
including cost and conveyance of all materials like cement, fine
aggregate (sand) coarse aggregate, water etc., to site,
centering using casurina ballies, bamboos, wooden reapers,
runners, wood posts, wall plates etc., including all operational,
incidental and labour charges ,transporting concrete using
transit mixer, lifting concrete mechnically, laying concrete using
concrete pump, vibrating, curing , overheads & contractors profit
etc., complete but excluding cost of steel and its fabrication
charges for finished item of work (APSS No. 402)
150mm thick Water Tank side walls
Fifth Floor :
1098 Supply and placing of the Design Mix Concrete M 30 grade Supply and placing of the Design Supply and placing of the Design Mix
corresponding to IS 456 with minimum cement content of 400 Mix Concrete M 30 grade Concrete M 30 grade
kgs per 1 cum of concrete using batching and mixing plant of
15 cum per hour capacity with 20mm size graded machine
crushed hard granite metal (coarse aggregate - as per IS 383 -
1970 and IS 2386 Part 1 to Part 8) from approved quarry
including cost and conveyance of all materials like cement, fine
aggregate (sand) coarse aggregate, water etc., to site,
centering using casurina ballies, bamboos, wooden reapers,
runners, wood posts, wall plates etc., including all operational,
incidental and labour charges ,transporting concrete using
transit mixer, lifting concrete mechnically, laying concrete using
concrete pump, vibrating, curing , overheads & contractors profit
etc., complete but excluding cost of steel and its fabrication
charges for finished item of work (APSS No. 402) 230mm thick
Retaining wall
Cellar :
1187 Supply and placing of the Design Mix Concrete M 30 grade Supply and placing of the Design Supply and placing of the Design Mix
corresponding to IS 456 with minimum cement content of 400 Mix Concrete M 30 grade Concrete M 30 grade
kgs per 1 cum of concrete using batching and mixing plant of
15 cum per hour capacity with 20mm size graded machine
crushed hard granite metal (coarse aggregate - as per IS 383 -
1970 and IS 2386 Part 1 to Part 8) from approved quarry
including cost and conveyance of all materials like cement, fine
aggregate (sand) coarse aggregate, water etc., to site,
centering using casurina ballies, bamboos, wooden reapers,
runners, wood posts, wall plates etc., including all operational,
incidental and labour charges ,transporting concrete using
transit mixer, lifting concrete mechnically, laying concrete using
concrete pump, vibrating, curing , overheads & contractors profit
etc., complete but excluding cost of steel and its fabrication
charges for finished item of work (APSS No. 402) 230mm thick
Retaining wall
Basement Floor
46 Supply and placing of the Design Mix Concrete M 30 grade Supply and placing of the Design Supply and placing of the Design Mix
corresponding to IS 456 with minimum cement content of 400 Mix Concrete M 30 grade Concrete M 30 grade
kgs per 1 cum of concrete using batching and mixing plant of
15 cum per hour capacity with 20mm size graded machine
crushed hard granite metal (coarse aggregate - as per IS 383 -
1970 and IS 2386 Part 1 to Part 8) from approved quarry
including cost and conveyance of all materials like cement, fine
aggregate (sand) coarse aggregate, water etc., to site,
centering using casurina ballies, bamboos, wooden reapers,
runners, wood posts, wall plates etc., including all operational,
incidental and labour charges ,transporting concrete using
transit mixer, lifting concrete mechnically, laying concrete using
concrete pump, vibrating, curing , overheads & contractors profit
etc., complete but excluding cost of steel and its fabrication
charges for finished item of work (APSS No. 402)
300mm thick STP Side walls
First Floor :
326 Supply and placing of the Design Mix Concrete M 30 grade Supply and placing of the Design Supply and placing of the Design Mix
corresponding to IS 456 with minimum cement content of 400 Mix Concrete M 30 grade Concrete M 30 grade
kgs per 1 cum of concrete using batching and mixing plant of
15 cum per hour capacity with 20mm size graded machine
crushed hard granite metal (coarse aggregate - as per IS 383 -
1970 and IS 2386 Part 1 to Part 8) from approved quarry
including cost and conveyance of all materials like cement, fine
aggregate (sand) coarse aggregate, water etc., to site,
centering using casurina ballies, bamboos, wooden reapers,
runners, wood posts, wall plates etc., including all operational,
incidental and labour charges ,transporting concrete using
transit mixer, lifting concrete mechnically, laying concrete using
concrete pump, vibrating, curing , overheads & contractors profit
etc., complete but excluding cost of steel and its fabrication
charges for finished item of work (APSS No. 402)
450mm thick STP/Sump side walls
First Floor :
98 Supply and placing of the Design Mix Concrete M 30 grade Supply and placing of the Design Supply and placing of the Design Mix
corresponding to IS 456 with minimum cement content of 400 Mix Concrete M 30 grade Concrete M 30 grade
kgs per 1 cum of concrete using batching and mixing plant of
15 cum per hour capacity with 20mm size graded machine
crushed hard granite metal (coarse aggregate - as per IS 383 -
1970 and IS 2386 Part 1 to Part 8) from approved quarry
including cost and conveyance of all materials like cement, fine
aggregate (sand) coarse aggregate, water etc., to site,
centering using casurina ballies, bamboos, wooden reapers,
runners, wood posts, wall plates etc., including all operational,
incidental and labour charges ,transporting concrete using
transit mixer, lifting concrete mechnically, laying concrete using
concrete pump, vibrating, curing , overheads & contractors profit
etc., complete but excluding cost of steel and its fabrication
charges for finished item of work (APSS No. 402)
Roof Beams : un supported height up to 3.66 m
Cellar :
161 Supply and placing of the Design Mix Concrete M 30 grade Supply and placing of the Design Supply and placing of the Design Mix
corresponding to IS 456 with minimum cement content of 400 Mix Concrete M 30 grade Concrete M 30 grade
kgs per 1 cum of concrete using batching and mixing plant of
15 cum per hour capacity with 20mm size graded machine
crushed hard granite metal (coarse aggregate - as per IS 383 -
1970 and IS 2386 Part 1 to Part 8) from approved quarry
including cost and conveyance of all materials like cement, fine
aggregate (sand) coarse aggregate, water etc., to site,
centering using casurina ballies, bamboos, wooden reapers,
runners, wood posts, wall plates etc., including all operational,
incidental and labour charges ,transporting concrete using
transit mixer, lifting concrete mechnically, laying concrete using
concrete pump, vibrating, curing , overheads & contractors profit
etc., complete but excluding cost of steel and its fabrication
charges for finished item of work (APSS No. 402)
Roof Beams : un supported height up to 3.66 m
Basement Floor
173.5 Supply and placing of the Design Mix Concrete M 30 grade Supply and placing of the Design Supply and placing of the Design Mix
corresponding to IS 456 with minimum cement content of 400 Mix Concrete M 30 grade Concrete M 30 grade
kgs per 1 cum of concrete using batching and mixing plant of
15 cum per hour capacity with 20mm size graded machine
crushed hard granite metal (coarse aggregate - as per IS 383 -
1970 and IS 2386 Part 1 to Part 8) from approved quarry
including cost and conveyance of all materials like cement, fine
aggregate (sand) coarse aggregate, water etc., to site,
centering using casurina ballies, bamboos, wooden reapers,
runners, wood posts, wall plates etc., including all operational,
incidental and labour charges ,transporting concrete using
transit mixer, lifting concrete mechnically, laying concrete using
concrete pump, vibrating, curing , overheads & contractors profit
etc., complete but excluding cost of steel and its fabrication
charges for finished item of work (APSS No. 402)
Roof Beams : un supported height up to 3.66 m
First Floor :
161 Supply and placing of the Design Mix Concrete M 30 grade Supply and placing of the Design Supply and placing of the Design Mix
corresponding to IS 456 with minimum cement content of 400 Mix Concrete M 30 grade Concrete M 30 grade
kgs per 1 cum of concrete using batching and mixing plant of
15 cum per hour capacity with 20mm size graded machine
crushed hard granite metal (coarse aggregate - as per IS 383 -
1970 and IS 2386 Part 1 to Part 8) from approved quarry
including cost and conveyance of all materials like cement, fine
aggregate (sand) coarse aggregate, water etc., to site,
centering using casurina ballies, bamboos, wooden reapers,
runners, wood posts, wall plates etc., including all operational,
incidental and labour charges ,transporting concrete using
transit mixer, lifting concrete mechnically, laying concrete using
concrete pump, vibrating, curing , overheads & contractors profit
etc., complete but excluding cost of steel and its fabrication
charges for finished item of work (APSS No. 402)
Roof Beams : un supported height up to 3.66 m
Second Floor :
161 Supply and placing of the Design Mix Concrete M 30 grade Supply and placing of the Design Supply and placing of the Design Mix
corresponding to IS 456 with minimum cement content of 400 Mix Concrete M 30 grade Concrete M 30 grade
kgs per 1 cum of concrete using batching and mixing plant of
15 cum per hour capacity with 20mm size graded machine
crushed hard granite metal (coarse aggregate - as per IS 383 -
1970 and IS 2386 Part 1 to Part 8) from approved quarry
including cost and conveyance of all materials like cement, fine
aggregate (sand) coarse aggregate, water etc., to site,
centering using casurina ballies, bamboos, wooden reapers,
runners, wood posts, wall plates etc., including all operational,
incidental and labour charges ,transporting concrete using
transit mixer, lifting concrete mechnically, laying concrete using
concrete pump, vibrating, curing , overheads & contractors profit
etc., complete but excluding cost of steel and its fabrication
charges for finished item of work (APSS No. 402)
Roof Beams : un supported height up to 3.66 m
Fourth Floor :
17 Supply and placing of the Design Mix Concrete M 30 grade Supply and placing of the Design Supply and placing of the Design Mix
corresponding to IS 456 with minimum cement content of 400 Mix Concrete M 30 grade Concrete M 30 grade
kgs per 1 cum of concrete using batching and mixing plant of
15 cum per hour capacity with 20mm size graded machine
crushed hard granite metal (coarse aggregate - as per IS 383 -
1970 and IS 2386 Part 1 to Part 8) from approved quarry
including cost and conveyance of all materials like cement, fine
aggregate (sand) coarse aggregate, water etc., to site,
centering using casurina ballies, bamboos, wooden reapers,
runners, wood posts, wall plates etc., including all operational,
incidental and labour charges ,transporting concrete using
transit mixer, lifting concrete mechnically, laying concrete using
concrete pump, vibrating, curing , overheads & contractors profit
etc., complete but excluding cost of steel and its fabrication
charges for finished item of work (APSS No. 402)
Roof Beams : un supported height up to 3.66 m
Fifth Floor :
283 Supply and placing of the Design Mix Concrete M 30 grade Supply and placing of the Design Supply and placing of the Design Mix
corresponding to IS 456 with minimum cement content of 400 Mix Concrete M 30 grade Concrete M 30 grade
kgs per 1 cum of concrete using batching and mixing plant of
15 cum per hour capacity with 20mm size graded machine
crushed hard granite metal (coarse aggregate - as per IS 383 -
1970 and IS 2386 Part 1 to Part 8) from approved quarry
including cost and conveyance of all materials like cement, fine
aggregate (sand) coarse aggregate, water etc., to site,
centering using casurina ballies, bamboos, wooden reapers,
runners, wood posts, wall plates etc., including all operational,
incidental and labour charges ,transporting concrete using
transit mixer, lifting concrete mechnically, laying concrete using
concrete pump, vibrating, curing , overheads & contractors profit
etc., complete but excluding cost of steel and its fabrication
charges for finished item of work (APSS No. 402)
Roof Slabs : un supported height up to 3.66 m
Roof Slabs 125mm thick :
Cellar :
283 Supply and placing of the Design Mix Concrete M 30 grade Supply and placing of the Design Supply and placing of the Design Mix
corresponding to IS 456 with minimum cement content of 400 Mix Concrete M 30 grade Concrete M 30 grade
kgs per 1 cum of concrete using batching and mixing plant of
15 cum per hour capacity with 20mm size graded machine
crushed hard granite metal (coarse aggregate - as per IS 383 -
1970 and IS 2386 Part 1 to Part 8) from approved quarry
including cost and conveyance of all materials like cement, fine
aggregate (sand) coarse aggregate, water etc., to site,
centering using casurina ballies, bamboos, wooden reapers,
runners, wood posts, wall plates etc., including all operational,
incidental and labour charges ,transporting concrete using
transit mixer, lifting concrete mechnically, laying concrete using
concrete pump, vibrating, curing , overheads & contractors profit
etc., complete but excluding cost of steel and its fabrication
charges for finished item of work (APSS No. 402)
Roof Slabs : un supported height up to 3.66 m
Roof Slabs 125mm thick :
Basement Floor
339 Supply and placing of the Design Mix Concrete M 30 grade Supply and placing of the Design Supply and placing of the Design Mix
corresponding to IS 456 with minimum cement content of 400 Mix Concrete M 30 grade Concrete M 30 grade
kgs per 1 cum of concrete using batching and mixing plant of
15 cum per hour capacity with 20mm size graded machine
crushed hard granite metal (coarse aggregate - as per IS 383 -
1970 and IS 2386 Part 1 to Part 8) from approved quarry
including cost and conveyance of all materials like cement, fine
aggregate (sand) coarse aggregate, water etc., to site,
centering using casurina ballies, bamboos, wooden reapers,
runners, wood posts, wall plates etc., including all operational,
incidental and labour charges ,transporting concrete using
transit mixer, lifting concrete mechnically, laying concrete using
concrete pump, vibrating, curing , overheads & contractors profit
etc., complete but excluding cost of steel and its fabrication
charges for finished item of work (APSS No. 402)
Roof Slabs : un supported height up to 3.66 m
Roof Slabs 125mm thick :
First Floor :
284 Supply and placing of the Design Mix Concrete M 30 grade Supply and placing of the Design Supply and placing of the Design Mix
corresponding to IS 456 with minimum cement content of 400 Mix Concrete M 30 grade Concrete M 30 grade
kgs per 1 cum of concrete using batching and mixing plant of
15 cum per hour capacity with 20mm size graded machine
crushed hard granite metal (coarse aggregate - as per IS 383 -
1970 and IS 2386 Part 1 to Part 8) from approved quarry
including cost and conveyance of all materials like cement, fine
aggregate (sand) coarse aggregate, water etc., to site,
centering using casurina ballies, bamboos, wooden reapers,
runners, wood posts, wall plates etc., including all operational,
incidental and labour charges ,transporting concrete using
transit mixer, lifting concrete mechnically, laying concrete using
concrete pump, vibrating, curing , overheads & contractors profit
etc., complete but excluding cost of steel and its fabrication
charges for finished item of work (APSS No. 402)
Roof Slabs : un supported height up to 3.66 m
Roof Slabs 125mm thick :
Second Floor :
283 Supply and placing of the Design Mix Concrete M 30 grade Supply and placing of the Design Supply and placing of the Design Mix
corresponding to IS 456 with minimum cement content of 400 Mix Concrete M 30 grade Concrete M 30 grade
kgs per 1 cum of concrete using batching and mixing plant of
15 cum per hour capacity with 20mm size graded machine
crushed hard granite metal (coarse aggregate - as per IS 383 -
1970 and IS 2386 Part 1 to Part 8) from approved quarry
including cost and conveyance of all materials like cement, fine
aggregate (sand) coarse aggregate, water etc., to site,
centering using casurina ballies, bamboos, wooden reapers,
runners, wood posts, wall plates etc., including all operational,
incidental and labour charges ,transporting concrete using
transit mixer, lifting concrete mechnically, laying concrete using
concrete pump, vibrating, curing , overheads & contractors profit
etc., complete but excluding cost of steel and its fabrication
charges for finished item of work (APSS No. 402)
Roof Slabs : un supported height up to 3.66 m
Roof Slabs 125mm thick :
Fourth Floor :
181 Supply and placing of the Design Mix Concrete M 30 grade Supply and placing of the Design Supply and placing of the Design Mix
corresponding to IS 456 with minimum cement content of 400 Mix Concrete M 30 grade Concrete M 30 grade
kgs per 1 cum of concrete using batching and mixing plant of
15 cum per hour capacity with 20mm size graded machine
crushed hard granite metal (coarse aggregate - as per IS 383 -
1970 and IS 2386 Part 1 to Part 8) from approved quarry
including cost and conveyance of all materials like cement, fine
aggregate (sand) coarse aggregate, water etc., to site,
centering using casurina ballies, bamboos, wooden reapers,
runners, wood posts, wall plates etc., including all operational,
incidental and labour charges ,transporting concrete using
transit mixer, lifting concrete mechnically, laying concrete using
concrete pump, vibrating, curing , overheads & contractors profit
etc., complete but excluding cost of steel and its fabrication
charges for finished item of work (APSS No. 402)
Roof Slabs : un supported height up to 3.66 m
Roof Slabs 125mm thick :
Fifth Floor :
762 Supply and placing of the Design Mix Concrete M 30 grade Supply and placing of the Design Supply and placing of the Design Mix
corresponding to IS 456 with minimum cement content of 400 Mix Concrete M 30 grade Concrete M 30 grade
kgs per 1 cum of concrete using batching and mixing plant of
15 cum per hour capacity with 20mm size graded machine
crushed hard granite metal (coarse aggregate - as per IS 383 -
1970 and IS 2386 Part 1 to Part 8) from approved quarry
including cost and conveyance of all materials like cement, fine
aggregate (sand) coarse aggregate, water etc., to site,
centering using casurina ballies, bamboos, wooden reapers,
runners, wood posts, wall plates etc., including all operational,
incidental and labour charges ,transporting concrete using
transit mixer, lifting concrete mechnically, laying concrete using
concrete pump, vibrating, curing , overheads & contractors profit
etc., complete but excluding cost of steel and its fabrication
charges for finished item of work (APSS No. 402)
Roof Slabs : un supported height up to 3.66 m
Roof Slabs 150mm thick :
Cellar :
1786 Supply and placing of the Design Mix Concrete M 30 grade Supply and placing of the Design Supply and placing of the Design Mix
corresponding to IS 456 with minimum cement content of 400 Mix Concrete M 30 grade Concrete M 30 grade
kgs per 1 cum of concrete using batching and mixing plant of
15 cum per hour capacity with 20mm size graded machine
crushed hard granite metal (coarse aggregate - as per IS 383 -
1970 and IS 2386 Part 1 to Part 8) from approved quarry
including cost and conveyance of all materials like cement, fine
aggregate (sand) coarse aggregate, water etc., to site,
centering using casurina ballies, bamboos, wooden reapers,
runners, wood posts, wall plates etc., including all operational,
incidental and labour charges ,transporting concrete using
transit mixer, lifting concrete mechnically, laying concrete using
concrete pump, vibrating, curing , overheads & contractors profit
etc., complete but excluding cost of steel and its fabrication
charges for finished item of work (APSS No. 402)
Roof Slabs : un supported height up to 3.66 m
Roof Slabs 150mm thick :
Basement Floor
2005 Supply and placing of the Design Mix Concrete M 30 grade Supply and placing of the Design Supply and placing of the Design Mix
corresponding to IS 456 with minimum cement content of 400 Mix Concrete M 30 grade Concrete M 30 grade
kgs per 1 cum of concrete using batching and mixing plant of
15 cum per hour capacity with 20mm size graded machine
crushed hard granite metal (coarse aggregate - as per IS 383 -
1970 and IS 2386 Part 1 to Part 8) from approved quarry
including cost and conveyance of all materials like cement, fine
aggregate (sand) coarse aggregate, water etc., to site,
centering using casurina ballies, bamboos, wooden reapers,
runners, wood posts, wall plates etc., including all operational,
incidental and labour charges ,transporting concrete using
transit mixer, lifting concrete mechnically, laying concrete using
concrete pump, vibrating, curing , overheads & contractors profit
etc., complete but excluding cost of steel and its fabrication
charges for finished item of work (APSS No. 402)
Roof Slabs : un supported height up to 3.66 m
Roof Slabs 150mm thick :
First Floor :
1643 Supply and placing of the Design Mix Concrete M 30 grade Supply and placing of the Design Supply and placing of the Design Mix
corresponding to IS 456 with minimum cement content of 400 Mix Concrete M 30 grade Concrete M 30 grade
kgs per 1 cum of concrete using batching and mixing plant of
15 cum per hour capacity with 20mm size graded machine
crushed hard granite metal (coarse aggregate - as per IS 383 -
1970 and IS 2386 Part 1 to Part 8) from approved quarry
including cost and conveyance of all materials like cement, fine
aggregate (sand) coarse aggregate, water etc., to site,
centering using casurina ballies, bamboos, wooden reapers,
runners, wood posts, wall plates etc., including all operational,
incidental and labour charges ,transporting concrete using
transit mixer, lifting concrete mechnically, laying concrete using
concrete pump, vibrating, curing , overheads & contractors profit
etc., complete but excluding cost of steel and its fabrication
charges for finished item of work (APSS No. 402)
Roof Slabs : un supported height up to 3.66 m
Roof Slabs 150mm thick :
Second Floor :
1647 Supply and placing of the Design Mix Concrete M 30 grade Supply and placing of the Design Supply and placing of the Design Mix
corresponding to IS 456 with minimum cement content of 400 Mix Concrete M 30 grade Concrete M 30 grade
kgs per 1 cum of concrete using batching and mixing plant of
15 cum per hour capacity with 20mm size graded machine
crushed hard granite metal (coarse aggregate - as per IS 383 -
1970 and IS 2386 Part 1 to Part 8) from approved quarry
including cost and conveyance of all materials like cement, fine
aggregate (sand) coarse aggregate, water etc., to site,
centering using casurina ballies, bamboos, wooden reapers,
runners, wood posts, wall plates etc., including all operational,
incidental and labour charges ,transporting concrete using
transit mixer, lifting concrete mechnically, laying concrete using
concrete pump, vibrating, curing , overheads & contractors profit
etc., complete but excluding cost of steel and its fabrication
charges for finished item of work (APSS No. 402)
Roof Slabs : un supported height up to 3.66 m
Roof Slabs 150mm thick :
Fourth Floor :
195 Supply and placing of the Design Mix Concrete M 30 grade Supply and placing of the Design Supply and placing of the Design Mix
corresponding to IS 456 with minimum cement content of 400 Mix Concrete M 30 grade Concrete M 30 grade
kgs per 1 cum of concrete using batching and mixing plant of
15 cum per hour capacity with 20mm size graded machine
crushed hard granite metal (coarse aggregate - as per IS 383 -
1970 and IS 2386 Part 1 to Part 8) from approved quarry
including cost and conveyance of all materials like cement, fine
aggregate (sand) coarse aggregate, water etc., to site,
centering using casurina ballies, bamboos, wooden reapers,
runners, wood posts, wall plates etc., including all operational,
incidental and labour charges ,transporting concrete using
transit mixer, lifting concrete mechnically, laying concrete using
concrete pump, vibrating, curing , overheads & contractors profit
etc., complete but excluding cost of steel and its fabrication
charges for finished item of work (APSS No. 402)
Roof Slabs : un supported height up to 3.66 m
Roof Slabs 150mm thick :
Fifth Floor :
831 Supply and placing of the Design Mix Concrete M 30 grade Supply and placing of the Design Supply and placing of the Design Mix
corresponding to IS 456 with minimum cement content of 400 Mix Concrete M 30 grade Concrete M 30 grade
kgs per 1 cum of concrete using batching and mixing plant of
15 cum per hour capacity with 20mm size graded machine
crushed hard granite metal (coarse aggregate - as per IS 383 -
1970 and IS 2386 Part 1 to Part 8) from approved quarry
including cost and conveyance of all materials like cement, fine
aggregate (sand) coarse aggregate, water etc., to site,
centering using casurina ballies, bamboos, wooden reapers,
runners, wood posts, wall plates etc., including all operational,
incidental and labour charges ,transporting concrete using
transit mixer, lifting concrete mechnically, laying concrete using
concrete pump, vibrating, curing , overheads & contractors profit
etc., complete but excluding cost of steel and its fabrication
charges for finished item of work (APSS No. 402)
Roof Slabs : un supported height up to 3.66 m
Roof Slabs 175mm thick :
Cellar :
1170 Supply and placing of the Design Mix Concrete M 30 grade Supply and placing of the Design Supply and placing of the Design Mix
corresponding to IS 456 with minimum cement content of 400 Mix Concrete M 30 grade Concrete M 30 grade
kgs per 1 cum of concrete using batching and mixing plant of
15 cum per hour capacity with 20mm size graded machine
crushed hard granite metal (coarse aggregate - as per IS 383 -
1970 and IS 2386 Part 1 to Part 8) from approved quarry
including cost and conveyance of all materials like cement, fine
aggregate (sand) coarse aggregate, water etc., to site,
centering using casurina ballies, bamboos, wooden reapers,
runners, wood posts, wall plates etc., including all operational,
incidental and labour charges ,transporting concrete using
transit mixer, lifting concrete mechnically, laying concrete using
concrete pump, vibrating, curing , overheads & contractors profit
etc., complete but excluding cost of steel and its fabrication
charges for finished item of work (APSS No. 402)
Roof Slabs : un supported height up to 3.66 m
Roof Slabs 175mm thick :
Basement Floor
1210 Supply and placing of the Design Mix Concrete M 30 grade Supply and placing of the Design Supply and placing of the Design Mix
corresponding to IS 456 with minimum cement content of 400 Mix Concrete M 30 grade Concrete M 30 grade
kgs per 1 cum of concrete using batching and mixing plant of
15 cum per hour capacity with 20mm size graded machine
crushed hard granite metal (coarse aggregate - as per IS 383 -
1970 and IS 2386 Part 1 to Part 8) from approved quarry
including cost and conveyance of all materials like cement, fine
aggregate (sand) coarse aggregate, water etc., to site,
centering using casurina ballies, bamboos, wooden reapers,
runners, wood posts, wall plates etc., including all operational,
incidental and labour charges ,transporting concrete using
transit mixer, lifting concrete mechnically, laying concrete using
concrete pump, vibrating, curing , overheads & contractors profit
etc., complete but excluding cost of steel and its fabrication
charges for finished item of work (APSS No. 402)
Roof Slabs : un supported height up to 3.66 m
Roof Slabs 175mm thick :
First Floor :
1192 Supply and placing of the Design Mix Concrete M 30 grade Supply and placing of the Design Supply and placing of the Design Mix
corresponding to IS 456 with minimum cement content of 400 Mix Concrete M 30 grade Concrete M 30 grade
kgs per 1 cum of concrete using batching and mixing plant of
15 cum per hour capacity with 20mm size graded machine
crushed hard granite metal (coarse aggregate - as per IS 383 -
1970 and IS 2386 Part 1 to Part 8) from approved quarry
including cost and conveyance of all materials like cement, fine
aggregate (sand) coarse aggregate, water etc., to site,
centering using casurina ballies, bamboos, wooden reapers,
runners, wood posts, wall plates etc., including all operational,
incidental and labour charges ,transporting concrete using
transit mixer, lifting concrete mechnically, laying concrete using
concrete pump, vibrating, curing , overheads & contractors profit
etc., complete but excluding cost of steel and its fabrication
charges for finished item of work (APSS No. 402)
Roof Slabs : un supported height up to 3.66 m
Roof Slabs 175mm thick :
Second Floor :
1170 Supply and placing of the Design Mix Concrete M 30 grade Supply and placing of the Design Supply and placing of the Design Mix
corresponding to IS 456 with minimum cement content of 400 Mix Concrete M 30 grade Concrete M 30 grade
kgs per 1 cum of concrete using batching and mixing plant of
15 cum per hour capacity with 20mm size graded machine
crushed hard granite metal (coarse aggregate - as per IS 383 -
1970 and IS 2386 Part 1 to Part 8) from approved quarry
including cost and conveyance of all materials like cement, fine
aggregate (sand) coarse aggregate, water etc., to site,
centering using casurina ballies, bamboos, wooden reapers,
runners, wood posts, wall plates etc., including all operational,
incidental and labour charges ,transporting concrete using
transit mixer, lifting concrete mechnically, laying concrete using
concrete pump, vibrating, curing , overheads & contractors profit
etc., complete but excluding cost of steel and its fabrication
charges for finished item of work (APSS No. 402)
Roof Slabs : un supported height up to 3.66 m
Roof Slabs 175mm thick :
Fourth Floor :
585 Reinforced Cement Concrete M 20 nominal mix using 12mm Supply and placing of the Design Supply and placing of the Design Mix
size hard granite machine crushed graded metal (coarse Mix Concrete M 30 grade Concrete M 30 grade
aggregate - as per IS 383 - 1970 and IS 2386 Part 1 to Part 8)
from approved quarry, using a minimum quantity of 350 kgs. of
cement per 1 cum of concrete using concrete Mixer 10 / 7 cft
(0.2 / 0.8 cum) capacity including cost and conveyance of all
materials like cement, fine aggregate (Sand), coarse
aggregate, water etc., to site including centering, shuttering,
labour charges such as weigh batching, machine mixing, hire
charges of concrete mixer, laying concrete, lift charges, curing
etc., and overheads & contractors profit complete for finished
item of work (APSS No. 402 & 403) for 100mm thick precast
slabs
100mm thich Precast Slab
Second Floor :
251 Supply and placing of the Design Mix Concrete M 30 grade Supply and placing of the Design Supply and placing of the Design Mix
corresponding to IS 456 with minimum cement content of 400 Mix Concrete M 30 grade Concrete M 30 grade
kgs per 1 cum of concrete using batching and mixing plant of 15
cum per hour capacity with 20mm size graded machine crushed
hard granite metal (coarse aggregate - as per IS 383 - 1970 and
IS 2386 Part 1 to Part 8) from approved quarry including cost
and conveyance of all materials like cement, fine aggregate
(sand) coarse aggregate, water etc., to site, centering using
steel scaffolding pipes , jack props , wallers , foot plates ,
brackets , steel centering plates etc.,including all operational,
incidental and labour charges ,transporting concrete using
transit mixer, lifting concrete mechnically, laying concrete using
concrete pump, vibrating, curing , overheads & contractors profit
etc., complete but excluding cost of steel and its fabrication
charges for finished item of work (APSS No. 402)
Columns :
un supported height up to 4.27 m
Third Floor :
161 Supply and placing of the Design Mix Concrete M 30 grade Supply and placing of the Design Supply and placing of the Design Mix
corresponding to IS 456 with minimum cement content of 400 Mix Concrete M 30 grade Concrete M 30 grade
kgs per 1 cum of concrete using batching and mixing plant of 15
cum per hour capacity with 20mm size graded machine crushed
hard granite metal (coarse aggregate - as per IS 383 - 1970 and
IS 2386 Part 1 to Part 8) from approved quarry including cost
and conveyance of all materials like cement, fine aggregate
(sand) coarse aggregate, water etc., to site, centering using
steel scaffolding pipes , jack props , wallers , foot plates ,
brackets , steel centering plates etc.,including all operational,
incidental and labour charges ,transporting concrete using
transit mixer, lifting concrete mechnically, laying concrete using
concrete pump, vibrating, curing , overheads & contractors profit
etc., complete but excluding cost of steel and its fabrication
charges for finished item of work (APSS No. 402)
Roof Beams
un supported height up to 4.27 m
Third Floor :
283 Supply and placing of the Design Mix Concrete M 30 grade Supply and placing of the Design Supply and placing of the Design Mix
corresponding to IS 456 with minimum cement content of 400 Mix Concrete M 30 grade Concrete M 30 grade
kgs per 1 cum of concrete using batching and mixing plant of 15
cum per hour capacity with 20mm size graded machine crushed
hard granite metal (coarse aggregate - as per IS 383 - 1970 and
IS 2386 Part 1 to Part 8) from approved quarry including cost
and conveyance of all materials like cement, fine aggregate
(sand) coarse aggregate, water etc., to site, centering using
steel scaffolding pipes , jack props , wallers , foot plates ,
brackets , steel centering plates etc.,including all operational,
incidental and labour charges ,transporting concrete using
transit mixer, lifting concrete mechnically, laying concrete using
concrete pump, vibrating, curing , overheads & contractors profit
etc., complete but excluding cost of steel and its fabrication
charges for finished item of work (APSS No. 402)
Roof Slab 125mm thick
un supported height up to 4.27 m
Third Floor :
1647 Supply and placing of the Design Mix Concrete M 30 grade Supply and placing of the Design Supply and placing of the Design Mix
corresponding to IS 456 with minimum cement content of 400 Mix Concrete M 30 grade Concrete M 30 grade
kgs per 1 cum of concrete using batching and mixing plant of 15
cum per hour capacity with 20mm size graded machine crushed
hard granite metal (coarse aggregate - as per IS 383 - 1970 and
IS 2386 Part 1 to Part 8) from approved quarry including cost
and conveyance of all materials like cement, fine aggregate
(sand) coarse aggregate, water etc., to site, centering using
steel scaffolding pipes , jack props , wallers , foot plates ,
brackets , steel centering plates etc.,including all operational,
incidental and labour charges ,transporting concrete using
transit mixer, lifting concrete mechnically, laying concrete using
concrete pump, vibrating, curing , overheads & contractors profit
etc., complete but excluding cost of steel and its fabrication
charges for finished item of work (APSS No. 402)
Roof Slab 150mm thick
un supported height up to 4.27 m
Third Floor :
1170 Supply and placing of the Design Mix Concrete M 30 grade Supply and placing of the Design Supply and placing of the Design Mix
corresponding to IS 456 with minimum cement content of 400 Mix Concrete M 30 grade Concrete M 30 grade
kgs per 1 cum of concrete using batching and mixing plant of 15
cum per hour capacity with 20mm size graded machine crushed
hard granite metal (coarse aggregate - as per IS 383 - 1970 and
IS 2386 Part 1 to Part 8) from approved quarry including cost
and conveyance of all materials like cement, fine aggregate
(sand) coarse aggregate, water etc., to site, centering using
steel scaffolding pipes , jack props , wallers , foot plates ,
brackets , steel centering plates etc.,including all operational,
incidental and labour charges ,transporting concrete using
transit mixer, lifting concrete mechnically, laying concrete using
concrete pump, vibrating, curing , overheads & contractors profit
etc., complete but excluding cost of steel and its fabrication
charges for finished item of work (APSS No. 402)
Roof Slab 175mm thick
un supported height up to 4.27 m
Third Floor :
163 Supply and placing of the Design Mix Concrete M 30 grade Supply and placing of the Design Supply and placing of the Design Mix
corresponding to IS 456 with minimum cement content of 400 Mix Concrete M 30 grade Concrete M 30 grade
kgs per 1 cum of concrete using weigh batcher / mixer with
20mm size graded machine crushed hard granite metal (coarse
aggregate - as per IS 383 - 1970 and IS 2386 Part 1 to Part 8)
from approved quarry including cost and conveyance of all
materials like cement, fine aggregate (sand), coarse aggregate,
water etc., to site, centering using casurina ballies , bamboos ,
wooden reapers , runners , wood posts , wall plates etc., for
60cm wide sun-shades 7.5cm thick at fixed end and 5cm thick
at free end with an average thickness of 6.25cm including all
operational, incidental and labour charges such as weigh
batching, machine mixing, lifting of concrete manually, laying
concrete, curing, overheads & contractors profit complete etc.,
but excluding cost of steel and its fabrication charges for
finished item of work (APSS No. 402, 403 & 903)
Cellar :
318 Supply and placing of the Design Mix Concrete M 30 grade Supply and placing of the Design Supply and placing of the Design Mix
corresponding to IS 456 with minimum cement content of 400 Mix Concrete M 30 grade Concrete M 30 grade
kgs per 1 cum of concrete using weigh batcher / mixer with
20mm size graded machine crushed hard granite metal (coarse
aggregate - as per IS 383 - 1970 and IS 2386 Part 1 to Part 8)
from approved quarry including cost and conveyance of all
materials like cement, fine aggregate (sand), coarse aggregate,
water etc., to site, centering using casurina ballies , bamboos ,
wooden reapers , runners , wood posts , wall plates etc., for
60cm wide sun-shades 7.5cm thick at fixed end and 5cm thick
at free end with an average thickness of 6.25cm including all
operational, incidental and labour charges such as weigh
batching, machine mixing, lifting of concrete manually, laying
concrete, curing, overheads & contractors profit complete etc.,
but excluding cost of steel and its fabrication charges for
finished item of work (APSS No. 402, 403 & 903)
Basement Floor
154 Supply and placing of the Design Mix Concrete M 30 grade Supply and placing of the Design Supply and placing of the Design Mix
corresponding to IS 456 with minimum cement content of 400 Mix Concrete M 30 grade Concrete M 30 grade
kgs per 1 cum of concrete using weigh batcher / mixer with
20mm size graded machine crushed hard granite metal (coarse
aggregate - as per IS 383 - 1970 and IS 2386 Part 1 to Part 8)
from approved quarry including cost and conveyance of all
materials like cement, fine aggregate (sand), coarse aggregate,
water etc., to site, centering using casurina ballies , bamboos ,
wooden reapers , runners , wood posts , wall plates etc., for
60cm wide sun-shades 7.5cm thick at fixed end and 5cm thick
at free end with an average thickness of 6.25cm including all
operational, incidental and labour charges such as weigh
batching, machine mixing, lifting of concrete manually, laying
concrete, curing, overheads & contractors profit complete etc.,
but excluding cost of steel and its fabrication charges for
finished item of work (APSS No. 402, 403 & 903)
First Floor :
231 Supply and placing of the Design Mix Concrete M 30 grade Supply and placing of the Design Supply and placing of the Design Mix
corresponding to IS 456 with minimum cement content of 400 Mix Concrete M 30 grade Concrete M 30 grade
kgs per 1 cum of concrete using weigh batcher / mixer with
20mm size graded machine crushed hard granite metal (coarse
aggregate - as per IS 383 - 1970 and IS 2386 Part 1 to Part 8)
from approved quarry including cost and conveyance of all
materials like cement, fine aggregate (sand), coarse aggregate,
water etc., to site, centering using casurina ballies , bamboos ,
wooden reapers , runners , wood posts , wall plates etc., for
60cm wide sun-shades 7.5cm thick at fixed end and 5cm thick
at free end with an average thickness of 6.25cm including all
operational, incidental and labour charges such as weigh
batching, machine mixing, lifting of concrete manually, laying
concrete, curing, overheads & contractors profit complete etc.,
but excluding cost of steel and its fabrication charges for
finished item of work (APSS No. 402, 403 & 903)
Second Floor :
102 Supply and placing of the Design Mix Concrete M 30 grade Supply and placing of the Design Supply and placing of the Design Mix
corresponding to IS 456 with minimum cement content of 400 Mix Concrete M 30 grade Concrete M 30 grade
kgs per 1 cum of concrete using weigh batcher / mixer with
20mm size graded machine crushed hard granite metal (coarse
aggregate - as per IS 383 - 1970 and IS 2386 Part 1 to Part 8)
from approved quarry including cost and conveyance of all
materials like cement, fine aggregate (sand), coarse aggregate,
water etc., to site, centering using casurina ballies , bamboos ,
wooden reapers , runners , wood posts , wall plates etc., for
60cm wide sun-shades 7.5cm thick at fixed end and 5cm thick
at free end with an average thickness of 6.25cm including all
operational, incidental and labour charges such as weigh
batching, machine mixing, lifting of concrete manually, laying
concrete, curing, overheads & contractors profit complete etc.,
but excluding cost of steel and its fabrication charges for
finished item of work (APSS No. 402, 403 & 903)
Third Floor :
221 Supply and placing of the Design Mix Concrete M 30 grade Supply and placing of the Design Supply and placing of the Design Mix
corresponding to IS 456 with minimum cement content of 400 Mix Concrete M 30 grade Concrete M 30 grade
kgs per 1 cum of concrete using weigh batcher / mixer with
20mm size graded machine crushed hard granite metal (coarse
aggregate - as per IS 383 - 1970 and IS 2386 Part 1 to Part 8)
from approved quarry including cost and conveyance of all
materials like cement, fine aggregate (sand), coarse aggregate,
water etc., to site, centering using casurina ballies , bamboos ,
wooden reapers , runners , wood posts , wall plates etc., for
60cm wide sun-shades 7.5cm thick at fixed end and 5cm thick
at free end with an average thickness of 6.25cm including all
operational, incidental and labour charges such as weigh
batching, machine mixing, lifting of concrete manually, laying
concrete, curing, overheads & contractors profit complete etc.,
but excluding cost of steel and its fabrication charges for
finished item of work (APSS No. 402, 403 & 903)
Fourth Floor :
9 Supply and placing of the Design Mix Concrete M 30 grade Supply and placing of the Design Supply and placing of the Design Mix
corresponding to IS 456 with minimum cement content of 400 Mix Concrete M 30 grade Concrete M 30 grade
kgs per 1 cum of concrete using weigh batcher / mixer with
20mm size graded machine crushed hard granite metal (coarse
aggregate - as per IS 383 - 1970 and IS 2386 Part 1 to Part 8)
from approved quarry including cost and conveyance of all
materials like cement, fine aggregate (sand), coarse aggregate,
water etc., to site, centering using casurina ballies , bamboos ,
wooden reapers , runners , wood posts , wall plates etc., for
60cm wide sun-shades 7.5cm thick at fixed end and 5cm thick
at free end with an average thickness of 6.25cm including all
operational, incidental and labour charges such as weigh
batching, machine mixing, lifting of concrete manually, laying
concrete, curing, overheads & contractors profit complete etc.,
but excluding cost of steel and its fabrication charges for
finished item of work (APSS No. 402, 403 & 903)
Fifth Floor :
19 Reinforced Cement Concrete M 20 nominal mix using 12mm Supply and placing of the Design Supply and placing of the Design Mix
size hard granite machine crushed graded metal (coarse Mix Concrete M 30 grade Concrete M 30 grade
aggregate - as per IS 383 - 1970 and IS 2386 Part 1 to Part 8)
from approved quarry, using a minimum quantity of 350 kgs. of
cement per 1 cum of concrete using concrete Mixer 10 / 7 cft
(0.2 / 0.8 cum) capacity including cost and conveyance of all
materials like cement, fine aggregate (Sand), coarse
aggregate, water etc., to site including centering, shuttering,
labour charges such as weigh batching, machine mixing, hire
charges of concrete mixer, laying concrete, lift charges, curing
etc., and overheads & contractors profit complete for finished
item of work (APSS No. 402 & 403) for platforms and shelves.
50mm thick platforms / lofts:
Cellar :
120 Reinforced Cement Concrete M 20 nominal mix using 12mm Supply and placing of the Design Supply and placing of the Design Mix
size hard granite machine crushed graded metal (coarse Mix Concrete M 30 grade Concrete M 30 grade
aggregate - as per IS 383 - 1970 and IS 2386 Part 1 to Part 8)
from approved quarry, using a minimum quantity of 350 kgs. of
cement per 1 cum of concrete using concrete Mixer 10 / 7 cft
(0.2 / 0.8 cum) capacity including cost and conveyance of all
materials like cement, fine aggregate (Sand), coarse
aggregate, water etc., to site including centering, shuttering,
labour charges such as weigh batching, machine mixing, hire
charges of concrete mixer, laying concrete, lift charges, curing
etc., and overheads & contractors profit complete for finished
item of work (APSS No. 402 & 403) for platforms and shelves.
50mm thick platforms / lofts:
Basement Floor
34 Reinforced Cement Concrete M 20 nominal mix using 12mm Supply and placing of the Design Supply and placing of the Design Mix
size hard granite machine crushed graded metal (coarse Mix Concrete M 30 grade Concrete M 30 grade
aggregate - as per IS 383 - 1970 and IS 2386 Part 1 to Part 8)
from approved quarry, using a minimum quantity of 350 kgs. of
cement per 1 cum of concrete using concrete Mixer 10 / 7 cft
(0.2 / 0.8 cum) capacity including cost and conveyance of all
materials like cement, fine aggregate (Sand), coarse
aggregate, water etc., to site including centering, shuttering,
labour charges such as weigh batching, machine mixing, hire
charges of concrete mixer, laying concrete, lift charges, curing
etc., and overheads & contractors profit complete for finished
item of work (APSS No. 402 & 403) for platforms and shelves.
50mm thick platforms / lofts:
First Floor :
39 Reinforced Cement Concrete M 20 nominal mix using 12mm Supply and placing of the Design Supply and placing of the Design Mix
size hard granite machine crushed graded metal (coarse Mix Concrete M 30 grade Concrete M 30 grade
aggregate - as per IS 383 - 1970 and IS 2386 Part 1 to Part 8)
from approved quarry, using a minimum quantity of 350 kgs. of
cement per 1 cum of concrete using concrete Mixer 10 / 7 cft
(0.2 / 0.8 cum) capacity including cost and conveyance of all
materials like cement, fine aggregate (Sand), coarse
aggregate, water etc., to site including centering, shuttering,
labour charges such as weigh batching, machine mixing, hire
charges of concrete mixer, laying concrete, lift charges, curing
etc., and overheads & contractors profit complete for finished
item of work (APSS No. 402 & 403) for platforms and shelves.
50mm thick platforms / lofts:
Second Floor :
29 Reinforced Cement Concrete M 20 nominal mix using 12mm Supply and placing of the Design Supply and placing of the Design Mix
size hard granite machine crushed graded metal (coarse Mix Concrete M 30 grade Concrete M 30 grade
aggregate - as per IS 383 - 1970 and IS 2386 Part 1 to Part 8)
from approved quarry, using a minimum quantity of 350 kgs. of
cement per 1 cum of concrete using concrete Mixer 10 / 7 cft
(0.2 / 0.8 cum) capacity including cost and conveyance of all
materials like cement, fine aggregate (Sand), coarse
aggregate, water etc., to site including centering, shuttering,
labour charges such as weigh batching, machine mixing, hire
charges of concrete mixer, laying concrete, lift charges, curing
etc., and overheads & contractors profit complete for finished
item of work (APSS No. 402 & 403) for platforms and shelves.
50mm thick platforms / lofts:
Third Floor :
192 Reinforced Cement Concrete M 20 nominal mix using 12mm Supply and placing of the Design Supply and placing of the Design Mix
size hard granite machine crushed graded metal (coarse Mix Concrete M 30 grade Concrete M 30 grade
aggregate - as per IS 383 - 1970 and IS 2386 Part 1 to Part 8)
from approved quarry, using a minimum quantity of 350 kgs. of
cement per 1 cum of concrete using concrete Mixer 10 / 7 cft
(0.2 / 0.8 cum) capacity including cost and conveyance of all
materials like cement, fine aggregate (Sand), coarse
aggregate, water etc., to site including centering, shuttering,
labour charges such as weigh batching, machine mixing, hire
charges of concrete mixer, laying concrete, lift charges, curing
etc., and overheads & contractors profit complete for finished
item of work (APSS No. 402 & 403) for platforms and shelves.
50mm thick platforms / lofts:
Fourth Floor :
3 Reinforced Cement Concrete M 20 nominal mix using 12mm Supply and placing of the Design Supply and placing of the Design Mix
size hard granite machine crushed graded metal (coarse Mix Concrete M 30 grade Concrete M 30 grade
aggregate - as per IS 383 - 1970 and IS 2386 Part 1 to Part 8)
from approved quarry, using a minimum quantity of 350 kgs. of
cement per 1 cum of concrete using concrete Mixer 10 / 7 cft
(0.2 / 0.8 cum) capacity including cost and conveyance of all
materials like cement, fine aggregate (Sand), coarse
aggregate, water etc., to site including centering, shuttering,
labour charges such as weigh batching, machine mixing, hire
charges of concrete mixer, laying concrete, lift charges, curing
etc., and overheads & contractors profit complete for finished
item of work (APSS No. 402 & 403) for platforms and shelves.
25mm thick shelves :
Cellar :
40 Reinforced Cement Concrete M 20 nominal mix using 12mm Supply and placing of the Design Supply and placing of the Design Mix
size hard granite machine crushed graded metal (coarse Mix Concrete M 30 grade Concrete M 30 grade
aggregate - as per IS 383 - 1970 and IS 2386 Part 1 to Part 8)
from approved quarry, using a minimum quantity of 350 kgs. of
cement per 1 cum of concrete using concrete Mixer 10 / 7 cft
(0.2 / 0.8 cum) capacity including cost and conveyance of all
materials like cement, fine aggregate (Sand), coarse
aggregate, water etc., to site including centering, shuttering,
labour charges such as weigh batching, machine mixing, hire
charges of concrete mixer, laying concrete, lift charges, curing
etc., and overheads & contractors profit complete for finished
item of work (APSS No. 402 & 403) for platforms and shelves.
25mm thick shelves :
Basement Floor
9 Reinforced Cement Concrete M 20 nominal mix using 12mm Supply and placing of the Design Supply and placing of the Design Mix
size hard granite machine crushed graded metal (coarse Mix Concrete M 30 grade Concrete M 30 grade
aggregate - as per IS 383 - 1970 and IS 2386 Part 1 to Part 8)
from approved quarry, using a minimum quantity of 350 kgs. of
cement per 1 cum of concrete using concrete Mixer 10 / 7 cft
(0.2 / 0.8 cum) capacity including cost and conveyance of all
materials like cement, fine aggregate (Sand), coarse
aggregate, water etc., to site including centering, shuttering,
labour charges such as weigh batching, machine mixing, hire
charges of concrete mixer, laying concrete, lift charges, curing
etc., and overheads & contractors profit complete for finished
item of work (APSS No. 402 & 403) for platforms and shelves.
25mm thick shelves :
First Floor :
17 Reinforced Cement Concrete M 20 nominal mix using 12mm Supply and placing of the Design Supply and placing of the Design Mix
size hard granite machine crushed graded metal (coarse Mix Concrete M 30 grade Concrete M 30 grade
aggregate - as per IS 383 - 1970 and IS 2386 Part 1 to Part 8)
from approved quarry, using a minimum quantity of 350 kgs. of
cement per 1 cum of concrete using concrete Mixer 10 / 7 cft
(0.2 / 0.8 cum) capacity including cost and conveyance of all
materials like cement, fine aggregate (Sand), coarse
aggregate, water etc., to site including centering, shuttering,
labour charges such as weigh batching, machine mixing, hire
charges of concrete mixer, laying concrete, lift charges, curing
etc., and overheads & contractors profit complete for finished
item of work (APSS No. 402 & 403) for platforms and shelves.
25mm thick shelves :
Second Floor :
71 Reinforced Cement Concrete M 20 nominal mix using 12mm Supply and placing of the Design Supply and placing of the Design Mix
size hard granite machine crushed graded metal (coarse Mix Concrete M 30 grade Concrete M 30 grade
aggregate - as per IS 383 - 1970 and IS 2386 Part 1 to Part 8)
from approved quarry, using a minimum quantity of 350 kgs. of
cement per 1 cum of concrete using concrete Mixer 10 / 7 cft
(0.2 / 0.8 cum) capacity including cost and conveyance of all
materials like cement, fine aggregate (Sand), coarse
aggregate, water etc., to site including centering, shuttering,
labour charges such as weigh batching, machine mixing, hire
charges of concrete mixer, laying concrete, lift charges, curing
etc., and overheads & contractors profit complete for finished
item of work (APSS No. 402 & 403) for platforms and shelves.
25mm thick shelves :
Third Floor :
108 Reinforced Cement Concrete M 20 nominal mix using 12mm Supply and placing of the Design Supply and placing of the Design Mix
size hard granite machine crushed graded metal (coarse Mix Concrete M 30 grade Concrete M 30 grade
aggregate - as per IS 383 - 1970 and IS 2386 Part 1 to Part 8)
from approved quarry, using a minimum quantity of 350 kgs. of
cement per 1 cum of concrete using concrete Mixer 10 / 7 cft
(0.2 / 0.8 cum) capacity including cost and conveyance of all
materials like cement, fine aggregate (Sand), coarse
aggregate, water etc., to site including centering, shuttering,
labour charges such as weigh batching, machine mixing, hire
charges of concrete mixer, laying concrete, lift charges, curing
etc., and overheads & contractors profit complete for finished
item of work (APSS No. 402 & 403) for platforms and shelves.
25mm thick shelves :
Fourth Floor :
4 Plain Cement Concrete M 20 nominal mix using 20mm size Plain Cement Concrete M 20 Plain Cement Concrete M 20 nominal
graded machine crushed hard granite metal (coarse aggregate - nominal mix mix
as per IS 383 - 1970 and IS 2386 Part 1 to Part 8) from
approved quarry using concrete Mixer 10 / 7 cft (0.2 / 0.8 cum)
capacity including cost and conveyance of all materials like
cement, fine aggregate(sand), coarse aggregate, water etc. to
site including all charges centering, labour charges such as
weigh batching, machine mixing, hire charges of concrete
mixer, laying concrete in position, curing etc., & lift charges ,
and overheads & contractors profit for steps for finished item of
work. (APSS No. 402)
Cellar :
6 Plain Cement Concrete M 20 nominal mix using 20mm size Plain Cement Concrete M 20 Plain Cement Concrete M 20 nominal
graded machine crushed hard granite metal (coarse aggregate - nominal mix mix
as per IS 383 - 1970 and IS 2386 Part 1 to Part 8) from
approved quarry using concrete Mixer 10 / 7 cft (0.2 / 0.8 cum)
capacity including cost and conveyance of all materials like
cement, fine aggregate(sand), coarse aggregate, water etc. to
site including all charges centering, labour charges such as
weigh batching, machine mixing, hire charges of concrete
mixer, laying concrete in position, curing etc., & lift charges ,
and overheads & contractors profit for steps for finished item of
work. (APSS No. 402)
Basement Floor
#REF! Plain Cement Concrete M 20 nominal mix using 20mm size Plain Cement Concrete M 20 Plain Cement Concrete M 20 nominal
graded machine crushed hard granite metal (coarse aggregate - nominal mix mix
as per IS 383 - 1970 and IS 2386 Part 1 to Part 8) from
approved quarry using concrete Mixer 10 / 7 cft (0.2 / 0.8 cum)
capacity including cost and conveyance of all materials like
cement, fine aggregate(sand), coarse aggregate, water etc. to
site including all charges centering, labour charges such as
weigh batching, machine mixing, hire charges of concrete
mixer, laying concrete in position, curing etc., & lift charges ,
and overheads & contractors profit for steps for finished item of
work. (APSS No. 402)
First Floor :
6 Plain Cement Concrete M 20 nominal mix using 20mm size Plain Cement Concrete M 20 Plain Cement Concrete M 20 nominal
graded machine crushed hard granite metal (coarse aggregate - nominal mix mix
as per IS 383 - 1970 and IS 2386 Part 1 to Part 8) from
approved quarry using concrete Mixer 10 / 7 cft (0.2 / 0.8 cum)
capacity including cost and conveyance of all materials like
cement, fine aggregate(sand), coarse aggregate, water etc. to
site including all charges centering, labour charges such as
weigh batching, machine mixing, hire charges of concrete
mixer, laying concrete in position, curing etc., & lift charges ,
and overheads & contractors profit for steps for finished item of
work. (APSS No. 402)
Second Floor :
6 Plain Cement Concrete M 20 nominal mix using 20mm size Plain Cement Concrete M 20 Plain Cement Concrete M 20 nominal
graded machine crushed hard granite metal (coarse aggregate - nominal mix mix
as per IS 383 - 1970 and IS 2386 Part 1 to Part 8) from
approved quarry using concrete Mixer 10 / 7 cft (0.2 / 0.8 cum)
capacity including cost and conveyance of all materials like
cement, fine aggregate(sand), coarse aggregate, water etc. to
site including all charges centering, labour charges such as
weigh batching, machine mixing, hire charges of concrete
mixer, laying concrete in position, curing etc., & lift charges ,
and overheads & contractors profit for steps for finished item of
work. (APSS No. 402)
Third Floor :
6 Plain Cement Concrete M 20 nominal mix using 20mm size Plain Cement Concrete M 20 Plain Cement Concrete M 20 nominal
graded machine crushed hard granite metal (coarse aggregate - nominal mix mix
as per IS 383 - 1970 and IS 2386 Part 1 to Part 8) from
approved quarry using concrete Mixer 10 / 7 cft (0.2 / 0.8 cum)
capacity including cost and conveyance of all materials like
cement, fine aggregate(sand), coarse aggregate, water etc. to
site including all charges centering, labour charges such as
weigh batching, machine mixing, hire charges of concrete
mixer, laying concrete in position, curing etc., & lift charges ,
and overheads & contractors profit for steps for finished item of
work. (APSS No. 402)
Fourth Floor :
1 Reinforced Cement Concrete M 20 nominal mix using 12mm Plain Cement Concrete M 20 Plain Cement Concrete M 20 nominal
size hard granite machine crushed graded metal (coarse nominal mix mix
aggregate - as per IS 383 - 1970 and IS 2386 Part 1 to Part 8)
from approved quarry, using a minimum quantity of 350 kgs. of
cement per 1 cum of concrete using concrete Mixer 10 / 7 cft
(0.2 / 0.8 cum) capacity including cost and conveyance of all
materials like cement, fine aggregate (Sand), coarse
aggregate, water etc., to site including centering, shuttering,
labour charges such as weigh batching, machine mixing, hire
charges of concrete mixer, laying concrete, lift charges, curing
etc., and overheads & contractors profit complete for finished
item of work (APSS No. 402 & 403) for sill slabs.
Cellar :
2 Reinforced Cement Concrete M 20 nominal mix using 12mm Plain Cement Concrete M 20 Plain Cement Concrete M 20 nominal
size hard granite machine crushed graded metal (coarse nominal mix mix
aggregate - as per IS 383 - 1970 and IS 2386 Part 1 to Part 8)
from approved quarry, using a minimum quantity of 350 kgs. of
cement per 1 cum of concrete using concrete Mixer 10 / 7 cft
(0.2 / 0.8 cum) capacity including cost and conveyance of all
materials like cement, fine aggregate (Sand), coarse
aggregate, water etc., to site including centering, shuttering,
labour charges such as weigh batching, machine mixing, hire
charges of concrete mixer, laying concrete, lift charges, curing
etc., and overheads & contractors profit complete for finished
item of work (APSS No. 402 & 403) for sill slabs.
Basement Floor
1.9 Reinforced Cement Concrete M 20 nominal mix using 12mm Plain Cement Concrete M 20 Plain Cement Concrete M 20 nominal
size hard granite machine crushed graded metal (coarse nominal mix mix
aggregate - as per IS 383 - 1970 and IS 2386 Part 1 to Part 8)
from approved quarry, using a minimum quantity of 350 kgs. of
cement per 1 cum of concrete using concrete Mixer 10 / 7 cft
(0.2 / 0.8 cum) capacity including cost and conveyance of all
materials like cement, fine aggregate (Sand), coarse
aggregate, water etc., to site including centering, shuttering,
labour charges such as weigh batching, machine mixing, hire
charges of concrete mixer, laying concrete, lift charges, curing
etc., and overheads & contractors profit complete for finished
item of work (APSS No. 402 & 403) for sill slabs.
First Floor :
3.9 Reinforced Cement Concrete M 20 nominal mix using 12mm Plain Cement Concrete M 20 Plain Cement Concrete M 20 nominal
size hard granite machine crushed graded metal (coarse nominal mix mix
aggregate - as per IS 383 - 1970 and IS 2386 Part 1 to Part 8)
from approved quarry, using a minimum quantity of 350 kgs. of
cement per 1 cum of concrete using concrete Mixer 10 / 7 cft
(0.2 / 0.8 cum) capacity including cost and conveyance of all
materials like cement, fine aggregate (Sand), coarse
aggregate, water etc., to site including centering, shuttering,
labour charges such as weigh batching, machine mixing, hire
charges of concrete mixer, laying concrete, lift charges, curing
etc., and overheads & contractors profit complete for finished
item of work (APSS No. 402 & 403) for sill slabs.
Second Floor :
2 Reinforced Cement Concrete M 20 nominal mix using 12mm Plain Cement Concrete M 20 Plain Cement Concrete M 20 nominal
size hard granite machine crushed graded metal (coarse nominal mix mix
aggregate - as per IS 383 - 1970 and IS 2386 Part 1 to Part 8)
from approved quarry, using a minimum quantity of 350 kgs. of
cement per 1 cum of concrete using concrete Mixer 10 / 7 cft
(0.2 / 0.8 cum) capacity including cost and conveyance of all
materials like cement, fine aggregate (Sand), coarse
aggregate, water etc., to site including centering, shuttering,
labour charges such as weigh batching, machine mixing, hire
charges of concrete mixer, laying concrete, lift charges, curing
etc., and overheads & contractors profit complete for finished
item of work (APSS No. 402 & 403) for sill slabs.
Third Floor :
3.3 Reinforced Cement Concrete M 20 nominal mix using 12mm Plain Cement Concrete M 20 Plain Cement Concrete M 20 nominal
size hard granite machine crushed graded metal (coarse nominal mix mix
aggregate - as per IS 383 - 1970 and IS 2386 Part 1 to Part 8)
from approved quarry, using a minimum quantity of 350 kgs. of
cement per 1 cum of concrete using concrete Mixer 10 / 7 cft
(0.2 / 0.8 cum) capacity including cost and conveyance of all
materials like cement, fine aggregate (Sand), coarse
aggregate, water etc., to site including centering, shuttering,
labour charges such as weigh batching, machine mixing, hire
charges of concrete mixer, laying concrete, lift charges, curing
etc., and overheads & contractors profit complete for finished
item of work (APSS No. 402 & 403) for sill slabs.
Fourth Floor :
245 Brick masonry for panel walls in superstructure with CM (1:8) Brick masonry for panel walls in Brick masonry for panel walls in
prop: (Cement : Sand) using common burnt clay bricks of class superstructure with CM (1:8) prop superstructure with CM (1:8) prop
as per Table- I of IS:1077-1992, Non- Modular or traditional size
23 x 11 x 7 cms from approved source having minimum
crushing strength of 40 Kg/Sqcm. including cost and
conveyance of all materials like cement, screened sand, bricks,
water etc., to site, labour charges, like mixing cement mortar,
scaffolding charges, constructing masonry, lift charges, curing,
etc.,and overheads & contractors profit complete for finished
item of work. (APSS No. 501 & 504).
Cellar :
472 Brick masonry for panel walls in superstructure with CM (1:8) Brick masonry for panel walls in Brick masonry for panel walls in
prop: (Cement : Sand) using common burnt clay bricks of class superstructure with CM (1:8) prop superstructure with CM (1:8) prop
as per Table- I of IS:1077-1992, Non- Modular or traditional size
23 x 11 x 7 cms from approved source having minimum
crushing strength of 40 Kg/Sqcm. including cost and
conveyance of all materials like cement, screened sand, bricks,
water etc., to site, labour charges, like mixing cement mortar,
scaffolding charges, constructing masonry, lift charges, curing,
etc.,and overheads & contractors profit complete for finished
item of work. (APSS No. 501 & 504).
Basement Floor
478 Brick masonry for panel walls in superstructure with CM (1:8) Brick masonry for panel walls in Brick masonry for panel walls in
prop: (Cement : Sand) using common burnt clay bricks of class superstructure with CM (1:8) prop superstructure with CM (1:8) prop
as per Table- I of IS:1077-1992, Non- Modular or traditional size
23 x 11 x 7 cms from approved source having minimum
crushing strength of 40 Kg/Sqcm. including cost and
conveyance of all materials like cement, screened sand, bricks,
water etc., to site, labour charges, like mixing cement mortar,
scaffolding charges, constructing masonry, lift charges, curing,
etc.,and overheads & contractors profit complete for finished
item of work. (APSS No. 501 & 504).
First Floor :
368 Brick masonry for panel walls in superstructure with CM (1:8) Brick masonry for panel walls in Brick masonry for panel walls in
prop: (Cement : Sand) using common burnt clay bricks of class superstructure with CM (1:8) prop superstructure with CM (1:8) prop
as per Table- I of IS:1077-1992, Non- Modular or traditional size
23 x 11 x 7 cms from approved source having minimum
crushing strength of 40 Kg/Sqcm. including cost and
conveyance of all materials like cement, screened sand, bricks,
water etc., to site, labour charges, like mixing cement mortar,
scaffolding charges, constructing masonry, lift charges, curing,
etc.,and overheads & contractors profit complete for finished
item of work. (APSS No. 501 & 504).
Second Floor :
580 Brick masonry for panel walls in superstructure with CM (1:8) Brick masonry for panel walls in Brick masonry for panel walls in
prop: (Cement : Sand) using common burnt clay bricks of class superstructure with CM (1:8) prop superstructure with CM (1:8) prop
as per Table- I of IS:1077-1992, Non- Modular or traditional size
23 x 11 x 7 cms from approved source having minimum
crushing strength of 40 Kg/Sqcm. including cost and
conveyance of all materials like cement, screened sand, bricks,
water etc., to site, labour charges, like mixing cement mortar,
scaffolding charges, constructing masonry, lift charges, curing,
etc.,and overheads & contractors profit complete for finished
item of work. (APSS No. 501 & 504).
Third Floor :
388 Brick masonry for panel walls in superstructure with CM (1:8) Brick masonry for panel walls in Brick masonry for panel walls in
prop: (Cement : Sand) using common burnt clay bricks of class superstructure with CM (1:8) prop superstructure with CM (1:8) prop
as per Table- I of IS:1077-1992, Non- Modular or traditional size
23 x 11 x 7 cms from approved source having minimum
crushing strength of 40 Kg/Sqcm. including cost and
conveyance of all materials like cement, screened sand, bricks,
water etc., to site, labour charges, like mixing cement mortar,
scaffolding charges, constructing masonry, lift charges, curing,
etc.,and overheads & contractors profit complete for finished
item of work. (APSS No. 501 & 504).
Fourth Floor :
86 Brick masonry for panel walls in superstructure with CM (1:8) Brick masonry for panel walls in Brick masonry for panel walls in
prop: (Cement : Sand) using common burnt clay bricks of class superstructure with CM (1:8) prop superstructure with CM (1:8) prop
as per Table- I of IS:1077-1992, Non- Modular or traditional size
23 x 11 x 7 cms from approved source having minimum
crushing strength of 40 Kg/Sqcm. including cost and
conveyance of all materials like cement, screened sand, bricks,
water etc., to site, labour charges, like mixing cement mortar,
scaffolding charges, constructing masonry, lift charges, curing,
etc.,and overheads & contractors profit complete for finished
item of work. (APSS No. 501 & 504).
Fifth Floor :
#REF! Brick masonry for panel walls in superstructure with CM (1:8) Brick masonry for panel walls in Brick masonry for panel walls in
prop: (Cement : Sand) using common burnt clay bricks of class superstructure with CM (1:8) prop superstructure with CM (1:8) prop
as per Table- I of IS:1077-1992, Non- Modular or traditional size
23 x 11 x 7 cms from approved source having minimum
crushing strength of 40 Kg/Sqcm. including cost and
conveyance of all materials like cement, screened sand, bricks,
water etc., to site, labour charges, like mixing cement mortar,
scaffolding charges, constructing masonry, lift charges, curing,
etc.,and overheads & contractors profit complete for finished
item of work. (APSS No. 501 & 504).
For Compound wall :
238 Reinforced Brick Masonry for partition walls (11.0 cm thick) in Reinforced Brick Masonry for Reinforced Brick Masonry for partition
CM (1:4) prop. (Cement : Sand) using common burnt clay bricks partition walls (11.0 cm thick) in CM walls (11.0 cm thick) in CM (1:4) prop
of class as per Table- I of IS:1077-1992, Non- Modular or (1:4) prop
traditional size 23 x 11 x 7 cms from approved source having
minimum crushing strength of 40 Kg/Sq.cm and placing 2 Nos.
of 6mm M.S plain rods in every third layer with free ends of the
reinforcement pegged into mortar joints of main brick walls
where applicable including cost and conveyance of all materials
like cement, steel, sand, bricks, water etc., to site, all
operational, incidental charges such as labour charges for
mixing cement mortar, scaffolding charges, constructing
masonry, lift charges, curing, etc., and overheads & contractors
profit but excluding cost of steel and its fabrication charges
complete for finished item of work. (APSS No. of 501 & 509)
Cellar :
1262 Reinforced Brick Masonry for partition walls (11.0 cm thick) in Reinforced Brick Masonry for Reinforced Brick Masonry for partition
CM (1:4) prop. (Cement : Sand) using common burnt clay bricks partition walls (11.0 cm thick) in CM walls (11.0 cm thick) in CM (1:4) prop
of class as per Table- I of IS:1077-1992, Non- Modular or (1:4) prop
traditional size 23 x 11 x 7 cms from approved source having
minimum crushing strength of 40 Kg/Sq.cm and placing 2 Nos.
of 6mm M.S plain rods in every third layer with free ends of the
reinforcement pegged into mortar joints of main brick walls
where applicable including cost and conveyance of all materials
like cement, steel, sand, bricks, water etc., to site, all
operational, incidental charges such as labour charges for
mixing cement mortar, scaffolding charges, constructing
masonry, lift charges, curing, etc., and overheads & contractors
profit but excluding cost of steel and its fabrication charges
complete for finished item of work. (APSS No. of 501 & 509)
Basement Floor
1358 Reinforced Brick Masonry for partition walls (11.0 cm thick) in Reinforced Brick Masonry for Reinforced Brick Masonry for partition
CM (1:4) prop. (Cement : Sand) using common burnt clay bricks partition walls (11.0 cm thick) in CM walls (11.0 cm thick) in CM (1:4) prop
of class as per Table- I of IS:1077-1992, Non- Modular or (1:4) prop
traditional size 23 x 11 x 7 cms from approved source having
minimum crushing strength of 40 Kg/Sq.cm and placing 2 Nos.
of 6mm M.S plain rods in every third layer with free ends of the
reinforcement pegged into mortar joints of main brick walls
where applicable including cost and conveyance of all materials
like cement, steel, sand, bricks, water etc., to site, all
operational, incidental charges such as labour charges for
mixing cement mortar, scaffolding charges, constructing
masonry, lift charges, curing, etc., and overheads & contractors
profit but excluding cost of steel and its fabrication charges
complete for finished item of work. (APSS No. of 501 & 509)
First Floor :
1394 Reinforced Brick Masonry for partition walls (11.0 cm thick) in Reinforced Brick Masonry for Reinforced Brick Masonry for partition
CM (1:4) prop. (Cement : Sand) using common burnt clay bricks partition walls (11.0 cm thick) in CM walls (11.0 cm thick) in CM (1:4) prop
of class as per Table- I of IS:1077-1992, Non- Modular or (1:4) prop
traditional size 23 x 11 x 7 cms from approved source having
minimum crushing strength of 40 Kg/Sq.cm and placing 2 Nos.
of 6mm M.S plain rods in every third layer with free ends of the
reinforcement pegged into mortar joints of main brick walls
where applicable including cost and conveyance of all materials
like cement, steel, sand, bricks, water etc., to site, all
operational, incidental charges such as labour charges for
mixing cement mortar, scaffolding charges, constructing
masonry, lift charges, curing, etc., and overheads & contractors
profit but excluding cost of steel and its fabrication charges
complete for finished item of work. (APSS No. of 501 & 509)
Second Floor :
1726 Reinforced Brick Masonry for partition walls (11.0 cm thick) in Reinforced Brick Masonry for Reinforced Brick Masonry for partition
CM (1:4) prop. (Cement : Sand) using common burnt clay bricks partition walls (11.0 cm thick) in CM walls (11.0 cm thick) in CM (1:4) prop
of class as per Table- I of IS:1077-1992, Non- Modular or (1:4) prop
traditional size 23 x 11 x 7 cms from approved source having
minimum crushing strength of 40 Kg/Sq.cm and placing 2 Nos.
of 6mm M.S plain rods in every third layer with free ends of the
reinforcement pegged into mortar joints of main brick walls
where applicable including cost and conveyance of all materials
like cement, steel, sand, bricks, water etc., to site, all
operational, incidental charges such as labour charges for
mixing cement mortar, scaffolding charges, constructing
masonry, lift charges, curing, etc., and overheads & contractors
profit but excluding cost of steel and its fabrication charges
complete for finished item of work. (APSS No. of 501 & 509)
Third Floor :
1161 Reinforced Brick Masonry for partition walls (11.0 cm thick) in Reinforced Brick Masonry for Reinforced Brick Masonry for partition
CM (1:4) prop. (Cement : Sand) using common burnt clay bricks partition walls (11.0 cm thick) in CM walls (11.0 cm thick) in CM (1:4) prop
of class as per Table- I of IS:1077-1992, Non- Modular or (1:4) prop
traditional size 23 x 11 x 7 cms from approved source having
minimum crushing strength of 40 Kg/Sq.cm and placing 2 Nos.
of 6mm M.S plain rods in every third layer with free ends of the
reinforcement pegged into mortar joints of main brick walls
where applicable including cost and conveyance of all materials
like cement, steel, sand, bricks, water etc., to site, all
operational, incidental charges such as labour charges for
mixing cement mortar, scaffolding charges, constructing
masonry, lift charges, curing, etc., and overheads & contractors
profit but excluding cost of steel and its fabrication charges
complete for finished item of work. (APSS No. of 501 & 509)
Fourth Floor :
458 Reinforced Brick Masonry for partition walls (11.0 cm thick) in Reinforced Brick Masonry for Reinforced Brick Masonry for partition
CM (1:4) prop. (Cement : Sand) using common burnt clay bricks partition walls (11.0 cm thick) in CM walls (11.0 cm thick) in CM (1:4) prop
of class as per Table- I of IS:1077-1992, Non- Modular or (1:4) prop
traditional size 23 x 11 x 7 cms from approved source having
minimum crushing strength of 40 Kg/Sq.cm and placing 2 Nos.
of 6mm M.S plain rods in every third layer with free ends of the
reinforcement pegged into mortar joints of main brick walls
where applicable including cost and conveyance of all materials
like cement, steel, sand, bricks, water etc., to site, all
operational, incidental charges such as labour charges for
mixing cement mortar, scaffolding charges, constructing
masonry, lift charges, curing, etc., and overheads & contractors
profit but excluding cost of steel and its fabrication charges
complete for finished item of work. (APSS No. of 501 & 509)
Fifth Floor :
5.8 Plain Cement Concrete (1:3:6) nominal mix using 20mm size Plain Cement Concrete (1:3:6) Plain Cement Concrete (1:3:6)
graded machine crushed hard granite metal (coarse aggregate -
as per IS 383 - 1970 and IS 2386 Part 1 to Part 8) from
approved quarry using concrete Mixer 10 / 7 cft (0.2 / 0.8 cum)
capacity including cost and conveyance of all materials like
cement, fine aggregate(sand), coarse aggregate, water etc. to
site including all charges for machine mixing, hire charges of
concrete mixer, laying concrete in position, curing etc., & lift
charges , and overheads & contractors profit for bed blocks &
hold fasts for finished item of work. (APSS No. 402)
Cellar :
66.6 Plain Cement Concrete (1:3:6) nominal mix using 20mm size Plain Cement Concrete (1:3:6) Plain Cement Concrete (1:3:6)
graded machine crushed hard granite metal (coarse aggregate -
as per IS 383 - 1970 and IS 2386 Part 1 to Part 8) from
approved quarry using concrete Mixer 10 / 7 cft (0.2 / 0.8 cum)
capacity including cost and conveyance of all materials like
cement, fine aggregate(sand), coarse aggregate, water etc. to
site including all charges for machine mixing, hire charges of
concrete mixer, laying concrete in position, curing etc., & lift
charges , and overheads & contractors profit for bed blocks &
hold fasts for finished item of work. (APSS No. 402)
Basement Floor
14 Plain Cement Concrete (1:3:6) nominal mix using 20mm size Plain Cement Concrete (1:3:6) Plain Cement Concrete (1:3:6)
graded machine crushed hard granite metal (coarse aggregate -
as per IS 383 - 1970 and IS 2386 Part 1 to Part 8) from
approved quarry using concrete Mixer 10 / 7 cft (0.2 / 0.8 cum)
capacity including cost and conveyance of all materials like
cement, fine aggregate(sand), coarse aggregate, water etc. to
site including all charges for machine mixing, hire charges of
concrete mixer, laying concrete in position, curing etc., & lift
charges , and overheads & contractors profit for bed blocks &
hold fasts for finished item of work. (APSS No. 402)
First Floor :
18 Plain Cement Concrete (1:3:6) nominal mix using 20mm size Plain Cement Concrete (1:3:6) Plain Cement Concrete (1:3:6)
graded machine crushed hard granite metal (coarse aggregate -
as per IS 383 - 1970 and IS 2386 Part 1 to Part 8) from
approved quarry using concrete Mixer 10 / 7 cft (0.2 / 0.8 cum)
capacity including cost and conveyance of all materials like
cement, fine aggregate(sand), coarse aggregate, water etc. to
site including all charges for machine mixing, hire charges of
concrete mixer, laying concrete in position, curing etc., & lift
charges , and overheads & contractors profit for bed blocks &
hold fasts for finished item of work. (APSS No. 402)
Second Floor :
13 Plain Cement Concrete (1:3:6) nominal mix using 20mm size Plain Cement Concrete (1:3:6) Plain Cement Concrete (1:3:6)
graded machine crushed hard granite metal (coarse aggregate -
as per IS 383 - 1970 and IS 2386 Part 1 to Part 8) from
approved quarry using concrete Mixer 10 / 7 cft (0.2 / 0.8 cum)
capacity including cost and conveyance of all materials like
cement, fine aggregate(sand), coarse aggregate, water etc. to
site including all charges for machine mixing, hire charges of
concrete mixer, laying concrete in position, curing etc., & lift
charges , and overheads & contractors profit for bed blocks &
hold fasts for finished item of work. (APSS No. 402)
Third Floor :
17 Plain Cement Concrete (1:3:6) nominal mix using 20mm size Plain Cement Concrete (1:3:6) Plain Cement Concrete (1:3:6)
graded machine crushed hard granite metal (coarse aggregate -
as per IS 383 - 1970 and IS 2386 Part 1 to Part 8) from
approved quarry using concrete Mixer 10 / 7 cft (0.2 / 0.8 cum)
capacity including cost and conveyance of all materials like
cement, fine aggregate(sand), coarse aggregate, water etc. to
site including all charges for machine mixing, hire charges of
concrete mixer, laying concrete in position, curing etc., & lift
charges , and overheads & contractors profit for bed blocks &
hold fasts for finished item of work. (APSS No. 402)
Fourth Floor :
1 Plain Cement Concrete (1:3:6) nominal mix using 20mm size Plain Cement Concrete (1:3:6) Plain Cement Concrete (1:3:6)
graded machine crushed hard granite metal (coarse aggregate -
as per IS 383 - 1970 and IS 2386 Part 1 to Part 8) from
approved quarry using concrete Mixer 10 / 7 cft (0.2 / 0.8 cum)
capacity including cost and conveyance of all materials like
cement, fine aggregate(sand), coarse aggregate, water etc. to
site including all charges for machine mixing, hire charges of
concrete mixer, laying concrete in position, curing etc., & lift
charges , and overheads & contractors profit for bed blocks &
hold fasts for finished item of work. (APSS No. 402)
Fifth Floor :
360.721 Providing Thermo Mechanically Treated (TMT) (Fe 500 / Fe 500 Providing Thermo Mechanically Plain Cement Concrete (1:3:6)
D grade as per IS 1786-1979) of different diameters for RCC Treated (TMT) (Fe 500 / Fe 500 D
works including labour charges for straightening, cutting, grade)
bending to required sizes and shapes, placing in position with
cover blocks of approved materials and size and tying and lap-
splicing with binding wire of 18 SWG, forming grills for
reinforcement work as per approved designs and drawings,
including cost and conveyance of steel bars, including all
wastages such as overlaps, couplings, chairs, spacer bars
including cost and conveyance of binding wire, cover blocks and
all incidental, operational, labour charges such as cutting,
bending, placing in position, tying etc., and overheads &
contractors profit complete for finished item of work.( APSS
No.126)
Cellar :
152.4 Providing Thermo Mechanically Treated (TMT) (Fe 500 / Fe 500 Providing Thermo Mechanically Plain Cement Concrete (1:3:6)
D grade as per IS 1786-1979) of different diameters for RCC Treated (TMT) (Fe 500 / Fe 500 D
works including labour charges for straightening, cutting, grade)
bending to required sizes and shapes, placing in position with
cover blocks of approved materials and size and tying and lap-
splicing with binding wire of 18 SWG, forming grills for
reinforcement work as per approved designs and drawings,
including cost and conveyance of steel bars, including all
wastages such as overlaps, couplings, chairs, spacer bars
including cost and conveyance of binding wire, cover blocks and
all incidental, operational, labour charges such as cutting,
bending, placing in position, tying etc., and overheads &
contractors profit complete for finished item of work.( APSS
No.126)
Basement Floor
#REF! Providing Thermo Mechanically Treated (TMT) (Fe 500 / Fe 500 Providing Thermo Mechanically Plain Cement Concrete (1:3:6)
D grade as per IS 1786-1979) of different diameters for RCC Treated (TMT) (Fe 500 / Fe 500 D
works including labour charges for straightening, cutting, grade)
bending to required sizes and shapes, placing in position with
cover blocks of approved materials and size and tying and lap-
splicing with binding wire of 18 SWG, forming grills for
reinforcement work as per approved designs and drawings,
including cost and conveyance of steel bars, including all
wastages such as overlaps, couplings, chairs, spacer bars
including cost and conveyance of binding wire, cover blocks and
all incidental, operational, labour charges such as cutting,
bending, placing in position, tying etc., and overheads &
contractors profit complete for finished item of work.( APSS
No.126)
First Floor :
115.8 Providing Thermo Mechanically Treated (TMT) (Fe 500 / Fe 500 Providing Thermo Mechanically Plain Cement Concrete (1:3:6)
D grade as per IS 1786-1979) of different diameters for RCC Treated (TMT) (Fe 500 / Fe 500 D
works including labour charges for straightening, cutting, grade)
bending to required sizes and shapes, placing in position with
cover blocks of approved materials and size and tying and lap-
splicing with binding wire of 18 SWG, forming grills for
reinforcement work as per approved designs and drawings,
including cost and conveyance of steel bars, including all
wastages such as overlaps, couplings, chairs, spacer bars
including cost and conveyance of binding wire, cover blocks and
all incidental, operational, labour charges such as cutting,
bending, placing in position, tying etc., and overheads &
contractors profit complete for finished item of work.( APSS
No.126)
Second Floor :
122.5 Providing Thermo Mechanically Treated (TMT) (Fe 500 / Fe 500 Providing Thermo Mechanically Plain Cement Concrete (1:3:6)
D grade as per IS 1786-1979) of different diameters for RCC Treated (TMT) (Fe 500 / Fe 500 D
works including labour charges for straightening, cutting, grade)
bending to required sizes and shapes, placing in position with
cover blocks of approved materials and size and tying and lap-
splicing with binding wire of 18 SWG, forming grills for
reinforcement work as per approved designs and drawings,
including cost and conveyance of steel bars, including all
wastages such as overlaps, couplings, chairs, spacer bars
including cost and conveyance of binding wire, cover blocks and
all incidental, operational, labour charges such as cutting,
bending, placing in position, tying etc., and overheads &
contractors profit complete for finished item of work.( APSS
No.126)
Third Floor :
115.6 Providing Thermo Mechanically Treated (TMT) (Fe 500 / Fe 500 Providing Thermo Mechanically Plain Cement Concrete (1:3:6)
D grade as per IS 1786-1979) of different diameters for RCC Treated (TMT) (Fe 500 / Fe 500 D
works including labour charges for straightening, cutting, grade)
bending to required sizes and shapes, placing in position with
cover blocks of approved materials and size and tying and lap-
splicing with binding wire of 18 SWG, forming grills for
reinforcement work as per approved designs and drawings,
including cost and conveyance of steel bars, including all
wastages such as overlaps, couplings, chairs, spacer bars
including cost and conveyance of binding wire, cover blocks and
all incidental, operational, labour charges such as cutting,
bending, placing in position, tying etc., and overheads &
contractors profit complete for finished item of work.( APSS
No.126)
Fourth Floor :
29 Providing Thermo Mechanically Treated (TMT) (Fe 500 / Fe 500 Providing Thermo Mechanically Plain Cement Concrete (1:3:6)
D grade as per IS 1786-1979) of different diameters for RCC Treated (TMT) (Fe 500 / Fe 500 D
works including labour charges for straightening, cutting, grade)
bending to required sizes and shapes, placing in position with
cover blocks of approved materials and size and tying and lap-
splicing with binding wire of 18 SWG, forming grills for
reinforcement work as per approved designs and drawings,
including cost and conveyance of steel bars, including all
wastages such as overlaps, couplings, chairs, spacer bars
including cost and conveyance of binding wire, cover blocks and
all incidental, operational, labour charges such as cutting,
bending, placing in position, tying etc., and overheads &
contractors profit complete for finished item of work.( APSS
No.126)
Fifth Floor :
0.86 Providing Mild steel (MS) steel bars (Fe 250 grade as per IS Providing Mild steel (MS) steel bars Providing Mild steel (MS) steel bars
432) of different diameters including labour charges for (Fe 250 grade) (Fe 250 grade)
straightening, cutting, bending to required sizes and shapes,
placing in position with cover blocks of approved materials and
size and tying and lap-splicing with binding wire of 18 SWG,
forming grills for reinforcement work as per approved designs
and drawings, including cost and conveyance of steel bars,
including all wastages such as overlaps, couplings, chairs,
spacer bars including cost and conveyance of binding wire,
cover blocks and all incidental, operational, labour charges such
as cutting, bending, placing in position, tying etc., and
overheads & contractors profit complete for finished item of
work.( APSS No.126)
Cellar :
2.6 Providing Mild steel (MS) steel bars (Fe 250 grade as per IS Providing Mild steel (MS) steel bars Providing Mild steel (MS) steel bars
432) of different diameters including labour charges for (Fe 250 grade) (Fe 250 grade)
straightening, cutting, bending to required sizes and shapes,
placing in position with cover blocks of approved materials and
size and tying and lap-splicing with binding wire of 18 SWG,
forming grills for reinforcement work as per approved designs
and drawings, including cost and conveyance of steel bars,
including all wastages such as overlaps, couplings, chairs,
spacer bars including cost and conveyance of binding wire,
cover blocks and all incidental, operational, labour charges such
as cutting, bending, placing in position, tying etc., and
overheads & contractors profit complete for finished item of
work.( APSS No.126)
Basement Floor
0.86 Providing Mild steel (MS) steel bars (Fe 250 grade as per IS Providing Mild steel (MS) steel bars Providing Mild steel (MS) steel bars
432) of different diameters including labour charges for (Fe 250 grade) (Fe 250 grade)
straightening, cutting, bending to required sizes and shapes,
placing in position with cover blocks of approved materials and
size and tying and lap-splicing with binding wire of 18 SWG,
forming grills for reinforcement work as per approved designs
and drawings, including cost and conveyance of steel bars,
including all wastages such as overlaps, couplings, chairs,
spacer bars including cost and conveyance of binding wire,
cover blocks and all incidental, operational, labour charges such
as cutting, bending, placing in position, tying etc., and
overheads & contractors profit complete for finished item of
work.( APSS No.126)
First Floor :
1.86 Providing Mild steel (MS) steel bars (Fe 250 grade as per IS Providing Mild steel (MS) steel bars Providing Mild steel (MS) steel bars
432) of different diameters including labour charges for (Fe 250 grade) (Fe 250 grade)
straightening, cutting, bending to required sizes and shapes,
placing in position with cover blocks of approved materials and
size and tying and lap-splicing with binding wire of 18 SWG,
forming grills for reinforcement work as per approved designs
and drawings, including cost and conveyance of steel bars,
including all wastages such as overlaps, couplings, chairs,
spacer bars including cost and conveyance of binding wire,
cover blocks and all incidental, operational, labour charges such
as cutting, bending, placing in position, tying etc., and
overheads & contractors profit complete for finished item of
work.( APSS No.126)
Second Floor :
1.67 Providing Mild steel (MS) steel bars (Fe 250 grade as per IS Providing Mild steel (MS) steel bars Providing Mild steel (MS) steel bars
432) of different diameters including labour charges for (Fe 250 grade) (Fe 250 grade)
straightening, cutting, bending to required sizes and shapes,
placing in position with cover blocks of approved materials and
size and tying and lap-splicing with binding wire of 18 SWG,
forming grills for reinforcement work as per approved designs
and drawings, including cost and conveyance of steel bars,
including all wastages such as overlaps, couplings, chairs,
spacer bars including cost and conveyance of binding wire,
cover blocks and all incidental, operational, labour charges such
as cutting, bending, placing in position, tying etc., and
overheads & contractors profit complete for finished item of
work.( APSS No.126)
Third Floor :
3.03 Providing Mild steel (MS) steel bars (Fe 250 grade as per IS Providing Mild steel (MS) steel bars Providing Mild steel (MS) steel bars
432) of different diameters including labour charges for (Fe 250 grade) (Fe 250 grade)
straightening, cutting, bending to required sizes and shapes,
placing in position with cover blocks of approved materials and
size and tying and lap-splicing with binding wire of 18 SWG,
forming grills for reinforcement work as per approved designs
and drawings, including cost and conveyance of steel bars,
including all wastages such as overlaps, couplings, chairs,
spacer bars including cost and conveyance of binding wire,
cover blocks and all incidental, operational, labour charges such
as cutting, bending, placing in position, tying etc., and
overheads & contractors profit complete for finished item of
work.( APSS No.126)
Fourth Floor :
0.23 Providing Mild steel (MS) steel bars (Fe 250 grade as per IS Providing Mild steel (MS) steel bars Providing Mild steel (MS) steel bars
432) of different diameters including labour charges for (Fe 250 grade) (Fe 250 grade)
straightening, cutting, bending to required sizes and shapes,
placing in position with cover blocks of approved materials and
size and tying and lap-splicing with binding wire of 18 SWG,
forming grills for reinforcement work as per approved designs
and drawings, including cost and conveyance of steel bars,
including all wastages such as overlaps, couplings, chairs,
spacer bars including cost and conveyance of binding wire,
cover blocks and all incidental, operational, labour charges such
as cutting, bending, placing in position, tying etc., and
overheads & contractors profit complete for finished item of
work.( APSS No.126)
Fifth Floor :
1837 Ornamental ceiling plastering 12mm thick single coat in CM Ornamental ceiling plastering 12mm Ornamental ceiling plastering 12mm
(1:5) using screened sand including cost and conveyance of all thick single coat in CM (1:5) thick single coat in CM (1:5)
materials like cement, sand, water etc., to site and all
operational, incidental charges on materials and including cost
of all labour charges for mixing mortar, finishing, curing as
directed by Engineer-in-charge etc., and overheads &
contractors profit complete for finished item of work.(SS
901,903 & 904)
Cellar :
2889 Ornamental ceiling plastering 12mm thick single coat in CM Ornamental ceiling plastering 12mm Ornamental ceiling plastering 12mm
(1:5) using screened sand including cost and conveyance of all thick single coat in CM (1:5) thick single coat in CM (1:5)
materials like cement, sand, water etc., to site and all
operational, incidental charges on materials and including cost
of all labour charges for mixing mortar, finishing, curing as
directed by Engineer-in-charge etc., and overheads &
contractors profit complete for finished item of work.(SS
901,903 & 904)
Basement Floor
2683 Ornamental ceiling plastering 12mm thick single coat in CM Ornamental ceiling plastering 12mm Ornamental ceiling plastering 12mm
(1:5) using screened sand including cost and conveyance of all thick single coat in CM (1:5) thick single coat in CM (1:5)
materials like cement, sand, water etc., to site and all
operational, incidental charges on materials and including cost
of all labour charges for mixing mortar, finishing, curing as
directed by Engineer-in-charge etc., and overheads &
contractors profit complete for finished item of work.(SS
901,903 & 904)
First Floor :
2746 Ornamental ceiling plastering 12mm thick single coat in CM Ornamental ceiling plastering 12mm Ornamental ceiling plastering 12mm
(1:5) using screened sand including cost and conveyance of all thick single coat in CM (1:5) thick single coat in CM (1:5)
materials like cement, sand, water etc., to site and all
operational, incidental charges on materials and including cost
of all labour charges for mixing mortar, finishing, curing as
directed by Engineer-in-charge etc., and overheads &
contractors profit complete for finished item of work.(SS
901,903 & 904)
Second Floor :
2163 Ornamental ceiling plastering 12mm thick single coat in CM Ornamental ceiling plastering 12mm Ornamental ceiling plastering 12mm
(1:5) using screened sand including cost and conveyance of all thick single coat in CM (1:5) thick single coat in CM (1:5)
materials like cement, sand, water etc., to site and all
operational, incidental charges on materials and including cost
of all labour charges for mixing mortar, finishing, curing as
directed by Engineer-in-charge etc., and overheads &
contractors profit complete for finished item of work.(SS
901,903 & 904)
Third Floor :
459 Ornamental ceiling plastering 12mm thick single coat in CM Ornamental ceiling plastering 12mm Ornamental ceiling plastering 12mm
(1:5) using screened sand including cost and conveyance of all thick single coat in CM (1:5) thick single coat in CM (1:5)
materials like cement, sand, water etc., to site and all
operational, incidental charges on materials and including cost
of all labour charges for mixing mortar, finishing, curing as
directed by Engineer-in-charge etc., and overheads &
contractors profit complete for finished item of work.(SS
901,903 & 904)
Fourth Floor :
364 Ornamental ceiling plastering 12mm thick single coat in CM Ornamental ceiling plastering 12mm Ornamental ceiling plastering 12mm
(1:5) using screened sand including cost and conveyance of all thick single coat in CM (1:5) thick single coat in CM (1:5)
materials like cement, sand, water etc., to site and all
operational, incidental charges on materials and including cost
of all labour charges for mixing mortar, finishing, curing as
directed by Engineer-in-charge etc., and overheads &
contractors profit complete for finished item of work.(SS
901,903 & 904)
Fifth Floor :
1294 Plastering 12mm thick in two coats using screened sand with Plastering 12mm thick in two coats Plastering 12mm thick in two coats
base coat of 8mm thick in CM (1:6) and top coat of 4mm thick in
CM (1:4) with dubara sponge finishing including cost and
conveyance of all materials like cement, sand, water etc., to site
and all operational, incidental charges on materials and
including cost of all labour charges for mixing mortar, finishing,
scaffolding, lift charges, curing, including cutting grooves as
directed by Engineer - in - charge etc., and overheads &
contractors profit complete for finished item of work. (SS
901,903 & 904) For Internal Walls
Cellar :
3816 Plastering 12mm thick in two coats using screened sand with Plastering 12mm thick in two coats Plastering 12mm thick in two coats
base coat of 8mm thick in CM (1:6) and top coat of 4mm thick in
CM (1:4) with dubara sponge finishing including cost and
conveyance of all materials like cement, sand, water etc., to site
and all operational, incidental charges on materials and
including cost of all labour charges for mixing mortar, finishing,
scaffolding, lift charges, curing, including cutting grooves as
directed by Engineer - in - charge etc., and overheads &
contractors profit complete for finished item of work. (SS
901,903 & 904) For Internal Walls
Basement Floor
3640 Plastering 12mm thick in two coats using screened sand with Plastering 12mm thick in two coats Plastering 12mm thick in two coats
base coat of 8mm thick in CM (1:6) and top coat of 4mm thick in
CM (1:4) with dubara sponge finishing including cost and
conveyance of all materials like cement, sand, water etc., to site
and all operational, incidental charges on materials and
including cost of all labour charges for mixing mortar, finishing,
scaffolding, lift charges, curing, including cutting grooves as
directed by Engineer - in - charge etc., and overheads &
contractors profit complete for finished item of work. (SS
901,903 & 904) For Internal Walls
First Floor :
3511 Plastering 12mm thick in two coats using screened sand with Plastering 12mm thick in two coats Plastering 12mm thick in two coats
base coat of 8mm thick in CM (1:6) and top coat of 4mm thick in
CM (1:4) with dubara sponge finishing including cost and
conveyance of all materials like cement, sand, water etc., to site
and all operational, incidental charges on materials and
including cost of all labour charges for mixing mortar, finishing,
scaffolding, lift charges, curing, including cutting grooves as
directed by Engineer - in - charge etc., and overheads &
contractors profit complete for finished item of work. (SS
901,903 & 904) For Internal Walls
Second Floor :
4193 Plastering 12mm thick in two coats using screened sand with Plastering 12mm thick in two coats Plastering 12mm thick in two coats
base coat of 8mm thick in CM (1:6) and top coat of 4mm thick in
CM (1:4) with dubara sponge finishing including cost and
conveyance of all materials like cement, sand, water etc., to site
and all operational, incidental charges on materials and
including cost of all labour charges for mixing mortar, finishing,
scaffolding, lift charges, curing, including cutting grooves as
directed by Engineer - in - charge etc., and overheads &
contractors profit complete for finished item of work. (SS
901,903 & 904) For Internal Walls
Third Floor :
2936 Plastering 12mm thick in two coats using screened sand with Plastering 12mm thick in two coats Plastering 12mm thick in two coats
base coat of 8mm thick in CM (1:6) and top coat of 4mm thick in
CM (1:4) with dubara sponge finishing including cost and
conveyance of all materials like cement, sand, water etc., to site
and all operational, incidental charges on materials and
including cost of all labour charges for mixing mortar, finishing,
scaffolding, lift charges, curing, including cutting grooves as
directed by Engineer - in - charge etc., and overheads &
contractors profit complete for finished item of work. (SS
901,903 & 904) For Internal Walls
Fourth Floor :
407 Plastering 12mm thick in two coats using screened sand with Plastering 12mm thick in two coats Plastering 12mm thick in two coats
base coat of 8mm thick in CM (1:6) and top coat of 4mm thick in
CM (1:4) with dubara sponge finishing including cost and
conveyance of all materials like cement, sand, water etc., to site
and all operational, incidental charges on materials and
including cost of all labour charges for mixing mortar, finishing,
scaffolding, lift charges, curing, including cutting grooves as
directed by Engineer - in - charge etc., and overheads &
contractors profit complete for finished item of work. (SS
901,903 & 904) For Internal Walls
Fifth Floor :
1658 Plastering 20mm thick in two coats using screened sand with Plastering 20mm thick in two coats Plastering 20mm thick in two coats
base coat of 16mm thick in CM(1:6) and top coat of 4mm thick
in CM(1:4) with dubara sponge finishing including cost and
conveyance of all materials like cement, sand, water etc., to site
and all operational, incidental charges on materials and
including cost of all labour charges for mixing mortar, finishing,
scaffolding, lift charges, curing, including cutting grooves as
directed by Engineer-in-charge etc., and overheads &
contractors profit complete for finished item of work .(SS
901,903 & 904)
For Internal Walls & External Walls
Cellar :
4082 Plastering 20mm thick in two coats using screened sand with Plastering 20mm thick in two coats Plastering 20mm thick in two coats
base coat of 16mm thick in CM(1:6) and top coat of 4mm thick
in CM(1:4) with dubara sponge finishing including cost and
conveyance of all materials like cement, sand, water etc., to site
and all operational, incidental charges on materials and
including cost of all labour charges for mixing mortar, finishing,
scaffolding, lift charges, curing, including cutting grooves as
directed by Engineer-in-charge etc., and overheads &
contractors profit complete for finished item of work .(SS
901,903 & 904)
For Internal Walls & External Walls
Basement Floor
4227 Plastering 20mm thick in two coats using screened sand with Plastering 20mm thick in two coats Plastering 20mm thick in two coats
base coat of 16mm thick in CM(1:6) and top coat of 4mm thick
in CM(1:4) with dubara sponge finishing including cost and
conveyance of all materials like cement, sand, water etc., to site
and all operational, incidental charges on materials and
including cost of all labour charges for mixing mortar, finishing,
scaffolding, lift charges, curing, including cutting grooves as
directed by Engineer-in-charge etc., and overheads &
contractors profit complete for finished item of work .(SS
901,903 & 904)
For Internal Walls & External Walls
First Floor :
3781 Plastering 20mm thick in two coats using screened sand with Plastering 20mm thick in two coats Plastering 20mm thick in two coats
base coat of 16mm thick in CM(1:6) and top coat of 4mm thick
in CM(1:4) with dubara sponge finishing including cost and
conveyance of all materials like cement, sand, water etc., to site
and all operational, incidental charges on materials and
including cost of all labour charges for mixing mortar, finishing,
scaffolding, lift charges, curing, including cutting grooves as
directed by Engineer-in-charge etc., and overheads &
contractors profit complete for finished item of work .(SS
901,903 & 904)
For Internal Walls & External Walls
Second Floor :
4956 Plastering 20mm thick in two coats using screened sand with Plastering 20mm thick in two coats Plastering 20mm thick in two coats
base coat of 16mm thick in CM(1:6) and top coat of 4mm thick
in CM(1:4) with dubara sponge finishing including cost and
conveyance of all materials like cement, sand, water etc., to site
and all operational, incidental charges on materials and
including cost of all labour charges for mixing mortar, finishing,
scaffolding, lift charges, curing, including cutting grooves as
directed by Engineer-in-charge etc., and overheads &
contractors profit complete for finished item of work .(SS
901,903 & 904)
For Internal Walls & External Walls
Third Floor :
4269 Plastering 20mm thick in two coats using screened sand with Plastering 20mm thick in two coats Plastering 20mm thick in two coats
base coat of 16mm thick in CM(1:6) and top coat of 4mm thick
in CM(1:4) with dubara sponge finishing including cost and
conveyance of all materials like cement, sand, water etc., to site
and all operational, incidental charges on materials and
including cost of all labour charges for mixing mortar, finishing,
scaffolding, lift charges, curing, including cutting grooves as
directed by Engineer-in-charge etc., and overheads &
contractors profit complete for finished item of work .(SS
901,903 & 904)
For Internal Walls & External Walls
Fourth Floor :
1419 Plastering 20mm thick in two coats using screened sand with Plastering 20mm thick in two coats Plastering 20mm thick in two coats
base coat of 16mm thick in CM(1:6) and top coat of 4mm thick
in CM(1:4) with dubara sponge finishing including cost and
conveyance of all materials like cement, sand, water etc., to site
and all operational, incidental charges on materials and
including cost of all labour charges for mixing mortar, finishing,
scaffolding, lift charges, curing, including cutting grooves as
directed by Engineer-in-charge etc., and overheads &
contractors profit complete for finished item of work .(SS
901,903 & 904)
For Internal Walls & External Walls
Fifth Floor :
#REF! Plastering 12mm thick single coat in CM(1:5) using Plastering 12mm thick single coat in Plastering 12mm thick single coat in
screened sand including cost and conveyance of all materials CM(1:5) CM(1:5)
like cement, sand, water etc., to site and all operational,
incidental charges on materials and including cost of all labour
charges for mixing mortar, finishing, curing as directed by
Engineer-in-charge etc., and overheads & contractors profit
complete for finished item of work.(SS 901,903 & 904)
78 Flooring with non-skid white full body Ceramic floor tiles of size Flooring with non-skid white full Flooring with non-skid white full body
300 mm x 300 mm and thickness between 7-8 mm 1st quality body Ceramic floor tiles of size 300 Ceramic floor tiles of size 300 mm x
conforming to IS:13711, IS:13712, IS:13630 (Parts 1 to 15) of mm x 300 mm 300 mm
any colour and finish in all shades and designs as approved by
Engineer-in-charge, set over base coat of cement mortar (1:8),
12mm thick using screened sand over CC bed already laid or
RCC roof slab, including neat cement slurry of honey like
consistency spread @ 3.3 Kgs per sqm & jointed neatly with
white cement paste to full depth mixed with pigment of matching
shade, including cost of all materials like cement, screened
sand , water and tiles etc., and overheads & contractors profit
complete for finished item of work. (APSS No.701 & 707) For
Toilets
Cellar :
249 Flooring with non-skid white full body Ceramic floor tiles of size Flooring with non-skid white full Flooring with non-skid white full body
300 mm x 300 mm and thickness between 7-8 mm 1st quality body Ceramic floor tiles of size 300 Ceramic floor tiles of size 300 mm x
conforming to IS:13711, IS:13712, IS:13630 (Parts 1 to 15) of mm x 300 mm 300 mm
any colour and finish in all shades and designs as approved by
Engineer-in-charge, set over base coat of cement mortar (1:8),
12mm thick using screened sand over CC bed already laid or
RCC roof slab, including neat cement slurry of honey like
consistency spread @ 3.3 Kgs per sqm & jointed neatly with
white cement paste to full depth mixed with pigment of matching
shade, including cost of all materials like cement, screened
sand , water and tiles etc., and overheads & contractors profit
complete for finished item of work. (APSS No.701 & 707) For
Toilets
Basement Floor
312 Flooring with non-skid white full body Ceramic floor tiles of size Flooring with non-skid white full Flooring with non-skid white full body
300 mm x 300 mm and thickness between 7-8 mm 1st quality body Ceramic floor tiles of size 300 Ceramic floor tiles of size 300 mm x
conforming to IS:13711, IS:13712, IS:13630 (Parts 1 to 15) of mm x 300 mm 300 mm
any colour and finish in all shades and designs as approved by
Engineer-in-charge, set over base coat of cement mortar (1:8),
12mm thick using screened sand over CC bed already laid or
RCC roof slab, including neat cement slurry of honey like
consistency spread @ 3.3 Kgs per sqm & jointed neatly with
white cement paste to full depth mixed with pigment of matching
shade, including cost of all materials like cement, screened
sand , water and tiles etc., and overheads & contractors profit
complete for finished item of work. (APSS No.701 & 707) For
Toilets
First Floor :
180 Flooring with non-skid white full body Ceramic floor tiles of size Flooring with non-skid white full Flooring with non-skid white full body
300 mm x 300 mm and thickness between 7-8 mm 1st quality body Ceramic floor tiles of size 300 Ceramic floor tiles of size 300 mm x
conforming to IS:13711, IS:13712, IS:13630 (Parts 1 to 15) of mm x 300 mm 300 mm
any colour and finish in all shades and designs as approved by
Engineer-in-charge, set over base coat of cement mortar (1:8),
12mm thick using screened sand over CC bed already laid or
RCC roof slab, including neat cement slurry of honey like
consistency spread @ 3.3 Kgs per sqm & jointed neatly with
white cement paste to full depth mixed with pigment of matching
shade, including cost of all materials like cement, screened
sand , water and tiles etc., and overheads & contractors profit
complete for finished item of work. (APSS No.701 & 707) For
Toilets
Second Floor :
100 Flooring with non-skid white full body Ceramic floor tiles of size Flooring with non-skid white full Flooring with non-skid white full body
300 mm x 300 mm and thickness between 7-8 mm 1st quality body Ceramic floor tiles of size 300 Ceramic floor tiles of size 300 mm x
conforming to IS:13711, IS:13712, IS:13630 (Parts 1 to 15) of mm x 300 mm 300 mm
any colour and finish in all shades and designs as approved by
Engineer-in-charge, set over base coat of cement mortar (1:8),
12mm thick using screened sand over CC bed already laid or
RCC roof slab, including neat cement slurry of honey like
consistency spread @ 3.3 Kgs per sqm & jointed neatly with
white cement paste to full depth mixed with pigment of matching
shade, including cost of all materials like cement, screened
sand , water and tiles etc., and overheads & contractors profit
complete for finished item of work. (APSS No.701 & 707) For
Toilets
Third Floor :
130 Flooring with non-skid white full body Ceramic floor tiles of size Flooring with non-skid white full Flooring with non-skid white full body
300 mm x 300 mm and thickness between 7-8 mm 1st quality body Ceramic floor tiles of size 300 Ceramic floor tiles of size 300 mm x
conforming to IS:13711, IS:13712, IS:13630 (Parts 1 to 15) of mm x 300 mm 300 mm
any colour and finish in all shades and designs as approved by
Engineer-in-charge, set over base coat of cement mortar (1:8),
12mm thick using screened sand over CC bed already laid or
RCC roof slab, including neat cement slurry of honey like
consistency spread @ 3.3 Kgs per sqm & jointed neatly with
white cement paste to full depth mixed with pigment of matching
shade, including cost of all materials like cement, screened
sand , water and tiles etc., and overheads & contractors profit
complete for finished item of work. (APSS No.701 & 707) For
Toilets
Fourth Floor :
369 Flooring with non-skid Double charged / multi charged stain free Flooring with non-skid Double Flooring with non-skid Double charged
full body porcelain vitrified tiles with double layer pigment of charged / multi charged stain free / multi charged stain free full body
Size 600 x 600 mm and thickness between 8-10 mm 1st quality full body porcelain vitrified tiles with porcelain vitrified tiles with double layer
conforming to IS:13711, IS:13712, IS:13630 (Parts 1 to 15) of double layer pigment of Size 600 x pigment of Size 600 x 600 mm
any colour and finish in all shades and designs with borders and 600 mm
design as per the approved flooring pattern as directed by the
Engineer-In -Charge, laying tiles using spacers of 2mm thick,
set over a base coat of CM (1:8) prop. 12mm thick using
screened sand over CC bed already laid or RCC roof slab ,
including neat cement slurry of honey like consistancy spread
@ 3.3 kgs per sqm. and jointed neately with white cement
paste to full depth mixed with pigment of matching shade
including cost and conveyance of all materials like cement,
sand, water, tiles, white cement etc., to site (excluding cost of
C.C. bed) including cost of base coat and all labour charges
for mixing of cement mortar, laying tiles to required slope as
directed by the Engineer- in-charge etc.,and overheads &
contractors profit complete for finished item of work. (APSS
No.701 & 707)
Cellar :
1444 Flooring with non-skid Double charged / multi charged stain free Flooring with non-skid Double Flooring with non-skid Double charged
full body porcelain vitrified tiles with double layer pigment of charged / multi charged stain free / multi charged stain free full body
Size 600 x 600 mm and thickness between 8-10 mm 1st quality full body porcelain vitrified tiles with porcelain vitrified tiles with double layer
conforming to IS:13711, IS:13712, IS:13630 (Parts 1 to 15) of double layer pigment of Size 600 x pigment of Size 600 x 600 mm
any colour and finish in all shades and designs with borders and 600 mm
design as per the approved flooring pattern as directed by the
Engineer-In -Charge, laying tiles using spacers of 2mm thick,
set over a base coat of CM (1:8) prop. 12mm thick using
screened sand over CC bed already laid or RCC roof slab ,
including neat cement slurry of honey like consistancy spread
@ 3.3 kgs per sqm. and jointed neately with white cement
paste to full depth mixed with pigment of matching shade
including cost and conveyance of all materials like cement,
sand, water, tiles, white cement etc., to site (excluding cost of
C.C. bed) including cost of base coat and all labour charges
for mixing of cement mortar, laying tiles to required slope as
directed by the Engineer- in-charge etc.,and overheads &
contractors profit complete for finished item of work. (APSS
No.701 & 707)
Basement Floor
900 Flooring with non-skid Double charged / multi charged stain free Flooring with non-skid Double Flooring with non-skid Double charged
full body porcelain vitrified tiles with double layer pigment of charged / multi charged stain free / multi charged stain free full body
Size 600 x 600 mm and thickness between 8-10 mm 1st quality full body porcelain vitrified tiles with porcelain vitrified tiles with double layer
conforming to IS:13711, IS:13712, IS:13630 (Parts 1 to 15) of double layer pigment of Size 600 x pigment of Size 600 x 600 mm
any colour and finish in all shades and designs with borders and 600 mm
design as per the approved flooring pattern as directed by the
Engineer-In -Charge, laying tiles using spacers of 2mm thick,
set over a base coat of CM (1:8) prop. 12mm thick using
screened sand over CC bed already laid or RCC roof slab ,
including neat cement slurry of honey like consistancy spread
@ 3.3 kgs per sqm. and jointed neately with white cement
paste to full depth mixed with pigment of matching shade
including cost and conveyance of all materials like cement,
sand, water, tiles, white cement etc., to site (excluding cost of
C.C. bed) including cost of base coat and all labour charges
for mixing of cement mortar, laying tiles to required slope as
directed by the Engineer- in-charge etc.,and overheads &
contractors profit complete for finished item of work. (APSS
No.701 & 707)
First Floor :
2352 Flooring with non-skid Double charged / multi charged stain free Flooring with non-skid Double Flooring with non-skid Double charged
full body porcelain vitrified tiles with double layer pigment of charged / multi charged stain free / multi charged stain free full body
Size 600 x 600 mm and thickness between 8-10 mm 1st quality full body porcelain vitrified tiles with porcelain vitrified tiles with double layer
conforming to IS:13711, IS:13712, IS:13630 (Parts 1 to 15) of double layer pigment of Size 600 x pigment of Size 600 x 600 mm
any colour and finish in all shades and designs with borders and 600 mm
design as per the approved flooring pattern as directed by the
Engineer-In -Charge, laying tiles using spacers of 2mm thick,
set over a base coat of CM (1:8) prop. 12mm thick using
screened sand over CC bed already laid or RCC roof slab ,
including neat cement slurry of honey like consistancy spread
@ 3.3 kgs per sqm. and jointed neately with white cement
paste to full depth mixed with pigment of matching shade
including cost and conveyance of all materials like cement,
sand, water, tiles, white cement etc., to site (excluding cost of
C.C. bed) including cost of base coat and all labour charges
for mixing of cement mortar, laying tiles to required slope as
directed by the Engineer- in-charge etc.,and overheads &
contractors profit complete for finished item of work. (APSS
No.701 & 707)
Second Floor :
2403 Flooring with non-skid Double charged / multi charged stain free Flooring with non-skid Double Flooring with non-skid Double charged
full body porcelain vitrified tiles with double layer pigment of charged / multi charged stain free / multi charged stain free full body
Size 600 x 600 mm and thickness between 8-10 mm 1st quality full body porcelain vitrified tiles with porcelain vitrified tiles with double layer
conforming to IS:13711, IS:13712, IS:13630 (Parts 1 to 15) of double layer pigment of Size 600 x pigment of Size 600 x 600 mm
any colour and finish in all shades and designs with borders and 600 mm
design as per the approved flooring pattern as directed by the
Engineer-In -Charge, laying tiles using spacers of 2mm thick,
set over a base coat of CM (1:8) prop. 12mm thick using
screened sand over CC bed already laid or RCC roof slab ,
including neat cement slurry of honey like consistancy spread
@ 3.3 kgs per sqm. and jointed neately with white cement
paste to full depth mixed with pigment of matching shade
including cost and conveyance of all materials like cement,
sand, water, tiles, white cement etc., to site (excluding cost of
C.C. bed) including cost of base coat and all labour charges
for mixing of cement mortar, laying tiles to required slope as
directed by the Engineer- in-charge etc.,and overheads &
contractors profit complete for finished item of work. (APSS
No.701 & 707)
Third Floor :
2463 Flooring with non-skid Double charged / multi charged stain free Flooring with non-skid Double Flooring with non-skid Double charged
full body porcelain vitrified tiles with double layer pigment of charged / multi charged stain free / multi charged stain free full body
Size 600 x 600 mm and thickness between 8-10 mm 1st quality full body porcelain vitrified tiles with porcelain vitrified tiles with double layer
conforming to IS:13711, IS:13712, IS:13630 (Parts 1 to 15) of double layer pigment of Size 600 x pigment of Size 600 x 600 mm
any colour and finish in all shades and designs with borders and 600 mm
design as per the approved flooring pattern as directed by the
Engineer-In -Charge, laying tiles using spacers of 2mm thick,
set over a base coat of CM (1:8) prop. 12mm thick using
screened sand over CC bed already laid or RCC roof slab ,
including neat cement slurry of honey like consistancy spread
@ 3.3 kgs per sqm. and jointed neately with white cement
paste to full depth mixed with pigment of matching shade
including cost and conveyance of all materials like cement,
sand, water, tiles, white cement etc., to site (excluding cost of
C.C. bed) including cost of base coat and all labour charges
for mixing of cement mortar, laying tiles to required slope as
directed by the Engineer- in-charge etc.,and overheads &
contractors profit complete for finished item of work. (APSS
No.701 & 707)
Fourth Floor :
144 Flooring with 16 mm to 18 mm thick high polished granite stone Flooring with 16 mm to 18 mm thick Flooring with 16 mm to 18 mm thick
slabs other than black and regular colours (i.e. of shades like high polished granite stone slabs high polished granite stone slabs other
paradiso / bala flower / copper silk / laka red / lavender blue) other than black than black
with borders and design as per the pattern approved by the
Engineer-in-Charge of length not less than 2.43 mts set over
base coat of cement mortar (1:8) , 20mm thick using screened
sand over CC bed already laid or RCC roof slab including neat
grey cement slurry of honey like consistency spread @ 3.3 Kg
per sqm and jointed neatly with white cement paste mixed with
pigment of matching shade to full depth including cost and
conveyance of all materials like cement , sand , water , granite
slabs etc., to work site and all operational, incidental labour & lift
charges, polishing charges, cost of base coat and overheads &
contractors profit complete for finished item of work (S.S.701 &
special)
Cellar :
986 Flooring with 16 mm to 18 mm thick high polished granite stone Flooring with 16 mm to 18 mm thick Flooring with 16 mm to 18 mm thick
slabs other than black and regular colours (i.e. of shades like high polished granite stone slabs high polished granite stone slabs other
paradiso / bala flower / copper silk / laka red / lavender blue) other than black than black
with borders and design as per the pattern approved by the
Engineer-in-Charge of length not less than 2.43 mts set over
base coat of cement mortar (1:8) , 20mm thick using screened
sand over CC bed already laid or RCC roof slab including neat
grey cement slurry of honey like consistency spread @ 3.3 Kg
per sqm and jointed neatly with white cement paste mixed with
pigment of matching shade to full depth including cost and
conveyance of all materials like cement , sand , water , granite
slabs etc., to work site and all operational, incidental labour & lift
charges, polishing charges, cost of base coat and overheads &
contractors profit complete for finished item of work (S.S.701 &
special)
Basement Floor
1367 Flooring with 16 mm to 18 mm thick high polished granite stone Flooring with 16 mm to 18 mm thick Flooring with 16 mm to 18 mm thick
slabs other than black and regular colours (i.e. of shades like high polished granite stone slabs high polished granite stone slabs other
paradiso / bala flower / copper silk / laka red / lavender blue) other than black than black
with borders and design as per the pattern approved by the
Engineer-in-Charge of length not less than 2.43 mts set over
base coat of cement mortar (1:8) , 20mm thick using screened
sand over CC bed already laid or RCC roof slab including neat
grey cement slurry of honey like consistency spread @ 3.3 Kg
per sqm and jointed neatly with white cement paste mixed with
pigment of matching shade to full depth including cost and
conveyance of all materials like cement , sand , water , granite
slabs etc., to work site and all operational, incidental labour & lift
charges, polishing charges, cost of base coat and overheads &
contractors profit complete for finished item of work (S.S.701 &
special)
First Floor :
112 Flooring with 16 mm to 18 mm thick high polished granite stone Flooring with 16 mm to 18 mm thick Flooring with 16 mm to 18 mm thick
slabs other than black and regular colours (i.e. of shades like high polished granite stone slabs high polished granite stone slabs other
paradiso / bala flower / copper silk / laka red / lavender blue) other than black than black
with borders and design as per the pattern approved by the
Engineer-in-Charge of length not less than 2.43 mts set over
base coat of cement mortar (1:8) , 20mm thick using screened
sand over CC bed already laid or RCC roof slab including neat
grey cement slurry of honey like consistency spread @ 3.3 Kg
per sqm and jointed neatly with white cement paste mixed with
pigment of matching shade to full depth including cost and
conveyance of all materials like cement , sand , water , granite
slabs etc., to work site and all operational, incidental labour & lift
charges, polishing charges, cost of base coat and overheads &
contractors profit complete for finished item of work (S.S.701 &
special)
Second Floor :
43 Flooring with 16 mm to 18 mm thick high polished granite stone Flooring with 16 mm to 18 mm thick Flooring with 16 mm to 18 mm thick
slabs other than black and regular colours (i.e. of shades like high polished granite stone slabs high polished granite stone slabs other
paradiso / bala flower / copper silk / laka red / lavender blue) other than black than black
with borders and design as per the pattern approved by the
Engineer-in-Charge of length not less than 2.43 mts set over
base coat of cement mortar (1:8) , 20mm thick using screened
sand over CC bed already laid or RCC roof slab including neat
grey cement slurry of honey like consistency spread @ 3.3 Kg
per sqm and jointed neatly with white cement paste mixed with
pigment of matching shade to full depth including cost and
conveyance of all materials like cement , sand , water , granite
slabs etc., to work site and all operational, incidental labour & lift
charges, polishing charges, cost of base coat and overheads &
contractors profit complete for finished item of work (S.S.701 &
special)
Third Floor :
43 Flooring with 16 mm to 18 mm thick high polished granite stone Flooring with 16 mm to 18 mm thick Flooring with 16 mm to 18 mm thick
slabs other than black and regular colours (i.e. of shades like high polished granite stone slabs high polished granite stone slabs other
paradiso / bala flower / copper silk / laka red / lavender blue) other than black than black
with borders and design as per the pattern approved by the
Engineer-in-Charge of length not less than 2.43 mts set over
base coat of cement mortar (1:8) , 20mm thick using screened
sand over CC bed already laid or RCC roof slab including neat
grey cement slurry of honey like consistency spread @ 3.3 Kg
per sqm and jointed neatly with white cement paste mixed with
pigment of matching shade to full depth including cost and
conveyance of all materials like cement , sand , water , granite
slabs etc., to work site and all operational, incidental labour & lift
charges, polishing charges, cost of base coat and overheads &
contractors profit complete for finished item of work (S.S.701 &
special)
Fourth Floor :
102 Flooring with chequered Cement Concrete heavy duty tiles Flooring with chequered Cement Flooring with chequered Cement
conforming to IS: 13801 using aggregates, cement, pigments of Concrete heavy duty tiles Concrete heavy duty tiles
size 300mm x 300 mm and thickness 25 mm of any shades as
approved by Engineer - In - Charge set over base coat of
cement mortar (1:6), 12 mm thick using screened sand over CC
bed alredy laid or RCC roof slab including neat cement slurry of
honey like consistency spread @ 3.3 kgs per sqm and jointed
with neat white cement to full depth mixed with pigment of
matching shade including cost and conveyance of all materials
like cement, sand, water and tiles etc.,and overheads &
contractors profit complete for finished item of work.
Cellar :
102 Flooring with chequered Cement Concrete heavy duty tiles Flooring with chequered Cement Flooring with chequered Cement
conforming to IS: 13801 using aggregates, cement, pigments of Concrete heavy duty tiles Concrete heavy duty tiles
size 300mm x 300 mm and thickness 25 mm of any shades as
approved by Engineer - In - Charge set over base coat of
cement mortar (1:6), 12 mm thick using screened sand over CC
bed alredy laid or RCC roof slab including neat cement slurry of
honey like consistency spread @ 3.3 kgs per sqm and jointed
with neat white cement to full depth mixed with pigment of
matching shade including cost and conveyance of all materials
like cement, sand, water and tiles etc.,and overheads &
contractors profit complete for finished item of work.
Basement Floor
277 Flooring with chequered Cement Concrete heavy duty tiles Flooring with chequered Cement Flooring with chequered Cement
conforming to IS: 13801 using aggregates, cement, pigments of Concrete heavy duty tiles Concrete heavy duty tiles
size 300mm x 300 mm and thickness 25 mm of any shades as
approved by Engineer - In - Charge set over base coat of
cement mortar (1:6), 12 mm thick using screened sand over CC
bed alredy laid or RCC roof slab including neat cement slurry of
honey like consistency spread @ 3.3 kgs per sqm and jointed
with neat white cement to full depth mixed with pigment of
matching shade including cost and conveyance of all materials
like cement, sand, water and tiles etc.,and overheads &
contractors profit complete for finished item of work.
First Floor :
102 Flooring with chequered Cement Concrete heavy duty tiles Flooring with chequered Cement Flooring with chequered Cement
conforming to IS: 13801 using aggregates, cement, pigments of Concrete heavy duty tiles Concrete heavy duty tiles
size 300mm x 300 mm and thickness 25 mm of any shades as
approved by Engineer - In - Charge set over base coat of
cement mortar (1:6), 12 mm thick using screened sand over CC
bed alredy laid or RCC roof slab including neat cement slurry of
honey like consistency spread @ 3.3 kgs per sqm and jointed
with neat white cement to full depth mixed with pigment of
matching shade including cost and conveyance of all materials
like cement, sand, water and tiles etc.,and overheads &
contractors profit complete for finished item of work.
Second Floor :
104 Flooring with chequered Cement Concrete heavy duty tiles Flooring with chequered Cement Flooring with chequered Cement
conforming to IS: 13801 using aggregates, cement, pigments of Concrete heavy duty tiles Concrete heavy duty tiles
size 300mm x 300 mm and thickness 25 mm of any shades as
approved by Engineer - In - Charge set over base coat of
cement mortar (1:6), 12 mm thick using screened sand over CC
bed alredy laid or RCC roof slab including neat cement slurry of
honey like consistency spread @ 3.3 kgs per sqm and jointed
with neat white cement to full depth mixed with pigment of
matching shade including cost and conveyance of all materials
like cement, sand, water and tiles etc.,and overheads &
contractors profit complete for finished item of work.
Third Floor :
104 Flooring with chequered Cement Concrete heavy duty tiles Flooring with chequered Cement Flooring with chequered Cement
conforming to IS: 13801 using aggregates, cement, pigments of Concrete heavy duty tiles Concrete heavy duty tiles
size 300mm x 300 mm and thickness 25 mm of any shades as
approved by Engineer - In - Charge set over base coat of
cement mortar (1:6), 12 mm thick using screened sand over CC
bed alredy laid or RCC roof slab including neat cement slurry of
honey like consistency spread @ 3.3 kgs per sqm and jointed
with neat white cement to full depth mixed with pigment of
matching shade including cost and conveyance of all materials
like cement, sand, water and tiles etc.,and overheads &
contractors profit complete for finished item of work.
Fourth Floor :
298 Supply of precast concrete blocks for paving of M-40 grade and Supply of precast concrete blocks Supply of precast concrete blocks for
thickness not less than 80 mm for Medium traffic areas for paving of M-40 grade paving of M-40 grade
conforming to IS 15658:2006 in all shapes and designs as per
the manufacturer's specification including cost and conveyance
of all materials and all labour charges etc.
Cellar, Basement Floor & First Floors
1144 Vaccum dewatering cement concrete flooring 50mm thick using Vaccum dewatering cement Vaccum dewatering cement concrete
M 30 grade design mix corresponding to IS 456 with minimum concrete flooring 50mm thick flooring 50mm thick
cement content of 400 kgs per 1 cum of concrete and required
quantity of Chemical Admixtures per 1 cum of concrete using
WEIGH BATCHER / MIXER with 20mm size graded machine
crushed hard granite metal (coarse aggregate - as per IS 383 -
1970 and IS 2386 Part 1 to Part 8) from approved quarry in
panels as per drawing / design, laid to proper level and slope
including consolidating with power driven mechanical vibrators
(both needle & screed vibrators), dewatering by vacuum
process "Tremix" method, floated with neat cement and power
troweled to achieve smooth finishing, including MS Shuttering,
finishing, rounding of the edges, curing including cost and
conveyance of all materials like cement, coarse aggregate,
sand etc., to site, centering, shuttering, machine mixing, laying
concrete, vibrating, curing, hire charges of all tools and plants,
all other incidental and operational charges, labour charges and
all taxes etc., complete for finished item of work but excluding
cost of steel and its fabrication charges for finished item of work.
For Cellar
43 Providing 16 mm to 18 mm thick high polished leather finish Providing 16 mm to 18 mm thick Providing 16 mm to 18 mm thick high
granite stone slabs (steel grey or pearl black) with borders and high polished leather finish granite polished leather finish granite stone
design as per the pattern approved by the Engineer-in-Charge stone slabs for Treads & Risers slabs for Treads & Risers
of length not less than 2.43 mts set over base coat of cement
mortar (1:5) , 12mm thick using screened sand over CC bed
already laid or RCC roof slab including neat grey cement slurry
of honey like consistency spread @ 3.3 Kg per sqm and jointed
neatly with white cement paste mixed with pigment of matching
shade to full depth including cost and conveyance of all
materials like cement , sand , water , granite slabs etc., to work
site and all operational, incidental labour & lift charges, full
rounding the edges of treads , polishing charges, cost of base
coat and overheads & contractors profit complete for finished
item of work for treads and risers (S.S.701 & special)
Treads of 0.30m wide :
Cellar :
82 Providing 16 mm to 18 mm thick high polished leather finish Providing 16 mm to 18 mm thick Providing 16 mm to 18 mm thick high
granite stone slabs (steel grey or pearl black) with borders and high polished leather finish granite polished leather finish granite stone
design as per the pattern approved by the Engineer-in-Charge stone slabs for Treads & Risers slabs for Treads & Risers
of length not less than 2.43 mts set over base coat of cement
mortar (1:5) , 12mm thick using screened sand over CC bed
already laid or RCC roof slab including neat grey cement slurry
of honey like consistency spread @ 3.3 Kg per sqm and jointed
neatly with white cement paste mixed with pigment of matching
shade to full depth including cost and conveyance of all
materials like cement , sand , water , granite slabs etc., to work
site and all operational, incidental labour & lift charges, full
rounding the edges of treads , polishing charges, cost of base
coat and overheads & contractors profit complete for finished
item of work for treads and risers (S.S.701 & special)
Treads of 0.30m wide :
Basement Floor
77 Providing 16 mm to 18 mm thick high polished leather finish Providing 16 mm to 18 mm thick Providing 16 mm to 18 mm thick high
granite stone slabs (steel grey or pearl black) with borders and high polished leather finish granite polished leather finish granite stone
design as per the pattern approved by the Engineer-in-Charge stone slabs for Treads & Risers slabs for Treads & Risers
of length not less than 2.43 mts set over base coat of cement
mortar (1:5) , 12mm thick using screened sand over CC bed
already laid or RCC roof slab including neat grey cement slurry
of honey like consistency spread @ 3.3 Kg per sqm and jointed
neatly with white cement paste mixed with pigment of matching
shade to full depth including cost and conveyance of all
materials like cement , sand , water , granite slabs etc., to work
site and all operational, incidental labour & lift charges, full
rounding the edges of treads , polishing charges, cost of base
coat and overheads & contractors profit complete for finished
item of work for treads and risers (S.S.701 & special)
Treads of 0.30m wide :
First Floor :
82 Providing 16 mm to 18 mm thick high polished leather finish Providing 16 mm to 18 mm thick Providing 16 mm to 18 mm thick high
granite stone slabs (steel grey or pearl black) with borders and high polished leather finish granite polished leather finish granite stone
design as per the pattern approved by the Engineer-in-Charge stone slabs for Treads & Risers slabs for Treads & Risers
of length not less than 2.43 mts set over base coat of cement
mortar (1:5) , 12mm thick using screened sand over CC bed
already laid or RCC roof slab including neat grey cement slurry
of honey like consistency spread @ 3.3 Kg per sqm and jointed
neatly with white cement paste mixed with pigment of matching
shade to full depth including cost and conveyance of all
materials like cement , sand , water , granite slabs etc., to work
site and all operational, incidental labour & lift charges, full
rounding the edges of treads , polishing charges, cost of base
coat and overheads & contractors profit complete for finished
item of work for treads and risers (S.S.701 & special)
Treads of 0.30m wide :
Second Floor :
78 Providing 16 mm to 18 mm thick high polished leather finish Providing 16 mm to 18 mm thick Providing 16 mm to 18 mm thick high
granite stone slabs (steel grey or pearl black) with borders and high polished leather finish granite polished leather finish granite stone
design as per the pattern approved by the Engineer-in-Charge stone slabs for Treads & Risers slabs for Treads & Risers
of length not less than 2.43 mts set over base coat of cement
mortar (1:5) , 12mm thick using screened sand over CC bed
already laid or RCC roof slab including neat grey cement slurry
of honey like consistency spread @ 3.3 Kg per sqm and jointed
neatly with white cement paste mixed with pigment of matching
shade to full depth including cost and conveyance of all
materials like cement , sand , water , granite slabs etc., to work
site and all operational, incidental labour & lift charges, full
rounding the edges of treads , polishing charges, cost of base
coat and overheads & contractors profit complete for finished
item of work for treads and risers (S.S.701 & special)
Treads of 0.30m wide :
Third Floor :
66 Providing 16 mm to 18 mm thick high polished leather finish Providing 16 mm to 18 mm thick Providing 16 mm to 18 mm thick high
granite stone slabs (steel grey or pearl black) with borders and high polished leather finish granite polished leather finish granite stone
design as per the pattern approved by the Engineer-in-Charge stone slabs for Treads & Risers slabs for Treads & Risers
of length not less than 2.43 mts set over base coat of cement
mortar (1:5) , 12mm thick using screened sand over CC bed
already laid or RCC roof slab including neat grey cement slurry
of honey like consistency spread @ 3.3 Kg per sqm and jointed
neatly with white cement paste mixed with pigment of matching
shade to full depth including cost and conveyance of all
materials like cement , sand , water , granite slabs etc., to work
site and all operational, incidental labour & lift charges, full
rounding the edges of treads , polishing charges, cost of base
coat and overheads & contractors profit complete for finished
item of work for treads and risers (S.S.701 & special)
Treads of 0.30m wide :
Fourth Floor :
24 Providing 16 mm to 18 mm thick high polished leather finish Providing 16 mm to 18 mm thick Providing 16 mm to 18 mm thick high
granite stone slabs (steel grey or pearl black) with borders and high polished leather finish granite polished leather finish granite stone
design as per the pattern approved by the Engineer-in-Charge stone slabs for Treads & Risers slabs for Treads & Risers
of length not less than 2.43 mts set over base coat of cement
mortar (1:5) , 12mm thick using screened sand over CC bed
already laid or RCC roof slab including neat grey cement slurry
of honey like consistency spread @ 3.3 Kg per sqm and jointed
neatly with white cement paste mixed with pigment of matching
shade to full depth including cost and conveyance of all
materials like cement , sand , water , granite slabs etc., to work
site and all operational, incidental labour & lift charges, full
rounding the edges of treads , polishing charges, cost of base
coat and overheads & contractors profit complete for finished
item of work for treads and risers (S.S.701 & special)
Risers of 0.15m height :
Cellar :
44 Providing 16 mm to 18 mm thick high polished leather finish Providing 16 mm to 18 mm thick Providing 16 mm to 18 mm thick high
granite stone slabs (steel grey or pearl black) with borders and high polished leather finish granite polished leather finish granite stone
design as per the pattern approved by the Engineer-in-Charge stone slabs for Treads & Risers slabs for Treads & Risers
of length not less than 2.43 mts set over base coat of cement
mortar (1:5) , 12mm thick using screened sand over CC bed
already laid or RCC roof slab including neat grey cement slurry
of honey like consistency spread @ 3.3 Kg per sqm and jointed
neatly with white cement paste mixed with pigment of matching
shade to full depth including cost and conveyance of all
materials like cement , sand , water , granite slabs etc., to work
site and all operational, incidental labour & lift charges, full
rounding the edges of treads , polishing charges, cost of base
coat and overheads & contractors profit complete for finished
item of work for treads and risers (S.S.701 & special)
Risers of 0.15m height :
Basement Floor
43 Providing 16 mm to 18 mm thick high polished leather finish Providing 16 mm to 18 mm thick Providing 16 mm to 18 mm thick high
granite stone slabs (steel grey or pearl black) with borders and high polished leather finish granite polished leather finish granite stone
design as per the pattern approved by the Engineer-in-Charge stone slabs for Treads & Risers slabs for Treads & Risers
of length not less than 2.43 mts set over base coat of cement
mortar (1:5) , 12mm thick using screened sand over CC bed
already laid or RCC roof slab including neat grey cement slurry
of honey like consistency spread @ 3.3 Kg per sqm and jointed
neatly with white cement paste mixed with pigment of matching
shade to full depth including cost and conveyance of all
materials like cement , sand , water , granite slabs etc., to work
site and all operational, incidental labour & lift charges, full
rounding the edges of treads , polishing charges, cost of base
coat and overheads & contractors profit complete for finished
item of work for treads and risers (S.S.701 & special)
Risers of 0.15m height :
First Floor :
44 Providing 16 mm to 18 mm thick high polished leather finish Providing 16 mm to 18 mm thick Providing 16 mm to 18 mm thick high
granite stone slabs (steel grey or pearl black) with borders and high polished leather finish granite polished leather finish granite stone
design as per the pattern approved by the Engineer-in-Charge stone slabs for Treads & Risers slabs for Treads & Risers
of length not less than 2.43 mts set over base coat of cement
mortar (1:5) , 12mm thick using screened sand over CC bed
already laid or RCC roof slab including neat grey cement slurry
of honey like consistency spread @ 3.3 Kg per sqm and jointed
neatly with white cement paste mixed with pigment of matching
shade to full depth including cost and conveyance of all
materials like cement , sand , water , granite slabs etc., to work
site and all operational, incidental labour & lift charges, full
rounding the edges of treads , polishing charges, cost of base
coat and overheads & contractors profit complete for finished
item of work for treads and risers (S.S.701 & special)
Risers of 0.15m height :
Second Floor :
42 Providing 16 mm to 18 mm thick high polished leather finish Providing 16 mm to 18 mm thick Providing 16 mm to 18 mm thick high
granite stone slabs (steel grey or pearl black) with borders and high polished leather finish granite polished leather finish granite stone
design as per the pattern approved by the Engineer-in-Charge stone slabs for Treads & Risers slabs for Treads & Risers
of length not less than 2.43 mts set over base coat of cement
mortar (1:5) , 12mm thick using screened sand over CC bed
already laid or RCC roof slab including neat grey cement slurry
of honey like consistency spread @ 3.3 Kg per sqm and jointed
neatly with white cement paste mixed with pigment of matching
shade to full depth including cost and conveyance of all
materials like cement , sand , water , granite slabs etc., to work
site and all operational, incidental labour & lift charges, full
rounding the edges of treads , polishing charges, cost of base
coat and overheads & contractors profit complete for finished
item of work for treads and risers (S.S.701 & special)
Risers of 0.15m height :
Third Floor :
36 Providing 16 mm to 18 mm thick high polished leather finish Providing 16 mm to 18 mm thick Providing 16 mm to 18 mm thick high
granite stone slabs (steel grey or pearl black) with borders and high polished leather finish granite polished leather finish granite stone
design as per the pattern approved by the Engineer-in-Charge stone slabs for Treads & Risers slabs for Treads & Risers
of length not less than 2.43 mts set over base coat of cement
mortar (1:5) , 12mm thick using screened sand over CC bed
already laid or RCC roof slab including neat grey cement slurry
of honey like consistency spread @ 3.3 Kg per sqm and jointed
neatly with white cement paste mixed with pigment of matching
shade to full depth including cost and conveyance of all
materials like cement , sand , water , granite slabs etc., to work
site and all operational, incidental labour & lift charges, full
rounding the edges of treads , polishing charges, cost of base
coat and overheads & contractors profit complete for finished
item of work for treads and risers (S.S.701 & special)
Risers of 0.15m height :
Fourth Floor :
9 Flooring with 16 mm to 18 mm thick high polished granite Flooring with 16 mm to 18 mm Flooring with 16 mm to 18 mm thick
stone slabs black colour as approved by the Engineer-in- thick high polished granite stone high polished granite stone slabs black
Charge of length not less than 2.43 mts set over base coat of slabs black
cement mortar (1:8) , 20mm thick using screened sand over CC
bed already laid or RCC roof slab including neat grey cement
slurry of honey like consistency spread @ 3.3 Kg per sqm and
jointed neatly with white cement paste mixed with pigment of
matching shade to full depth including cost and conveyance of
all materials like cement , sand , water , granite slabs etc., to
work site and all operational, incidental labour & lift charges,
half rounding the edge , polishing charges, cost of base coat
and overheads & contractors profit complete for finished item of
work for platforms (S.S.701 & special)
Cellar :
72 Flooring with 16 mm to 18 mm thick high polished granite Flooring with 16 mm to 18 mm Flooring with 16 mm to 18 mm thick
stone slabs black colour as approved by the Engineer-in- thick high polished granite stone high polished granite stone slabs black
Charge of length not less than 2.43 mts set over base coat of slabs black
cement mortar (1:8) , 20mm thick using screened sand over CC
bed already laid or RCC roof slab including neat grey cement
slurry of honey like consistency spread @ 3.3 Kg per sqm and
jointed neatly with white cement paste mixed with pigment of
matching shade to full depth including cost and conveyance of
all materials like cement , sand , water , granite slabs etc., to
work site and all operational, incidental labour & lift charges,
half rounding the edge , polishing charges, cost of base coat
and overheads & contractors profit complete for finished item of
work for platforms (S.S.701 & special)
Basement Floor
25 Flooring with 16 mm to 18 mm thick high polished granite Flooring with 16 mm to 18 mm Flooring with 16 mm to 18 mm thick
stone slabs black colour as approved by the Engineer-in- thick high polished granite stone high polished granite stone slabs black
Charge of length not less than 2.43 mts set over base coat of slabs black
cement mortar (1:8) , 20mm thick using screened sand over CC
bed already laid or RCC roof slab including neat grey cement
slurry of honey like consistency spread @ 3.3 Kg per sqm and
jointed neatly with white cement paste mixed with pigment of
matching shade to full depth including cost and conveyance of
all materials like cement , sand , water , granite slabs etc., to
work site and all operational, incidental labour & lift charges,
half rounding the edge , polishing charges, cost of base coat
and overheads & contractors profit complete for finished item of
work for platforms (S.S.701 & special)
First Floor :
27 Flooring with 16 mm to 18 mm thick high polished granite Flooring with 16 mm to 18 mm Flooring with 16 mm to 18 mm thick
stone slabs black colour as approved by the Engineer-in- thick high polished granite stone high polished granite stone slabs black
Charge of length not less than 2.43 mts set over base coat of slabs black
cement mortar (1:8) , 20mm thick using screened sand over CC
bed already laid or RCC roof slab including neat grey cement
slurry of honey like consistency spread @ 3.3 Kg per sqm and
jointed neatly with white cement paste mixed with pigment of
matching shade to full depth including cost and conveyance of
all materials like cement , sand , water , granite slabs etc., to
work site and all operational, incidental labour & lift charges,
half rounding the edge , polishing charges, cost of base coat
and overheads & contractors profit complete for finished item of
work for platforms (S.S.701 & special)
Second Floor :
14 Flooring with 16 mm to 18 mm thick high polished granite Flooring with 16 mm to 18 mm Flooring with 16 mm to 18 mm thick
stone slabs black colour as approved by the Engineer-in- thick high polished granite stone high polished granite stone slabs black
Charge of length not less than 2.43 mts set over base coat of slabs black
cement mortar (1:8) , 20mm thick using screened sand over CC
bed already laid or RCC roof slab including neat grey cement
slurry of honey like consistency spread @ 3.3 Kg per sqm and
jointed neatly with white cement paste mixed with pigment of
matching shade to full depth including cost and conveyance of
all materials like cement , sand , water , granite slabs etc., to
work site and all operational, incidental labour & lift charges,
half rounding the edge , polishing charges, cost of base coat
and overheads & contractors profit complete for finished item of
work for platforms (S.S.701 & special)
Third Floor :
161 Flooring with 16 mm to 18 mm thick high polished granite Flooring with 16 mm to 18 mm Flooring with 16 mm to 18 mm thick
stone slabs black colour as approved by the Engineer-in- thick high polished granite stone high polished granite stone slabs black
Charge of length not less than 2.43 mts set over base coat of slabs black
cement mortar (1:8) , 20mm thick using screened sand over CC
bed already laid or RCC roof slab including neat grey cement
slurry of honey like consistency spread @ 3.3 Kg per sqm and
jointed neatly with white cement paste mixed with pigment of
matching shade to full depth including cost and conveyance of
all materials like cement , sand , water , granite slabs etc., to
work site and all operational, incidental labour & lift charges,
half rounding the edge , polishing charges, cost of base coat
and overheads & contractors profit complete for finished item of
work for platforms (S.S.701 & special)
Fourth Floor :
11 Providing window sills with 16 mm to 18 mm thick high polished Providing window sills with 16 mm to Providing window sills with 16 mm to
granite stone slabs black colour as approved by the Engineer- 18 mm thick high polished granite 18 mm thick high polished granite
in-Charge set over base coat of cement mortar (1:8) , 20mm stone slabs black stone slabs black
thick using screened sand over CC bed already laid including
neat grey cement slurry of honey like consistency spread @ 3.3
Kg per sqm and jointed neatly with white cement paste mixed
with pigment of matching shade to full depth including cost and
conveyance of all materials like cement , sand , water , granite
slabs etc., to work site and all operational, incidental labour & lift
charges, half rounding the edge , polishing charges, cost of
base coat and overheads & contractors profit complete for
finished item of work (S.S.701 & special)
Cellar :
31 Providing window sills with 16 mm to 18 mm thick high polished Providing window sills with 16 mm to Providing window sills with 16 mm to
granite stone slabs black colour as approved by the Engineer- 18 mm thick high polished granite 18 mm thick high polished granite
in-Charge set over base coat of cement mortar (1:8) , 20mm stone slabs black stone slabs black
thick using screened sand over CC bed already laid including
neat grey cement slurry of honey like consistency spread @ 3.3
Kg per sqm and jointed neatly with white cement paste mixed
with pigment of matching shade to full depth including cost and
conveyance of all materials like cement , sand , water , granite
slabs etc., to work site and all operational, incidental labour & lift
charges, half rounding the edge , polishing charges, cost of
base coat and overheads & contractors profit complete for
finished item of work (S.S.701 & special)
Basement Floor
38 Providing window sills with 16 mm to 18 mm thick high polished Providing window sills with 16 mm to Providing window sills with 16 mm to
granite stone slabs black colour as approved by the Engineer- 18 mm thick high polished granite 18 mm thick high polished granite
in-Charge set over base coat of cement mortar (1:8) , 20mm stone slabs black stone slabs black
thick using screened sand over CC bed already laid including
neat grey cement slurry of honey like consistency spread @ 3.3
Kg per sqm and jointed neatly with white cement paste mixed
with pigment of matching shade to full depth including cost and
conveyance of all materials like cement , sand , water , granite
slabs etc., to work site and all operational, incidental labour & lift
charges, half rounding the edge , polishing charges, cost of
base coat and overheads & contractors profit complete for
finished item of work (S.S.701 & special)
First Floor :
75 Providing window sills with 16 mm to 18 mm thick high polished Providing window sills with 16 mm to Providing window sills with 16 mm to
granite stone slabs black colour as approved by the Engineer- 18 mm thick high polished granite 18 mm thick high polished granite
in-Charge set over base coat of cement mortar (1:8) , 20mm stone slabs black stone slabs black
thick using screened sand over CC bed already laid including
neat grey cement slurry of honey like consistency spread @ 3.3
Kg per sqm and jointed neatly with white cement paste mixed
with pigment of matching shade to full depth including cost and
conveyance of all materials like cement , sand , water , granite
slabs etc., to work site and all operational, incidental labour & lift
charges, half rounding the edge , polishing charges, cost of
base coat and overheads & contractors profit complete for
finished item of work (S.S.701 & special)
Second Floor :
40 Providing window sills with 16 mm to 18 mm thick high polished Providing window sills with 16 mm to Providing window sills with 16 mm to
granite stone slabs black colour as approved by the Engineer- 18 mm thick high polished granite 18 mm thick high polished granite
in-Charge set over base coat of cement mortar (1:8) , 20mm stone slabs black stone slabs black
thick using screened sand over CC bed already laid including
neat grey cement slurry of honey like consistency spread @ 3.3
Kg per sqm and jointed neatly with white cement paste mixed
with pigment of matching shade to full depth including cost and
conveyance of all materials like cement , sand , water , granite
slabs etc., to work site and all operational, incidental labour & lift
charges, half rounding the edge , polishing charges, cost of
base coat and overheads & contractors profit complete for
finished item of work (S.S.701 & special)
Third Floor :
66 Providing window sills with 16 mm to 18 mm thick high polished Providing window sills with 16 mm to Providing window sills with 16 mm to
granite stone slabs black colour as approved by the Engineer- 18 mm thick high polished granite 18 mm thick high polished granite
in-Charge set over base coat of cement mortar (1:8) , 20mm stone slabs black stone slabs black
thick using screened sand over CC bed already laid including
neat grey cement slurry of honey like consistency spread @ 3.3
Kg per sqm and jointed neatly with white cement paste mixed
with pigment of matching shade to full depth including cost and
conveyance of all materials like cement , sand , water , granite
slabs etc., to work site and all operational, incidental labour & lift
charges, half rounding the edge , polishing charges, cost of
base coat and overheads & contractors profit complete for
finished item of work (S.S.701 & special)
Fourth Floor :
314 Providing skirting 10 cm height with Double charged / multi Providing skirting 10 cm height with Providing skirting 10 cm height with
charged stain free full body porcelain vitrified tiles with double Double charged / multi charged Double charged / multi charged stain
layer pigment of Size 600 x 600 mm and thickness between 8- stain free full body porcelain vitrified free full body porcelain vitrified tiles
10 mm of any colour and finish in all shades and designs, length tiles
equal to flooring tiles, flushed to wall surface to set over base
coat of CM(1:5) 12 mm thick using screened sand with cement
slurry of honey like consistency spread at the rate of 3.30 kgs
per sqm and jointing with white cement paste mixed with
pigment of matching shade to full depth, including cost of all
materials like tiles, cement, sand and water etc.,and overheads
& contractors profit complete for finished item of work.(APSS
No.701 &707)
Cellar :
1488 Providing skirting 10 cm height with Double charged / multi Providing skirting 10 cm height with Providing skirting 10 cm height with
charged stain free full body porcelain vitrified tiles with double Double charged / multi charged Double charged / multi charged stain
layer pigment of Size 600 x 600 mm and thickness between 8- stain free full body porcelain vitrified free full body porcelain vitrified tiles
10 mm of any colour and finish in all shades and designs, length tiles
equal to flooring tiles, flushed to wall surface to set over base
coat of CM(1:5) 12 mm thick using screened sand with cement
slurry of honey like consistency spread at the rate of 3.30 kgs
per sqm and jointing with white cement paste mixed with
pigment of matching shade to full depth, including cost of all
materials like tiles, cement, sand and water etc.,and overheads
& contractors profit complete for finished item of work.(APSS
No.701 &707)
Basement Floor
912 Providing skirting 10 cm height with Double charged / multi Providing skirting 10 cm height with Providing skirting 10 cm height with
charged stain free full body porcelain vitrified tiles with double Double charged / multi charged Double charged / multi charged stain
layer pigment of Size 600 x 600 mm and thickness between 8- stain free full body porcelain vitrified free full body porcelain vitrified tiles
10 mm of any colour and finish in all shades and designs, length tiles
equal to flooring tiles, flushed to wall surface to set over base
coat of CM(1:5) 12 mm thick using screened sand with cement
slurry of honey like consistency spread at the rate of 3.30 kgs
per sqm and jointing with white cement paste mixed with
pigment of matching shade to full depth, including cost of all
materials like tiles, cement, sand and water etc.,and overheads
& contractors profit complete for finished item of work.(APSS
No.701 &707)
First Floor :
1110 Providing skirting 10 cm height with Double charged / multi Providing skirting 10 cm height with Providing skirting 10 cm height with
charged stain free full body porcelain vitrified tiles with double Double charged / multi charged Double charged / multi charged stain
layer pigment of Size 600 x 600 mm and thickness between 8- stain free full body porcelain vitrified free full body porcelain vitrified tiles
10 mm of any colour and finish in all shades and designs, length tiles
equal to flooring tiles, flushed to wall surface to set over base
coat of CM(1:5) 12 mm thick using screened sand with cement
slurry of honey like consistency spread at the rate of 3.30 kgs
per sqm and jointing with white cement paste mixed with
pigment of matching shade to full depth, including cost of all
materials like tiles, cement, sand and water etc.,and overheads
& contractors profit complete for finished item of work.(APSS
No.701 &707)
Second Floor :
1191 Providing skirting 10 cm height with Double charged / multi Providing skirting 10 cm height with Providing skirting 10 cm height with
charged stain free full body porcelain vitrified tiles with double Double charged / multi charged Double charged / multi charged stain
layer pigment of Size 600 x 600 mm and thickness between 8- stain free full body porcelain vitrified free full body porcelain vitrified tiles
10 mm of any colour and finish in all shades and designs, length tiles
equal to flooring tiles, flushed to wall surface to set over base
coat of CM(1:5) 12 mm thick using screened sand with cement
slurry of honey like consistency spread at the rate of 3.30 kgs
per sqm and jointing with white cement paste mixed with
pigment of matching shade to full depth, including cost of all
materials like tiles, cement, sand and water etc.,and overheads
& contractors profit complete for finished item of work.(APSS
No.701 &707)
Third Floor :
783 Providing skirting 10 cm height with Double charged / multi Providing skirting 10 cm height with Providing skirting 10 cm height with
charged stain free full body porcelain vitrified tiles with double Double charged / multi charged Double charged / multi charged stain
layer pigment of Size 600 x 600 mm and thickness between 8- stain free full body porcelain vitrified free full body porcelain vitrified tiles
10 mm of any colour and finish in all shades and designs, length tiles
equal to flooring tiles, flushed to wall surface to set over base
coat of CM(1:5) 12 mm thick using screened sand with cement
slurry of honey like consistency spread at the rate of 3.30 kgs
per sqm and jointing with white cement paste mixed with
pigment of matching shade to full depth, including cost of all
materials like tiles, cement, sand and water etc.,and overheads
& contractors profit complete for finished item of work.(APSS
No.701 &707)
Fourth Floor :
120 Providing skirting to internal walls 10 cm height with High Providing skirting to internal walls 10 Providing skirting to internal walls 10
Polished Granite 16 mm to 18 mm thick up to 8'-00 (2.43 M) cm height with High Polished cm height with High Polished Granite
other than black and regular colours, length equal to flooring Granite 16 mm to 18 mm thick up to 16 mm to 18 mm thick up to 8'-00
slabs set over base coat of CM(1:5) 12 mm thick using 8'-00
screened sand with cement slurry of honey like consistency
spread at the rate of 3.30 kgs per sqm and jointing with white
cement paste mixed with pigment of matching shade to full
depth, including cost of all materials like tiles, cement, sand and
water etc., and overheads & contractors profit complete for
finished item of work.
Cellar :
121 Providing skirting to internal walls 10 cm height with High Providing skirting to internal walls 10 Providing skirting to internal walls 10
Polished Granite 16 mm to 18 mm thick up to 8'-00 (2.43 M) cm height with High Polished cm height with High Polished Granite
other than black and regular colours, length equal to flooring Granite 16 mm to 18 mm thick up to 16 mm to 18 mm thick up to 8'-00
slabs set over base coat of CM(1:5) 12 mm thick using 8'-00
screened sand with cement slurry of honey like consistency
spread at the rate of 3.30 kgs per sqm and jointing with white
cement paste mixed with pigment of matching shade to full
depth, including cost of all materials like tiles, cement, sand and
water etc., and overheads & contractors profit complete for
finished item of work.
Basement Floor
78 Providing skirting to internal walls 10 cm height with High Providing skirting to internal walls 10 Providing skirting to internal walls 10
Polished Granite 16 mm to 18 mm thick up to 8'-00 (2.43 M) cm height with High Polished cm height with High Polished Granite
other than black and regular colours, length equal to flooring Granite 16 mm to 18 mm thick up to 16 mm to 18 mm thick up to 8'-00
slabs set over base coat of CM(1:5) 12 mm thick using 8'-00
screened sand with cement slurry of honey like consistency
spread at the rate of 3.30 kgs per sqm and jointing with white
cement paste mixed with pigment of matching shade to full
depth, including cost of all materials like tiles, cement, sand and
water etc., and overheads & contractors profit complete for
finished item of work.
First Floor :
121 Providing skirting to internal walls 10 cm height with High Providing skirting to internal walls 10 Providing skirting to internal walls 10
Polished Granite 16 mm to 18 mm thick up to 8'-00 (2.43 M) cm height with High Polished cm height with High Polished Granite
other than black and regular colours, length equal to flooring Granite 16 mm to 18 mm thick up to 16 mm to 18 mm thick up to 8'-00
slabs set over base coat of CM(1:5) 12 mm thick using 8'-00
screened sand with cement slurry of honey like consistency
spread at the rate of 3.30 kgs per sqm and jointing with white
cement paste mixed with pigment of matching shade to full
depth, including cost of all materials like tiles, cement, sand and
water etc., and overheads & contractors profit complete for
finished item of work.
Second Floor :
78 Providing skirting to internal walls 10 cm height with High Providing skirting to internal walls 10 Providing skirting to internal walls 10
Polished Granite 16 mm to 18 mm thick up to 8'-00 (2.43 M) cm height with High Polished cm height with High Polished Granite
other than black and regular colours, length equal to flooring Granite 16 mm to 18 mm thick up to 16 mm to 18 mm thick up to 8'-00
slabs set over base coat of CM(1:5) 12 mm thick using 8'-00
screened sand with cement slurry of honey like consistency
spread at the rate of 3.30 kgs per sqm and jointing with white
cement paste mixed with pigment of matching shade to full
depth, including cost of all materials like tiles, cement, sand and
water etc., and overheads & contractors profit complete for
finished item of work.
Third Floor :
78 Providing skirting to internal walls 10 cm height with High Providing skirting to internal walls 10 Providing skirting to internal walls 10
Polished Granite 16 mm to 18 mm thick up to 8'-00 (2.43 M) cm height with High Polished cm height with High Polished Granite
other than black and regular colours, length equal to flooring Granite 16 mm to 18 mm thick up to 16 mm to 18 mm thick up to 8'-00
slabs set over base coat of CM(1:5) 12 mm thick using 8'-00
screened sand with cement slurry of honey like consistency
spread at the rate of 3.30 kgs per sqm and jointing with white
cement paste mixed with pigment of matching shade to full
depth, including cost of all materials like tiles, cement, sand and
water etc., and overheads & contractors profit complete for
finished item of work.
Fourth Floor :
233 Providing dadooing with glazed white full body ceramic wall tiles Providing dadooing with glazed Providing dadooing with glazed white
of size 200mm x 300 mm / 245 mm x 325 mm and thickness 6 white full body ceramic wall tiles of full body ceramic wall tiles of size
mm 1st quality conforming to IS:13711, IS:13712, IS:13630 size 200mm x 300 mm / 245 mm x 200mm x 300 mm / 245 mm x 325 mm
(Parts 1 to 15) of any colour and finish in all shades and designs 325 mm
with borders as approved by Engineer-in-Charge flushed to
wall surface set over base coat of CM(1:5) 12 mm thick using
screened sand with cement slurry of honey like consistency
spread at the rate of 3.30 kgs per sqm and jointing with white
cement paste mixed with pigment of matching shade to full
depth, including cost of all materials like tiles, cement, sand and
water etc., and overheads & contractors profit complete for
finished item of work.
Cellar :
525 Providing dadooing with glazed white full body ceramic wall tiles Providing dadooing with glazed Providing dadooing with glazed white
of size 200mm x 300 mm / 245 mm x 325 mm and thickness 6 white full body ceramic wall tiles of full body ceramic wall tiles of size
mm 1st quality conforming to IS:13711, IS:13712, IS:13630 size 200mm x 300 mm / 245 mm x 200mm x 300 mm / 245 mm x 325 mm
(Parts 1 to 15) of any colour and finish in all shades and designs 325 mm
with borders as approved by Engineer-in-Charge flushed to
wall surface set over base coat of CM(1:5) 12 mm thick using
screened sand with cement slurry of honey like consistency
spread at the rate of 3.30 kgs per sqm and jointing with white
cement paste mixed with pigment of matching shade to full
depth, including cost of all materials like tiles, cement, sand and
water etc., and overheads & contractors profit complete for
finished item of work.
Basement Floor
993 Providing dadooing with glazed white full body ceramic wall tiles Providing dadooing with glazed Providing dadooing with glazed white
of size 200mm x 300 mm / 245 mm x 325 mm and thickness 6 white full body ceramic wall tiles of full body ceramic wall tiles of size
mm 1st quality conforming to IS:13711, IS:13712, IS:13630 size 200mm x 300 mm / 245 mm x 200mm x 300 mm / 245 mm x 325 mm
(Parts 1 to 15) of any colour and finish in all shades and designs 325 mm
with borders as approved by Engineer-in-Charge flushed to
wall surface set over base coat of CM(1:5) 12 mm thick using
screened sand with cement slurry of honey like consistency
spread at the rate of 3.30 kgs per sqm and jointing with white
cement paste mixed with pigment of matching shade to full
depth, including cost of all materials like tiles, cement, sand and
water etc., and overheads & contractors profit complete for
finished item of work.
First Floor :
772 Providing dadooing with glazed white full body ceramic wall tiles Providing dadooing with glazed Providing dadooing with glazed white
of size 200mm x 300 mm / 245 mm x 325 mm and thickness 6 white full body ceramic wall tiles of full body ceramic wall tiles of size
mm 1st quality conforming to IS:13711, IS:13712, IS:13630 size 200mm x 300 mm / 245 mm x 200mm x 300 mm / 245 mm x 325 mm
(Parts 1 to 15) of any colour and finish in all shades and designs 325 mm
with borders as approved by Engineer-in-Charge flushed to
wall surface set over base coat of CM(1:5) 12 mm thick using
screened sand with cement slurry of honey like consistency
spread at the rate of 3.30 kgs per sqm and jointing with white
cement paste mixed with pigment of matching shade to full
depth, including cost of all materials like tiles, cement, sand and
water etc., and overheads & contractors profit complete for
finished item of work.
Second Floor :
454 Providing dadooing with glazed white full body ceramic wall tiles Providing dadooing with glazed Providing dadooing with glazed white
of size 200mm x 300 mm / 245 mm x 325 mm and thickness 6 white full body ceramic wall tiles of full body ceramic wall tiles of size
mm 1st quality conforming to IS:13711, IS:13712, IS:13630 size 200mm x 300 mm / 245 mm x 200mm x 300 mm / 245 mm x 325 mm
(Parts 1 to 15) of any colour and finish in all shades and designs 325 mm
with borders as approved by Engineer-in-Charge flushed to
wall surface set over base coat of CM(1:5) 12 mm thick using
screened sand with cement slurry of honey like consistency
spread at the rate of 3.30 kgs per sqm and jointing with white
cement paste mixed with pigment of matching shade to full
depth, including cost of all materials like tiles, cement, sand and
water etc., and overheads & contractors profit complete for
finished item of work.
Third Floor :
542 Providing dadooing with glazed white full body ceramic wall tiles Providing dadooing with glazed Providing dadooing with glazed white
of size 200mm x 300 mm / 245 mm x 325 mm and thickness 6 white full body ceramic wall tiles of full body ceramic wall tiles of size
mm 1st quality conforming to IS:13711, IS:13712, IS:13630 size 200mm x 300 mm / 245 mm x 200mm x 300 mm / 245 mm x 325 mm
(Parts 1 to 15) of any colour and finish in all shades and designs 325 mm
with borders as approved by Engineer-in-Charge flushed to
wall surface set over base coat of CM(1:5) 12 mm thick using
screened sand with cement slurry of honey like consistency
spread at the rate of 3.30 kgs per sqm and jointing with white
cement paste mixed with pigment of matching shade to full
depth, including cost of all materials like tiles, cement, sand and
water etc., and overheads & contractors profit complete for
finished item of work.
Fourth Floor :
6 Providing dadooing with glazed full body porcelain wall tiles of Providing dadooing with glazed full Providing dadooing with glazed full
size 300mm x 600 mm with any type of design texture such as body porcelain wall tiles of size body porcelain wall tiles of size 300mm
marble finish, wooden, bamboo, stone finishes etc., scratch 300mm x 600 mm x 600 mm
less, stain free and thickness between 6-8 mm 1st quality
conforming to IS:13711, IS:13712, IS:13630 (Parts 1 to 15) of
any colour and finish in all shades and designs with borders
and design as per the approved pattern as approved by
Engineer-in-Charge flushed to wall surface set over base coat
of CM(1:5) 12 mm thick using screened sand with cement slurry
of honey like consistency spread at the rate of 3.30 kgs per sqm
and jointing with white cement paste mixed with pigment of
matching shade to full depth, including cost of all materials like
tiles, cement, sand and water etc., and overheads & contractors
profit complete for finished item of work.
Cellar :
559 Providing dadooing with glazed full body porcelain wall tiles of Providing dadooing with glazed full Providing dadooing with glazed full
size 300mm x 600 mm with any type of design texture such as body porcelain wall tiles of size body porcelain wall tiles of size 300mm
marble finish, wooden, bamboo, stone finishes etc., scratch 300mm x 600 mm x 600 mm
less, stain free and thickness between 6-8 mm 1st quality
conforming to IS:13711, IS:13712, IS:13630 (Parts 1 to 15) of
any colour and finish in all shades and designs with borders
and design as per the approved pattern as approved by
Engineer-in-Charge flushed to wall surface set over base coat
of CM(1:5) 12 mm thick using screened sand with cement slurry
of honey like consistency spread at the rate of 3.30 kgs per sqm
and jointing with white cement paste mixed with pigment of
matching shade to full depth, including cost of all materials like
tiles, cement, sand and water etc., and overheads & contractors
profit complete for finished item of work.
Basement Floor
784 Providing dadooing with glazed full body porcelain wall tiles of Providing dadooing with glazed full Providing dadooing with glazed full
size 300mm x 600 mm with any type of design texture such as body porcelain wall tiles of size body porcelain wall tiles of size 300mm
marble finish, wooden, bamboo, stone finishes etc., scratch 300mm x 600 mm x 600 mm
less, stain free and thickness between 6-8 mm 1st quality
conforming to IS:13711, IS:13712, IS:13630 (Parts 1 to 15) of
any colour and finish in all shades and designs with borders
and design as per the approved pattern as approved by
Engineer-in-Charge flushed to wall surface set over base coat
of CM(1:5) 12 mm thick using screened sand with cement slurry
of honey like consistency spread at the rate of 3.30 kgs per sqm
and jointing with white cement paste mixed with pigment of
matching shade to full depth, including cost of all materials like
tiles, cement, sand and water etc., and overheads & contractors
profit complete for finished item of work.
First Floor :
1086 Providing dadooing with glazed full body porcelain wall tiles of Providing dadooing with glazed full Providing dadooing with glazed full
size 300mm x 600 mm with any type of design texture such as body porcelain wall tiles of size body porcelain wall tiles of size 300mm
marble finish, wooden, bamboo, stone finishes etc., scratch 300mm x 600 mm x 600 mm
less, stain free and thickness between 6-8 mm 1st quality
conforming to IS:13711, IS:13712, IS:13630 (Parts 1 to 15) of
any colour and finish in all shades and designs with borders
and design as per the approved pattern as approved by
Engineer-in-Charge flushed to wall surface set over base coat
of CM(1:5) 12 mm thick using screened sand with cement slurry
of honey like consistency spread at the rate of 3.30 kgs per sqm
and jointing with white cement paste mixed with pigment of
matching shade to full depth, including cost of all materials like
tiles, cement, sand and water etc., and overheads & contractors
profit complete for finished item of work.
Second Floor :
1341 Providing dadooing with glazed full body porcelain wall tiles of Providing dadooing with glazed full Providing dadooing with glazed full
size 300mm x 600 mm with any type of design texture such as body porcelain wall tiles of size body porcelain wall tiles of size 300mm
marble finish, wooden, bamboo, stone finishes etc., scratch 300mm x 600 mm x 600 mm
less, stain free and thickness between 6-8 mm 1st quality
conforming to IS:13711, IS:13712, IS:13630 (Parts 1 to 15) of
any colour and finish in all shades and designs with borders
and design as per the approved pattern as approved by
Engineer-in-Charge flushed to wall surface set over base coat
of CM(1:5) 12 mm thick using screened sand with cement slurry
of honey like consistency spread at the rate of 3.30 kgs per sqm
and jointing with white cement paste mixed with pigment of
matching shade to full depth, including cost of all materials like
tiles, cement, sand and water etc., and overheads & contractors
profit complete for finished item of work.
Third Floor :
1578 Providing dadooing with glazed full body porcelain wall tiles of Providing dadooing with glazed full Providing dadooing with glazed full
size 300mm x 600 mm with any type of design texture such as body porcelain wall tiles of size body porcelain wall tiles of size 300mm
marble finish, wooden, bamboo, stone finishes etc., scratch 300mm x 600 mm x 600 mm
less, stain free and thickness between 6-8 mm 1st quality
conforming to IS:13711, IS:13712, IS:13630 (Parts 1 to 15) of
any colour and finish in all shades and designs with borders
and design as per the approved pattern as approved by
Engineer-in-Charge flushed to wall surface set over base coat
of CM(1:5) 12 mm thick using screened sand with cement slurry
of honey like consistency spread at the rate of 3.30 kgs per sqm
and jointing with white cement paste mixed with pigment of
matching shade to full depth, including cost of all materials like
tiles, cement, sand and water etc., and overheads & contractors
profit complete for finished item of work.
Fourth Floor :
12 Providing cladding to walls with High Polished Granite 16 mm Providing cladding to walls with High Providing cladding to walls with High
to 18 mm thick up to 8'-00 (2.43 M) other than black and regular Polished Granite 16 mm to 18 mm Polished Granite 16 mm to 18 mm
colours, length equal to flooring slabs set over base coat of thick up to 8'-00 (2.43 M) other than thick up to 8'-00 (2.43 M) other than
CM(1:5) 12 mm thick using screened sand with cement slurry of black black
honey like consistency spread at the rate of 3.30 kgs per sqm
and jointing with white cement paste mixed with pigment of
matching shade to full depth, including cost of all materials like
tiles, cement, sand and water etc., and overheads & contractors
profit complete for finished item of work.
Cellar :
247 Providing cladding to walls with High Polished Granite 16 mm Providing cladding to walls with High Providing cladding to walls with High
to 18 mm thick up to 8'-00 (2.43 M) other than black and regular Polished Granite 16 mm to 18 mm Polished Granite 16 mm to 18 mm
colours, length equal to flooring slabs set over base coat of thick up to 8'-00 (2.43 M) other than thick up to 8'-00 (2.43 M) other than
CM(1:5) 12 mm thick using screened sand with cement slurry of black black
honey like consistency spread at the rate of 3.30 kgs per sqm
and jointing with white cement paste mixed with pigment of
matching shade to full depth, including cost of all materials like
tiles, cement, sand and water etc., and overheads & contractors
profit complete for finished item of work.
Basement Floor
27 Providing cladding to walls with High Polished Granite 16 mm Providing cladding to walls with High Providing cladding to walls with High
to 18 mm thick up to 8'-00 (2.43 M) other than black and regular Polished Granite 16 mm to 18 mm Polished Granite 16 mm to 18 mm
colours, length equal to flooring slabs set over base coat of thick up to 8'-00 (2.43 M) other than thick up to 8'-00 (2.43 M) other than
CM(1:5) 12 mm thick using screened sand with cement slurry of black black
honey like consistency spread at the rate of 3.30 kgs per sqm
and jointing with white cement paste mixed with pigment of
matching shade to full depth, including cost of all materials like
tiles, cement, sand and water etc., and overheads & contractors
profit complete for finished item of work.
First Floor :
13 Providing cladding to walls with High Polished Granite 16 mm Providing cladding to walls with High Providing cladding to walls with High
to 18 mm thick up to 8'-00 (2.43 M) other than black and regular Polished Granite 16 mm to 18 mm Polished Granite 16 mm to 18 mm
colours, length equal to flooring slabs set over base coat of thick up to 8'-00 (2.43 M) other than thick up to 8'-00 (2.43 M) other than
CM(1:5) 12 mm thick using screened sand with cement slurry of black black
honey like consistency spread at the rate of 3.30 kgs per sqm
and jointing with white cement paste mixed with pigment of
matching shade to full depth, including cost of all materials like
tiles, cement, sand and water etc., and overheads & contractors
profit complete for finished item of work.
Second Floor :
5 Providing cladding to walls with High Polished Granite 16 mm Providing cladding to walls with High Providing cladding to walls with High
to 18 mm thick up to 8'-00 (2.43 M) other than black and regular Polished Granite 16 mm to 18 mm Polished Granite 16 mm to 18 mm
colours, length equal to flooring slabs set over base coat of thick up to 8'-00 (2.43 M) other than thick up to 8'-00 (2.43 M) other than
CM(1:5) 12 mm thick using screened sand with cement slurry of black black
honey like consistency spread at the rate of 3.30 kgs per sqm
and jointing with white cement paste mixed with pigment of
matching shade to full depth, including cost of all materials like
tiles, cement, sand and water etc., and overheads & contractors
profit complete for finished item of work.
Third Floor :
5 Providing cladding to walls with High Polished Granite 16 mm Providing cladding to walls with High Providing cladding to walls with High
to 18 mm thick up to 8'-00 (2.43 M) other than black and regular Polished Granite 16 mm to 18 mm Polished Granite 16 mm to 18 mm
colours, length equal to flooring slabs set over base coat of thick up to 8'-00 (2.43 M) other than thick up to 8'-00 (2.43 M) other than
CM(1:5) 12 mm thick using screened sand with cement slurry of black black
honey like consistency spread at the rate of 3.30 kgs per sqm
and jointing with white cement paste mixed with pigment of
matching shade to full depth, including cost of all materials like
tiles, cement, sand and water etc., and overheads & contractors
profit complete for finished item of work.
Fourth Floor :
40 Filling with well burnt cinder aggregate as per IS:2686-1977 in Filling with well burnt cinder Filling with well burnt cinder
sunken slabs including cost and conveyance of cinder, labour
charges for filling, ramming, overheads and contractor profit
etc., complete for finished item of work
First Floor :
40 Filling with well burnt cinder aggregate as per IS:2686-1977 in Filling with well burnt cinder Filling with well burnt cinder
sunken slabs including cost and conveyance of cinder, labour
charges for filling, ramming, overheads and contractor profit
etc., complete for finished item of work
Second Floor :
41 Filling with well burnt cinder aggregate as per IS:2686-1977 in Filling with well burnt cinder Filling with well burnt cinder
sunken slabs including cost and conveyance of cinder, labour
charges for filling, ramming, overheads and contractor profit
etc., complete for finished item of work
Third Floor :
61 Filling with well burnt cinder aggregate as per IS:2686-1977 in Filling with well burnt cinder Filling with well burnt cinder
sunken slabs including cost and conveyance of cinder, labour
charges for filling, ramming, overheads and contractor profit
etc., complete for finished item of work
Fourth Floor :
40 Reinforced cement concrete (1:5:10) proportion (Cement: fine Reinforced cement concrete (1:5:10) Reinforced cement concrete (1:5:10)
aggregates: coarse aggregate) using 40mm size (SS5) hard proportion proportion
granite metal (coarse aggregate) from approved quarry
including cost and conveyance of all materials like cement, fine
aggregate (sand), coarse aggregate, water etc., to site including
centering using Casurina Ballies , Bamboos , Wooden
Reapers , Runners , Wood Posts , Wall Plates etc., shuttering,
machine mixing, laying concrete, lifting concrete manually ,
vibrating, curing, etc., and overheads & contractors profit
complete as per drawings but excluding cost of steel and it's
fabrication charges for finished item of work (APSS NO. 402 &
403) for dummy columns.
Fifth Floor :
1326.00 Providing impervious coat to exposed RCC roof slab surfaces Providing impervious coat 12mm Providing impervious coat 12mm thick
of sump , sump side wall,sump bottom slab,in side of septic thick
tank , in sunken slabs etc. to required slopes with CM (1:3)
prop. using screened sand 12mm thick mixed with integral
cement water proofing liquid confirming to IS: 2645-2003
manufactured by reputed manufacturers as approved by
Engineer-in-charge at 200ml per one bag of cement, laid over
roof slab when it is green, finished smooth with a floating coat of
neat cement and thread lining at regular intervals of
45cmx45cm where ever necessary including cost and
conveyance of all materials like cement, sand, water proofing
compound, water etc., to site, operational, incidental, and labour
charges for mixing mortar, laying, lift charges, rendering smooth
and thread lining, curing including rounding off junctions of wall
and slab etc., and overheads & contractors profit complete for
finished item of work. (APSS No. 901 & 903).
First Floor :
465.00 Providing specialized high performance acrylic polymer modified Providing specialized high Providing specialized high
elastomeric cementitious waterproof coating to the bottom and performance acrylic polymer performance acrylic polymer modified
sides of sunken slabs of toilets duly cleaning of the surface from modified elastomeric cementitious elastomeric cementitious waterproof
dirt, dust and other contaminations, providing and application of waterproof coating coating
two coats of high performance Acrylic polymer modified
Elastomeric cementitious waterproof coating ( 1.8 Sq. Mtr. /
Kg /Each Coat ) including cost and conveyance of all materials
to site, operationals & incidental charges, lift charges etc., and
overheads & contractors profit complete for finished item of
work
0 Providing impervious coat to exposed RCC roof slab surfaces Providing impervious coat 12mm Providing impervious coat 12mm thick
of sump , sump side wall,sump bottom slab,in side of septic thick
tank , in sunken slabs etc. to required slopes with CM (1:3)
prop. using screened sand 12mm thick mixed with integral
cement water proofing liquid confirming to IS: 2645-2003
manufactured by reputed manufacturers as approved by
Engineer-in-charge at 200ml per one bag of cement, laid over
roof slab when it is green, finished smooth with a floating coat of
neat cement and thread lining at regular intervals of
45cmx45cm where ever necessary including cost and
conveyance of all materials like cement, sand, water proofing
compound, water etc., to site, operational, incidental, and labour
charges for mixing mortar, laying, lift charges, rendering smooth
and thread lining, curing including rounding off junctions of wall
and slab etc., and overheads & contractors profit complete for
finished item of work. (APSS No. 901 & 903).
Fifth Floor :
308 Providing impervious coat to exposed RCC roof slab surfaces to Providing impervious coat 20mm Providing impervious coat 20mm thick
required slopes with CM (1:3) prop. using screened sand 20mm thick
thick (average) mixed with integral cement water proofing liquid
confirming to IS: 2645-2003 manufactured by reputed
manufacturers as approved by Engineer-in-charge at 200ml per
one bag of cement, laid over roof slab when it is green, finished
smooth with a floating coat of neat cement and thread lining at
regular intervals of 45cmx45cm including cost and conveyance
of all materials like cement, sand, water proofing compound,
water etc., to site, operational, incidental, and labour charges for
mixing mortar, laying, lift charges, rendering smooth and thread
lining, curing including rounding off junctions of wall and slab
etc., and overheads & contractors profit complete for finished
item of work. (APSS No. 901 & 903).
First Floor :
298 Providing impervious coat to exposed RCC roof slab surfaces to Providing impervious coat 20mm Providing impervious coat 20mm thick
required slopes with CM (1:3) prop. using screened sand 20mm thick
thick (average) mixed with integral cement water proofing liquid
confirming to IS: 2645-2003 manufactured by reputed
manufacturers as approved by Engineer-in-charge at 200ml per
one bag of cement, laid over roof slab when it is green, finished
smooth with a floating coat of neat cement and thread lining at
regular intervals of 45cmx45cm including cost and conveyance
of all materials like cement, sand, water proofing compound,
water etc., to site, operational, incidental, and labour charges for
mixing mortar, laying, lift charges, rendering smooth and thread
lining, curing including rounding off junctions of wall and slab
etc., and overheads & contractors profit complete for finished
item of work. (APSS No. 901 & 903).
above First Floor :
2874 Providing impervious coat to exposed RCC roof slab surfaces to Providing impervious coat 20mm Providing impervious coat 20mm thick
required slopes with CM (1:3) prop. using screened sand 20mm thick
thick (average) mixed with integral cement water proofing liquid
confirming to IS: 2645-2003 manufactured by reputed
manufacturers as approved by Engineer-in-charge at 200ml per
one bag of cement, laid over roof slab when it is green, finished
smooth with a floating coat of neat cement and thread lining at
regular intervals of 45cmx45cm including cost and conveyance
of all materials like cement, sand, water proofing compound,
water etc., to site, operational, incidental, and labour charges for
mixing mortar, laying, lift charges, rendering smooth and thread
lining, curing including rounding off junctions of wall and slab
etc., and overheads & contractors profit complete for finished
item of work. (APSS No. 901 & 903).
Fifth Floor :
1110 Providing 110 mm Dia ISI marked PVC down water take Providing 110 mm Dia ISI marked Providing 110 mm Dia ISI marked PVC
pipes with socket , 2.5mm thick 4.0 kg/sq.cm pressure of ISI PVC down water take pipes down water take pipes
marked including cost of necessary PVC Bends, shoes, iron /
PVC clamps and all other accessories and fixing in position
including cost and conveyance of all materials, operational &
incidental charges including all labour charges for fixing at site
etc., and overheads & contractors profit complete for finished
item of work. (APSS No. 1328)
16 RCM facia 50mm thick in CM(1:3) using screened sand for drop RCM facia 50mm thick in CM(1:3) RCM facia 50mm thick in CM(1:3)
walls, fins with rabbit wire mesh & nomianl reinforcement as
directred by Engineer - In - Charge with dubara sponge
finishing,including cost and conveyance of all materials to site,
operationals &incidental,cost and conveyance of cement, wire
mesh water to work site, centering, scaffolding and form work,lift
charges etc., and overheads & contractors profit complete for
finished item of work but excluding cost of steel and its
fabrication charges for finished item of work(APSS
NO.403&903)
Basement Floor
21 RCM facia 50mm thick in CM(1:3) using screened sand for drop RCM facia 50mm thick in CM(1:3) RCM facia 50mm thick in CM(1:3)
walls, fins with rabbit wire mesh & nomianl reinforcement as
directred by Engineer - In - Charge with dubara sponge
finishing,including cost and conveyance of all materials to site,
operationals &incidental,cost and conveyance of cement, wire
mesh water to work site, centering, scaffolding and form work,lift
charges etc., and overheads & contractors profit complete for
finished item of work but excluding cost of steel and its
fabrication charges for finished item of work(APSS
NO.403&903)
First Floor :
6 RCM facia 50mm thick in CM(1:3) using screened sand for drop RCM facia 50mm thick in CM(1:3) RCM facia 50mm thick in CM(1:3)
walls, fins with rabbit wire mesh & nomianl reinforcement as
directred by Engineer - In - Charge with dubara sponge
finishing,including cost and conveyance of all materials to site,
operationals &incidental,cost and conveyance of cement, wire
mesh water to work site, centering, scaffolding and form work,lift
charges etc., and overheads & contractors profit complete for
finished item of work but excluding cost of steel and its
fabrication charges for finished item of work(APSS
NO.403&903)
Second Floor :
6 RCM facia 50mm thick in CM(1:3) using screened sand for drop RCM facia 50mm thick in CM(1:3) RCM facia 50mm thick in CM(1:3)
walls, fins with rabbit wire mesh & nomianl reinforcement as
directred by Engineer - In - Charge with dubara sponge
finishing,including cost and conveyance of all materials to site,
operationals &incidental,cost and conveyance of cement, wire
mesh water to work site, centering, scaffolding and form work,lift
charges etc., and overheads & contractors profit complete for
finished item of work but excluding cost of steel and its
fabrication charges for finished item of work(APSS
NO.403&903)
Third Floor :
6 RCM facia 50mm thick in CM(1:3) using screened sand for drop RCM facia 50mm thick in CM(1:3) RCM facia 50mm thick in CM(1:3)
walls, fins with rabbit wire mesh & nomianl reinforcement as
directred by Engineer - In - Charge with dubara sponge
finishing,including cost and conveyance of all materials to site,
operationals &incidental,cost and conveyance of cement, wire
mesh water to work site, centering, scaffolding and form work,lift
charges etc., and overheads & contractors profit complete for
finished item of work but excluding cost of steel and its
fabrication charges for finished item of work(APSS
NO.403&903)
Fourth Floor :
36.6 Supply and fixing of doors as per approved drawings with 1st Supply and fixing of doors as per Supply and fixing of doors as per
Grade Burma teak wood frame of section 250mm x 150 mm of approved drawings with 1st Grade approved drawings with 1st Grade
4 verticals of 2.85m height with one horizontal at the top of Burma teak wood (6100mm x Burma teak wood (6100mm x
6.10m of length with a section of 250mm x 150mm, and at the 2850mm) 2850mm)
bottom of frame 2 Nos of 1.25m length horizontals each of
section 250mm x 150mm and with 1st grade burma teak wood
door shutter of 150mmX35mm thick alround frame double
shutter on center and single shutter on either side and with
12mm thick plain float glass fixid to door shutter with teak wood
beeding of 12mmX12mm Supply and fixing of 8 Nos. MS hold
fasts of size (450 mm x 100 mm x 8mm) flat of 2 nos welded
together to fix with the help of anchor fasteners of 4 nos (Two
on either side) including cost of ISI marked Brass fixtures of 16
Nos. butt hinges of 250mm long, 3 No. brass aldrops (IS:2681)
of 450mm long, 3 Nos. brass tower bolts (IS:204) of 300 mm x
10 mm dia at top, 4 Nos. of 450mm long brass fanvy handless
(IS:208) at front side and 4 Nos of 300mm Brass handles on
back side, 4 Nos.of door stoppers, including fixing the fixtures
to door with required number of screws, bolt and nuts including
labour charges for fixing the frame in position, fixing the shutter
to the frame etc., including cost & conveyence, overheads &
contractors profit etc.. complete for finished item of work
(6100mm x 2850mm)
Basement Floor & First Floors
525.2 Supply and fixing powder coated aluminium fully glazed swing Supply and fixing powder coated Supply and fixing powder coated
door as per the approved drawing with fixed fan light of 500mm aluminium fully glazed swing door aluminium fully glazed swing door
height at top door using aluminium sections of 101.60 mmm x
44.45mm , 3.18 mm thick for frame and door shutter made of
styles , top and middle rail of 47.62mm x 44.45mm , 3.18 mm
thick and bottom rail of 114.30mm x 44.45 mm , 3.18mm
thick,powder coating of alluminium sections 25mm microns
thick, 5 mm thick plain float glass fitted with suitable aluminium
glazing clips and rubber beading in fan light portion, double
shutters fitted with 5mm thick frosted / ground glass in the top
half and MDF Board: interior-Both Side Laminated -12 mm thick
in the bottom half fitted with suitable aluminium glazing clips
and rubber beading,shutters mounted on double action
hydraulic floor spring of approved brand manufacture IS : 6315
marked , Hardwyn make M-3000 for doors including cost of
cutting floors as required , embedding in floors and SS cover
plates with brass pivot and sigle piece MS Sheet outer box with
slide plate etc.complete (Weight Capacity up to 130 Kgs)
as approved by Engineer-in-Charge including supply and fixing
ISI marked powder coated aluminium fixtures of 3 Nos. of butt
hinges (IS:205) of 150mm long(for each shutter), 4 Nos.tower
bolts 10mm bolt (IS:204) 300mm long , 4 Nos.alluminium
handles (IS:208) 150mm dia and 2 Nos. aldrops (IS:2681)
245.7 Supply and fixing of doors as per approved drawings with Supply and fixing of doors as per Supply and fixing of doors as per
medium teak wood frame of section 100mm x 65 mm with split approved drawings with medium approved drawings with medium teak
type fan light of 500mm at the top fixed with 4mm thick pin teak wood wood
headed glass using 12mm x 12mm Teak Wood beading and 2
Nos. of 10mm MS Square bars and ISI marked flush door
shutter of 30mm thick double shutters with bond wood solid
block board type core having cross bands and face veneers, hot
pressed bonded with water proof phenol formaldehyde synthetic
resin factory made conforming to IS 2202-1991 (Part-I) both
sides commercial ply with internal lipping on all sides, fixing
1mm thick mat finish laminated sheet to full width and height of
the flush shutter both sides including cost and conveyance to
site of teak wood frame, flush shutter, laminate sheet including
supply and fixing 6 Nos. MS Z hold fasts of size 300 mm x 40
mm x 5mm including cost of ISI marked Alumimium fixtures of 6
Nos. butt hinges (IS:205) 150mm long, 1 No. aldrop (IS:2681)
300mm long, 2 Nos. tower bolts (IS:204) of 200 mm x 10 mm
dia at top, 2 Nos. 150mm long handles (IS:208), 2 Nos. door
stoppers and 2 Nos. Rubber / Nylon door stop bushes including
fixing the fixtures to door with required number of screws, bolt
and nuts including labour charges for fixing the frame in
position, fixing the shutter to the frame, fixing glass in fan light
portion etc., including overheads & contractors profit complete
149.76 Supply and fixing of doors as per approved drawings with Supply and fixing of doors as per Supply and fixing of doors as per
medium teak wood frame of section 100mm x 65 mm with split approved drawings with medium approved drawings with medium teak
type fan light of 500mm at the top fixed with 4mm thick pin teak wood wood
headed glass using 12mm x 12mm Teak Wood beading and 2
Nos. of 10mm MS Square bars and ISI marked flush door
shutter of 30mm thick double shutters with bond wood solid
block board type core having cross bands and face veneers, hot
pressed bonded with water proof phenol formaldehyde synthetic
resin factory made conforming to IS 2202-1991 (Part-I) both
sides commercial ply with internal lipping on all sides, fixing
1mm thick mat finish laminated sheet to full width and height of
the flush shutter both sides including cost and conveyance to
site of teak wood frame, flush shutter, laminate sheet including
supply and fixing 6 Nos. MS Z hold fasts of size 300 mm x 40
mm x 5mm including cost of ISI marked Aluminium fixtures of 6
Nos. butt hinges (IS:205) 150mm long, 1 No. aldrop (IS:2681)
300mm long, 2 Nos. tower bolts (IS:204) of 200 mm x 10 mm
dia at top, 2 Nos. 150mm long handles (IS:208), 2 Nos. door
stoppers and 2 Nos. Rubber / Nylon door stop bushes including
fixing the fixtures to door with required number of screws, bolt
and nuts including labour charges for fixing the frame in
position, fixing the shutter to the frame, fixing glass in fan light
portion etc, including overheads & contractors profit complete
123.2 Supply and fixing of doors as per approved drawings with Supply and fixing of doors as per Supply and fixing of doors as per
medium teak wood frame of section 100mm x 65 mm with split approved drawings with medium approved drawings with medium teak
type fan light of 500mm at the top fixed with 4mm thick pin teak wood wood
headed glass using 12mm x 12mm Teak Wood beading and 2
Nos. of 10mm MS Square bars and ISI marked flush door
shutter of 30mm thick single shutter with bond wood solid block
board type core having cross bands and face veneers, hot
pressed bonded with water proof phenol formaldehyde synthetic
resin factory made conforming to IS 2202-1991 (Part-I) both
sides commercial ply with internal lipping on all sides fixing 1mm
thick mat finish laminated sheet to full width and height of the
flush shutter both sides including cost and conveyance to site of
teak wood frame, flush shutter, laminate sheet including supply
and fixing 6 Nos. MS Z hold fasts of size 300 mm x 40 mm x
5mm including cost of ISI marked Aluminium fixtures of 3 Nos.
butt hinges (IS:205) 150mm long , 1 No. aldrop (IS:2681)
300mm long, 1 No. tower bolt (IS:204) of 200 mm x 10 mm dia
at top, 2 Nos. 150mm long handles (IS:208), 1 No. door stopper
and 1 No. Rubber / Nylon door stop bushes including fixing the
fixtures to door with required number of screws, bolt and nuts
including labour charges for fixing the frame in position, fixing
the shutter to the frame, fixing glass in fan light portion etc,
including overheads & contractors profit complete for finished
294.84 Supply and fixing doors as per drawings with medium teak Supply and fixing of doors as per Supply and fixing of doors as per
wood frame of section 100mm x 65 mm and ISI marked flush approved drawings with medium approved drawings with medium teak
door shutters of 30 mm thick single shutter with bond wood solid teak wood wood
block board type Core having cross bands and face veneers,
hot pressed bonded with water proof phenol formaldehyde
synthetic resin factory made conforming to IS 2202-1991 (Part-
I) both sides commercial ply with internal lipping on all sides,
fixing 1mm thick mat finish laminated sheet to full width and
height of the flush shutter both sides including cost and
conveyance to site of teak wood frame, flush shutter, laminate
sheet including supply and fixing 6 Nos. MS Z hold fasts of size
300 mm x 40 mm x 5mm including cost of ISI marked
Aluminium fixtures of 3 Nos. butt hinges (IS:205) 150mm long, 1
No. aldrop (IS:2681) 300mm long, 1 No. tower bolt (IS:204) of
200 mm x 10 mm dia at top, 2 Nos. 150 mm long handles
(IS:208), 1 No. door stopper and 1 No. Rubber / Nylon door stop
bushes including fixing the fixtures to door with required
number of screws, bolt and nuts including labour charges for
fixing the frame in position, fixing the shutter to the frame etc,
including overheads & contractors profit complete for finished
item of work as per APSS 1001 & 1002 (The vertical frame of
door shall be embedded in flooring for a depth of not less than
10 mm) (900mm x 2100mm)
1265 Supplying and fixing single side prelam solid panel PVC Supplying and fixing single side Supplying and fixing single side prelam
door frame (Choukhat): Providing and fixing factory made Pac prelam solid panel PVC door frame solid panel PVC door frame
single side Prelam door frame of the size 50x7 mm with a wall (Choukhat) (Choukhat)
thickness of 5mm, made out of extruded 5mm rigid Pac single
side prelam sheet, meter cut at two corners and joined with 2
Nos. of 150mm long brackets of 15 x 15mm MS Square tube.
The two vertical door profiles are to be reinforced with 19 x
19mm MS. square tube of 19 guage. The door frame shall be
fixed to the wall using 65/100mm long MS. Screws through the
frame by using Pac fasteners. a minimum of 4 Nos. of screws to
be provided for each vertical member and minimum 2nos. for
horizontal member etc. complete as per manufacture
specification and direction of Engineer-incharge including
conveyance of all materials, labour charges for fixing,
overheads & contractors profit complete for finished item of
work.
Cellar to Fourth Floors
425.04 Providing and fixing 30mm thick factory made moulded Providing and fixing 30mm thick Providing and fixing 30mm thick
door shutter- wood free consisting of frame made out of MS. factory made moulded door shutter factory made moulded door shutter
tubes 19gauge thickness and size of 25mmX25mm for styles,
top and bottom rails. MS. Frame shall have a coat of steel
primers. The inner panel shall consist of 25mm thick high
density EPS conforming to IS 4671-1984 bounded with 2mm
thick termite proof, water proof and fire resistant moulded Pac
sheet with 2,4,6 raised panel design in different plain and / or
pre-lam colours after routing to the moulded design on one side
and 2mm plain and / or pre-lam Pac sheet on other side of the
EPS. The edge of panel to be sealed with lipping of 10mm wide
PVC sheet bottom (made by sticking 2 rigid foam sheet of 5mm
thickness using Pac solvent cement) and stiles sides
25mm(5mmX5) thick and 30mm width Pac sheet fitted along
MS tube for lock provision for lock height 5mm thick Pac sheet
of size 150mmX100mm fixed with upper and lower face of inner
side of EPS panel etc., complete as per direction of Engineer –
in-Charge, manufacture specification and drawing including ISI
marked Aluminium fixtures 3 Nos. butt hinges (IS:205) of
150mm long, 1 No. aldrop (IS:2681) 250 mm long, 1 No. tower
bolt (IS:204) of 150 mm x 10mm dia, 2 Nos. 125mm long
handles (IS:208),1 No. Rubber / Nylon door stop bushes
including labour charges for fixing the shutter to frame etc.,
including overheads & contractors profit complete for finished
1237.44 Providing and fixing factory made uPVC white colour sliding Providing and fixing factory made Providing and fixing factory made
glazed window comprising of uPVC multi-chambered frame with uPVC white colour sliding glazed uPVC white colour sliding glazed
in-built roller track and sash extruded profiles duly reinforced window comprising of uPVC window comprising of uPVC
with 1.60 ± 0.2 mm thick galvanized mild steel section made
from roll forming process of required length (shape & size
according to uPVC profile), appropriate dimension of uPVC
extruded glazing beads and uPVC extruded interlocks, EPDM
gasket, wool pile, zinc alloy (white powder coated) touch locks
with hook, zinc alloy body with single nylon rollers (weight
bearing capacity to be 40 kg), G.I fasteners 100 x 8 mm size for
fixing frame to finished wall and necessary stainless steel
screws etc. Profile of frame & sash shall be mitred cut and
fusion welded at all corners, including drilling of holes for fixing
hardware's and drainage of water etc. After fixing frame the gap
between frame and adjacent finished wall shall be filled with
weather proof silicon sealent over backer rod of required size
and of approved quality, all complete as per approved drawing
& direction of Engineer-in-Charge inclusive of cost of Single /
double glass panes of 4mm thick pin headed glass, wire mesh
and silicon sealent . Note: For uPVC frame and sash extruded
profiles minus 5% tolerancein dimension i.e. in depth & width of
profile shall be acceptable.Variation in profile dimension in
higher side shall be accepted. But no extra payment on this
account shall be made.
184.68 Providing and fixing factory made uPVC white colour sliding Providing and fixing factory made Providing and fixing factory made
glazed window comprising of uPVC multi-chambered frame with uPVC white colour sliding glazed uPVC white colour sliding glazed
in-built roller track and sash extruded profiles duly reinforced window comprising of uPVC window comprising of uPVC
with 1.60 ± 0.2 mm thick galvanized mild steel section made
from roll forming process of required length (shape & size
according to uPVC profile), appropriate dimension of uPVC
extruded glazing beads and uPVC extruded interlocks, EPDM
gasket, wool pile, zinc alloy (white powder coated) touch locks
with hook, zinc alloy body with single nylon rollers (weight
bearing capacity to be 40 kg), G.I fasteners 100 x 8 mm size for
fixing frame to finished wall and necessary stainless steel
screws etc. Profile of frame & sash shall be mitred cut and
fusion welded at all corners, including drilling of holes for fixing
hardware's and drainage of water etc. After fixing frame the gap
between frame and adjacent finished wall shall be filled with
weather proof silicon sealent over backer rod of required size
and of approved quality, all complete as per approved drawing
& direction of Engineer-in-Charge inclusive of cost of Single /
double glass panes of 4mm thick pin headed glass, wire mesh
and silicon sealent . Note: For uPVC frame and sash extruded
profiles minus 5% tolerancein dimension i.e. in depth & width of
profile shall be acceptable.Variation in profile dimension in
higher side shall be accepted. But no extra payment on this
account shall be made.
132.45 Providing and fixing factory made uPVC white colour fixed Providing and fixing factory made Providing and fixing factory made
glazed windows / Ventilators comprising of uPVC multi uPVC white colour fixed glazed uPVC white colour fixed glazed
chambered frame and mullion (where ever required) extruded windows / Ventilators windows / Ventilators
profiles duly reinforced with 1.60± 0.2 mm thick galvanized mild
steel section made from roll forming process of required length
(shape & size according to uPVC profile), uPVC extruded
glazing beads of appropriate dimension, EPDM gasket,G.I
fasteners 100 x 8 mm size for fixing frame to finished wall,
plastic packers, plastic caps and necessary stainless steel
screws etc. Profileof frame shall be mitred cut and fusion
welded at all corners, mullion (if required) shall be also fusion
welded including drilling of holes for fixing hardware and
drainage of water etc.
After fixing frame the gap between frame and adjacent finished
wall shall be filled with weather proof silicon sealant over backer
rod of required size and of approved quality, all complete as per
approved drawing & direction of Engineer-in-Charge inclusive of
cost of Single / double glass panes and silicon sealant. Note:
For uPVC frame, sash and mullion extruded profiles minus
5%tolerance in dimension i.e. in depth & width of profile shall be
acceptable.Variation in profile dimension in higher side shall be
accepted. But, no extra payment on this account shall be made.
Fixed windows / Ventilators made of (small series) frame 47 x
50mm & mullion 47 x 68 mm both having wall thickness of 1.9
#REF! Supplying and fixing of MS doors, grill to windows / in open Supplying and fixing of MS doors, Supplying and fixing of MS doors, grill
court yards using MS angles, flat, square bars including cost grill to windows / in open court yards to windows / in open court yards
and conveyance of all materials, cutting, bending, welding, all
operational charges, labour charges, overheads and contractor
profit etc., complete for finished item of work. For All Floors
39 Supply and fixing jallies ( cement concrete ) of 50mm thick as Supply and fixing jallies ( cement Supply and fixing jallies ( cement
per the design approved by the Engineer-in-Charge including concrete ) of 50mm thick concrete ) of 50mm thick
cost and conveyance of materials to site and labour charges
etc., overheads & contractors profit complete for finished item of
work.
Cellar :
78 Supply and fixing jallies ( cement concrete ) of 50mm thick as Supply and fixing jallies ( cement Supply and fixing jallies ( cement
per the design approved by the Engineer-in-Charge including concrete ) of 50mm thick concrete ) of 50mm thick
cost and conveyance of materials to site and labour charges
etc., overheads & contractors profit complete for finished item of
work.
Basement Floor
78 Supply and fixing jallies ( cement concrete ) of 50mm thick as Supply and fixing jallies ( cement Supply and fixing jallies ( cement
per the design approved by the Engineer-in-Charge including concrete ) of 50mm thick concrete ) of 50mm thick
cost and conveyance of materials to site and labour charges
etc., overheads & contractors profit complete for finished item of
work.
First Floor :
78 Supply and fixing jallies ( cement concrete ) of 50mm thick as Supply and fixing jallies ( cement Supply and fixing jallies ( cement
per the design approved by the Engineer-in-Charge including concrete ) of 50mm thick concrete ) of 50mm thick
cost and conveyance of materials to site and labour charges
etc., overheads & contractors profit complete for finished item of
work.
Second Floor :
52 Supply and fixing jallies ( cement concrete ) of 50mm thick as Supply and fixing jallies ( cement Supply and fixing jallies ( cement
per the design approved by the Engineer-in-Charge including concrete ) of 50mm thick concrete ) of 50mm thick
cost and conveyance of materials to site and labour charges
etc., overheads & contractors profit complete for finished item of
work.
Third Floor :
72 Supply and fixing jallies ( cement concrete ) of 50mm thick as Supply and fixing jallies ( cement Supply and fixing jallies ( cement
per the design approved by the Engineer-in-Charge including concrete ) of 50mm thick concrete ) of 50mm thick
cost and conveyance of materials to site and labour charges
etc., overheads & contractors profit complete for finished item of
work.
Fourth Floor :
246 Providing and Fixing Structural Glazing fabricated from Roll Providing and Fixing Structural Providing and Fixing Structural Glazing
formed sections made of Pre-painted Steel / Powder coated Glazing fabricated from Roll formed fabricated from Roll formed sections
(Base steel as per IS 513 of ‘D’ quality, galvanized as per IS sections
277 with Zinc of 120 Gm/sqm) with total coated thickness of
0.72mm. The glass holding section made of 304 grade stainless
steel of 0.6mm thick as per the design requirement &
calculations as given in IS: 875. Primer coat with epoxy primer
of 5 – 7 microns thick, finish painted with a polyester paint of 12-
16 microns thick and back coated with Alkyd backer of 5-7
microns or powder coated with pure polyester powder up to 50-
60 microns thick. The vertical section should be of 50mm
x100mm x 0.72mm, 33mm x 58mm x 0.72mm for frame
horizontal section, stiffener section should be 48mm x 98mm x
1mm, cover profiles sections should be of 20mm x 58mm x
0.58mm, Glass holding section should be of 37mm x 37mm &
37mm x 18mm. Including 5mm thick Ocean Blue reflective
glass. Brackets made of CRCA powder coated/Electroplated
should be used to connect vertical to horizontal, vertical to slab,
to fix verticals at top & bottom as per site requirement. Gasket
made of Ethyl Propylene Diamine Monomer. Natural cure, with
Good U.V. Resistance Silicon to be used. Wall fixing of sections
to concrete/masonry wall should be with self-expanding cap &
screws. The rate is inclusive of cost and conveyance of all
materials to site, all labour charges, incidental charges, cost of
all consumables etc. and scaffolding charges, form work ,
overheads & contractors profit etc., complete for finished item of
work in all floors.
53 Providing and Fixing Top Hung shutters in Structural Providing and Fixing Top Hung Providing and Fixing Top Hung
Glazing fabricated from Roll formed sections made of Pre- shutters in Structural Glazing shutters in Structural Glazing
painted Steel / Powder coated (Base steel as per IS 513 of ‘D’ fabricated from Roll formed sections fabricated from Roll formed sections
quality, galvanized as per IS 277 with Zinc of 120 Gm/sqm) with
total coated thickness of 0.72mm. The glass holding section
made of 304 grade stainless steel of 0.6mm thick. Galvanized
steel sections are to be used as stiffeners inside the colour
coated steel/powder coated sections as per the design
requirement. Design calculations are made to suit wind
pressures as given in IS 875. Primer coat with epoxy primer of
5-7 microns thick and back coated with Alkyd backer of 5-7
microns or powder coated with pure polyester powder up to 50-
60 microns thick. The outer frame should be of 20mm x 58mm
x 0.6mm, Shutter section should be of 58mm x 33mm x 0.72
mm, stiffener section should be 56mm x 31mm x 1mm. EARL
Bihari Hinges – 2 Nos for each shutter and Aluminium Stays – 2
Nos. for each shutter, Aluminium Handle – 1 no. for each
shutter. The rate is inclusive of cost and conveyance of all
materials to site, all labour charges,
incidental charges, cost of all consumables etc. and scaffolding
charges, form work, overheads & contractor profit etc. complete
for finished item of work in all floors.
368.1 Supplying and fixing of stainless steel (grade 304) hand Supplying and fixing of stainless Supplying and fixing of stainless steel
railing as per approved drawing with top rail of 50mm dia pipe steel (grade 304) hand railing (grade 304) hand railing
and 2mm thick medium class and vertical posts of 25mm dia
and 1.6mm thick medium class 1 No for each step fixed with
base plate of 75mm dia using bonding agent and anchor
fastner and welding, drilling of 25mm dia holes with pneumatic
compressor for fixing railing, buffing, polishing all members of
the railing thouroughly , lacquer finishing to present seamless
finish including cost and conveyance of all materials, electrodes,
welding charges, cost of all consumables, labour charges ,
overheads & contractors profit etc., complete for finished item of
work. for all floors
801 Supplying and fixing of stainless steel (grade 304) railing Supplying and fixing of stainless Supplying and fixing of stainless steel
for ramp as per approved drawing with top rail of 50mm dia steel (grade 304) railing for ramp (grade 304) railing for ramp
pipe and 2mm thick medium class fixed in to wall with 25mm dia
pipe of 0.30m length @ 1m centre to centre and welding,
buffing, polishing all members of the railing thouroughly ,
lacquer finishing to present seamless finish including cost and
conveyance of all materials, electrodes, welding charges, cost
of all consumables, labour charges , overheads & contractors
profit etc., complete for finished item of work.
4.6 Supply & fixing of Rolling shutter made of 80 x 1.25 mm Supply & fixing of Rolling shutter Supply & fixing of Rolling shutter made
machine rolled CRCA laths, interlocked together through their made of 80 x 1.25 mm of 80 x 1.25 mm
entire length and jointed together at the ends by end-locks,
mounted on specially designed pipe shaft of 50mm dia nominal
bore MS B class pipe with brackets, plates, guide channels,
stoppers, bottom locking plates and arrangements for inside &
outside locking with push-pull operations including cost of hood
cover and springs complete, painted with one coat of approved
steel primer, locks, ball bearings, all accessories etc.,
overheads & contractors profit complete for finished item of
work as per special spn: 1108
519 White washing two coats with white cement to ceiling to give White washing two coats with white White washing two coats with white
an even shade after thouroughly brushing the surface to remove cement to ceiling cement to ceiling
all dirt and remains of loose powdered materials including cost
of all materials , labour charges and incidental such as
scaffolding , lift charges etc., and overheads & contractors profit
complete for finished item of work in all floors.
First & Fifth Floors
47661 Providing and applying Wall putty of White Cement or Providing and applying Wall putty of Providing and applying Wall putty of
Polymer or Cement based of average 1 to 2 mm thickness over White Cement or Polymer or White Cement or Polymer or Cement
plastered surface to prepare the surface even and smooth after Cement based based
thoroughly brushing the surface to remove all dirt and remains
of loose powdered materials, applying emery paper, Sand the
surface, clean & wipe off loose dust, applying knifing paste filler
by putty knife / muslin pad, air dry for 2 - 3 hrs, sand with 180
and 320 No., emery paper for the surface preparation including
cost and conveyance of all materials to work site and all
operational, incidental, labour charges, over heads and
contractors profit etc., complete for finished item of work in all
floors for internal walls & Ceiling
Cellar to Fourth Floors
32534 Supply & application of one coat water based cement Supply & application of one coat Supply & application of one coat water
primer of interior grade I and two coats of synthetic water based cement primer of based cement primer of interior grade I
polymer luxury plastic emulsion paint of superior grade interior grade I and two coats of and two coats of synthetic polymer
having VOC (Volatile Organic Compound) content less than 50 synthetic polymer luxury plastic luxury plastic emulsion paint
grams/litre for internal walls including cost and conveyance of emulsion paint
all materials to site, incidental, operational and all labour
charges etc., and overheads & contractors profit complete for
finished item of work in all floors.
Cellar to Fifth Floors
#REF! Supply & application of one coat water based cement Supply & application of one coat Supply & application of one coat water
primer of exterior grade II and two coats of synthetic water based cement primer of based cement primer of exterior grade
polymer luxury plastic emulsion paint of superior grade exterior grade II and two coats of II and two coats of synthetic polymer
having VOC (Volatile Organic Compound) content less than 50 synthetic polymer luxury plastic luxury plastic emulsion paint
grams/litre for exterior walls including cost and conveyance of emulsion paint
all materials to site, incidental, operational and all labour
charges etc., and overheads & contractors profit complete for
finished item of work in all floors.
Cellar to Fifth Floors
4559 Providing and applying PMCC / Deco orient base or Providing and applying PMCC / Providing and applying PMCC / Deco
Equivalent exterior Texture of average 2 to 3 mm thickness Deco orient base or Equivalent orient base or Equivalent exterior
over plastered surface to prepare the surface even and smooth exterior Texture Texture
after thoroughly brushing the surface to remove all dirt and
remains of loose powdered materials, applying emery paper,
Sand the surface, clean & wipe off loose dust, applying putty/
texture paint filler by putty knife / muslin pad, air dry for 2-3
hrs for the surface preparation including cost and conveyance of
all materials to work site and all operational, incidental, labour
charges, scaffolding charges, overheads and contractors profit
etc., complete for finished item of work in all floors for external
walls
Cellar to Fifth Floors
84 Supply & applying Melamine Polish Glossy/ Matt finish to the Supply & applying Melamine Polish Supply & applying Melamine Polish
wood works duly cleaning the surface and applying emery Glossy/ Matt finish to the wood Glossy/ Matt finish to the wood works
paper, sand the wood with 180 No., emery paper and then with works
320 No., emery paper, clean & wipe off loose dust, applying
suitable knifing paste filler / wood filler by putty knife / muslin
pad, air dry for 2 - 3 hrs, sand with 180 and 320 No., emery
paper, apply two component wood sealer, air dry for 24 hrs,
sand with 320 No emery paper, applying one coat of approved
spraying thinner (for spraying)/ applying one coat of approved
brushing thinner or general purpose thinner (for brushing) and
apply (either with spray or brush) two coats of approved brand
melamine including cost & labour charges, emery papers, cost
of thinner & melamine polish, over heads and contractors profit
etc., complete for finished item of work
Basement Floor & First Floors
#REF! Painting two coats with synthetic enamel paint Grade-II Painting two coats with synthetic Painting two coats with synthetic
VOC (Volatile Organic Compound) content less than 50 enamel paint Grade-II VOC enamel paint Grade-II VOC
grams/litre over primer coat of red oxide to new iron work
including cost and conveyance of all materials to site, incidental,
operational and all labour charges etc., and overheads &
contractors profit complete for finished item of work in all floors.
(SS No. 1201, 1212 & 1207).
Cellar to Fifth Floors
347 Supplying and fixing of two shutter cupboards as per Supplying and fixing of two shutter Supplying and fixing of two shutter
drawing with medium teak wood frames of size 75mm x 40mm cupboards cupboards
and MDF Board Interior grade both sides laminated 18mm thick
for shutters with 18mm x 12mm teak wood beading alround
and supplying and fixing powder coated MS fixtures 3 Nos.
butt hinges of size 100mm long(for each shutter), tower bolt 2
Nos. of 100mm x 10mm, 2 Nos of handles 100mm long and
standard locking arrangements for shutters including cost and
conveyance of all materials to site, labour charges, over heads
and contractor profit etc., complete for finished item of work.
Cellar to Fourth Floors
2951 Supplying and fixing Gyp board Fine line Grid false ceiling Supplying and fixing Gyp board Supplying and fixing Gyp board Fine
(GS-FLC-4.6)using 12.5mm thick Gyp Board sheet tiles of Fine line Grid false ceiling line Grid false ceiling
size 595mm x 595mm conforming to IS 2095 - 1992 fixing to
Gyp steel precoated GI wall angle of size 25mm x 25mm x
0.70mm thick along the perimeter of ceiling screw fixed to brick
work / partition at 610mm center to center and suspending the
frame work using precoated GI Tee section (24mm x 38mm x
0.7mm) from soffit at 1220mm center to center fixed with GI
Soffit Cleat, rawl plugs and steel expansion fasteners &
connecting clip to the GI Tee section with 4mm dia GI rod with
galvanised spring steel level clip of PVC unversal holding clips
system at 1200mm center to center and fixing the 12.5mm
Gypboard sheet tiles of size 595mm x 595mm and finishing two
coats of drywall top coat, overheads and contractor profit
complete for finished item of work in all floors.
Third floor & Fourth Floors
1086 Suplying and fabricating, erecting and fixing in position Suplying and fabricating, erecting Suplying and fabricating, erecting and
tabular trusses of approved design with M.S tube conforming and fixing in position tabular trusses fixing in position tabular trusses
to I.S specifications including roof frame work consisting of
rafters,ties struts and purlins including cost of foundations bolts,
cleats, bearings plates,etc.,complete as per the sketch
enclosed and including cost of painting with enmel paint 2
coats over a primary coat with red oxide paint including cost and
conveyance of all materials, labour charges for fabrication and
fixing, hire charges of all tools and plants, all incidental charges,
overheads and contractor profit etc., complete for finished item
of work as directed by the Engineer-in-Charge
Fifth Floor :
170 Supplying and fixing 50mm dia nominal bore Medium Supplying and fixing 50mm dia Supplying and fixing 50mm dia
Grade properties & weight as per IS 1239 ISI mark MS Tube nominal bore Medium Grade nominal bore Medium Grade
for fixing of GI Sheet including cost and conveyance of all
materials to work site and all operational, incidental, labour
charges etc., complete for finished item of work in all floors for
stair case head room roof.
Fifth Floor :
191 Roofing with UV resistant multi-wall polycarbonate sheets of Roofing with UV resistant multi-wall Roofing with UV resistant multi-wall
any colour 6mm thick fixed with Aluminium Universal glazing polycarbonate sheets polycarbonate sheets
set 40mm wide and as per drawing etc., complete excluding the
cost of purlins, rafters,trusses,aluminium universal glazing set
40mm wide including cost and conveyance of all materials,
labour charges, overheads and contractors profit etc., complete
for finished item of work
Fifth Floor :
38 Supplying and fixing Aluminium Universal glazing set Supplying and fixing Aluminium Supplying and fixing Aluminium
40mm wide for jointing and fixing Polycarbonate sheets Universal glazing set Universal glazing set
including cost and conveyance of all materials, labour charges,
overheads and contractors profit etc., complete for finished item
of work
Fifth Floor :
#REF! Providing and fixing of Expansion joint filler board for Providing and fixing of Expansion Providing and fixing of Expansion joint
buildings, columns, beams and slabs 25 mm thick including cost joint filler board filler board
and conveyance of all materials to site, all incidental,
operational, labour charges etc.overheads & contractors profit
complete for finished item of work as per approved drawing for
all floors
Cellar to Fourth Floors
42 Providing and fixing of 24 gauge alluminium sheet over Providing and fixing of 24 gauge Providing and fixing of 24 gauge
expansion joint groove of width 15cm fixed to walls / columns alluminium sheet over expansion alluminium sheet over expansion joint
at one edge and resting over the other block walls/columns joint groove groove
concealing expansion joint with slotted holes for free edge of
aluminium sheet to facilitate free movement of aluminium sheet
over the finished surface of expansion joint and wall face using
sheet metal screws with nylon receiver complete including cost
and conveyance of all materials to site, all incidental,
operational, labour charges , overheads & contractors profit
etc., complete for finished item of work as per approved drawing
(for all floors for vertical joints and bottom of slab)
Cellar to Fourth Floors
42 Providing specialized polysulphide sealant treatment to the Providing specialized polysulphide Providing specialized polysulphide
expansion joints (Size : 25mm x 12mm) duly a). Chipping and sealant treatment to the expansion sealant treatment to the expansion
removing of existing covering on expansion joints b). Cleaning joints joints
of the surface from dirt, dust and other contaminations
c).Application of one coat of - High performance specially
designed SBR latex polymer based bonding agent d). Providing
and application of Acrylic Polymer modified reinstatement
concrete /mortar to the damaged edges of joint and making the
groove. e]. Providing and fixing of masking tape on top of the
joint both sides f). Providing and fixing of Back up support
material of Backer rod to leave the depth of 12mm on the joint
g). Providing and application of one coat of polysulphide primer
on inner edges of Joint. h). Providing and application of Two
part Polysulphide sealant to a width of 25mm and 12mm depth
with putty knife and neat finish i). Removing of masking tape
and providing and application of two coats of Acrylic elastomeric
cementitious coating including cost and conveyance of all
materials, labour charges, overheads & contractors profit etc.,
complete for finished item of work
Cellar to Fourth Floors
30 Supply and delivery of encapsulated plastic steps Supply and delivery of encapsulated Supply and delivery of encapsulated
manufactured as per companies standard specification plastic steps plastic steps
including cost of materials packing as per companiess
standards, loading, transportation, unloading and stacking at
site of work , etc.,as applicalble including labour charges for
fixing etc. complete for finished item of work.
2 Supplying & fixing 602 x 602 mm CI man hole frame and Supplying & fixing 602 x 602 mm CI Supplying & fixing 602 x 602 mm CI
cover (light weight) 30 Kgs including cost and conveyance man hole frame and cover (light man hole frame and cover (light
and labour charges for fixing, overheads and contractor profit weight) 30 Kgs weight) 30 Kgs
etc., complete for finished item of work
1814 Construction of Granular sub-base by providing HBG Construction of Granular sub-base Construction of Granular sub-base by
material confirming to Grading - III of MORT & H Table 400- by providing HBG material providing HBG material confirming to
2 including cost and conveyance of all material to woek site and confirming to Grading - III of MORT Grading - III of MORT & H Table 400-2
spreading in uniform layers with motor grader or by approved & H Table 400-2
means, on prepared surface mixing by mix place method with
Rotavator/ approved means, at OMC and compacting with
vibratory roller to achieve the desired density etc., complete for
finished item of work as per MoRT& H specification 401 (4th
revision) and as directed by the Engineer- in - charge (Payment
will be made based on levels for finished item of work)
1451 Construction of un-reinforced, dowel jointed at expansion Construction of un-reinforced, Construction of un-reinforced, dowel
and construction joint only, plain cement concrete dowel jointed at expansion and jointed at expansion and construction
pavement, thickness as per design, over a prepared sub base, construction joint only, plain cement joint only, plain cement concrete
with 43 grade cement or any other type as per Clause 1501.2.2 concrete pavement pavement
M30 (Grade), coarse and fine aggregates conforming to IS :
383, maximum in a concrete mixer of not less than 0.2 cum
capacity and appropeiate weigh batcher using approved mix
design, laid in approved fixed side formwork (steel channel,
laying and fixing of 125 mictron thick polythene film, wedges,
steel plates including levelling the formwork as per drawing),
spreading the concrete with sholvels, rakes, compacted using
needle, scareed and plate vibrators and finished in continuous
operation including provision of contraction and expansion,
construction joints, applying debonding strips, primer, sealant,
dowel bars, near approaches to bridge / culvert and
construction joints, admixtures as approved, curing of concrete
slabs for 14- days, curing compound (where specified) and
water finishing to lines and grade as per drawing and Technical
Specification Clause 1501 MORD.
#REF!
#REF!
A HOSPITAL BUILDING D
B 130 KLD SEWERAGE TREATMENT PLANT E
C 4 LAKH LITERS SUMP F
Quantity Amount
Sl. No. Description of Work
A Rate (Rs.)
1 Earth work excavation for foundations (Mechanical Means) for
buildings in ordinary soils and depositing on bank for all lifts
and with an initial lead of 10m and up to 3m depth including all
operational,incidental, labour charges such as shoring,
sheeting, planking, strutting etc., and overheads & contractors
profit complete for finished item of work excluding dewatering
charges etc., as per SS 20 B(APSS 308)
#REF! #REF!
a) Columns :
Cellar : 145.00 #REF! #REF!
i) ROOF SLABS :
i) Roof Slabs 125mm thick :
Cellar : 283.00 #REF! #REF!
a) Columns :
un supported height up to 4.27 m
Third Floor : 251.00 #REF! #REF!
b) Roof Beams
un supported height up to 4.27 m
Third Floor : 161.00 #REF! #REF!
#REF! #REF!
Cellar : 80.00
and SS cover plates with brass pivot and sigle piece MS Sheet
outer box with slide plate etc.complete (Weight Capacity
up to 130 Kgs) as approved by Engineer-in-Charge including
supply and fixing ISI marked powder coated aluminium fixtures
of 3 Nos. of butt hinges (IS:205) of 150mm long(for each
shutter), 4 Nos.tower bolts 10mm bolt (IS:204) 300mm long , 4
Nos.alluminium handles (IS:208) 150mm dia and 2 Nos.
aldrops (IS:2681) 300mm long including labour charges for
manufacturing door , fixing the door with required No. of screws
etc., including overheads & contractors profit complete for
finished item of work. (The Aluminium section used shall be
standard make confirming to IS 1948 – 1961) and as approved
by the Engineer) (2000mm x 2600mm)
Cellar : 26.00
Cellar : 3.90
Cellar : 6.24
Cellar : 22.68
Cellar : 110.00
Cellar : 36.96
Cellar : 72.36
After fixing frame the gap between frame and adjacent finished
wall shall be filled with weather proof silicon sealant over backer
rod of required size and of approved quality, all complete as per
approved drawing & direction of Engineer-in-Charge inclusive of
cost of Single / double glass panes and silicon sealant. Note:
For uPVC frame, sash and mullion extruded profiles minus
5%tolerance in dimension i.e. in depth & width of profile shall be
acceptable.Variation in profile dimension in higher side shall be
accepted. But, no extra payment on this account shall be made.
Cellar : 34.95
#REF! #REF!
First Ground :
Fifth Floor : 370.00
370.00 #REF! #REF!
Cellar : 3993.00
Cellar : 2156.00
Cellar : 478.00
Cellar : 319.00
Cellar : 107.98
Cellar : 18.00
Cellar : 3.00
Cellar : 7.00
Cellar : 7.00
#REF! #REF!
#REF! #REF!
#REF! #REF!
Cellar : #REF!
2 Earth work excavation for foundations (Mechanical 10909.00 CUM ONE CUM #REF! #REF!
Means) for buildings in ordinary soils and depositing
on bank for all lifts and with an initial lead of 10m and
3m to 6m depth including all operational,incidental,
labour charges such as shoring, sheeting, planking,
strutting etc., and overheads & contractors profit
complete for finished item of work excluding
dewatering charges etc., as per SS 20 B(APSS 308)
3 Earth work excavation for foundations (Mechanical 2621.00 CUM ONE CUM #REF! #REF!
Means) for buildings in ordinary rock (not requiring
blasting) and depositing on bank for all lifts and with an
initial lead of 10m and up to 3m depth including all
operational,incidental, labour charges such as shoring,
sheeting, planking, strutting etc., and overheads &
contractors profit complete for finished item of work
excluding dewatering charges etc., as per SS 20
B(APSS 308)
4 Earth work excavation for foundations for buildings in 575.00 CUM ONE CUM #REF! #REF!
hard rock (blasting prohibited) and depositing on bank
for all lifts and with an initial lead of 10m and up to 3m
depth including all operational,incidental, labour
charges such as shoring, sheeting, planking, strutting
etc., and overheads & contractors profit complete for
finished item of work excluding dewatering charges
etc., as per SS 20 B(APSS 308)
6 Filling with useful available excavated earth (excluding 20897.00 CUM ONE CUM #REF! #REF!
rock) with a lead of 50 m in trenches, sides of
foundations and basement with initial lead in layers not
exceeding 15cm thick, watering and ramming including
cost and conveyance of water to work site and all
operaitonal, incidental, labour charges, hire charges of
T&P etc., and overheads & contractors profit complete
for fnished item of work (APSS NO.309&310)
7 Conveyance of un-useful excavated earth to a 3690.00 CUM ONE CUM #REF! #REF!
distance of 5 KM for disposal including hire charges of
T & P, labour charges etc., and overheads &
contractors profit complete for finished item of work.
a) Columns :
Cellar Floor : 145.00 CUM ONE CUM #REF! #REF!
b) Lintels
Cellar Floor : 10.00 CUM ONE CUM #REF! #REF!
e) Roof Beams :
un supported height up to 3.66 m
Cellar Floor : 98.00 CUM ONE CUM #REF! #REF!
f) ROOF SLABS :
i) Roof Slabs 125mm thick :
Cellar Floor : 283.00 SQM ONE SQM #REF! #REF!
a) Columns :
un supported height up to 4.27 m
Third Floor : 251.00 CUM ONE CUM #REF! #REF!
b) Roof Beams
un supported height up to 4.27 m
Third Floor : 161.00 CUM ONE CUM #REF! #REF!
a Treads
Cellar Floor : 43.00 SQM ONE SQM #REF! #REF!
41 Providing 110 mm Dia ISI marked PVC down water 1107.00 RM ONE RM #REF! #REF!
take pipes with socket , 2.5mm thick 4.0 kg/sq.cm
pressure of ISI marked including cost of necessary
PVC Bends, shoes, iron / PVC clamps and all other
accessories and fixing in position including cost and
conveyance of all materials, operational & incidental
charges including all labour charges for fixing at site
etc., and overheads & contractors profit complete for
finished item of work. (APSS No. 1328)
6 Disposal of earth
Qty as per excavation 24583.99
Ded for Filling with Available Earth -20896.39
3689.60
Say 3690.00
b) RAFT
Raft-1 1 19.270 25.620 0.750 370.27
Raft-1 1 41.600 45.120 0.750 1407.74
Raft-1 1 9.280 14.290 0.750 99.46
Ded Of Duct -2 5.270 21.100 0.750 -166.80
Ded Of Duct -1 25.810 3.540 0.750 -68.53
For Lower Ground Floor
Raft-2 1 41.300 44.820 0.750 1388.30
Ded Of Duct -2 5.270 21.100 0.750 -166.80
Ded Of Duct -1 25.810 3.540 0.750 -68.53
2795.13
Say 2796.00
c) Pedestals
C1 13 1.050 1.050 0.600 8.60
C2 20 1.050 1.050 0.600 13.23
C3 12 1.050 1.050 0.600 7.94
C4 5 1.050 1.050 0.600 3.31
C5 10 1.050 1.050 0.600 6.62
C6 6 1.050 1.050 0.600 3.97
C7 4 1.050 1.050 0.600 2.65
C8 2 1.050 1.050 0.600 1.32
C9 2 1.050 1.050 0.600 1.32
C10 2 1.050 1.050 0.600 1.32
C11 7 1.050 1.050 0.600 4.63
c) Plinth Beams
Horizontal
Block-(-A)
T1-T7 1 13.810 0.300 0.400 1.66
Deduction of Columns -4 0.750 0.300 0.400 -0.36
T7-T10 2 7.700 0.300 0.600 2.77
T10-T16 2 13.810 0.300 0.400 3.31
Deduction of Columns -8 0.750 0.300 0.400 -0.72
Secondary Beam 1 6.850 0.300 0.400 0.82
Deduction of Columns -1 0.300 0.300 0.400 -0.04
Secondary Beam 1 6.820 0.300 0.400 0.82
Deduction of Columns -1 0.300 0.300 0.400 -0.04
Q1-Q5 1 9.520 0.300 0.400 1.14
Deduction of Columns -2 0.750 0.300 0.400 -0.18
Q5-Q10 1 11.250 0.300 0.600 2.03
O1-O5 4 9.520 0.300 0.600 6.85
O5-O12 4 16.290 0.300 0.400 7.82
8 VRCC
i Columns Upto GL
C1/RAFT-1 13 0.380 0.600 0.500 1.48
C2/RAFT-1 20 0.380 0.600 0.500 2.28
C3/RAFT-1 12 0.380 0.600 0.500 1.37
C4/RAFT-1 5 0.450 0.750 0.500 0.84
C5/RAFT-1 10 0.460 0.600 0.500 1.38
C6/RAFT-1 6 0.460 0.600 0.500 0.83
C7/RAFT-1 4 0.460 0.600 0.500 0.55
C8/F6 2 0.600 0.600 0.825 0.59
C9/F7 2 0.600 0.600 0.875 0.63
C10/RAFT-1 2 0.600 0.600 0.500 0.36
C11/RAFT-1 7 0.600 0.750 0.500 1.58
C12/RAFT-1 19 0.600 0.750 0.500 4.28
C13/RAFT-1 11 0.600 0.750 0.500 2.48
113 18.64
Say 19.00
iii
Columns Raft Top to Roof slab bottom
C1 13 0.380 0.600 3.475 10.30
C2 20 0.380 0.600 3.475 15.85
C3 12 0.380 0.600 3.475 9.51
C4 5 0.450 0.750 3.475 5.86
C5 10 0.460 0.600 3.475 9.59
C6 6 0.460 0.600 3.475 5.75
C7 4 0.460 0.600 3.475 3.84
C8 2 0.600 0.600 3.475 2.50
C9 2 0.600 0.600 3.475 2.50
C10 2 0.600 0.600 3.475 2.50
C11 7 0.600 0.750 3.475 10.95
C12 19 0.600 0.750 3.475 29.71
C13 11 0.600 0.750 3.475 17.20
113 126.06
Say 127.00
Total Qty of Columns
i Upto G.L 18.64
ii Above plinth 126.06
144.71
Say 145.00
9 Roof Beams
Horizontal
Block-(-A)
T1-T4 1 7.120 0.300 0.300 0.64
Deduction of Columns -2 0.750 0.300 0.300 -0.14
T4-T5 1 2.400 0.380 0.275 0.25
T5-T7 1 2.800 0.300 0.300 0.25
T7-T10 2 7.700 0.230 0.450 1.59
T10-T16 2 13.810 0.300 0.300 2.49
Deduction of Columns -8 0.750 0.300 0.300 -0.54
Secondary Beam 2 9.520 0.300 0.300 1.71
10 Roof slab
i) Roof Slab 125mm thick
Ramp Block 1 432.775 432.78
Ded Of Staircase -1 5.100 5.700 -29.07
Ded Of Lift -2 2.400 3.000 -14.40
Deduction of Ramp -1 5.100 21.000 -107.10
282.21
Say 283.00
11 Lintels
D2 1 1.960 0.225 0.175 0.08
D3 2 1.660 0.225 0.175 0.13
D5 11 1.360 0.225 0.175 0.59
D6 22 1.260 0.225 0.175 1.09
ALD1 2 2.460 0.225 0.175 0.19
FD1 3 2.460 0.225 0.175 0.29
FD2 2 1.960 0.225 0.175 0.15
W1 11 2.260 0.225 0.175 0.98
W2 12 1.960 0.225 0.175 0.93
W3 2 1.660 0.225 0.175 0.13
V1 12 2.260 0.225 0.175 1.07
V2 17 1.960 0.225 0.175 1.31
12 Sunshades
W1 11 2.100 23.10
W2 12 1.800 21.60
W3 2 1.500 3.00
JW 12 2.100 25.20
V1 12 2.100 25.20
V2 17 1.800 30.60
V5 38 0.900 34.20
162.90
Say 163.00
a Platforms
G toilets Wash Basins Platform 1 2.940 0.600 1.76
Store 1 2.895 0.600 1.74
Cold Store 1 2.895 0.600 1.74
L toilets Wash Basins Platform 1 2.940 0.600 1.76
Laboratory 1 2.500 0.600 1.50
8.50
Say 9.00
b Lofts
Store 1 2.895 0.600 1.74
Cold Store 1 2.895 0.600 1.74
Laboratory 1 3.000 0.600 1.80
House Keeping 1 6.230 0.600 3.74
9.01
Say 10.00
17 TMT STEEL
Columns Footings 23.67 90.000 Kgs/Cum 2130.48
Raft 2796.00 80.000 Kgs/Cum 223680.00
Pedestals 118.41 100.000 Kgs/Cum 11840.85
18 Mild Steel
Sunshades 162.90 4.000 Kgs/RM 651.60
Lofts & Platforms 19 4.000 Kgs/Sqm 76.00
Shelves 3.00 4.000 Kgs/Sqm 12.00
RBM 238.0 0.500 Kgs/Sqm 119.00
858.60
Say 0.86
19 External plastering
All round the Building Block-(-A) 1 155.450 3.600 559.62
All round the Building Ramp Block 1 106.113 3.600 382.01
Deductions
W1 -11 1.800 1.800 -35.64
W2 -12 1.500 1.800 -32.40
W3 -2 1.200 1.800 -4.32
JW -12 1.800 1.800 -38.88
V1 -12 1.800 0.500 -10.80
V2 -17 1.500 0.500 -12.75
V5 -38 0.600 0.500 -11.40
795.44
Say 796.00
20 Ceiling plastering
Qty Same as Ceramic tile flooring 78.00
Qty Same as Vitrified flooring 369.00
Qty Same as Chequered flooring 102.00
Qty Same as Granite flooring 143.29
Qty Same as VDF flooring 1144.00
1836.29
Say 1837.00
d) Granite Slabs
Infront Staircase-1 1 2.400 6.280 15.07
Staircase Midlanding 1 2.000 4.430 8.86
Under Staircase 1 5.300 4.430 23.48
Infront Staircase-2 1 4.300 2.450 10.54
Staircase Midlanding 1 2.000 4.300 8.60
Under Staircase 1 4.300 5.300 22.79
Infront Staircase-3 1 5.100 2.480 12.65
Staircase Midlanding 1 5.100 2.400 12.24
Under Staircase 1 5.100 5.700 29.07
143.29
Say 144.00
e) Chequered tiles
Ramp 2 2.400 18.000 86.40
Ramp Mid Landing 1 5.100 3.000 15.30
101.70
Say 102.00
e) Intenrlocking Tiles
Entrance Ramp 1 5.000 15.965 79.83
79.83
Say 80.00
f) VDF Flooring
Parking 1 35.320 33.740 1191.70
Ded Of Toilet -1 4.530 10.610 -48.06
1143.63
Say 1144.00
23 Skirting
a) Skirting with Vitrified Tiles
Electrical Room 1 11.105 11.11
Store 1 8.315 8.32
Lobby 1 3.575 3.58
Lobby 2 8.145 16.29
25 Dadooing in corridor
3.0 m wide corridor 1 9.690 1.500 14.54
Deductions
D5 -2 0.900 1.500 -2.70
FD1 -2 2.000 1.500 -6.00
5.84
Say 6.00
ii Risers
Staircase-1&2 2 24 2.000 0.150 14.40
Staircase-3 1 24 2.400 0.150 8.64
23.04
Say 24.00
26 High polished granite platforms
Qty same as Platforms 9.00
9.00
Say 9.00
30 Wall putty
Same as internal plastering 2156.00
2156.00
Say 2156.00
32
Emulsion paint for external plastering
Same as of external plastering @ 60% 477.60
477.60
Say 478.00
33
Emulsion paint for external plastering
Same as of external plastering @ 40% 318.40
318.40
Say 319.00
35 Doors
ALD Doors
ALD1 (2.0X 2.60) 5 2.000 2.600 26.00
Say 26.00
36 Windows
W1 11 1.800 1.800 35.64
W2 12 1.500 1.800 32.40
W3 2 1.200 1.800 4.32
Total Quantity 72.36
40 Ventilators
V1 12 1.800 0.500 10.80
V2 17 1.500 0.500 12.75
V5 38 0.600 0.500 11.40
34.95
41 Structural Glazing
staire case at Ramp 2 1.800 3.000 10.80
10.80
Say 11.00
42 Structural Glazing with top hung
shutters
20% of above quantity 2.16
2.16
Say 3.00
43 Railing
All round the staircase 1 7.350 0.900 6.62
45 Cupboards
Store 1 2.000 2.100 4.20
Cold Store 2 2.000 2.100 8.40
House Keeping 1 2.500 2.100 5.25
17.85
Say 18.00
46 Mastic pad
Roof beams
Horizontal 1 3.460 0.450 1.56
PB 1 3.460 0.300 1.04
2.60
Say 3.00
48 Aluminium sheet
Roof beams
Horizontal 1 3.460 3.46
PB 1 3.460 3.46
6.92
Say 7.00
Cum
Cum
Cum
Cum
Cum
Cum
Cum
Cum
Cum
Cum
Cum
Cum
Cum
Cum
Cum
Cum
Cum
Sqm
Cum
Cum
Cum
Cum
Sqm
Sqm
Sqm
Sqm
Cum
RM
Sqm
Sqm
Sqm
Sqm
cum
Cum
sqm
cum
Cum
MT
MT
Sqm
Sqm
Sqm
Sqm
Sqm
Sqm
Sqm
Sqm
Sqm
Sqm
Sqm
Rmt
Rmt
Sqm
Sqm
Sqm
Sqm
Sqm
Sqm
Sqm
Sqm
Sqm
Sqm
Sqm
Sqm
Sqm
Sqm
Sqm
RM
Sqm
Sqm
Sqm
Sqm
Kgs
Sqm
Sqm
Sqm
Sqm
Sqm
Sqm
Sqm
Rmt
Sqm
Sqm
Rmt
Rmt
2 Tie Beam
Add extra Quantity for level difference 1 290.000 0.300 0.400 34.80
Say 35.00 Cum
4 VRCC
i Columns Upto GL
C4/RAFT-1 5 0.450 0.750 0.500 0.84
C5/RAFT-1 8 0.460 0.600 0.500 1.10
C6/RAFT-1 6 0.460 0.600 0.500 0.83
C7/RAFT-1 4 0.460 0.600 0.500 0.55
C8/F6 2 0.600 0.600 0.825 0.59
C9/F7 2 0.600 0.600 0.875 0.63
C10/RAFT-1 2 0.600 0.600 0.500 0.36
C11/RAFT-1 7 0.600 0.750 0.500 1.58
C12/RAFT-1 19 0.600 0.750 0.500 4.28
C13/RAFT-1 11 0.600 0.750 0.500 2.48
Add extra Quantity for level difference 33 0.450 0.750 2.000 22.28
99 35.51
Say 36.00 Cum
5 Roof Beams
Horizontal
Block-A
T1-T4 1 7.120 0.300 0.300 0.64
Deduction of Columns -2 0.750 0.300 0.300 -0.14
T4-T5 1 2.400 0.380 0.275 0.25
T5-T7 1 2.800 0.300 0.300 0.25
T7-T10 2 7.700 0.230 0.450 1.59
T10-T16 2 13.810 0.300 0.300 2.49
Deduction of Columns -8 0.750 0.300 0.300 -0.54
Secondary Beam 2 9.520 0.300 0.300 1.71
Deduction of Columns -2 0.230 0.300 0.300 -0.04
Q1-Q2 1 3.310 0.300 0.300 0.30
Q2-Q4 1 2.310 0.380 0.300 0.26
Q4-Q5 1 2.400 0.380 0.275 0.25
Q5-Q10 1 11.250 0.230 0.450 1.16
Q10-Q12 1 2.800 0.300 0.300 0.25
Q12-Q13 1 2.400 0.380 0.275 0.25
Q13-Q16 1 7.120 0.300 0.300 0.64
O1-O5 4 9.520 0.450 0.575 9.85
O5-O12 2 16.290 0.300 0.275 2.69
Deduction of Columns -8 0.750 0.300 0.275 -0.50
M5-M8 4 4.170 0.300 0.275 1.38
O12-O16 4 9.520 0.450 0.575 9.85
G1-G16 2 35.320 0.300 0.300 6.36
Deduction of Columns -4 0.450 0.300 0.300 -0.16
Deduction of Columns -8 0.600 0.300 0.300 -0.43
E1-E3 1 4.300 0.300 0.400 0.52
Cantilever Beams 2 1.000 0.300 0.300 0.18
Ramp Block
R19-R21 5 5.100 0.230 0.355 2.08
Deduction of Columns -4 0.380 0.230 0.355 -0.12
K17-K19 4 5.860 0.230 0.275 1.48
Deduction of Columns -8 0.380 0.230 0.275 -0.19
I17-I23 1 16.820 0.230 0.275 1.06
6 Roof slab
i) Roof Slab 125mm thick
Ramp Block 1 432.775 432.78
Ded Of Staircase -1 5.100 5.700 -29.07
Ded Of Lift -2 2.400 3.000 -14.40
Deduction of Ramp -1 5.100 21.000 -107.10
282.21
Say 283.00 Sqm
7 Lintels
MD1 1 3.460 0.225 0.175 0.14
D2 19 1.960 0.225 0.175 1.47
D3 9 1.660 0.225 0.175 0.59
D5 28 1.360 0.225 0.175 1.50
D6 43 1.260 0.225 0.175 2.13
ALD1 5 2.460 0.225 0.175 0.48
FD1 8 2.460 0.225 0.175 0.77
FD2 2 1.960 0.225 0.175 0.15
W1 43 2.260 0.225 0.175 3.83
W2 23 1.960 0.225 0.175 1.78
W3 2 1.660 0.225 0.175 0.13
V1 16 2.260 0.225 0.175 1.42
V2 22 1.960 0.225 0.175 1.70
V5 68 1.060 0.225 0.175 2.84
JW 23 2.260 0.225 0.175 2.05
Lift 2 1.460 0.225 0.175 0.11
21.09
Say 22.00 Cum
8 Sunshades
W1 43 2.100 90.30
W2 23 1.800 41.40
W2 2 1.800 3.60
JW 23 2.100 48.30
V1 16 2.100 33.60
V2 22 1.800 39.60
V5 68 0.900 61.20
318.00
Say 318.00 RM
a Platforms
Block-A
G toilets Wash Basins Platform 1 2.940 0.600 1.76
Store 1 3.045 0.600 1.83
Store 1 4.800 0.600 2.88
Clean Linen 1 4.800 0.600 2.88
Pharmacy 1 5.965 0.600 3.58
Police Out Post 1 2.515 0.600 1.51
Rec 1 5.780 0.600 3.47
Rec 1 3.780 0.600 2.27
Nurse Station 1 3.000 0.600 1.80
Console 1 3.385 0.600 2.03
Block-(-B)
G toilets Wash Basins Platform 2 1.620 0.600 1.94
Store 1 3.045 0.600 1.83
Issueing 1 4.800 0.600 2.88
Bio Chemistry Lab 1 22.855 0.600 13.71
Pathology Lab 1 23.620 0.600 14.17
Micro Biology Lab 1 21.455 0.600 12.87
b Lofts
Block-A
Store 1 3.045 0.600 1.83
Store 1 4.800 0.600 2.88
Clean Linen 1 4.800 0.600 2.88
Nurse Station 1 3.000 0.600 1.80
Console 1 3.385 0.600 2.03
Ramp Block
Laboratory 1 3.000 0.600 1.80
House Keeping 1 6.230 0.600 3.74
Block-(-B)
Store 2 3.000 0.600 3.60
Chemical Store 1 6.160 0.600 3.70
Drug Store 1 7.000 0.600 4.20
Medico Legal Store 1 7.000 0.600 4.20
Medical Store 1 4.800 0.600 2.88
Surgical Store 1 4.800 0.600 2.88
Celan Store 1 4.800 0.600 2.88
Office 1 4.800 0.600 2.88
Tailoring 1 4.800 0.600 2.88
47.05
Say 48.00 Sqm
13 TMT STEEL
Tie beams 34.80 100.000 Kgs/Cum 3480.00
230mm thick Retaining wall 1097.2 22.000 Kgs/Sqm 24137.66
Columns upto 3.60 mts levael 251.00 200.000 Kgs/Cum 50200.00
Roof beams 161.00 200.000 Kgs/Cum 32200.00
125mm thick Roof slab 283.0 10.000 Kgs/Sqm 2830.00
150mm thick Roof slab 1786.00 12.000 Kgs/Sqm 21432.00
175mm thick Roof slab 944.00 14.000 Kgs/Sqm 13216.00
175mm thick waist slab 226.00 14.000 Kgs/Sqm 3164.00
Lintels 22 80.000 Kgs/Cum 1760.00
152419.66
Say 152.40 MT
14 Mild Steel
Sunshades 318.00 4.000 Kgs/Rm 1272.00
Lofts & Platforms 120 4.000 Kgs/Sqm 480.00
Shelves 40.00 4.000 Kgs/Sqm 160.00
Sillslab 1.549 4.000 Kgs/Sqm 6.20
15 External plastering
All round the Building Block-(A) 1 155.450 3.600 559.62
Duct Shorter Side 2 6.000 1.000 12.00
Duct Shorter Side 2 18.575 3.600 133.74
All round the Building Ramp Block 1 106.113 3.600 382.01
All round the Building Block-(-B) 1 155.450 3.600 559.62
Duct Shorter Side 2 6.000 1.000 12.00
Duct Shorter Side 2 18.575 3.600 133.74
Deductions
W1 -43 1.800 1.800 -139.32
W2 -23 1.500 1.800 -62.10
W3 -2 1.200 1.800 -4.32
JW -23 1.800 1.800 -74.52
V1 -16 1.800 0.500 -14.40
V2 -22 1.500 0.500 -16.50
V5 -68 0.600 0.500 -20.40
1461.17
Say 1462.00 Sqm
16 Ceiling plastering
Qty Same as Ceramic tile flooring 249.00
Qty Same as Vitrified flooring 1444.00
Qty Same as Chequered flooring 102.00
Qty Same as Granite flooring 985.85
2780.85
Say 2781.00 Sqm
18 Flooring
a) Ceramic Tile Flooring
Block-A
L Toilet 1 3.830 1.620 6.20
L Toilet Corridor 1 3.230 1.200 3.88
WC 4 1.200 1.500 7.20
G Toilet 1 3.995 1.500 5.99
G Toilet Lobby 1 1.360 1.620 2.20
WC 2 1.200 1.500 3.60
Staff Toilet 1 1.200 1.800 2.16
Ward Attached Toilets 2 1.500 1.800 5.40
d) Granite Slabs
Entrance Portico 1 1 5.320 2.000 10.64
Infront Staircase-1 2 1 2.400 6.280 30.14
Staircase Midlanding 2 1 2.000 4.430 17.72
Infront Staircase-2 2 1 4.300 2.450 21.07
Staircase Midlanding 2 1 2.000 4.300 17.20
Infront Staircase-3 1 1 5.100 2.480 12.65
Staircase Midlanding 1 1 5.100 2.400 12.24
Lobby 1 2.350 2.810 6.60
Entrance Foyer 1 20.900 8.710 182.04
Corridor 1 21.750 3.000 65.25
Corridor 1 2.400 28.430 68.23
Corridor 1 2.400 18.810 45.14
Corridor 1 30.900 3.000 92.70
Infront Lift 2 2.400 3.000 14.40
Corridor 1 23.390 3.000 70.17
Corridor Lobby 1 10.360 3.230 33.46
Corridor 1 14.400 3.000 43.20
Corridor Lobby 1 5.070 1.730 8.77
Corridor 1 4.070 3.000 12.21
Corridor 1 2.400 25.130 60.31
Corridor 1 2.400 18.810 45.14
Corridor 1 30.790 3.000 92.37
Corridor 1 12.090 2.000 24.18
985.85
Say 986.00 Sqm
e) Chequered tiles
Ramp 2 2.400 18.000 86.40
Ramp Mid Landing 1 5.100 3.000 15.30
101.70
Say 102.00 Sqm
f) Interlocking Tiles
Entrance Ramp At Portico 2 5.000 2.000 20.00
Portico 1 14.250 6.240 88.92
108.92
Say 109.00 Sqm
19 Skirting
a) Skirting with Vitrified Tiles
Block-A
Service Corridor 2 21.420 42.84
Infront Toilets 1 8.920 8.92
21 Dadooing in corridor
Block-A
Corridor 1 43.500 1.500 65.25
Entrance Corridor 1 61.800 1.500 92.70
Corridor 1 38.080 1.500 57.12
Corridor 1 56.860 1.500 85.29
Ramp Block
3.0 m wide corridor 1 13.160 1.500 19.74
3.0 m wide corridor 1 23.390 1.500 35.09
Block-(-B)
Corridor 1 37.420 1.500 56.13
Corridor 1 61.580 1.500 92.37
Corridor 1 38.080 1.500 57.12
Corridor 1 56.860 1.500 85.29
Deductions
ALD1 -2 2.000 1.500 -6.00
FD1 -6 2.000 1.500 -18.00
MD1 -1 3.000 1.500 -4.50
D2 -15 1.500 1.500 -33.75
D3 -3 1.200 1.500 -5.40
D5 -13 0.900 1.500 -17.55
D6 -2 0.800 1.500 -2.40
558.50
Say 559.00 Sqm
ii Risers
Staircase-1&2 4 28 2.000 0.150 33.60
Staircase-3 1 28 2.400 0.150 10.08
43.68
27 Wall putty
Same as internal plastering 6083.00
6083.00
Say 6083.00 Sqm
33 Doors
ALD Doors
ALD1 (2.0X 2.60) 13 2.000 2.600 67.60
Say 67.60 Sqm
34 Windows
2 Track Sliding Windows
W1 40 1.800 1.800 129.60
W2 17 1.500 1.800 45.90
W3 3 1.200 1.800 6.48
Total Quantity 181.98 Sqm
35
MS Grill for Windows @ 15 Kg/Sqm
W1 44 1.800 1.800 142.56
W2 17 1.500 1.800 45.90
W3 3 1.200 1.800 6.48
Ventilators
V5 66 0.600 0.500 19.80
214.74
Say 215.00 Sqm
3225.00 Kgs
36 RCC Jally Windows
JW 24 1.800 1.800 77.76
77.76
Say 78.00 Sqm
38 Ventilators
V5 66 0.600 0.500 19.80
Say 19.80 Sqm
39 Structural Glazing
staire case at Ramp 2 1.800 3.000 10.80
10.80
Say 11.00 Sqm
40 Railing
All round the staircase 2 1 7.350 0.900 13.23
All round the staircase 2 1 7.350 0.900 13.23
All round the staircase 1 1 7.350 0.900 6.62
All round the ramp 1 1 36.000 0.900 32.40
65.48
Say 66.00 Sqm
41 Grip bar
Staircase 2 1 15.030 30.06
Staircase 2 1 14.900 29.80
Staircase 1 1 16.500 16.50
Ramp 1 1 47.100 47.10
PHC Toilet 1 1 7.800 7.80
PHC Toilet 1 1 7.500 7.50
PHC Toilet 1 1 8.690 8.69
Entrance Ramp 1 2 9.000 18.00
165.45
Say 166.00 Rmt
42 Cupboards
Pharmacy Issue 1 2.000 2.100 4.20
Nurse Station 1 2.000 2.100 4.20
Store 3 2.500 2.100 15.75
Clean Linen Store 1 2.500 2.100 5.25
Rec 1 2.500 2.100 5.25
Lab 1 2.500 2.100 5.25
Store 1 2.500 2.100 5.25
Drug Store 2 2.500 2.100 10.50
Surgical Store 2 2.500 2.100 10.50
Medical Store 2 2.500 2.100 10.50
Tailoring 1 2.000 2.100 4.20
Celen Store 1 2.000 2.100 4.20
Chemical Store 1 2.000 2.100 4.20
Bio Chemistry Lab 2 2.000 2.100 8.40
Pathology Lab 2 2.000 2.100 8.40
Micro Biology Lab 2 2.000 2.100 8.40
114.45
Say 115.00 Sqm
43 RCM Drop
Entrance Portico 1 33.730 0.450 15.18
15.18
Say 16.00 Sqm
44 False ceiling
Qty Same as Vitrified flooring 1 1444.00 1444.00
Qty Same as Granite flooring 1 985.85 985.85
2429.85
Say 2430.00 Sqm
45 Mastic pad
Roof beams
47 Aluminium sheet
Roof beams
Horizontal 2 3.460 6.92
6.92
Say 7.00 Rmt
48 Impervious coat for terrace
Portico 1 14.830 9.980 148.00
148.00
Say 149.00 Sqm
2 Roof Beams
Horizontal
Block-A
T1-T4 1 7.120 0.300 0.300 0.64
Deduction of Columns -2 0.750 0.300 0.300 -0.14
T4-T5 1 2.400 0.380 0.275 0.25
T5-T7 1 2.800 0.300 0.300 0.25
T7-T10 2 7.700 0.230 0.450 1.59
T10-T16 2 13.810 0.300 0.300 2.49
Deduction of Columns -8 0.750 0.300 0.300 -0.54
Secondary Beam 2 9.520 0.300 0.300 1.71
Deduction of Columns -2 0.230 0.300 0.300 -0.04
Q1-Q2 1 3.310 0.300 0.300 0.30
Q2-Q4 1 2.310 0.380 0.300 0.26
Q4-Q5 1 2.400 0.380 0.275 0.25
Q5-Q10 1 11.250 0.230 0.450 1.16
Q10-Q12 1 2.800 0.300 0.300 0.25
Q12-Q13 1 2.400 0.380 0.275 0.25
Q13-Q16 1 7.120 0.300 0.300 0.64
O1-O5 4 9.520 0.450 0.575 9.85
3 Roof slab
iii) Roof Slab 175mm thick
H1-H5 x H1-O1 2 2 9.980 19.040 760.08
H31-H32 x H31-O31 1 1 6.460 19.040 123.00
B31-B32 x B31-G31 1 1 6.760 8.940 60.43
943.51
Say 944.00 Sqm
i) Roof Slab 150mm thick
Block-(A) 1 40.600 35.780 1452.67
Block-(B) 1 40.600 35.780 1452.67
Ded Of Staircase -2 5.300 4.430 -46.96
Ded Of Staircase -2 4.300 5.300 -45.58
Ded Of Duct -2 6.000 18.575 -222.90
Deduct Double Height Portion -1 15.830 8.480 -134.24
Portico Slab 1 14.250 9.750 138.94
Deduction of 175mm Thick Slab -943.51
1651.09
Say 1652.00 Sqm
ii) Roof Slab 125mm thick
c Racks
Injection room(male) 3 1 3.140 0.450 4.24
Injection room(female) 3 1 3.140 0.450 4.24
8.48
Say 9.00 Sqm
10 Sunshades
W1 68 2.100 142.80
W2 5 1.800 9.00
W3 1 1.500 1.50
153.30
Say 154.00 Rmt
13 Mild Steel
Sunshades 153.30 4.000 Kgs/RM 613.20
Platforms & Lofts 33.087 4.000 Kgs/Sqm 132.35
Shelves 9.000 4.000 Kgs/Sqm 36.00
Sillslab 1.899 4.000 Kgs/Sqm 7.60
RBM 1357.3 0.050 Kgs/Sqm 67.86
857.01
Say 0.86 MT
14 External plastering
All round the Building 1 411.000 3.600 1479.60
All round the Open Courtyard 2 49.150 2.230 219.21
Open court yard wall 2 49.150 3.600 353.88
Deductions
W1 -68 1.800 1.800 -220.32
W2 -5 1.500 1.800 -13.50
W3 -1 1.200 1.800 -2.16
V5 -54 0.600 0.500 -16.20
1800.51
Say 1801.00 Sqm
15 Ceiling plastering
Qty Same as Vitrified flooring 900.00
Qty Same as Ceramic flooring 312.00
Qty Same as Granite Slab Flooring 1367.00
17 Flooring
a) Vitrified flooring
BLOCK-A1
Receiption at Nephrology & Urology 2 4.915 3.000 29.49
Renal Lab 1 4.800 3.000 14.40
Stores at Toilets 2 4.085 3.000 24.51
Electrical Room 1 3.995 3.115 12.44
Class IV Room 1 3.995 3.115 12.44
Uro dynamic Lab 1 4.800 3.000 14.40
Deduct Toilet -1 1.315 1.615 -2.12
Uro flowmetry room 1 4.800 3.000 14.40
Urology -OP 1,2,3,4 4 4.800 3.000 57.60
Technician Room 1 4.800 3.000 14.40
Nephrology-OP 1,2,3,4 4 4.800 3.000 57.60
Procedure Room 2 4.800 3.000 28.80
Store at Dept.Seminar Room 1 4.300 2.400 10.32
Dept.Seminar Room 2 4.835 8.480 82.00
Attendants waiting rooms 2 4.315 6.045 52.17
Laboratory & Security 2 3.000 3.000 18.00
House keeping & Floor Administration 2 3.000 6.230 37.38
Dedct Toilet -2 1.315 1.915 -5.04
Server Room 1 4.565 5.965 27.23
Store at Dept.Seminar Room 1 4.565 2.400 10.96
Block-B
Reception & Registration 1 4.680 8.595 40.22
Pharmacy issue counter 1 4.680 8.595 40.22
Security 1 4.300 2.400 10.32
Sample collection 1 4.785 3.000 14.36
Injection Rooms Male & Female 2 3.140 3.000 18.84
Stores at Toilets 2 3.830 3.000 22.98
Class IV Room 1 3.950 3.000 11.85
Electrical Room 1 3.950 3.000 11.85
Stores 2 2.635 3.045 16.05
Dressing Male &Female 2 4.800 3.000 28.80
Plaster room 1 4.800 3.000 14.40
G.Surgery-OP 1,2,3,4 4 4.800 3.000 57.60
Minor OT 1 4.800 3.000 14.40
ECG Room 1 4.800 3.000 14.40
General Medicine-OP 1,2,3,4 4 4.800 3.000 57.60
Stress test 1 4.800 3.000 14.40
ii Risers
Staircase 4 24 2.000 0.150 28.80
Staircase 1 24 2.415 0.150 8.69
Entrance 1 6 5.315 0.150 4.78
42.28
Say 43.00 Sqm
f) Interlocking Tiles
Entrance Ramp At Portico 2 5.000 2.000 20.00
Portico 1 14.250 6.240 88.92
27 Wall putty
Same as internal plastering 6067.00
6067.00
Say 6067.00 Sqm
29
Emulsion paint for external plastering
Same external plastering @ 60% 1080.60
1080.60
Say 1081.00 Sqm
31 Doors
MD1 1 6.100 3.000 18.30
18.30
Say 18.30 Sqm
33 Ventilators
V5 66 0.600 0.500 19.80
19.80
Say 19.80 Sqm
34
MS Grill for Windows @ 15 Kg/Sqm
W1 68 1.800 1.800 220.32
W2 5 1.500 1.800 13.50
W3 1 1.200 1.800 2.16
staire case at Ramp 2 1.856 3.000 11.14
At Entrance 2 2.400 3.000 14.40
V5 54 0.600 0.500 16.20
277.72 Sqm
Say 278.00 Sqm
4170.00 Kgs
36 Structural Glazing
staire case at Ramp 2 1.856 3.000 11.14
At Entrance 2 2.400 3.000 14.40
At Double height 2 2.400 3.000 14.40
At Double height 1 5.165 3.000 15.50
55.43
Say 56.00 Sqm
37 Structural Glazing with top hung
shutters
20% of above quantity 11.09
11.09
Say 12.00 Sqm
38 Jali wall
40 Grip bar
Staircase 5 14.830 74.15
Ramp 1 47.100 47.10
121.25
Say 122.00 Rmt
38 RCM Drop
Entrance Portico 1 33.730 0.450 15.18
Duct 2 1 6.000 0.450 5.40
20.58
Say 21.00 Sqm
41 False ceiling
Qty Same as Vitrified flooring 899.68
899.68
Say 900.00 Sqm
42 Mastic pad
Roof beams
Horizontal 2 3.460 0.450 3.11
3.11
Say 4.00 Sqm
44 Aluminium sheet
Roof beams
Horizontal 2 3.460 6.92
6.92
Say 7.00 Rmt
2 Roof Beams
Horizontal
Block-A
T1-T4 1 7.120 0.300 0.300 0.64
Deduction of Columns -2 0.750 0.300 0.300 -0.14
T4-T5 1 2.400 0.380 0.275 0.25
T5-T7 1 2.800 0.300 0.300 0.25
T7-T10 2 7.700 0.230 0.450 1.59
T10-T16 2 13.810 0.300 0.300 2.49
Deduction of Columns -8 0.750 0.300 0.300 -0.54
Secondary Beam 2 9.520 0.300 0.300 1.71
Deduction of Columns -2 0.230 0.300 0.300 -0.04
Q1-Q2 1 3.310 0.300 0.300 0.30
Q2-Q4 1 2.310 0.380 0.300 0.26
Q4-Q5 1 2.400 0.380 0.275 0.25
Q5-Q10 1 11.250 0.230 0.450 1.16
Q10-Q12 1 2.800 0.300 0.300 0.25
Q12-Q13 1 2.400 0.380 0.275 0.25
Q13-Q16 1 7.120 0.300 0.300 0.64
3 Roof slab
iii) Roof Slab 175mm thick
H1-H5 x H1-O1 2 2 9.980 19.040 760.08
H31-H32 x H31-O31 1 1 6.460 19.040 123.00
B31-B32 x B31-G31 1 1 6.760 8.940 60.43
943.51
Say 944.00 Sqm
i) Roof Slab 150mm thick
Block-(A) 1 40.600 35.780 1452.67
Block-(B) 1 40.600 35.780 1452.67
Ded Of Staircase -2 5.780 4.300 -49.71
Ded Of Staircase -2 5.170 4.300 -44.46
Ded Of Duct -2 6.000 18.440 -221.28
Ded Of Dumb Waiter -2 1.500 1.200 -3.60
Deduction of 175mm Thick Slab -943.51
1642.78
c Racks
Reception 1 2 2.000 0.450 1.80
Stores 2 1 2.500 0.450 2.25
Dialyzer Storage 1 1 2.500 0.450 1.13
Laboratory 1 1 2.000 0.450 0.90
Pay Rooms 1 9 2.000 0.450 8.10
Pantry 2 1 2.500 0.450 2.25
16.43
Say 17.00 Sqm
5 230mm thick brick masonary
Horizontal
Block A2
Toilet Block to Dirty Utility 2 13.810 0.225 3.150 19.58
Deduction of columns -8 0.750 0.225 3.000 -4.05
Staircase 2 7.700 0.225 3.000 10.40
Toilet Block to Store 2 13.810 0.225 3.150 19.58
Deduction of columns -8 0.750 0.225 3.000 -4.05
Passage Beside Toilet Block 2 6.400 0.225 3.450 9.94
9 Lintels
W1 33 2.260 0.225 0.175 2.94
W2 78 1.960 0.225 0.175 6.02
W3 10 1.660 0.225 0.175 0.65
W4 5 1.360 0.225 0.175 0.27
V5 76 1.060 0.225 0.175 3.17
JW 24 2.260 0.225 0.175 2.14
D3 7 1.660 0.225 0.175 0.46
D5 40 1.260 0.225 0.175 1.98
D6 60 1.060 0.115 0.175 1.28
FD-1 12 2.460 0.225 0.175 1.16
FD-2 2 1.960 0.225 0.175 0.15
Strucural Glazing
SG 2 2.260 0.225 0.175 0.18
ALD-1 8 2.460 0.115 0.175 0.40
20.80
Say 21.00 Cum
10 Sunshades
W1 33 2.100 69.30
W2 78 1.800 140.40
W3 10 1.500 15.00
W4 5 1.200 6.00
230.70
Say 231.00 Rmt
11 Sill slabs
W1 33 2.260 0.230 0.050 0.86
W2 78 1.960 0.230 0.050 1.76
W3 10 1.660 0.230 0.050 0.19
W4 5 1.360 0.230 0.050 0.08
V5 76 1.060 0.230 0.050 0.93
3.81
Say 3.90 cum
12 TMT STEEL
Columns upto 3.60 mts levael 213.92 200.000 Kgs/Cum 42784.06
Roof beams 160.69 200.000 Kgs/Cum 32137.52
125mm thick Roof slab 283.84 10.000 Kgs/Sqm 2838.37
150mm thick Roof slab 1642.8 12.000 Kgs/Sqm 19713.32
175mm thick Roof slab 943.5 14.000 Kgs/Sqm 13209.13
175mm thick waist slab 247.20 14.000 Kgs/Sqm 3460.80
Lintels 20.80 80.000 Kgs/Cum 1663.85
115807.04
Say 115.80 MT
13 Mild Steel
Sunshades 230.70 4.000 Kgs/RM 922.80
Platforms & Lofts 39.000 4.000 Kgs/Sqm 156.00
Shelves 16.425 4.000 Kgs/Sqm 65.70
Sillslab 3.811 4.000 Kgs/Sqm 15.25
14 External plastering
All round the Building 1 421.977 3.600 1519.12
Duct Shorter Side 4 6.000 1.000 24.00
Duct Shorter Side 4 18.575 3.600 267.48
Deductions
W1 -33 1.800 1.800 -106.92
W2 -78 1.500 1.800 -210.60
W3 -10 1.200 1.800 -21.60
w4 -5 0.900 1.800 -8.10
V5 -76 0.600 0.500 -22.80
1440.58
Say 1441.00 Sqm
15 Ceiling plastering
Qty Same as Vitrified flooring 2352.00
Qty Same as Ceramic flooring 180.00
Qty Same as Cheqqured Tiles
flooring 102.00
17 Flooring
a) Vitrified flooring
Block-A
Dialysis 2 18.575 14.430 536.07
Change Room 1 2.985 2.400 7.16
Duty Nurse Room 2 3.320 6.115 40.60
Dialyzer Storage 2 3.145 6.115 38.46
Chemical Mixing 1 3.260 6.115 19.93
Reception 1 4.680 3.115 14.58
Arogya Sree 1 4.680 3.000 14.04
RO Plant 1 9.000 6.115 55.04
RO Plant 1 4.450 2.365 10.52
AHU 2 4.085 3.000 24.51
Class IV 1 3.995 3.115 12.44
Electrical 1 3.995 3.115 12.44
Store/pantry 1 2.695 3.045 8.21
3.0 m wide corridor 1 30.905 3.000 92.72
infront of Reception 3.0 m wide
corridor 1 26.110 2.480 64.75
infront of Staircase 1 4.300 3.780 16.25
3.0 m wide corridor near AHU 1 27.200 3.000 81.60
Near Dumb 1 3.640 1.730 6.30
infront of Staircase 1 6.270 2.400 15.05
infront of PHC 2 6.270 2.400 30.10
infront of PHC 2 2.930 0.940 5.51
infront of Utility 2 1.315 1.130 2.97
Ramp Block
Laboratory & Security 2 3.000 3.000 18.00
Attendents Waiting 2 4.315 6.045 52.17
House Keeping & Admin 2 3.000 4.915 29.49
Lobby 2 1.085 1.315 2.85
Infront Lift 2 2.400 3.000 14.40
Corridor 1 23.390 3.000 70.17
Corridor Lobby 1 10.360 3.230 33.46
Block-B
Service Corridor 2 8.050 1.200 19.32
Store 2 2.635 3.045 16.05
Electrical Room 2 3.995 3.115 24.89
Lobby 2 2.540 1.130 5.74
Lobby 2 1.230 3.230 7.95
ii Risers
Staircase-1&2 4 28 2.000 0.150 33.60
Staircase-3 1 28 2.400 0.150 10.08
43.68
Say 44.00 Sqm
24 Wall putty
Same as internal plastering 5852.00
5852.00
Say 5852.00 Sqm
27
Texture Paint for Exterrnal Walls
Same as of external plastering @
40% 576.40
576.40
Say 577.00 Sqm
28 Doors
D2 2 1.500 2.600 7.80
7.80
Say 7.80 Sqm
ALD
ALD1 20 2.000 2.600 104.00
104.00
Say 104.00 Sqm
30 Windows withmesh
W2 62 1.500 1.800 167.40
31 Ventilators
V5 74 0.600 0.500 22.20
22.20
Say 22.20 Sqm
32 Jali wall
Jali wall 24 1.800 1.800 77.76
77.76
Say 78.00 Sqm
35 Railing
Staircase
All round the staircase 2 1 7.350 0.900 13.23
All round the staircase 2 1 7.350 0.900 13.23
All round the staircase 1 1 7.350 0.900 6.62
All round the ramp 1 1 36.000 0.900 32.40
65.48
Say 66.00 Sqm
36 Strucural Glazing
SG 4 1.800 2.100 15.12
15.12
Say 16.00 Sqm
38 cupboards
Reception 1 1 2.500 2.100 5.25
Dialyzer Store 1 1 2.500 2.100 5.25
Store 1 1 2.000 2.100 4.20
Pay Rooms 1 9 2.000 2.100 37.80
52.50
Say 53.00 Sqm
36 Grip bar
37 RCM Drop
Duct 2 1 6.000 0.450 5.40
5.40
Say 6.00 Sqm
38 False ceiling
Qty Same as Vitrified flooring 2351.35
2351.35
Say 2352.00 Sqm
52 Aluminium sheet
Roof beams
Horizontal 2 3.460 6.92
6.92
Say 7.00 Rmt
3 Roof slab
i) Roof Slab 125mm thick
Ramp Block (as per CAD) 1 432.775 432.78
Ded Of Staircase -1 5.100 5.700 -29.07
Ded Of Lift -2 2.400 3.000 -14.40
Deduction of Ramp -1 5.100 21.000 -107.10
282.21
Say 283.00 Sqm
10 Sunshades
W1 35 2.100 73.50
W2 4 1.800 7.20
W3 14 1.500 21.00
101.70
Say 102.00 Rmt
11 TMT STEEL
Columns upto 3.60 mts levael 250.97 200.000 Kgs/Cum 50193.22
Roof beams 160.69 200.000 Kgs/Cum 32137.52
125mm thick Roof slab 283.00 10.000 Kgs/Sqm 2830.00
150mm thick Roof slab 1647.00 12.000 Kgs/Sqm 19764.00
175mm thick Roof slab 943.51 14.000 Kgs/Sqm 13209.13
175mm thick waist slab 225.90 14.000 Kgs/Sqm 3162.60
12 Mild Steel
Sunshades 101.70 4.000 Kgs/RM 406.80
Sillslab 1.170 4.000 Kgs/Sqm 4.68
Platforms & Lofts 29.000 4.000 Kgs/Sqm 116.00
Shelves 71.000 4.000 Kgs/Sqm 284.00
RBM 1725.3 0.500 Kgs/Sqm 862.66
1674.14
Say 1.67 MT
13 External plastering
All round the Building 1 415.736 4.200 1746.09
Duuct at A4 1 32.000 4.200 134.40
Duuct at A4 1 24.230 4.200 101.77
Duuct at B3 1 49.150 4.200 206.43
Ramp offset walls 2 18.000 4.200 151.20
Deductions
W1 -32 1.800 1.800 -103.68
W2 -14 1.500 1.800 -37.80
W3 -10 1.200 1.800 -21.60
V5 -58 0.600 0.500 -17.40
2159.41
Say 2160.00 Sqm
14 Ceiling plastering
Qty Same as Vitrified flooring 2403.00
Qty Same as Ceramic flooring 100.00
Qty Same as Chqqured tiles flooring 104.00
Qty Same as Granite Slabs flooring 43.00
Deduct
Pre operative Ward -1 8.920 8.590 -76.62
Post Operative Ward -1 14.430 8.590 -123.95
ICU -1 11.200 12.800 -143.36
Pay Rooms -1 11.200 12.800 -143.36
2162.70
Say 2163.00 Sqm
16 Flooring
a) Vitrified flooring
BLOCK - A4
Store Room 1 4.240 4.240 17.98
Doctor Room 1 4.240 4.240 17.98
Anesthetia Room 1 4.240 4.240 17.98
Pre operative Ward 1 8.915 8.595 76.62
Deduction of toilet -1 2.510 1.800 -4.52
Change Room 4 2.400 2.065 19.82
Duty nurse 1 4.835 3.000 14.51
Deduction of toilet -1 1.200 1.500 -1.80
Officer Incharge 1 4.565 3.000 13.70
Deduction of toilet -1 1.200 1.500 -1.80
O.T.Records Room 1 3.435 2.735 9.39
O.T.Reception 1 5.965 5.595 33.37
A.H.U 1 6.885 9.390 64.65
Theatre Pack Preparation 1 4.800 6.115 29.35
ii Risers
Staircase 5 28 2.000 0.150 42.00
42.00
Say 42.00 Sqm
b) Epoxy coving
BLOCK - A4
Operation Theatre 3 26.000 78.00
Sterilization 1 18.230 18.23
96.23
Say 97.00 RM
23 Wall putty
Same as internal plastering 6989.00
Pre operative Ward 1 8.920 8.590 76.62
Post Operative Ward 1 14.430 8.590 123.95
ICU 1 11.200 12.800 143.36
Pay Rooms 1 11.200 12.800 143.36
7476.30
Say 7477.00 Sqm
25
Emulsion paint for external plastering
Same external plastering @ 60% 1296.00
27 Cinder Filling
Toilet Blocks 4 7.085 4.730 0.300 40.21
40.21
Say 41.00 cum
30 Ventilators
V5 58 0.600 0.500 17.40
17.40
Say 17.40 Sqm
1 RCM Drop
Duct 2 1 6.000 0.450 5.40
5.40
Say 6.00 Sqm
33 Painting to iron Work
Quantity Same as MS Grill 172.00
Say 172.00 Sqm
34 Railing
Staircase
Staircase 5 7.000 0.900 31.50
Duct 2 1 6.000 0.900 10.80
42.30
Say 43.00 Sqm
b cupboards
Change Room 1 4 2.400 2.100 20.16
OT records Room 1 1 3.780 2.100 7.94
OT pharmacy Store 1 2 4.800 2.100 20.16
Store 1 2 2.890 2.100 12.14
Class IV Room 1 2 4.070 2.100 17.09
Dirty Utility 1 2 2.890 2.100 12.14
89.63
Say 90.00 Sqm
35 Grip bar
36 False ceiling
Pre operative Ward 1 8.920 8.590 76.62
Post Operative Ward 1 14.430 8.590 123.95
ICU 1 11.200 12.800 143.36
Pay Rooms 1 11.200 12.800 143.36
487.30
Say 488.00 Sqm
37 Structural glazing
Pre Operative Ward 1 2.400 3.000 7.20
Change Room 1 2.400 3.000 7.20
Post OP I.C.U WARD 2 2.400 3.000 14.40
2 5.020 3.000 30.12
Staircase 2 1.800 3.000 10.80
69.72
Say 70.00 SQM
39 Mastic pad
Roof beams
Horizontal 2 3.460 0.450 3.11
3.11
Say 4.00 Sqm
41 Aluminium sheet
Roof beams
Horizontal 2 3.460 6.92
6.92
Say 7.00 Rmt
2 Roof Beams
Horizontal
Block-A
T1-T4 1 7.120 0.300 0.300 0.64
Deduction of Columns -2 0.750 0.300 0.300 -0.14
T4-T5 1 2.400 0.380 0.275 0.25
T5-T7 1 2.800 0.300 0.300 0.25
T7-T10 2 7.700 0.230 0.450 1.59
T10-T16 2 13.810 0.300 0.300 2.49
Deduction of Columns -8 0.750 0.300 0.300 -0.54
Secondary Beam 2 9.520 0.300 0.300 1.71
Deduction of Columns -2 0.230 0.300 0.300 -0.04
Q1-Q2 1 3.310 0.300 0.300 0.30
Q2-Q4 1 2.310 0.380 0.300 0.26
Q4-Q5 1 2.400 0.380 0.275 0.25
Q5-Q10 1 11.250 0.230 0.450 1.16
Q10-Q12 1 2.800 0.300 0.300 0.25
Q12-Q13 1 2.400 0.380 0.275 0.25
Q13-Q16 1 7.120 0.300 0.300 0.64
O1-O5 4 9.520 0.450 0.575 9.85
O5-O12 2 16.290 0.300 0.275 2.69
3 Roof slab
i) Roof Slab 125mm thick
Ramp Block 1 432.775 432.78
Ded Of Staircase -1 5.100 5.700 -29.07
Ded Of Lift -2 2.400 3.000 -14.40
Deduction of Ramp -1 5.100 21.000 -107.10
282.21
Say 283.00 Sqm
d sill slabs
W1 75 2.260 0.230 0.050 8.48
W2 26 1.960 0.230 0.050 2.55
11.02
Say 12.00 cum
9 Lintels
D2 3 1.960 0.225 0.175 0.23
D3 5 1.660 0.225 0.175 0.33
D5 12 1.360 0.225 0.175 0.64
ALD1 1 2.460 0.225 0.175 0.10
FD1 2 2.460 0.225 0.175 0.19
FD2 2 1.960 0.225 0.175 0.15
W1 75 2.260 0.225 0.175 6.67
W2 26 1.960 0.225 0.175 2.01
V5 60 1.060 0.225 0.175 2.50
JW 60 2.260 0.225 0.175 5.34
Lift 2 1.460 0.225 0.175 0.11
D2 13 1.500 0.115 0.175 0.39
D3 5 1.200 0.115 0.175 0.12
D5 12 0.900 0.115 0.175 0.22
D6 36 0.800 0.115 0.175 0.58
ALD1 6 2.000 0.115 0.175 0.24
FD1 8 2.000 0.115 0.175 0.32
20.16
Say 21.00 Cum
10 Sunshades
W1 75 2.260 169.50
W2 26 1.960 50.96
220.46
Say 221.00 Rmt
11 Sill slabs
W1 75 2.260 0.230 0.050 1.95
W2 26 1.960 0.230 0.050 0.59
V5 60 1.060 0.230 0.050 0.73
3.27
Say 3.30 cum
13 Mild Steel
Sunshades 220.46 4.000 Kgs/RM 881.84
Platforms & Lofts 280.560 4.000 Kgs/Sqm 1122.24
Shelves 108.000 4.000 Kgs/Sqm 432.00
Sillslab 3.267 4.000 Kgs/Sqm 13.07
RBM 1160.5 0.500 Kgs/Sqm 580.23
3029.37
Say 3.03 MT
14 External plastering
All round the Building 1 415.736 3.600 1496.65
Duct at A4 1 49.150 3.600 176.94
Duct at B3 1 49.150 3.600 176.94
Ramp offset walls 2 18.000 3.600 129.60
Deductions
W1 75 1.800 1.800 243.00
W2 26 1.500 1.800 70.20
V5 60 0.600 0.500 18.00
2311.33
Say 2312.00 Sqm
15 Ceiling plastering
Qty Same as Waist slab 226.00
Qty Same as Ceramic flooring 129.13
16
Internal plastering 12 mm thick
BLOCK - A4
Seminar Hal 1 30.330 3.475 105.40
Lecture Hall 1 50.050 3.475 173.92
Stores 1 13.270 3.475 46.11
Pantry 1 13.270 3.475 46.11
Meeting Hall 1 26.000 3.475 90.35
PA Room 1 11.940 3.475 41.49
Ante Room 1 18.370 3.475 63.84
Superintendent Chamber 1 26.000 3.475 90.35
Cabins1-6 6 10.690 3.475 222.89
RMO Room 1 15.600 3.475 54.21
Pantry 1 15.600 3.475 54.21
Head Nurse Room 1 15.600 3.475 54.21
AHU Room 2 14.170 3.475 98.48
17 Flooring
a) Vitrified flooring
BLOCK - A4
Seminar Hal 1 6.570 8.595 56.47
Lecture Hall 1 16.430 8.595 141.22
Stores 1 3.145 3.490 10.98
Pantry 1 3.145 3.490 10.98
Meeting Hall 1 6.885 6.115 42.10
PA Room 1 3.470 2.500 8.68
Ante Room 1 3.300 5.885 19.42
Superintendent Chamber 1 6.885 6.115 42.10
Cabins1-6 6 2.345 3.000 42.21
RMO Room 1 4.800 3.000 14.40
Pantry 1 4.800 3.000 14.40
Head Nurse Room 1 4.800 3.000 14.40
AHU Room 2 4.085 3.000 24.51
Electrical Room 1 3.995 3.115 12.44
Store Rooms 2 2.635 3.045 16.05
Before Staircase 1 2.400 6.390 15.34
Class IV Room 1 3.995 3.115 12.44
ii Risers
Staircase 5 24 2.000 0.150 36.00
36.00
24 Wall putty
Same as internal plastering 4894.00
Qty Same as Vitrified flooring 2462.55
7356.55
Say 7357.00 Sqm
28 Doors
D2 15 1.500 2.600 58.50
58.50
Say 58.50 Sqm
30 Ventilators
V5 61 0.600 0.500 18.30
18.30
Say 18.30 Sqm
31
MS Grill for Windows @ 15 Kg/Sqm
W1 75 1.800 1.800 243.00
W2 35 1.500 1.800 94.50
V5 61 0.600 0.500 18.30
355.80 Sqm
Say 356.00 Sqm
5340.00 Kgs
32 RCC Jally Windows
JW 22 1.800 1.800 71.28
71.28
Say 72.00 Sqm
34 Railing
Staircase
Staircase 5 2 3.500 0.900 31.50
Duct 2 1 6.000 0.900 10.80
42.30
Say 43.00 Sqm
35 RCM Drop
Duct 2 1 6.000 0.450 5.40
5.40
Say 6.00 Sqm
b cupboards
Pay Room 1 18 1.200 2.100 45.36
Dirty Utility 1 2 2.890 2.100 12.14
57.50
Say 58.00 Sqm
35 Grip bar
Staircase 5 14.830 74.15
Ramp 1 47.100 47.10
121.25
Say 122.00 Rmt
36 False ceiling
Qty Same as Vitrified flooring 2462.55
2462.55
Say 2463.00 Sqm
37 Structural glazing
4 2.400 3.600 34.56
2 5.020 3.600 36.14
Staircase 2 1.800 3.000 10.80
40 Cinder Filling
Toilet Blocks 6 7.085 4.730 0.300 60.32
60.32
Say 61.00 cum
42 Mastic pad
Roof beams
Horizontal 2 3.460 0.450 3.11
3.11
Say 4.00 Sqm
44 Aluminium sheet
Roof beams
Horizontal 2 3.460 6.92
6.92
Say 7.00 Rmt
2 Roof Beams
Staircase Head Room
Staircase(h) 5 2 4.690 0.230 0.380 4.10
Deduction of Columns 5 -4 0.300 0.230 0.380 -0.52
Staircase(v) 5 2 5.346 0.230 0.380 4.67
Deduction of Columns 5 -4 0.450 0.230 0.380 -0.79
Water Tank Bottom
Water Tank Bottom 4 2 7.350 0.230 0.425 5.75
Deduction of Columns 4 -6 0.600 0.230 0.425 -1.41
Water Tank Bottom 4 2 6.620 0.230 0.425 5.18
Deduction of Columns 4 -2 0.300 0.230 0.425 -0.23
16.74
Say 17.00 Cum
3 Roof slab
i) Roof Slab 125mm thick
Staircase Head Room
Staircase Head Room 5 7.700 4.690 180.57
180.57
Say 181.00 Sqm
5 Sunshades
W2 5 1.800 9.00
9.00
Say 9.00 Rmt
9 Dummy columns
Block-A & Ramp Block
C1 13 0.380 0.600 0.900 2.67
C2 14 0.380 0.600 0.900 2.87
C3 4 0.380 0.600 0.900 0.82
C4 1 0.450 0.750 0.900 0.30
C8 2 0.600 0.600 0.900 0.65
C9 2 0.600 0.600 0.900 0.65
C10 2 0.600 0.600 0.900 0.65
C11 1 0.600 0.750 0.900 0.41
C12 11 0.600 0.750 0.900 4.46
C13 10 0.600 0.750 0.900 4.05
11 Mild Steel
RBM 458.0 0.500 Kgs/Sqm 229.00
229.00
Say 0.23 MT
12 External plastering
All round the Building 5 25.400 3.600 457.20
Parapet wall (All round)
All round the Building 1 410.581 1.915 786.26
All round the Open Courtyard 2 49.150 1.915 188.24
Deductions
W2 -5 1.500 1.800 -13.50
1418.21
Say 1419.00 Sqm
13 Ceiling plastering
Staircase 5 7.000 5.000 175.00
Water tank Bottom 4 6.975 6.745 188.19
363.19
Say 364.00 Sqm
21 Windows
W2 5 1.500 1.800 13.50
13.50 Sqm
b Haunch concrete
Sump 0.50 1 50.00 0.30 0.300 2.25
Pump Room area 0.50 1 32.00 0.30 0.300 1.44
Steps for staircase 0.50 23 1.00 0.30 0.165 0.57
4.259
SAY 4.300 CUM
c 500 mm Thick Side walls
Sump long walls 2 22.500 0.500 3.275 73.69
Sump short walls 3 10.00 0.500 3.275 49.13
122.813
SAY 123.000 CUM
11 External plastering
Pump room internal 1 36.000 2.925 105.30
Deductions
R/S -1 2.300 2.020 -4.65
D -1 1.000 2.020 -2.02
W -1 1.200 1.200 -1.44
97.19
SAY 98.000 Sqm
12 Basement plastering
Sump alround 1 67.000 0.600 40.20
40.20
SAY 41.000 Sqm
2 PCC (1:4:8)
Equalization & Oil & Grease 1 6.15 6.00 0.15 5.54
Three sides of Barscreen 1 2.70 1.35 0.15 0.55
Sludge Holding tank 1 1.85 4.70 0.15 1.30
Biological System 1 18.20 5.40 0.15 14.74
Extra For Treated water tank 1 2.00 7.80 0.15 2.34
Columns Under Excvataion 8 1.670 1.67 0.15 3.35
Anoxic Tank 1 4.500 4.10 0.15 2.77
30.58
SAY 31.00 CUM
466.60
SAY 467.00 CUM
5 Disposal of earth
Total earth work excavation 589.00
Refilling with availabe earth 466.60
122.40
SAY 122.00 CUM
202.80
SAY 203.00 SQM
8 PCC
a Steps for Dry Pump Room 1 12 0.600 0.15 0.300 0.32
Feed pumps 1.000 0.600 1.20 0.500 0.36
Sludge pumps 2.000 0.600 0.60 0.600 0.43
Filter Feed pumps 1.000 1.200 0.60 0.600 0.43
1.55
SAY 2.00 CUM
10 Roof beams
Treated water tank 2 5.90 0.30 0.450 1.59
Cantilever Beams 6 1.460 0.30 0.450 1.18
Pump room 3 8.460 0.30 0.450 3.43
Pump room 2 6.460 0.30 0.450 1.74
7.95
SAY 8.00 CUM
13 HYSD STEEL
Raft 91.23 80.000 Kgs/Cum 7298.25
Columns 2.51 120.00 Kgs/Cum 301.39
Side walls 45.02 120.00 0.350 Kgs/Cum 1890.74
Side walls 202.80 120.00 0.450 Kgs/Cum 10951.20
Roof beams 7.95 120.00 Kgs/Cum 953.53
Roof slab 91.77 80.000 0.150 Kgs/Cum 1101.24
Staircase 10.00 65.000 0.150 Kgs/Cum 97.50
22593.8
Say 22.60 MT
14 Impervious Coat
Pump room
1 8.460 6.46 54.65
54.65
Say 55.00 Sqm
16.11
Say 17.00 cum
17 Internal plastering
Allround Pump Room 1 28.000 3.000 84.00
Deductions
R/S -1 2.000 2.400 -4.80
79.20
Say 80.00 Sqm
18 External plastering
Allround Pump Room 1 29.840 3.125 93.25
89.00
Say 89.00 Sqm
22 100mm dia MS Sleeves @
12.10Kg/RM
4 0.600 2.40
2.40
Say 3.00 RM
or 29.04
Say 30.00 Kgs
0.0300 MT
Say 0.10 MT
23 Impervious coat
Horizontals ( Bar Screen ) 1 2.70 2.250 6.075
Bar screen 2 1.00 2.250 4.500
Buffle Wall 1 0.90 1.500 1.350
Bar screen 1 1.00 0.750 0.750
Oil & Grease 2 0.90 1.350 2.430
Sludge Holding 2 1.50 3.125 9.375
Sludge Holding 1 4.70 3.125 14.688
Bar screen Long Wall 1 2.60 2.25 5.850
Bottom
307.318
614.635
2.67
SAY 3.00 CUM
25 SS Railing
1.00 mt RCC Platform along MBBR- 1 24.250 1.000 24.250
1 to Filter Feed Tank
Staircase 1 3.900 1.500 5.850
Midlanding 2 1.500 1.000 3.000
33.10 Sqm
Say 33.00 Sqm
a) Roof Beams :
un supported height up to 3.66 m
Fifth Floor : 27.00 ONE CUM #REF! #REF!
b) ROOF SLABS :
i) Sloped Roof Slabs 100mm thick :
Fifth Floor : 550.00 ONE SQM #REF! #REF!
RBR-STCL-2- II A
Unit = 1 sqm
Taking output = 1 hectare
In area of non-thorny jungle (light jungle)
a) Labour
LAB-00120, Mate - Day
Mazdoor (Unskilled)
LAB-00121 CSoR-III - 3, 4 4.160 Day
Add for MAA @ 25% 0.25
b) Machinery
Dozer D 50 with attachment or suitable
machinery for removal of trees & stumps 10.00 hour
Tractor with trolley 3 T HIR-00077 1.00 hour
RBR-STCL-3
Unit: Each
a) Girth above 300 mm to 600 mm
a) labour
LAB-00120, Mate - day
Mazdoor (Unskilled) 0.624 day
LAB-00121 CSoR-III - 3, 4
Add for MAA @ 25% 0.25
b) Machinery
Tractor with trolley 3 T HIR-00077 0.070 hour
(RBR-EECD-5 ii)
Unit = cum
Taking output : 180.00 cum
LAB-00120, a) Mazdoor
Mazdoor (Unskilled) 2.08 Nos.
LAB-00121 CSoR-III - 3, 4
Add for MAA @ 25% 0.25
b) Machinery
Dozer D-50 @ 50 cum per hour (cutting with
HIR-00072 pushing) 3.60 hours
(RBR-EECD-8 - I c i
Unit = cum
Taking output : 180.00 cum
LAB-00120, a) Mazdoor
Mazdoor (Unskilled) 2.08 Nos.
LAB-00121 CSoR-III - 3, 4
Add for MAA @ 25% 0.25
b) Machinery
Hydraulic Excavator 0.9 cum bucket capacity
HIR-00052 @ 60 cum per hour 3.00 hours
(RBR-EECD-8 - c ii
Unit = cum
Taking output : 108.00 cum
LAB-00120, a) Mazdoor
Mazdoor (Unskilled) 3.12 Nos.
LAB-00121 CSoR-III - 3, 4
Add for MAA @ 25% 0.25
b) Machinery
HIR-00072 Dozer D-50 @ 50% of 100 cum per hour 2.16 hours
RBR-EECD-9 i
Unit = cum
Taking output = 180 cum 180.00 cum
a) Labour
LAB-00120, Mate - day
Mazdoor (Unskilled)
LAB-00121 CSoR-III - 3, 4 3.220 day
LAB-00003 CSoR-I - 3 Driller 2.00 day
Blaster 0.25 day
Add for MAA @ 25% 0.25
b) Machinery
HIR-00072 Dozer D-50 @ 30 cum per hour 6.00 hour
HIR-00003& LAB-00319 Air compressor, 210 cfm 6.00 hour
HIR-00003& LAB-00319 Crew charges 6.00 hour
HIR-00039 Jack hammers 12.00 hour
HIR-00039 Crew charges 12.00 hour
Add for MAA @ 25% 0.25
Front end loader 1 cum bucket capacity @ 30
HIR-00074 cum / hour 6.00 hour
HIR-00052 Tipper 5.5 cum capacity, 2 trips per hour 16.00 hour
c) Materials
MAT-00264 M - 104 Gelatine 80 per cent 70.00 kg
Electric Detonators @ 1 detonator for 2
MAT-00021 gelatine sticks of 285 gm each 252.00 each
RBR-EECD-9 ii B
Unit = cum
Taking output = 36 cum 36.00 cum
a) Labour
LAB-00120, Mate - day
Mazdoor (Unskilled)
LAB-00121 CSoR-III - 3, 4 10.400 day
Add for MAA @ 25% 0.25
b) Machinery
Hydraulic excavator 0.9 cum with rock breaker
HIR-00052 attachment @ 6 cum per hour 6.00 hour
HIR-00052 Tipper 5.5 cum capacity, 1 trip per hour 6.50 hour
8 Excavation for roadway in hard rock with controlled blasting by drilling, blas
trimming of bottom and side slopes in accordance with requirements of lines, g
sections, loading and disposal of cut rock with all lifts and leads upto 1000 m
Specification Clause 302.3.5 MORD / 301 MORTH including overhead charges &
complete for finished item of work.
RBR-EECD-9 iii
Unit = cum
Taking output = 180 cum 180.00 cum
a) Labour
LAB-00120, Mate - day
Mazdoor (Unskilled)
LAB-00121 CSoR-III - 3, 4 3.220 day
LAB-00003 CSoR-I - 3 Driller 2.00 day
LAB-00003 CSoR-I - 3 Blaster 0.50 day
Add for MAA @ 25% 0.25
b) Machinery
HIR-00072 Dozer D-50 @ 30 cum per hour 6.00 hour
HIR-00003& LAB-00319 Air compressor, 210 cfm 6.00 hour
HIR-00003& LAB-00319 Crew charges 6.00 hour
HIR-00039 Jack hammers 12.00 hour
HIR-00039 Crew charges 12.00 hour
Add for MAA @ 25% 0.25
HIR-00074 Front end loader 1 cum bucket capacity 6.00 hour
HIR-00052 Tipper 5.5 cum capacity, 4 trips per hour 8.20 hour
Site Developement-DATA 569 of 1048
9 Providing and constructing dry rubble rock-toe with rubble and stone chips
(Spoil Bank) including cost of all materials, machinery, labour, hand packing rubble
finishing top and sides to required slopes etc., complete with initial lead upto 1
including overhead charges & Contractor profit, complete for finished item of work.
Useful rubble and stone chips will be issued at dump yard at the issue rate for use
chips. Sorting out and breaking charges included in rate analysis.
IRR-DAW-5-9
Unit: 100 cum 100 cum
A.MATERIALS
Useful rubble ( at dump yard ) MAT-00079 100.00 cum
Useful stone chips ( at dump yard )
MAT-00067 15.00 cum
B.MACHINARY
HIR-00052& LAB-00362 Shovel 0.85 cum 2.00 hour
HIR-00186 Crew charges 2.00 hour
Add for MAA @ 25% 0.25
HIR-00052 Tipper 5 cum 6.00 hour
C.LABOUR
LAB-00091 CSoR-II - 35 Mason Class-II 7.00 day
work inspector LAB-00010 1.00 day
LAB-00091
LAB-00120, CSoR-II - 35 Stone breaker 2.00 day
IRR-DAW-6-8
Unit: 100 Sqm 100 Sqm
A.MATERIALS
Sand (Un-Screened ) 15.30 cum
Coarse aggregate 10 mm down 15.30 cum
Coarse aggregate 40-20 mm 15.30 cum
Stone chips 9.00 cum
Rough stones ( rubble ) 30 to 45 cm long 57.60 cum
Through stones 65 to 75 cm long
MAT-00078 44 Nos
B.LABOUR
work inspector LAB-00010 1.00 day
LAB-00091
LAB-00120, CSoR-II - 35 Mason Class-II 10.00 day
RBR-EECD-4 -iii
Unit = cum
Taking output = 100 cum 100.00 Cum
a) Labour
LAB-00120, Mate - day
Mazdoor (Unskilled)
LAB-00121 CSoR-III - 3, 4 0.260 day
b) Machinery
Hydraulic Excavator 0.9 cum bucket capacity
@ 60 cum per hour (Page No.27 of R&B SOR)
hr
Motor grader for grading @ 200 cum per hour
(Page No.27 of R&B SoR) 1.00 hour
Water tanker 6 kl capacity (Page No.27 of R&B
SoR) 4.00 hour
Vibratory Roller 80 - 100 kN (Page No.27 of
R&B SoR) 1.00 hour
C) Water 24.000 Kl
Total
e) Overheads & Contractors Profit 0.13615
Cost for 100 cum = a+b+c+d+e
Site Developement-DATA 571 of 1048
es, including cutting of trunks, branches and removal of stumps & roots,
tion of back filling and stacking of serviceable material by manual means with all lifts
o 100m as per Technical Specification Clause 201MORD / MORTH including
es & Contractor profit, complete for finished item of work.
roadway in soil by mechanical means including cutting and pushing the earth
nkment upto a distance of 100 m, including trimming bottom and side slopes in
h requirements of lines, grades and cross-sections as per Technical Specification
ORD / 301 MORTH including overhead charges & Contractor profit, complete for
work.
1 No.
525.00 1092.00
1092.00 273.00
1 No.
525.00 1092.00
1092.00 273.00
1 No.
525.00 1638.00
1638.00 409.50
1 No.
525.00 1690.50
690.00 1 No. 1380.00
690.00 1 No. 172.50
3243.00 810.75
60.00 1 kg 4200.00
1 No.
525.00 5460.00
5460.00 1365.00
roadway in hard rock with controlled blasting by drilling, blasting and breaking,
om and side slopes in accordance with requirements of lines, grades and cross-
g and disposal of cut rock with all lifts and leads upto 1000 m as per Technical
ause 302.3.5 MORD / 301 MORTH including overhead charges & Contractor profit,
shed item of work.
1 No.
525.00 1690.50
690.00 1 No. 1380.00
690.00 1 No. 345.00
3415.50 853.88
60.00 1 kg 4200.00
constructing dry rubble rock-toe with rubble and stone chips from dump yard
uding cost of all materials, machinery, labour, hand packing rubble and stone chips,
d sides to required slopes etc., complete with initial lead upto 1 km and all lifts
ead charges & Contractor profit, complete for finished item of work.
nd stone chips will be issued at dump yard at the issue rate for usefull rubble / stone
ut and breaking charges included in rate analysis.
ilable excavated earth including pre-watering of soil, removal of top soil, spreading
clods, sectioning and consolidation with Vibratory Road Roller @ OMC to meet
table 300-2 of MoRT&H, including all hire and operational charges of T&P
shed item of work as per MoRT&H specification 305 (4th revision) including cost and
all materials , labour charges , overheads and contractors profit etc., complete for
work (Payment will be made based on level for finished item of work).
3483.70 1 hr 0.00
3192.00 1 hr 3192.00
806.00 1 hr 3224.00
3479.20 1 hr 3479.20
110.00 1 Kl 2640.00
12671.70
12671.70 1725.25
14396.95
Site Developement-DATA 579 of 1048
Detailed Estimate for Proposed Main Road in front of Medical College Campus at Vizianagaram
S.NO DESCRIPTION NOS L B D QUANTITY
1 Road Length
Road lenth 1 940.00 940.00
940.00
Say 940.00 Rm
2 EARTH WORK EXCAVATION
for Existing Road 1 450.00 7.00 0.500 1575.00
1575.00
Say 1575.00 CUM
3 150mm thick GSB
for Extension Road 1 940.00 7.0 0.150 987.00
987.00
Say 987.00 Cum
4 WMM
for Existing Road 1 940.00 7.00 0.150 987.00
987.00
Say 987.00 CUM
1 Earth work excavation for foundations (Mechanical 1575.00 CUM 126.00 198450
Means) for buildings in ordinary soils and depositing on
bank for all lifts and with an initial lead of 10m and up
to 3m depth including all operational,incidental, labour
charges such as shoring, sheeting, planking, strutting
etc., and overheads & contractors profit complete for
finished item of work excluding dewatering charges etc.,
as per SS 20 B(APSS 308)
4 Providing and applying primer coat with Bitumen 6580.00 SQM 33.00 217140
Emulsion (Slow Setting-1) on the prepared surface of
granular base including clearing of road surface and
sparaying primer at the rate of 0.70kg/sqm using
mechanical means for finished item of work as per
MoRT&H Specification 502 (5th revision) and as
directed by the Engineer-in-Charge.
5 Providing and applying tack coat with bitumen VG- 6580.00 SQM 15.00 98700
10 bitumen using pressure distributor at the rate of
0.2Kgs per sqm on the prepared bituminous/granular
surface cleaned with mechanical broom for finished
item of work as per MoRT&H Specification 503 (5th
revision) and as directed by the Engineer-in-Charge.
6 Providing and laying of 50mm thick Bituminous 329.00 CUM 8831.00 2905399
Macadam with hot mix plant producing an average
output of 37.5 tonnes per hour using hard blasted
granite crushed aggregates of Grading - II as per table
500-4 of MoRT&H specificaion 504 (5th revision)
premixed with bituminous binder of 60/70 grade @
3.3% by weight of total mixture, transported to site, laid
over a previously prepared surface with mechanical
paver finisher to the required grade, level and alignment
and rolled as per Clauses 501.6 and 501.7 to achieve
the desired compaction for finished item of work as
directed by the Engineer-in-Charge including hire and
opeational charges all T&P and all other contingent
charges necessary including cost of charges on all
materials etc., complete and as per MoRTH
specification No. 504(5th revision)
7 Providing and applying tack coat with bitumen VG- 6580.00 SQM 15.00 98700
10 bitumen using pressure distributor at the rate of
0.2Kgs per sqm on the prepared bituminous/granular
surface cleaned with mechanical broom for finished
item of work as per MoRT&H Specification 503 (5th
revision) and as directed by the Engineer-in-Charge.
8 Providing and Laying 30mm thick Bituminous 27.00 CUM 6335.00 171045
concrete with 40-60 TPH HMP /100 to 120 TPH batch
type hot mix plant using HBG crushed aggregates of
Grading-2 as per table 500-17 of Specification 507 of
MoRT&H (5th revesion), premixed with Bituminious
binder VG-30 Grade @ 5.4% of mix and filler,
transporting the hot mix to work site, laying with paver
finisher to the required grade, level and alignment,
rolling with smooth wheeled,vibratory and tandem
rollers to achieve the desired compaction as per
MoRT&H Specification 507 (5th Revision) complete for
finished item of work in all respects excluding
seiniorage charges and as directed by Engineer-in-
charge
9 Filling with available excavated earth including pre- 4116.00 CUM 144.00 592704
watering of soil, removal of top soil, spreading
soils, breaking clods, sectioning and consolidation
with Vibratory Road Roller @ OMC to meet
requirement of table 300-2 of MoRT&H, including
all hire and operational charges of T&P complete
for finished item of work as per MoRT&H
specification 305 (4th revision) including cost and
conveyance of all materials , labour charges ,
overheads and contractors profit etc., complete for
finished item of work (Payment will be made based
on level for finished item of work).
7814611.00
Conveyance, , loading and unloading charges SoR 2022-23
( No loading and unloading charges allowed for machinery loading and unloading )
(Lead) charges
for trucks and (Lead) charges for (Lead)
(Lead) charges for (Lead) charges for (Lead)
tippers for trucks and tippers charges for
trucks and tippers trucks and tippers for per cu.meter for charges for
for Earth / Sand Rubble/Size stones/ Cement/ Steel/ trucks and
PCC slabs/ trucks and
Sl No. Distance tippers per
/Gravel / Murrum/ Cut Stones/ Coarse RCC poles/ AC tippers for
Shahabad slabs/ cu.meter for
Lime/ Surki/ per aggregate per & GI sheets/ Bricks
CC & Laterite water/ 1000
/1000 nos
cu.meter cu.meter Packed litres
blocks/ Wood/ cum
materials/tonne
1 2 3 4 5 6 7 8
1 Lead up to 1 km 1 36.00 34.70 21.70 51.00 21.90 57.80
2 Lead up to 2 km 2 50.40 48.50 30.30 71.40 30.70 80.90
3 Lead up to 3 km 3 67.20 64.70 40.40 95.20 40.90 107.80
4 Lead up to 4 km 4 81.60 78.60 49.10 115.60 49.70 131.00
5 Lead up to 5 km 5 96.00 92.40 57.80 135.90 58.40 154.10
6 for Every km beyond 5 km up to 30 km 30 14.40 13.90 8.70 20.40 8.80 23.10
7 for Every km beyond 30 km 10000 12.00 11.60 7.20 17.00 7.30 19.30
October, 2022
2 Fe - 500 / Fe - 500 D 64000.00
5 MS Flats 62000.00
D Allowances
1 Add for MAA @ 20% 0.20
2 Overheads&Contractors Profit @13.615% 0.13615
Water charges
Type of Habitation 2 1 for Rural
2 for Urban
NAME OF THE WORK :- CONSTRUCTION OF PROPOSED DEGREE COLLEGE AT VEMPALLI
LEAD CHART (COMMON SoR 2022-2023) (Cement - June, 2022 & Steel - October, 2022 rates)
Initial
Reference
S.No./ Cost Convey- MA
Sl. Source of to SSR Lead in Looading Unloading
Description Item Unit excluding ance Total
No. Materials page KM charges charges
Code No. seigniorage Charges
number
charges 20%
(1) (2) (3) (4) (5) (6) (7) (8) (9) (10) (11) (12) (13)
Ordinary Portland Cement 43 / 53
1 1 MT 4220.00 4220.00
grade
2 Reinforcement steel Fe - 500 / 500 D 1 MT 64000.00 64000.00
3 Mild steel bars 1 MT 63000.00 63000.00
4 Structural steel 1 MT 62000.00 62000.00
5 MS flats 1 MT 62000.00 62000.00
6 Sand (un-screened) Pulivendula 12 27(a) 1 Cum 30.00 605.00 456.00 1061.00
7 Sand (unscreened) for filling Pulivendula 12 27(b) 1 Cum 30.00 460.00 456.00 916.00
8 Sand (screened for mortar, plastering Pulivendula 12 28 1 Cum 30.00 700.00 456.00 1156.00
items)
9 Common burnt clay bricks (23x11x7cm) Local 11 BMT-A.01 1000 Nos 8.00 7500.00 223.40 68.50 68.50 13.70 7874.10
12 Aggregates 40mm nominal size (HBG) konampeta 28 M - 055 1 Cum 26.00 965.00 384.30 1349.30
13 Aggregates 25mm nominal size (HBG) konampeta 28 M - 054 1 Cum 26.00 1501.00 384.30 1885.30
14 Aggregates 20mm nominal size (HBG) konampeta 28 M - 053 1 Cum 26.00 1565.00 384.30 1949.30
Aggregates 13.20 / 12.50mm nominal
15 konampeta 27 M - 052 1 Cum 26.00 1260.00 384.30 1644.30
size (HBG)
16 Aggregates 10mm nominal size (HBG) konampeta 27 M - 051 1 Cum 26.00 1070.00 384.30 1454.30
17 Aggregates 6mm nominal size (HBG) konampeta 27 M - 050 1 Cum 26.00 865.00 384.30 1249.30
(Part II)
18 Rough Stone (OTG) konampeta Roads & 1 1 Cum 26.00 171.45 384.30 555.75
Bridges
(Part II)
19 Rough Stone (HBG) konampeta Roads & 12 1 Cum 26.00 298.00 384.30 682.30
Bridges
20 Gravel / Quarry spall konampeta #REF! M - 008 1 Cum 27.00 149.00 412.80 561.80
Bitumen VG 30 Grade (60/70 Grade) Vizag IOCL 1 MT 60.00 56320.00 105.00 56425.00
Bitumen VG 10 Grade (80/100 Grade) Vizag IOCL 1 MT 60.00 55520.00 105.00 55625.00
Emulsion slow Setting (RS1) Vizag IOCL 1 MT 60.00 35000.00 105.00 35105.00
1) Certified that the leads mentioned in the lead statement are shortest and correct.
2) Certified that metal are to be obtained by blasting.
3) Certified that sufficient quantities & quanlity material are available in the quarries.
4) Certified that for non SSR items lowest market rates are adopted
5) Certified that ---% extra on labour towards Municipal/Agency area allowance is allowed .
Common SoR 2022-23 - Page : 590
29 Epoxy flooring light green or blue colour 3mm thick 19 MAT-08734 BMT-C.48 1862.00 1 Sqm
51 Mild Steel Tubes & pipes of all diameters 26 MAT-00871 BMT-F.04 76.00 1 Kg
Stainless Steel Tubes, sections, plates, sheets,
52 27 MAT-00872 BMT-F.06 414.00 1 Kg
pipes of all sizes
Stainless steel fly proof wire mesh of not less than
53 27 MAT-00885 BMT-F.19 564.00 1 Sqm
20 gauge
Rabbit wire mesh (chicken mesh) of not less than
54 26 MAT-00894 BMT-F.28 21.00 1 Sqm
30 gauge
55 Rolling Shutter (80x1.25mm) 25 MAT-00895 BMT-F.29 4025.00 1 Sqm
56 Collapsable steel shutters 25 MAT-00896 BMT-F.30 3508.00 1 Sqm
105 Water based Cement Primer of Interior Grade- 1 63 MAT-01073 BMT-J.01 160.00 1 Kg
106 Water based Cement Primer of Exterior Grade- 2 63 MAT-01074 BMT-J.02 200.00 1 Kg
107 Red oxide Primer Paint Grade-I 63 MAT-01075 BMT-J.03 145.00 1 Ltr
108 Zinc Chromate Yellow Oxide Iron Primer paint 63 MAT-01076 BMT-J.04 200.00 1 Ltr
109 Wood primer 63 MAT-01077 BMT-J.05 160.00 1 Ltr
110 Putty for wood work 63 MAT-01079 BMT-J.07 130.00 1 Kg
111 Spirit 64 MAT-01082 BMT-J.10 96.00 1 Ltr
112 Linseed Oil 64 MAT-01083 BMT-J.11 60.00 1 Ltr
113 Thinner for Melamine polish 64 MAT-01084 BMT-J.12 140.00 1 Ltr
114 French Polish 64 MAT-01086 BMT-J.14 200.00 1 Ltr.
115 Melamine Polish 65 MAT-01088 BMT-J.16 325.00 1 Ltr.
116 Interior grade Poly -Urethene polish 65 MAT-01089 BMT-J.17 750.00 1 Ltr.
117 Exterior grade Poly -Urethene polish 65 MAT-01090 BMT-J.18 843.00 1 Ltr.
118 Acrylic based Oil bound Washable Distemper 64 MAT-01093 BMT-J.21 81.00 1 Kg
119 Water proof Cement paint 64 MAT-01095 BMT-J.23 49.00 1 Kg
120 Acrylic interior emulsion paint 64 MAT-01097 BMT-J.24 190.00 1 Ltr
121 Acrylic exterior emulsion paint 64 MAT-01107 BMT-J.34 210.00 1 Ltr
131 Laminate sheets - Glossy finish: 1mm thick 72 MAT-01205 BMT-L.21 380.00 1 Sqm
132 Laminate sheets - Mat finish: 1mm thick 72 MAT-01208 BMT-L.24 400.00 1 Sqm
133 12.5mm Gypboard Tiles 595mm x 595mm 73 MAT-01236 BMT-M.01 275.00 1 Sqm
134 Gypsom board plain sheets 12.5mm thick 73 MAT-01238 BMT-M.03 221.00 1 Sqm
135 GI Ceiling Angle - 25mm x 10mm x 0.55mm 78 MAT-01239 BMT-M.04 78.00 1 RM
GI Ceiling section - 51.5mm x 26mm x 10.5mm x
136 78 MAT-01240 BMT-M.05 106.00 1 RM
0.55mm thick
Intermediate section - 45mm x 15mm x 15mm x
137 78 MAT-01241 BMT-M.06 78.00 1 RM
0.9mm
Perimeter channel - 20mm x 27mm x 30mm (web)
138 78 MAT-01242 BMT-M.07 69.00 1 RM
of 0.55mm thick
139 GI Angle - Precoated - 25mm x 25mm x0.7mm 78 MAT-01243 BMT-M.08 62.00 1 RM
GI pre coated - T section - 24mm x 38mm x 0.7mm
140 78 MAT-01245 BMT-M.10 60.00 1 RM
thick
Hotdipped GI Angle - Precoated - Grid -
141 78 MAT-01246 BMT-M.11 37.00 1 RM
19mmx19mm
Polyster painted GI - T section 24x32mm and MAT-01247 & MAT-
142 78 BMT-M.12 & 13 50.00 1 RM
24x25mm (sub-cross Tee) 01248
143 Polyster painted GI-T Section - 24mm x 27mm 78 MAT-01249 BMT-M.14 49.00 1 RM
144 Aluminium angle - 24mmx 24mm 78 MAT-01250 BMT-M.15 33.00 1 RM
Anodised Aluminium T section - 24mm x 24.5mm x
145 78 MAT-01251 BMT-M.16 32.00 1 RM
2.4mm
Common SoR 2022-23 - Page : 594
186 Pre painted steel/ powder coate Structural Glazing 149 MAT-01489 BMT - Q.01 7150.00 1 Sqm
187 Top Hung shutters in Structural Glazing 150 MAT-01490 BMT - Q.02 5645.00 1 Sqm
188 ..
Fixed Glazing 2'-0" x 2'-0" (609.6x609.6mm) and 2'-
a) 152, 153 MAT-01491, 1492 BMT - Q.03&04 5849.00 1 Sqm
0" x 3'-0" (609.6x914.4mm)
Fixed Glazing 3'-0" x 3'-0" (914.4x914.4mm), 3'-0" x
b) 153 MAT-01493 BMT - Q.05&06 4596.00 1 Sqm
4'-0" (914.4x1219.2mm)
189 Dismantling
a) Stone masonry in cement mortar 151 MAT-01498 BMT-S.01 498.00 1 Cum
b) Flat stone in roof or floors including lifting : 151 MAT-01500 BMT-S.03 182.00 10 Sqm
Pan tiled or Mangalore tiled roof with out roof
c) 151 MAT-01501 BMT-S.04 152.00 10 Sqm
timbers :
d) Wrought and framed timber in roofs or floors 151 MAT-01503 BMT-S.06 263.00 1 Cum
e) Old lime mortar plaster 151 MAT-01504 BMT-S.07 60.00 10 Sqm
f) Old cement mortar plaster 151 MAT-01505 BMT-S.08 75.00 10 Sqm
g) Kadapa slabs or shahabad stone slabs on sand bed 151 MAT-01508 BMT-S.11 84.00 10 Sqm
Clean removal of lime plaster from walls and raking
h) out joints 20mm deep or from terraced roof and 152 MAT-01511 BMT-S.14 55.00 10 Sqm
raking out joints 100 mm deep
Clean removal of cement plaster from walls and
i) 152 MAT-01512 BMT-S.15 68.00 10 Sqm
raking out joint 200 mm deep
202 Power Saw cutter - Hand Operated - Hire Charges 166 MAT-00206 BMC-X.02 132.00 1 hour
201 Power Drill - Hand Operated - Hire Charges 166 MAT-00207 BMC-X.03 121.00 1 hour
Reference
Material hire Labour
202 Hire charges for Access Scaffolding to SSR Unit
charges charges
page
A) Brick Masonry / Stone Maasonry
a) 1st floor 179 10.78 84.62 1 Sqm
b) 2nd floor 10.78 121.18 1 Sqm
c) 3rd floor 10.78 157.72 1 Sqm
d) 4th floor 10.78 194.27 1 Sqm
e) 5th floor 10.78 230.81 1 Sqm
f) 6th floor 10.78 267.35 1 Sqm
g) 7th floor 10.78 303.88 1 Sqm
h) 8th floor 10.78 340.43 1 Sqm
B) Plastering to walls
a) 1st floor 180 1.08 8.47 1 Sqm
b) 2nd floor 1.08 12.12 1 Sqm
c) 3rd floor 1.08 15.77 1 Sqm
d) 4th floor 1.08 19.43 1 Sqm
e) 5th floor 1.08 23.08 1 Sqm
f) 6th floor 1.08 26.73 1 Sqm
g) 7th floor 1.08 30.38 1 Sqm
h) 8th floor 1.08 34.05 1 Sqm
204 HIRE CHARGES FOR CENTERING&SCAFFOLDING-centering using Steel scaffolding pipes , jack props , wallers , Foot plate
Reference Material hire
to SoR charges
1st 2nd
3rd Floor
Floor Floor
a) Footings 179 301.00 672.00
b) Bed blocks, Bands 67.00 363.00 399.30 435.60
c) Pedestals 343.00 1069.00
d) Plinth beams 726.50 810.00
205 HIRE CHARGES FOR CENTERING & SCAFFOLDING -Unsupported height of 3.66M - for Steel scaffolding pipes, jack P
Reference Material hire
to SoR charges
1st 2nd
3rd Floor
Floor Floor
a) Lintels 179 1233.00 1720.00 1892.00 2064.00
b) Sunshades of any width 243.00 264.00 290.00 317.00
c) Columns 371.00 2415.00 2657.00 2898.00
d) Beams 2179.00 2027.00 2230.00 2432.00
e) RCC roof slabs upto 150 mm depth 247.00 241.00 265.00 289.00
f) RCC slabs upto 150-300 mm depth 254.00 248.00 273.00 298.00
g) Shear walls, RCC walls, Water tank walls 472.00 510.00 561.00 612.00
Note: - Centering & scaffolding charges for steel scaffolding with pipes, jack props, steel centring plates for unsupported heights of every 610 mm
M, may be allowed at 16.666% more than the basic material hire charges and relevant labour charges of the applicable floor and item
206 HIRE CHARGES FOR CENTERING & SCAFFOLDING -Unsupported height of 3.66M - Casurina Ballies , Bamboos , Wooden Reapers ,
Reference Posts , Wall Plates etc.,
Material hire
to SoR charges
1st 2nd
3rd Floor
Floor Floor
a) Lintels 179 826.00 1332.00 1465.00 1598.00
b) Sunshades of any width 163.00 204.00 224.00 245.00
c) Columns 249.00 1871.00 2058.00 2245.00
d) Beams 1458.00 1569.00 1726.00 1883.00
e) RCC roof slabs upto 150 mm depth 165.00 186.00 205.00 223.00
f) RCC slabs upto 150-300 mm depth 170.00 193.00 212.00 232.00
207
211 (WS&S
MAT-01993 BMW-G.106 1 Each
Items)
PVC Clamps(110mm dia) 17.00
Common SoR
LABOUR CHARGES
SKILLED
208 Bar bender 6 LAB-00001 I-1 750.00 1 Each
209 Blacksmith 6 LAB-00002 I-2 590.00 1 Each
210 Blaster 6 LAB-00003 I-3 690.00 1 Each
211 Carpenter 6 LAB-00004 I-4 705.00 1 Each
212 Work Inspector(Non technical) 6 LAB-00010 I -10 685.00 1 Each
213 Mason / Brick layer 6 LAB-00011 I -11 630.00 1 Each
214 Operator concrete mixer 6 LAB-00016 I -16 615.00 1 Each
215 Operator Jackhammer / Pneumatic tamper 6 LAB-00023 I - 23 615.00 1 Each
216 Painter 7 LAB-00035 I - 35 705.00 1 Each
217 Plumber / Pipe fitter 7 LAB-00036 I - 36 705.00 1 Each
SEMI SKILLED
Common SoR 2022-23 - Page : 598
Cost of Materials :
222 Binding wire 11 MAT-00003 3 70.00 1 Kg
223 Detonator electric 12 MAT-00021 21 12.00 1 No.
224 Sand (un-screened for concrete items) 12 MAT-00027 27(a) 605.00 1 Cum
225 Sand (unscreened) for filling 12 MAT-00028 27(b) 460.00 1 Cum
226 Sand(screened for mortar, plastering items) 12 MAT-00029 28 700.00 1 Cum
227 Impervious Water proof compound 14 MAT-00081 80 85.00 1 Kg
228 Gravel / Quarry spall 25 MAT-00177 M - 008 149.00 1 Cum
229 Coarse graded Granular sub-base Material 2.36
mm & below 26 MAT-00191 M - 022 547.00 1 Cum
230 Coarse graded Granular sub-base Material 9.5 mm
to 4.75mm 26 MAT-00194 M - 025 654.00 1 Cum
231 Aggregates 6mm nominal size (HBG) 27 MAT-00215 M - 050 865.00 1 Cum
232 Aggregates 10mm nominal size (HBG) 27 MAT-00216 M - 051 1070.00 1 Cum
233
Aggregates 13.20 / 12.50mm nominal size (HBG) 27 MAT-00217 M - 052 1260.00 1 Cum
234 Aggregates 20mm nominal size (HBG) 28 MAT-00218 M - 053 1565.00 1 Cum
235 Aggregates 25mm nominal size (HBG) 28 MAT-00219 M - 054 1501.00 1 Cum
236 Aggregates 40mm nominal size (HBG) 28 MAT-00220 M - 055 965.00 1 Cum
237 Bentonite 28 MAT-00235 M - 071 9.00 1 Kg
238 Gelatin 80% 30 MAT-00264 M - 104 68.00 1 Kg
239 Water charges(Urban) 35 MAT-00332 M - 189(a) 125.00 1 KL
240 Water charges(Rural) 35 MAT-00333 M - 189(b) 95.00 1 KL
Common SoR
241 Reference Hire &
Machinery Charges to SoR Fuel
charges
a) Agitator car / Transit mixer 2 cum 43 HIR-00001& LAB-00317 1 2227.90 1 Hour
b) Air compressor 7 cmm ( diesel) 43 HIR-00003& LAB-00319 3 1452.80 1 Hour
c) Batching plant 0.50 cum (6 cum/hour) 43 HIR-00009& LAB-00325 9 233.80 1 Hour
d) Batching plant 2x1.00 cum(15-20 cum/hour) 43 HIR-00010& LAB-00326 10 758.90 1 Hour
e) Concrete Mixer 10 / 7 cft (0.2 / 0.8 cum)capacity 43 HIR-00016& LAB-00329 16 188.10 1 Hour
f) Jack hammer 44 HIR-00039 39 18.60 1 Hour
g) Needle vibrator 40mm( petrol) 44 HIR-00040& LAB-00352 40 38.20 1 Hour
i) Shovel 0.85 cum 110hp 45 HIR-00052& LAB-00362 52 3157.40 1 Hour
j) Lift charges of materials(Winch 35HP- Electric) 46 HIR-00066& LAB-00372 66 340.50 1 Hour
k) Concrete placer pump (25 cum/hr)(Electric) 46 HIR-00071& LAB-00375 71 1417.40 1 Hour
248 Drilling 25mm dia. holes with pneumatic compressor 23 MAT-00512 143 167.00 1 RM
Hire charges of plants & machinery
249 Dozer (D50) 27 HIR-00072 2 1907.00 1 Hour
250 Mortar grader 27 HIR-00073 3 3722.00 1 Hour
251 Hydraulic excavator 27 HIR-00052 4 3483.70 1 Hour
252 Front end loader 27 HIR-00074 5 1983.00 1 Hour
Common SoR 2022-23 - Page : 599
3
Common SoR 2022-23 - Page : 601
Common SoR 2022-23 - Page : 602
Common SoR 2022-23 - Page : 603
BMT-M.12
52
43.5 46
Common SoR 2022-23 - Page : 604
Common SoR 2022-23 - Page : 605
5466
Common SoR 2022-23 - Page : 606
Common SoR 2022-23 - Page : 607
el scaffolding pipes , jack props , wallers , Foot plates , brackets , steel centering plates etc.,
Labour charges
4th 5th 6th 7th 8th
Floor Floor Floor Floor Floor
ed height of 3.66M - for Steel scaffolding pipes, jack Props, Steel Centering Plates,etc.,
Labour charges
4th 5th 6th 7th 8th
Floor Floor Floor Floor Floor
2236.00 2408.00 2580.00 2752.00 2924.00
343.00 370.00 396.00 422.00 449.00
3140.00 3381.00 3623.00 3864.00 4106.00
2635.00 2838.00 3041.00 3243.00 3446.00
313.00 337.00 362.00 386.00 410.00
322.00 347.00 372.00 397.00 422.00
663.00 714.00 765.00 816.00 867.00
centring plates for unsupported heights of every 610 mm height above 3.66
bour charges of the applicable floor and item
M - Casurina Ballies , Bamboos , Wooden Reapers , Runners , Wood
s etc.,
Labour charges
2021-22
700.00
550.00
645.00
655.00
640.00
585.00
575.00
575.00
655.00
655.00
Common SoR 2022-23 - Page : 608
525.00
525.00
525.00
525.00
525.00
490.00
64.00
10.00
605.00
460.00
700.00
79.00
138.00
517.00
593.00
790.00
977.00
1145.00
1418.00
1367.00
881.00
8.00
63.00
116.00
88.00
CFMS Crew
Total
number charges
100
0.05
Common SoR 2022-23 - Page : 609
Sl.
No. SoR
ITEM CFMS Code Item code Rate CFMS Code Labour Unit
Page No.
12
76.20mm (3") CI Nahany trap 1st quality 197 MAT-01775 BMW-C.41,42 302.000 LAB-00163 57.00 1 Each
13
Orissa pan 580mmx440mm - ISI marked 197 MAT-01783 BMW-D.04,06 1551.000 LAB-00165 428.00 1 Each
14 Brick masonry seat 198 MAT-01786 BMW-D.09 303.000 1 Each
15 C.C Squatting plate 198 MAT-01787 BMW-D.10 90.000 1 Each
16 S&F EWC with'S' trap 198 MAT-01790 BMW-D.14,15 1889.000 LAB-00168 300.00 1 Each
17 S&F Plastic seat and lid for EWC 198 MAT-01791 BMW-D.16,17 850.000 LAB-00169 87.00 1 Each
18 S&F EWC suit CASCADE model white
198 MAT-01792 BMW-D.18,15 9158.000 LAB-00168 300.00 1 Each
colour
19 S&F EWC suit CASCADE model
198 MAT-01793 BMW-D.19,15 13354.000 LAB-00168 300.00 1 Each
coloured
20 S&F EWC suit CASCADE model special
198 MAT-01794 BMW-D.20,15 16994.000 LAB-00168 300.00 1 Each
colour
21
Flat back Wash hand basin 1st quality
199, 200 MAT-01798 BMW-D.24,28 1736.000 LAB-00170 362.00 1 Each
550mmx400mm-single CP Pillar cock
27 Angle stop cock 12.70mm heavy duty 201 MAT-01812 BMW-E.05,06 453.000 LAB-00178 49.00 1 Each
28 12.70mm NP bib tap(long body) heavy
201 MAT-01813 BMW-E.07,08 387.000 LAB-00179 33.00 1 Each
duty
29 12.70mm NP bib tap(short body) heavy
201 MAT-01814 BMW-E.09,10 248.000 LAB-00180 33.00 1 Each
duty
30 S&F 31.75mm brass plumber union 201 MAT-01815 BMW-E.11,12 68.000 LAB-00181 16.00 1 Each
31 12.7mm dia. NP push cock 202 MAT-01826 BMW-E.29 259.000 1 Each
WS & SA SoR 2022-23 : Page-611
32 GM peet valves
a) 15mm NB 203 MAT-01847 BMW-F.21,22 604.000 LAB-00197 50.00 1 Each
b) 20mm NB 203 MAT-01846 BMW-F.19,20 812.000 LAB-00196 50.00 1 Each
c) 25mm NB 203 MAT-01845 BMW-F.17,18 1165.000 LAB-00195 50.00 1 Each
d) 32mm NB 203 MAT-01848 BMW-F.23,24 1768.000 LAB-00198 43.00 1 Each
e) 40mm NB 203 MAT-01849 BMW-F.25,26 2389.000 LAB-00199 75.00 1 Each
f) 50mm NB 203 MAT-01850 BMW-F.27,28 3498.000 LAB-00200 101.00 1 Each
g) 65mm NB 203 MAT-01851 BMW-F.29,30 5398.000 LAB-00201 119.00 1 Each
h) 80mm NB 203 MAT-01852 BMW-F.31,32 7995.000 LAB-00202 149.00 1 Each
33 S& F Nominal Bore GI pipe Medium
Grade properties & weight
a) 15mm Nominal bore 205 MAT-05243 BMW-F.79,80 199.000 LAB-00233 46.00 1 RM
b) 20mm Nominal bore 205 MAT-05244 BMW-F.81,82 220.000 LAB-00235 46.00 1 RM
c) 25mm Nominal bore 205, 206 MAT-05245 BMW-F.83,84 286.000 LAB-00237 46.00 1 RM
d) 32mm Nominal bore 206 MAT-05246 BMW-F.85,86 398.000 LAB-00239 46.00 1 RM
e) 40mm Nominal bore 206 MAT-05247 BMW-F.87,88 444.000 LAB-00241 50.00 1 RM
f) 50mm Nominal bore 206 MAT-05248 BMW-F.89,90 480.000 LAB-00243 76.00 1 RM
34 65mm Tata or Zenith make or
206 MAT-01870 BMW-F.91 837.000 1 RM
equivalent.
35 S & F 12.70 x 152.00 mm NP shower BMW-
206 MAT-01875 179.000 LAB-00248 22.00 1 Each
rose heavy F.100,101
70 CPVC Pipes
15.90mm OD pipe - SDR 13.5 227 MAT-02312 BMW-I.220 59.000 1 RM
22.20mm OD pipe - SDR 13.5 MAT-02313 BMW-I.221 94.000 1 RM
28.60mm OD pipe - SDR 13.5 MAT-02314 BMW-I.222 136.000 1 RM
34.90mm OD pipe - SDR 13.5 MAT-02315 BMW-I.223 214.000 1 RM
41.30mm OD pipe - SDR 13.5 MAT-02316 BMW-I.224 295.000 1 RM
54.00mm OD pipe - SDR 13.5 MAT-02317 BMW-I.225 485.000 1 RM
15.90mm OD pipe - SDR 11 MAT-02318 BMW-I.226 68.000 1 RM
22.20mm OD pipe - SDR 11 MAT-02319 BMW-I.227 103.000 1 RM
28.60mm OD pipe - SDR 11 MAT-02320 BMW-I.228 160.000 1 RM
34.90mm OD pipe - SDR 11 MAT-02321 BMW-I.229 254.000 1 RM
41.30mm OD pipe - SDR 11 MAT-02322 BMW-I.230 348.000 1 RM
54.00mm OD pipe - SDR 11 MAT-02323 BMW-I.231 535.000 1 RM
6 Supplying & Fixing 180mm dia PVC 118 Table 38 300.000 1 NO.
bore cap
b) Labour charges for aluminium doors ( S.No.11 of Page No. 396 of SoR 2011-12 )
LAB-00004 CSoR I - 4 1st class carpenter 0.099 Nos. 705.00 Each 69.80
LAB-00060 CSoR II - 4 2nd class carpenter 0.198 Nos. 565.00 Each 111.87
LAB-00004 CSoR I - 4 Power Saw Cutter -Hand Operated -Operator 0.099 Nos. 705.00 Each 69.80
LAB-00004
LAB-00120, CSoR I - 4 Power Drill -Hand Operated -Operator 0.099 Nos. 705.00 Each 69.80
LAB-
00121 CSoR III - 3,4 Mazdoor(Unskilled) 0.297 Nos. 525.00 Each 155.93
LAB-00010 CSoR I -10 Non-technical work inspector 0.099 Nos. 685.00 Each 67.82
Add for MAA @ 20% 0.20 545.00 109.00
Machinery
MAT-00206 BMC-X.02 Power Saw Cutter -Hand Operated -Hire charges 0.793 Hrs 132.00 1 Hour 104.68
MAT-00207 BMC-X.03 Power Drill -Hand Operated -Hire charges 0.793 Hrs 121.00 1 Hour 95.95
854.62
Power charges for Motors 1% 0.01 854.62 8.55
Labour charges per 1 sqm 863.17
c) Labour charges for aluminium sliding windows ( S.No.10 of Page No. 395 of SoR 2011-12 )
LAB-00004 CSoR I - 4 1st class carpenter 0.096 Nos. 705.00 Each 67.68
LAB-00060 CSoR II - 4 2nd class carpenter 0.289 Nos. 565.00 Each 163.29
LAB-00004 CSoR I - 4 Power Saw Cutter -Hand Operated -Operator 0.096 Nos. 705.00 Each 67.68
LAB-00004
LAB-00120, CSoR I - 4 Power Drill -Hand Operated -Operator 0.096 Nos. 705.00 Each 67.68
LAB-
00121 CSoR III - 3,4 Mazdoor(Unskilled) 0.289 Nos. 525.00 Each 151.73
LAB-00010 CSoR I -10 Non-technical work inspector 0.096 Nos. 685.00 Each 65.76
Add for MAA @ 20% 0.20 583.81 116.76
C.Machinery
MAT-00206 BMC-X.02 Power Saw Cutter -Hand Operated -Hire charges 0.771 Hrs 132.00 1 Hour 101.77
MAT-00207 BMC-X.03 Power Drill -Hand Operated -Hire charges 0.771 Hrs 121.00 1 Hour 93.29
895.64
Power charges for Motors 1% 0.01 895.64 8.96
Labour charges per 1 sqm 904.59
Joinery data 2021-22 - Page : 615
Joinery data 2021-22 - Page : 616
d) Labour charges for aluminium partitions partly glazed ( S.No.8 of Page No. 394 of SoR 2011-12 )
LAB-00004 CSoR I - 4 1st class carpenter 0.434 Nos. 705.00 Each 305.97
LAB-00060 CSoR II - 4 2nd class carpenter 0.434 Nos. 565.00 Each 245.21
LAB-00004 CSoR I - 4 Power Saw Cutter -Hand Operated -Operator 0.043 Nos. 705.00 Each 30.32
LAB-00004
LAB-00120, CSoR I - 4 Power Drill -Hand Operated -Operator 0.058 Nos. 705.00 Each 40.89
LAB-
00121 CSoR III - 3,4 Mazdoor(Unskilled) 0.145 Nos. 525.00 Each 76.13
LAB-00010 CSoR I -10 Non-technical work inspector 0.072 Nos. 685.00 Each 49.32
Add for MAA @ 20% 0.20 747.83 149.57
C.Machinery
MAT-00206 BMC-X.02 Power Saw Cutter -Hand Operated -Hire charges 0.347 Hrs 132.00 1 Hour 45.80
MAT-00207 BMC-X.03 Power Drill -Hand Operated -Hire charges 0.463 Hrs 121.00 1 Hour 56.02
999.22
Power charges for Motors 1% 0.01 999.22 9.99
Labour charges per 1 sqm 1009.22
e) Labour charges for aluminium casement windows ( S.No.9 of Page No. 394 of SoR 2011-12 )
LAB-00004 CSoR I - 4 1st class carpenter 0.100 Nos. 705.00 Each 70.50
LAB-00060 CSoR II - 4 2nd class carpenter 0.300 Nos. 565.00 Each 169.50
LAB-00004 CSoR I - 4 Power Saw Cutter -Hand Operated -Operator 0.100 Nos. 705.00 Each 70.50
LAB-00004
LAB-00120, CSoR I - 4 Power Drill -Hand Operated -Operator 0.100 Nos. 705.00 Each 70.50
LAB-
00121 CSoR III - 3,4 Mazdoor(Unskilled) 0.300 Nos. 525.00 Each 157.50
LAB-00010 CSoR I -10 Non-technical work inspector 0.100 Nos. 685.00 Each 68.50
Add for MAA @ 20% 0.20 607.00 121.40
C.Machinery
MAT-00206 BMC-X.02 Power Saw Cutter -Hand Operated -Hire charges 0.800 Hrs 132.00 1 Hour 105.60
MAT-00207 BMC-X.03 Power Drill -Hand Operated -Hire charges 0.800 Hrs 121.00 1 Hour 96.80
930.80
Power charges for Motors 1% 0.01 930.80 9.31
Labour charges per 1 sqm 940.11
1 Supply and fixing of two shutter main door cum fixed window as per approved drawing with best teak wood frame of section 150mm x
100 mm with fixed fan light of 500mm at top and fixed panels of 600mm width at sides fixed with 12mm thick Tinted - Bronze/Green glass
using 12mm x 12mm teak wood beading and fixing ornamental grill made of 25mm x 5mm MS flats as per the approved drawing in fan light
portion and fixed panels and 1st class teak wood top and middle rails & styles of section 120mm x 35mm, bottom rail of size 150mm x 35mm
and 12mm thick plain float glass for shutter with ornamental etching including cost and
conveyance to site of teak wood frame, shutters, glass including supply and fixing 6 Nos MS Z hold fasts of size 300 mm x 40 mm x 5mm
including cost of ISI marked brass fixtures of 6 Nos butt hinges(IS:205) 150mm long , 1 No. aldrop (IS:2681) 450mm long, 3 Nos tower bolts-
10mm (IS:204) of 200 mm long , 2 Nos 450 mm long fancy handles, 2 Nos door stoppers, 2 Nos. Rubber / Nylon door stop bushes including
fixing the fixtures to door with required number of screws, bolt and nuts including labour charges for fixing the frame in position, fixing the
shutters to the frame, fixing glass in fan light portion etc., including overheads & contractors profit complete for finished item of work as per
APSS 1001 & 1002 (The vertical frame of door shall be embedded in flooring for a depth of not less than 40 mm) (3000mm x 2600mm)
Cost analysis
MAT-00851 BMT - E.06 Cost of best TW frame 2 m to 3m length 0.1680 Cum 142480.00 1 Cum 23936.64
MAT-00850 BMT - E.05 Cost of best TW frame up to 2 m length 0.1724 Cum 134500.00 1 Cum 23187.80
MAT-01063 BMT-I.12 Cost of 12mm thick tinted glass 6.12 Sqm 1800.00 1 Sqm 11016.00
Joinery data 2021-22 - Page : 619
MAT-01057 BMT-I.06 Cost of 12mm thick plain float glass 3.78 Sqm 1375.00 1 Sqm 5197.50
Cost of teak wood beading 44.80 RM 21.58 1 RM 966.78
MAT-00921 BMT-G.22 Cost of 150mm long brass butt hinges 6 Nos 356.00 Each 2136.00
MAT-00967 BMT-G.62 Cost of 450mm long brass fancy handles 2 Nos 1600.00 Each 3200.00
MAT-00944 BMT-G.39 Cost of 450mm long brass heavy duty aldrop 1 No 3255.00 Each 3255.00
MAT-00908 BMT-G.03 Cost of 200mm long brass tower bolts 3 Nos 350.00 Each 1050.00
MAT-00951 BMT-G.46 Cost of brass door stoppers 2 Nos 185.00 Each 370.00
MAT-01639 BMT-W.69 Cost of Z hold fasts 6 Nos 39.00 Each 234.00
MAT-01640 BMT-W.70 Cost of Rubber / Nylon door stop bushes 2 Nos 11.00 Each 22.00
Cost of MS Ornamental Grill 6.12 Sqm 2262.05 1 Sqm 13843.72
Labour charges 0.3404 Cum 15363.90 1 Cum 5229.87
Add for MAA @ 20% 0.20 5229.87 1045.97
LAB-00430 BMM-V.24 Labour charges for fixing glass 9.90 Sqm 315.00 1 Sqm 3118.50
Add for MAA @ 20% 0.20 3118.50 623.70
LAB-00426 BMM-V.20 Labour charges for glass designing work( Etching work) 3.78 Sqm 1051.00 1 Sqm 3972.78
Add for screws and nails 1.82
Rate for 7.80 sqm ###
Rate for 1 sqm 13129.24
Overheads&Contractors Profit @13.615% 0.13615 13129.24 1787.55
Rate for 1 sqm 14916.79
Say 14917
Supply and fixing of ornamental grill made of 25mm x 5mm MS flats for fixing in fan light portion and side fixed panels for door cum
window as per the approved drawing including cutting the flat to required length, welding, painting with red oxide single coat including cost
and conveyance of all materials, labour charges etc., complete for finished otem of work.
for grill of size 535mm x 435mm 0.2327 Sqm
MS flats: 4(0.535+0.435)+4x0.1+2x0.38 5.04 RM 1 Kg/RM 5.04 Kgs
Cost of MS flats 5.04 Kgs 62000.00 1000 Kgs 312.48
LAB-00420 BMM-V.14 Labour charges for fabrication of steel 5.04 Kgs 30.00 1 Kg 151.20
LAB-00421 BMM-V.15 Labour charges for fixing 5.04 Kgs 6.00 1 Kg 30.24
Add for MAA @ 20% 0.20 90.72 18.14
Painting with red oxide 0.2327 Sqm 617.49 10 Sqm 14.37
Rate per 0.2327 Sqm 526.43
Rate per 1 Sqm 2262.05
Painting with Red oxide
MAT-01075 BMT-J.03 Cost of red oxide 0.70 Ltr 145.00 1 Ltr 101.50
LAB-00035 CSoR I - 35 Painter 1st class 0.21 Nos. 705.00 1 Each 148.05
LAB-00093 CSoR II - 37 Painter 2st class 0.49 Nos. 565.00 1 Each 276.85
Add for MAA @ 20% 0.20 424.90 84.98
Sundries including brushes , ladders etc., @ 1% 0.01 611.38 6.11
617.49
Joinery data 2021-22 - Page : 620
2 Supply and fixing of doors as per approved drawings with best teak wood frame of section 100mm x 65 mm with fixed fan light of 500mm
at the top fixed with 4mm thick pin headed glass using 12mm x 12mm Teak Wood beading and 2 Nos. of 10mm MS Square bars and ISI
marked flush door shutter of 30mm thick double shutters with bond wood solid block board type core having cross bands and face veneers,
hot pressed bonded with water proof phenol formaldehyde synthetic resin factory made conforming to IS 2202-1991 (Part-I) both sides
commercial ply with internal lipping on all sides
including cost and conveyance to site of teak wood frame, flush shutter including supply and fixing 6 nos MS Z hold fasts of size 300 mm x
40 mm x 5mm including cost of ISI marked brass fixtures of 6 Nos butt hinges (IS:205) 150mm long , 1 No. aldrop (IS:2681) 300mm long, 2
Nos tower bolts- 10mm (IS:204) of 200 mm long at top, 1 No. tower bolt- 10mm bolt (IS:204) 150mm long at bottom, 2 Nos. 150mm long
fancy handles (IS:208) , 2 Nos door stopper and 2 Nos Rubber / Nylon door stop bushes including fixing the fixtures to door with required
number of screws, bolt and nuts including labour charges for fixing the frame in position, fixing the shutter to the frame, fixing glass in fan light
portion etc., including overheads & contractors profit complete for finished item of work as per APSS 1001 & 1002 The vertical frame of door
shall be embedded in flooring for a depth of not less than 10 mm) (2000mm x 2600mm)
(BLD-CSTN-13-16)
Size : 2.00m x 2.60 m 5.20 sqm
Quantity analysis
Outer frame - Vertical 2 x 2.61
= 5.22 x 0.10 x 0.065 0.03393 cum
Outer frame - Horizontal 2 x 2.00 + 0.50
= 4.50 x 0.10 x 0.065 0.02925 cum
0.06318 cum
Cost analysis
MAT-00851 BMT - E.06 Cost of best TW frame 2 m to 3m length 0.03393 cum 142480.00 1 cum 4834.35
MAT-00850 BMT - E.05 Cost of best TW frame up to 2 m length 0.02925 cum 134500.00 1 cum 3934.13
MAT-01064 BMT-I.13 Cost of 4 mm thick pin headed glass 1.00 sqm 370.00 1 sqm 370.00
Cost of TW beading 6.00 RM 21.58 1 RM 129.48
MAT-01345 BMT-N-16 Cost of 30 mm thick flush shutter 3.895 sqm 1400.00 1 sqm 5453.00
MAT-01639 BMT-W.69 Cost of MS Z hold fasts 6 Nos. 39.00 Each 234.00
MAT-00908 BMT-G.03 Cost of brass tower bolt 200mm long 2 Nos. 350.00 Each 700.00
MAT-00907 BMT-G.02 Cost of brass tower bolt 150mm long 1 No. 255.00 Each 255.00
MAT-00921 BMT-G.22 Cost of brass Butt hinges 150mm long 6 Nos. 356.00 Each 2136.00
MAT-00942 BMT-G.37 Cost of brass aldrop 300mm long 1 No. 1195.00 Each 1195.00
MAT-00963 BMT-G.58 Cost of brass fancy handle 150mm long 2 Nos. 328.00 Each 656.00
MAT-00951 BMT-G.46 Cost of brass door stopper 2 Nos. 185.00 Each 370.00
Joinery data 2021-22 - Page : 621
MAT-01640 BMT-W.70 Cost of Rubber / Nylon door stop bushes 2 Nos. 11.00 Each 22.00
Cost of 10mm MS square bars 3.14 Kgs 62000.00 1000 Kgs 194.68
Labour charges for frame work 0.06318 cum 15363.90 1 cum 970.69
Add for MAA @ 20% 0.20 970.69 194.14
LAB-00429 BMM-V.23 Labour charges for fixing flush door shutter to the frame , fixing the
fixtures to the shutter 3.895 sqm 421.00 1 sqm 1639.80
Add for MAA @ 20% 0.20 1639.80 327.96
LAB-00430 BMM-V.24 Labour charges for fixing glass 1.00 sqm 315.00 1 sqm 315.00
Add for MAA @ 20% 0.20 315.00 63.00
Add for nails & screws etc. 0.77
Rate for 5.20 sqm 23994.98
Overheads&Contractors Profit @13.615% 0.13615 23994.98 3266.92
27261.90
Rate for 1 sqm 5242.67
Say 5243
3 Supply and fixing of doors as per approved drawings with best teak wood frame of section 100mm x 65 mm with fixed fan light of 500mm
at the top fixed with 4mm thick pin headed glass using 12mm x 12mm Teak Wood beading and 2 Nos. of 10mm MS Square bars and ISI
marked flush door shutter of 30mm thick double shutters with bond wood solid block board type core having cross bands and face veneers,
hot pressed bonded with water proof phenol formaldehyde synthetic resin factory made conforming to IS 2202-1991 (Part-I) both sides
commercial ply with internal lipping on all sides, fixing 1mm thick mat finish laminated sheet to full width and height of the flush shutter
both sides
including cost and conveyance to site of teak wood frame, flush shutter, laminate sheet including supply and fixing 6 nos MS Z hold fasts of
size 300 mm x 40 mm x 5mm including cost of ISI marked brass fixtures of 6 Nos butt hinges (IS:205) 150mm long , 1 No. aldrop (IS:2681)
300mm long, 2 Nos tower bolts- 10mm (IS:204) of 200 mm long at top, 1 No. tower bolt- 10mm bolt (IS:204) 150mm long at bottom, 2 Nos.
150mm long fancy handles (IS:208) , 2 Nos door stopper and 2 Nos Rubber / Nylon door stop bushes including fixing the fixtures to door
with required number of screws, bolt and nuts including labour charges for fixing the frame in position, fixing the shutter to the frame, fixing
glass in fan light portion etc., including overheads & contractors profit complete for finished item of work as per APSS 1001 & 1002 The
vertical frame of door shall be embedded in flooring for a depth of not less than 10 mm) (2000mm x 2600mm)
(BLD-CSTN-13-16)
Size : 2.00m x 2.60 m 5.20 sqm
Quantity analysis
Outer frame - Vertical 2 x 2.61
= 5.22 x 0.10 x 0.065 0.03393 cum
Outer frame - Horizontal 2 x 2.00 + 0.50
= 4.50 x 0.10 x 0.065 0.02925 cum
0.06318 cum
including cost and conveyance to site of teak wood frame, flush shutter including supply and fixing 6 Nos. MS Z hold fasts of size 300 mm x
40 mm x 5mm including cost of ISI marked Aluminium fixtures of 6 Nos. butt hinges (IS:205) 150mm long, 1 No. aldrop (IS:2681) 300mm
long, 2 Nos. tower bolts - 10mm (IS:204) of 200 mm long at top, 2 Nos. 150mm long handles (IS:208), 2 Nos. door stoppers and 2 Nos.
Rubber / Nylon door stop bushes including fixing the fixtures to door with required number of screws, bolt and nuts including labour charges
for fixing the frame in position, fixing the shutter to the frame, fixing glass in fan light portion etc., including overheads & contractors profit
complete for finished item of work as per APSS 1001 & 1002 The vertical frame of door shall be embedded in flooring for a depth of not less
than 10 mm) (1800mm x 2600mm)
(BLD-CSTN-13-16)
Size : 1.80m x 2.60m 4.68 sqm
Quantity analysis
Outer frame - Vertical 2 x 2.61
= 5.22 x 0.10 x 0.065 0.03393 cum
Outer frame - Horizontal 2 x 1.80 + 0.50
= 4.10 x 0.10 x 0.065 0.02665 cum
0.06058 cum
5 Supply and fixing of doors as per approved drawings with medium teak wood frame of section 100mm x 65 mm with fixed fan light of
500mm at the top fixed with 4mm thick pin headed glass using 12mm x 12mm Teak Wood beading and 2 Nos. of 10mm MS Square bars and
ISI marked flush door shutter of 30mm thick double shutters with bond wood solid block board type core having cross bands and face
veneers, hot pressed bonded with water proof phenol formaldehyde synthetic resin factory made conforming to IS 2202-1991 (Part-I) both
sides commercial ply with internal lipping on all sides, fixing 1mm thick mat finish laminated sheet to full width and height of the flush
shutter both sides
including cost and conveyance to site of teak wood frame, flush shutter, laminate sheet including supply and fixing 6 Nos. MS Z hold fasts
of size 300 mm x 40 mm x 5mm including cost of ISI marked Aluminium fixtures of 6 Nos. butt hinges (IS:205) 150mm long, 1 No. aldrop
(IS:2681) 300mm long, 2 Nos. tower bolts - 10mm (IS:204) of 200 mm long at top, 2 Nos. 150mm long handles (IS:208), 2 Nos. door
stoppers and 2 Nos. Rubber / Nylon door stop bushes including fixing the fixtures to door with required number of screws, bolt and nuts
including labour charges for fixing the frame in position, fixing the shutter to the frame, fixing glass in fan light portion etc., including
overheads & contractors profit complete for finished item of work as per APSS 1001 & 1002 The vertical frame of door shall be embedded in
flooring for a depth of not less than 10 mm) (1800mm x 2600mm)
(BLD-CSTN-13-16)
Size : 1.80m x 2.60m 4.68 sqm
Quantity analysis
Outer frame - Vertical 2 x 2.61
= 5.22 x 0.10 x 0.065 0.03393 cum
Outer frame - Horizontal 2 x 1.80 + 0.50
= 4.10 x 0.10 x 0.065 0.02665 cum
0.06058 cum
6 Supply and fixing of doors as per approved drawings with medium teak wood frame of section 100mm x 65 mm with split type fan light
of 500mm at the top fixed with 4mm thick pin headed glass using 12mm x 12mm Teak Wood beading and 2 Nos. of 10mm MS Square bars
and ISI marked flush door shutter of 30mm thick double shutters with bond wood solid block board type core having cross bands and face
veneers, hot pressed bonded with water proof phenol formaldehyde synthetic resin factory made conforming to IS 2202-1991 (Part-I) both
sides commercial ply with internal lipping on all sides,
including cost and conveyance to site of teak wood frame, flush shutter including supply and fixing 6 Nos. MS Z hold fasts of size 300 mm x
40 mm x 5mm including cost of ISI marked Alumimium fixtures of 6 Nos. butt hinges (IS:205) 150mm long, 1 No. aldrop (IS:2681) 300mm
long, 2 Nos. tower bolts (IS:204) of 200 mm x 10 mm dia at top, 2 Nos. 150mm long handles (IS:208), 2 Nos. door stoppers and 2 Nos.
Rubber / Nylon door stop bushes including fixing the fixtures to door with required number of screws, bolt and nuts including labour charges
for fixing the frame in position, fixing the shutter to the frame, fixing glass in fan light portion etc., including overheads & contractors profit
complete for finished item of work as per APSS 1001 & 1002 (The vertical frame of door shall be embedded in flooring for a depth of not less
than 10 mm) (1500mm x 2600mm)
Joinery data 2021-22 - Page : 627
(BLD-CSTN-13-16)
Size : 1.50m x 2.60m 3.90 sqm
Quantity analysis
Outer frame - Vertical 2 x 2.61
= 5.22 x 0.10 x 0.065 0.03393 cum
Outer frame - Horizontal 2 x 1.50 + 0.50
= 3.50 x 0.10 x 0.065 0.02275 cum
0.05668 cum
Cost analysis
MAT-00847 BMT - E.02 Cost of medium TW frame 2 m to 3m length 0.03393 cum 92130.00 1 cum 3125.97
MAT-00846 BMT - E.01 Cost of medium TW frame up to 2 m length 0.02275 cum 81950.00 1 cum 1864.36
MAT-01064 BMT-I.13 Cost of 4 mm thick pin headed glass 0.90 sqm 370.00 1 sqm 333.00
Cost of TW beading 8.40 RM 21.58 1 RM 181.27
MAT-01345 BMT-N-16 Cost of 30 mm thick flush shutter 2.87 sqm 1400.00 1 sqm 4018.00
MAT-01639 BMT-W.69 Cost of MS Z hold fasts 6 Nos. 39.00 Each 234.00
MAT-00914 BMT-G.09 Cost of Aluminium tower bolt 200mm long 2 Nos. 108.00 Each 216.00
MAT-00931 BMT-G.26 Cost of Aluminium butt hinges 150mm long 6 Nos. 133.00 Each 798.00
MAT-00947 BMT-G.42 Cost of Aluminium aldrop 300mm long 1 No. 338.00 Each 338.00
MAT-00939 BMT-G.34 Cost of Aluminium handle 150mm long 2 Nos. 114.00 Each 228.00
MAT-00962 BMT-G.57 Cost of Aluminium door stopper 2 Nos. 58.00 Each 116.00
MAT-01640 BMT-W.70 Cost of Rubber / Nylon door stop bushes 2 Nos. 11.00 Each 22.00
Cost of 10mm MS square bars 2.355 Kgs 62000.00 1000 Kgs 146.01
Labour charges for frame work 0.05668 cum 15363.90 1 cum 870.83
Add for MAA @ 20% 0.20 870.83 174.17
LAB-00429 BMM-V.23 Labour charges for fixing flush door shutter to the frame , fixing the
fixtures to the shutter 2.87 sqm 421.00 1 sqm 1208.27
Add for MAA @ 20% 0.20 1208.27 241.65
LAB-00430 BMM-V.24 Labour charges for fixing glass 0.90 sqm 315.00 1 sqm 283.50
Add for MAA @ 20% 0.20 283.50 56.70
Add for nails & screws etc. 3.36
Rate for 3.90 sqm 14459.09
Overheads&Contractors Profit @13.615% 0.13615 14459.09 1968.61
16427.70
Rate for 1 sqm 4212.23
Say 4212
Joinery data 2021-22 - Page : 628
Joinery data 2021-22 - Page : 629
7 Supply and fixing of doors as per approved drawings with medium teak wood frame of section 100mm x 65 mm with split type fan light
of 500mm at the top fixed with 4mm thick pin headed glass using 12mm x 12mm Teak Wood beading and 2 Nos. of 10mm MS Square bars
and ISI marked flush door shutter of 30mm thick double shutters with bond wood solid block board type core having cross bands and face
veneers, hot pressed bonded with water proof phenol formaldehyde synthetic resin factory made conforming to IS 2202-1991 (Part-I) both
sides commercial ply with internal lipping on all sides, fixing 1mm thick mat finish laminated sheet to full width and height of the flush
shutter both sides
including cost and conveyance to site of teak wood frame, flush shutter, laminate sheet including supply and fixing 6 Nos. MS Z hold fasts of
size 300 mm x 40 mm x 5mm including cost of ISI marked Alumimium fixtures of 6 Nos. butt hinges (IS:205) 150mm long, 1 No. aldrop
(IS:2681) 300mm long, 2 Nos. tower bolts (IS:204) of 200 mm x 10 mm dia at top, 2 Nos. 150mm long handles (IS:208), 2 Nos. door stoppers
and 2 Nos. Rubber / Nylon door stop bushes including fixing the fixtures to door with required number of screws, bolt and nuts including
labour charges for fixing the frame in position, fixing the shutter to the frame, fixing glass in fan light portion etc., including overheads &
contractors profit complete for finished item of work as per APSS 1001 & 1002 (The vertical frame of door shall be embedded in flooring for a
depth of not less than 10 mm) (1500mm x 2600mm)
(BLD-CSTN-13-16)
Size : 1.50m x 2.60m 3.90 sqm
Quantity analysis
Outer frame - Vertical 2 x 2.61
= 5.22 x 0.10 x 0.065 0.03393 cum
Outer frame - Horizontal 2 x 1.50 + 0.50
= 3.50 x 0.10 x 0.065 0.02275 cum
0.05668 cum
Cost analysis
MAT-00847 BMT - E.02 Cost of medium TW frame 2 m to 3m length 0.03393 cum 92130.00 1 cum 3125.97
MAT-00846 BMT - E.01 Cost of medium TW frame up to 2 m length 0.02275 cum 81950.00 1 cum 1864.36
MAT-01064 BMT-I.13 Cost of 4 mm thick pin headed glass 0.90 sqm 370.00 1 sqm 333.00
Cost of TW beading 8.40 RM 21.58 1 RM 181.27
MAT-01345 BMT-N-16 Cost of 30 mm thick flush shutter 2.87 sqm 1400.00 1 sqm 4018.00
MAT-01208 BMT-L.24 Cost of 1mm thick mat finish laminated sheet 5.74 sqm 400.00 1 sqm 2296.00
Labour charges for fixing laminated sheet 100.00
MAT-01639 BMT-W.69 Cost of MS Z hold fasts 6 Nos. 39.00 Each 234.00
MAT-00914 BMT-G.09 Cost of Aluminium tower bolt 200mm long 2 Nos. 108.00 Each 216.00
MAT-00931 BMT-G.26 Cost of Aluminium butt hinges 150mm long 6 Nos. 133.00 Each 798.00
MAT-00947 BMT-G.42 Cost of Aluminium aldrop 300mm long 1 No. 338.00 Each 338.00
MAT-00939 BMT-G.34 Cost of Aluminium handle 150mm long 2 Nos. 114.00 Each 228.00
Joinery data 2021-22 - Page : 630
MAT-00962 BMT-G.57 Cost of Aluminium door stopper 2 Nos. 58.00 Each 116.00
MAT-01640 BMT-W.70 Cost of Rubber / Nylon door stop bushes 2 Nos. 11.00 Each 22.00
Cost of 10mm MS square bars 2.355 Kgs 62000.00 1000 Kgs 146.01
Labour charges for frame work 0.05668 cum 15363.90 1 cum 870.83
Add for MAA @ 20% 0.20 870.83 174.17
LAB-00429 BMM-V.23 Labour charges for fixing flush door shutter to the frame , fixing the
fixtures to the shutter 2.87 sqm 421.00 1 sqm 1208.27
Add for MAA @ 20% 0.20 1208.27 241.65
LAB-00430 BMM-V.24 Labour charges for fixing glass 0.90 sqm 315.00 1 sqm 283.50
Add for MAA @ 20% 0.20 283.50 56.70
Add for nails & screws etc. 4.56
Rate for 3.90 sqm 16856.29
Overheads&Contractors Profit @13.615% 0.13615 16856.29 2294.98
19151.27
Rate for 1 sqm 4910.58
Say 4911
8 Supply and fixing of doors as per approved drawings with medium teak wood frame of section 100mm x 65 mm with split type fan light
of 500mm at the top fixed with 4mm thick pin headed glass using 12mm x 12mm Teak Wood beading and 2 Nos. of 10mm MS Square bars
and ISI marked flush door shutter of 30mm thick double shutters with bond wood solid block board type core having cross bands and face
veneers, hot pressed bonded with water proof phenol formaldehyde synthetic resin factory made conforming to IS 2202-1991 (Part-I) both
sides commercial ply with internal lipping on all sides,
including cost and conveyance to site of teak wood frame, flush shutter including supply and fixing 6 Nos. MS Z hold fasts of size 300 mm x
40 mm x 5mm including cost of ISI marked Aluminium fixtures of 6 Nos. butt hinges (IS:205) 150mm long, 1 No. aldrop (IS:2681) 300mm
long, 2 Nos. tower bolts (IS:204) of 200 mm x 10 mm dia at top, 2 Nos. 150mm long handles (IS:208), 2 Nos. door stoppers and 2 Nos.
Rubber / Nylon door stop bushes including fixing the fixtures to door with required number of screws, bolt and nuts including labour charges
for fixing the frame in position, fixing the shutter to the frame, fixing glass in fan light portion etc, including overheads & contractors profit
complete for finished item of work as per APSS 1001 & 1002 (The vertical frame of door shall be embedded in flooring for a depth of not less
than 10 mm) (1200mm x 2600mm)
(BLD-CSTN-13-16)
Size : 1.20m x 2.60m 3.12 sqm
Quantity analysis
Outer frame - Vertical 2 x 2.61
= 5.22 x 0.10 x 0.065 0.03393 cum
Outer frame - Horizontal 2 x 1.20 + 0.50
= 2.90 x 0.10 x 0.065 0.01885 cum
0.05278 cum
including cost and conveyance to site of teak wood frame, flush shutter, laminate sheet including supply and fixing 6 Nos. MS Z hold fasts of
size 300 mm x 40 mm x 5mm including cost of ISI marked Aluminium fixtures of 6 Nos. butt hinges (IS:205) 150mm long, 1 No. aldrop
(IS:2681) 300mm long, 2 Nos. tower bolts (IS:204) of 200 mm x 10 mm dia at top, 2 Nos. 150mm long handles (IS:208), 2 Nos. door
stoppers and 2 Nos. Rubber / Nylon door stop bushes including fixing the fixtures to door with required number of screws, bolt and nuts
including labour charges for fixing the frame in position, fixing the shutter to the frame, fixing glass in fan light portion etc, including overheads
& contractors profit complete for finished item of work as per APSS 1001 & 1002 (The vertical frame of door shall be embedded in flooring for
a depth of not less than 10 mm) (1200mm x 2600mm)
(BLD-CSTN-13-16)
Size : 1.20m x 2.60m 3.12 sqm
Quantity analysis
Outer frame - Vertical 2 x 2.61
= 5.22 x 0.10 x 0.065 0.03393 cum
Outer frame - Horizontal 2 x 1.20 + 0.50
= 2.90 x 0.10 x 0.065 0.01885 cum
0.05278 cum
Cost analysis
MAT-00847 BMT - E.02 Cost of medium TW frame 2 m to 3m length 0.03393 cum 92130.00 1 cum 3125.97
MAT-00846 BMT - E.01 Cost of medium TW frame up to 2 m length 0.01885 cum 81950.00 1 cum 1544.76
MAT-01064 BMT-I.13 Cost of 4 mm thick pin headed glass 0.72 sqm 370.00 1 sqm 266.40
Cost of TW beading 7.20 RM 21.58 1 RM 155.38
MAT-01345 BMT-N-16 Cost of 30 mm thick flush shutter 2.255 sqm 1400.00 1 sqm 3157.00
MAT-01208 BMT-L.24 Cost of 1mm thick mat finish laminated sheet 4.51 sqm 400.00 1 sqm 1804.00
Labour charges for fixing laminated sheet 100.00
MAT-01639 BMT-W.69 Cost of MS Z hold fasts 6 Nos. 39.00 Each 234.00
MAT-00914 BMT-G.09 Cost of Aluminium tower bolt 200mm long 2 Nos. 108.00 Each 216.00
MAT-00931 BMT-G.26 Cost of Aluminium butt hinges 150mm long 6 Nos. 133.00 Each 798.00
MAT-00947 BMT-G.42 Cost of Aluminium aldrop 300mm long 1 No. 338.00 Each 338.00
MAT-00939 BMT-G.34 Cost of Aluminium handle 150mm long 2 Nos. 114.00 Each 228.00
Joinery data 2021-22 - Page : 634
MAT-00962 BMT-G.57 Cost of Aluminium door stopper 2 Nos. 58.00 Each 116.00
MAT-01640 BMT-W.70 Cost of Rubber / Nylon door stop bushes 2 Nos. 11.00 Each 22.00
Cost of 10mm MS square bars 1.884 Kgs 62000.00 1000 Kgs 116.81
Labour charges for frame work 0.0528 cum 15363.90 1 cum 810.91
Add for MAA @ 20% 0.20 810.91 162.18
LAB-00429 BMM-V.23 Labour charges for fixing flush door shutter to the frame , fixing the
fixtures to the shutter 2.255 sqm 421.00 1 sqm 949.36
Add for MAA @ 20% 0.20 949.36 189.87
LAB-00430 BMM-V.24 Labour charges for fixing glass 0.72 sqm 315.00 1 sqm 226.80
Add for MAA @ 20% 0.20 226.80 45.36
Add for nails & screws etc. 2.87
Rate for 3.12 sqm 14609.66
Overheads&Contractors Profit @13.615% 0.13615 14609.66 1989.10
16598.76
Rate for 1 sqm 5320.12
Say 5320
10 Supply and fixing of doors as per approved drawings with medium teak wood frame of section 100mm x 65 mm with split type fan light
of 500mm at the top fixed with 4mm thick pin headed glass using 12mm x 12mm Teak Wood beading and 2 Nos. of 10mm MS Square bars
and ISI marked flush door shutter of 30mm thick single shutter with bond wood solid block board type core having cross bands and face
veneers, hot pressed bonded with water proof phenol formaldehyde synthetic resin factory made conforming to IS 2202-1991 (Part-I) both
sides commercial ply with internal lipping on all sides including cost and conveyance to site of teak wood frame, flush shutter including
supply and fixing
6 Nos. MS Z hold fasts of size 300 mm x 40 mm x 5mm including cost of ISI marked Aluminium fixtures of 3 Nos. butt hinges (IS:205) 150mm
long , 1 No. aldrop (IS:2681) 300mm long, 1 No. tower bolt (IS:204) of 200 mm x 10 mm dia at top, 2 Nos. 150mm long handles (IS:208), 1
No. door stopper and 1 No. Rubber / Nylon door stop bushes including fixing the fixtures to door with required number of screws, bolt and
nuts including labour charges for fixing the frame in position, fixing the shutter to the frame, fixing glass in fan light portion etc, including
overheads & contractors profit complete for finished item of work as per APSS 1001 & 1002 (The vertical frame of door shall be embedded in
flooring for a depth of not less than 10 mm) (1000mm x 2600mm)
(BLD-CSTN-13-16)
Size : 1.00m x 2.60m 2.60 sqm
Quantity analysis
Outer frame - Vertical 2 x 2.61
= 5.22 x 0.10 x 0.065 0.03393 cum
Outer frame - Horizontal 2 x 1.00
= 2.00 x 0.10 x 0.065 0.01300 cum
0.04693 cum
6 Nos. MS Z hold fasts of size 300 mm x 40 mm x 5mm including cost of ISI marked Aluminium fixtures of 3 Nos. butt hinges (IS:205) 150mm
long , 1 No. aldrop (IS:2681) 300mm long, 1 No. tower bolt (IS:204) of 200 mm x 10 mm dia at top, 2 Nos. 150mm long handles (IS:208), 1
No. door stopper and 1 No. Rubber / Nylon door stop bushes including fixing the fixtures to door with required number of screws, bolt and
nuts including labour charges for fixing the frame in position, fixing the shutter to the frame, fixing glass in fan light portion etc, including
overheads & contractors profit complete for finished item of work as per APSS 1001 & 1002 (The vertical frame of door shall be embedded in
flooring for a depth of not less than 10 mm) (1000mm x 2600mm)
(BLD-CSTN-13-16)
Size : 1.00m x 2.60m 2.60 sqm
Quantity analysis
Outer frame - Vertical 2 x 2.61
= 5.22 x 0.10 x 0.065 0.03393 cum
Outer frame - Horizontal 2 x 1.00
= 2.00 x 0.10 x 0.065 0.01300 cum
0.04693 cum
Cost analysis
MAT-00847 BMT - E.02 Cost of medium TW frame 2 m to 3m length 0.03393 cum 92130.00 1 cum 3125.97
MAT-00846 BMT - E.01 Cost of medium TW frame up to 2 m length 0.0130 cum 81950.00 1 cum 1065.35
MAT-01064 BMT-I.13 Cost of 4 mm thick pin headed glass 0.60 sqm 370.00 1 sqm 222.00
Cost of TW beading 3.20 RM 21.58 1 RM 69.06
MAT-01345 BMT-N-16 Cost of 30 mm thick flush shutter 1.845 sqm 1400.00 1 sqm 2583.00
MAT-01208 BMT-L.24 Cost of 1mm thick mat finish laminated sheet 3.69 sqm 400.00 1 sqm 1476.00
Labour charges for fixing laminated sheet 100.00
MAT-01639 BMT-W.69 Cost of MS Z hold fasts 6 Nos. 39.00 Each 234.00
MAT-00914 BMT-G.09 Cost of Aluminium tower bolt 200mm long 1 No. 108.00 Each 108.00
MAT-00931 BMT-G.26 Cost of Aluminium butt hinges 150mm long 3 Nos. 133.00 Each 399.00
MAT-00947 BMT-G.42 Cost of Aluminium aldrop 300mm long 1 No. 338.00 Each 338.00
MAT-00939 BMT-G.34 Cost of Aluminium handle 150mm long 2 Nos. 114.00 Each 228.00
Joinery data 2021-22 - Page : 638
MAT-00962 BMT-G.57 Cost of Aluminium door stopper 1 No. 58.00 Each 58.00
MAT-01640 BMT-W.70 Cost of Rubber / Nylon door stop bushes 1 No. 11.00 Each 11.00
Cost of 10mm MS square bars 1.57 Kgs 62000.00 1000 Kgs 97.34
Labour charges for frame work 0.0469 cum 15363.90 1 cum 721.03
Add for MAA @ 20% 0.20 721.03 144.21
LAB-00429 BMM-V.23 Labour charges for fixing flush door shutter to the frame , fixing the
fixtures to the shutter 1.845 sqm 421.00 1 sqm 776.75
Add for MAA @ 20% 0.20 776.75 155.35
LAB-00430 BMM-V.24 Labour charges for fixing glass 0.60 sqm 315.00 1 sqm 189.00
Add for MAA @ 20% 0.20 189.00 37.80
Add for nails & screws etc. 0.72
Rate for 2.60 sqm 12139.56
Overheads&Contractors Profit @13.615% 0.13615 12139.56 1652.80
13792.37
Rate for 1 sqm 5304.76
Say 5305
12 Supply and fixing of doors as per approved drawings with medium teak wood frame of section 100mm x 65 mm with split type fan light
of 500mm at the top fixed with 4mm thick pin headed glass using 12mm x 12mm Teak Wood beading and 2 Nos. of 10mm MS Square bars
and ISI marked flush door shutter of 30mm thick single shutter with bond wood solid block board type core having cross bands and face
veneers, hot pressed bonded with water proof phenol formaldehyde synthetic resin factory made conforming to IS 2202-1991 (Part-I) both
sides commercial ply with internal lipping on all sides including cost and conveyance to site of teak wood frame, flush shutter including
supply and fixing
6 Nos. MS Z hold fasts of size 300 mm x 40 mm x 5mm including cost of ISI marked Aluminium fixtures of 3 Nos. butt hinges (IS:205) 150mm
long , 1 No. aldrop (IS:2681) 300mm long, 1 No. tower bolt (IS:204) of 200 mm x 10 mm dia at top, 2 Nos. 150mm long handles (IS:208), 1
No. door stopper and 1 No. Rubber / Nylon door stop bushes including fixing the fixtures to door with required number of screws, bolt and
nuts including labour charges for fixing the frame in position, fixing the shutter to the frame, fixing glass in fan light portion etc, including
overheads & contractors profit complete for finished item of work as per APSS 1001 & 1002 (The vertical frame of door shall be embedded in
flooring for a depth of not less than 10 mm) (900mm x 2600mm)
(BLD-CSTN-13-16)
Size : 0.90m x 2.60m 2.34 sqm
Quantity analysis
Outer frame - Vertical 2 x 2.61
= 5.22 x 0.10 x 0.065 0.03393 cum
Outer frame - Horizontal 2 x 0.90
= 1.80 x 0.10 x 0.065 0.01170 cum
0.04563 cum
6 Nos. MS Z hold fasts of size 300 mm x 40 mm x 5mm including cost of ISI marked Aluminium fixtures of 3 Nos. butt hinges (IS:205) 150mm
long , 1 No. aldrop (IS:2681) 300mm long, 1 No. tower bolt (IS:204) of 200 mm x 10 mm dia at top, 2 Nos. 150mm long handles (IS:208), 1
No. door stopper and 1 No. Rubber / Nylon door stop bushes including fixing the fixtures to door with required number of screws, bolt and
nuts including labour charges for fixing the frame in position, fixing the shutter to the frame, fixing glass in fan light portion etc, including
overheads & contractors profit complete for finished item of work as per APSS 1001 & 1002 (The vertical frame of door shall be embedded in
flooring for a depth of not less than 10 mm) (900mm x 2600mm)
(BLD-CSTN-13-16)
Size : 0.90m x 2.60m 2.34 sqm
Quantity analysis
Outer frame - Vertical 2 x 2.61
= 5.22 x 0.10 x 0.065 0.03393 cum
Outer frame - Horizontal 2 x 0.90
= 1.80 x 0.10 x 0.065 0.01170 cum
0.04563 cum
Cost analysis
MAT-00847 BMT - E.02 Cost of medium TW frame 2 m to 3m length 0.03393 cum 92130.00 1 cum 3125.97
MAT-00846 BMT - E.01 Cost of medium TW frame up to 2 m length 0.0117 cum 81950.00 1 cum 958.82
MAT-01064 BMT-I.13 Cost of 4 mm thick pin headed glass 0.54 sqm 370.00 1 sqm 199.80
Cost of TW beading 3.00 RM 21.58 1 RM 64.74
MAT-01345 BMT-N-16 Cost of 30 mm thick flush shutter 1.640 sqm 1400.00 1 sqm 2296.00
MAT-01208 BMT-L.24 Cost of 1mm thick mat finish laminated sheet 3.28 sqm 400.00 1 sqm 1312.00
Labour charges for fixing laminated sheet 100.00
MAT-01639 BMT-W.69 Cost of MS Z hold fasts 6 Nos. 39.00 Each 234.00
MAT-00914 BMT-G.09 Cost of Aluminium tower bolt 200mm long 1 No. 108.00 Each 108.00
MAT-00931 BMT-G.26 Cost of Aluminium butt hinges 150mm long 3 Nos. 133.00 Each 399.00
MAT-00947 BMT-G.42 Cost of Aluminium aldrop 300mm long 1 No. 338.00 Each 338.00
MAT-00939 BMT-G.34 Cost of Aluminium handle 150mm long 2 Nos. 114.00 Each 228.00
MAT-00962 BMT-G.57 Cost of Aluminium door stopper 1 No. 58.00 Each 58.00
Joinery data 2021-22 - Page : 642
MAT-01640 BMT-W.70 Cost of Rubber / Nylon door stop bushes 1 No. 11.00 Each 11.00
Cost of 10mm MS square bars 1.413 Kgs 62000.00 1000 Kgs 87.61
Labour charges for frame work 0.0456 cum 15363.90 1 cum 701.05
Add for MAA @ 20% 0.20 701.05 140.21
LAB-00429 BMM-V.23 Labour charges for fixing flush door shutter to the frame , fixing the
fixtures to the shutter 1.640 sqm 421.00 1 sqm 690.44
Add for MAA @ 20% 0.20 690.44 138.09
LAB-00430 BMM-V.24 Labour charges for fixing glass 0.54 sqm 315.00 1 sqm 170.10
Add for MAA @ 20% 0.20 170.10 34.02
Add for nails & screws etc. 1.24
Rate for 2.34 sqm 11396.09
Overheads&Contractors Profit @13.615% 0.13615 11396.09 1551.58
12947.66
Rate for 1 sqm 5533.19
Say 5533
14 Supply and fixing doors as per drawings with medium teak wood frame of section 100mm x 65 mm and ISI marked flush door shutters of
30 mm thick double shutters with bond wood solid block board type Core having cross bands and face veneers, hot pressed bonded with
water proof phenol formaldehyde synthetic resin factory made conforming to IS 2202-1991 (Part-I) both sides commercial ply with internal
lipping on all sides including cost and conveyance to site of teak wood frame, flush shutter including
supply and fixing 6 Nos. MS Z hold fasts of size 300 mm x 40 mm x 5mm including cost of ISI marked Aluminium fixtures of 6 Nos. butt
hinges (IS:205) 150mm long, 1 No. aldrop (IS:2681) 300mm long, 2 Nos. tower bolts (IS:204) of 200 mm x 10 mm dia at top, 2 Nos. 150 mm
long handles (IS:208), 2 Nos. door stoppers and 2 Nos. Rubber / Nylon door stop bushes including fixing the fixtures to door with required
number of screws, bolt and nuts including labour charges for fixing the frame in position, fixing the shutter to the frame etc, including
overheads & contractors profit complete for finished item of work as per APSS 1001 & 1002 (The vertical frame of door shall be embedded in
flooring for a depth of not less than 10 mm) (2000mm x 2100mm)
(BLD-CSTN-13-16)
Size : 2.00m x 2.10m 4.20 Sqm
Quantity analysis
Outer frame - Vertical 2 x 2.11
= 4.22 x 0.10 x 0.065 0.02743 cum
Outer frame - Horizontal 1 x 2.00
= 2.00 x 0.10 x 0.065 0.01300 cum
0.04043 cum
MAT-00847 BMT - E.02 Cost of medium TW frame 2 m to 3m length 0.02743 cum 92130.00 1 cum 2527.13
MAT-00846 BMT - E.01 Cost of medium TW frame up to 2 m length 0.01300 cum 81950.00 1 cum 1065.35
MAT-01345 BMT-N-16 Cost of 30 mm thick flush shutter 3.895 sqm 1400.00 1 sqm 5453.00
Joinery data 2021-22 - Page : 643
MAT-01639 BMT-W.69 Cost of MS Z hold fasts 6 Nos. 39.00 Each 234.00
MAT-00914 BMT-G.09 Cost of Aluminium tower bolt 200mm long 2 Nos. 108.00 Each 216.00
MAT-00931 BMT-G.26 Cost of Aluminium butt hinges 150mm long 6 Nos. 133.00 Each 798.00
MAT-00947 BMT-G.42 Cost of Aluminium aldrop 300mm long 1 No. 338.00 Each 338.00
MAT-00939 BMT-G.34 Cost of Aluminium handle 150mm long 2 Nos. 114.00 Each 228.00
MAT-00962 BMT-G.57 Cost of Aluminium door stopper 2 Nos. 58.00 Each 116.00
MAT-01640 BMT-W.70 Cost of Rubber / Nylon door stop bushes 2 Nos. 11.00 Each 22.00
Labour charges for frame work 0.04043 cum 15363.90 1 cum 621.16
Add for MAA @ 20% 0.20 621.16 124.23
Labour charges for fixing flush door shutter to the frame , fixing the
LAB-00429 BMM-V.23
fixtures to the shutter 3.895 sqm 421.00 1 sqm 1639.80
Add for MAA @ 20% 0.20 1639.80 327.96
Add for nails & screws etc. 2.52
Rate for 4.20 sqm 13713.14
Rate for 1 sqm 3265.03
Overheads&Contractors Profit @13.615% 0.13615 3265.03 444.53
Rate for 1 sqm 3709.57
Say 3710
15 Supply and fixing doors as per drawings with medium teak wood frame of section 100mm x 65 mm and ISI marked flush door shutters of
30 mm thick double shutters with bond wood solid block board type Core having cross bands and face veneers, hot pressed bonded with
water proof phenol formaldehyde synthetic resin factory made conforming to IS 2202-1991 (Part-I) both sides commercial ply with internal
lipping on all sides, fixing 1mm thick mat finish laminated sheet to full width and height of the flush shutter both sides including cost
and conveyance to site of teak wood frame, flush shutter, laminate sheet including
supply and fixing 6 Nos. MS Z hold fasts of size 300 mm x 40 mm x 5mm including cost of ISI marked Aluminium fixtures of 6 Nos. butt
hinges (IS:205) 150mm long, 1 No. aldrop (IS:2681) 300mm long, 2 Nos. tower bolts (IS:204) of 200 mm x 10 mm dia at top, 2 Nos. 150 mm
long handles (IS:208), 2 Nos. door stoppers and 2 Nos. Rubber / Nylon door stop bushes including fixing the fixtures to door with required
number of screws, bolt and nuts including labour charges for fixing the frame in position, fixing the shutter to the frame etc, including
overheads & contractors profit complete for finished item of work as per APSS 1001 & 1002 (The vertical frame of door shall be embedded in
flooring for a depth of not less than 10 mm) (2000mm x 2100mm)
(BLD-CSTN-13-16)
Size : 2.00m x 2.10m 4.20 Sqm
Quantity analysis
Outer frame - Vertical 2 x 2.11
= 4.22 x 0.10 x 0.065 0.02743 cum
Outer frame - Horizontal 1 x 2.00
= 2.00 x 0.10 x 0.065 0.01300 cum
0.04043 cum
16 Supply and fixing doors as per drawings with medium teak wood frame of section 100mm x 65 mm and ISI marked flush door shutters of
30 mm thick double shutters with bond wood solid block board type Core having cross bands and face veneers, hot pressed bonded with
water proof phenol formaldehyde synthetic resin factory made conforming to IS 2202-1991 (Part-I) both sides commercial ply with internal
lipping on all sides including cost and conveyance to site of teak wood frame, flush shutter including
supply and fixing 6 Nos. MS Z hold fasts of size 300 mm x 40 mm x 5mm including cost of ISI marked Aluminium fixtures of 6 Nos. butt
hinges (IS:205)150mm long, 1 No. aldrop (IS:2681) 300mm long, 2 Nos. tower bolts (IS:204) of 200 mm x 10 mm dia at top, 2 Nos. 150 mm
long handles (IS:208), 2 Nos. door stoppers and 2 Nos. Rubber / Nylon door stop bushes including fixing the fixtures to door with required
number of screws, bolt and nuts including labour charges for fixing the frame in position, fixing the shutter to the frame etc, including
overheads & contractors profit complete for finished item of work as per APSS 1001 & 1002 (The vertical frame of door shall be embedded in
flooring for a depth of not less than 10 mm) (1800mm x 2100mm)
(BLD-CSTN-13-16)
Size : 1.80m x 2.10m 3.78 sqm
Quantity analysis
Outer frame - Vertical 2 x 2.11
= 4.22 x 0.10 x 0.065 0.02743 cum
Outer frame - Horizontal 1 x 1.80
Joinery data 2021-22 - Page : 645
= 1.80 x 0.10 x 0.065 0.01170 cum
0.03913 cum
MAT-00847 BMT - E.02 Cost of medium TW frame 2 m to 3m length 0.0274 cum 92130.00 1 cum 2527.13
MAT-00846 BMT - E.01 Cost of medium TW frame up to 2 m length 0.0117 cum 81950.00 1 cum 958.82
MAT-01345 BMT-N-16 Cost of 30 mm thick flush shutter 3.485 sqm 1400.00 1 sqm 4879.00
MAT-01639 BMT-W.69 Cost of MS Z hold fasts 6 Nos. 39.00 Each 234.00
MAT-00914 BMT-G.09 Cost of Aluminium tower bolt 200mm long 2 Nos. 108.00 Each 216.00
MAT-00931 BMT-G.26 Cost of Aluminium butt hinges 150mm long 6 Nos. 133.00 Each 798.00
MAT-00947 BMT-G.42 Cost of Aluminium aldrop 300mm long 1 No. 338.00 Each 338.00
MAT-00939 BMT-G.34 Cost of Aluminium handle 150mm long 2 Nos. 114.00 Each 228.00
MAT-00962 BMT-G.57 Cost of Aluminium door stopper 2 Nos. 58.00 Each 116.00
MAT-01640 BMT-W.70 Cost of Rubber / Nylon door stop bushes 2 Nos. 11.00 Each 22.00
Labour charges for frame work 0.03913 cum 15363.90 1 cum 601.19
Add for MAA @ 20% 0.20 601.19 120.24
LAB-00429 BMM-V.23 Labour charges for fixing flush door shutter to the frame , fixing the
fixtures to the shutter 3.49 sqm 421.00 1 sqm 1467.19
Add for MAA @ 20% 0.20 1467.19 293.44
Add for nails & screws etc. 3.44
Rate for 3.78 sqm 12802.43
Rate for 1 sqm 3386.89
Overheads&Contractors Profit @13.615% 0.13615 3386.89 461.12
Rate for 1 sqm 3848.01
Say 3848
17 Supply and fixing doors as per drawings with medium teak wood frame of section 100mm x 65 mm and ISI marked flush door shutters of
30 mm thick double shutters with bond wood solid block board type Core having cross bands and face veneers, hot pressed bonded with
water proof phenol formaldehyde synthetic resin factory made conforming to IS 2202-1991 (Part-I) both sides commercial ply with internal
lipping on all sides, fixing 1mm thick mat finish laminated sheet to full width and height of the flush shutter both sides including cost
and conveyance to site of teak wood frame, flush shutter, laminate sheet including
supply and fixing 6 Nos. MS Z hold fasts of size 300 mm x 40 mm x 5mm including cost of ISI marked Aluminium fixtures of 6 Nos. butt
hinges (IS:205)150mm long, 1 No. aldrop (IS:2681) 300mm long, 2 Nos. tower bolts (IS:204) of 200 mm x 10 mm dia at top, 2 Nos. 150 mm
long handles (IS:208), 2 Nos. door stoppers and 2 Nos. Rubber / Nylon door stop bushes including fixing the fixtures to door with required
number of screws, bolt and nuts including labour charges for fixing the frame in position, fixing the shutter to the frame etc, including
overheads & contractors profit complete for finished item of work as per APSS 1001 & 1002 (The vertical frame of door shall be embedded in
flooring for a depth of not less than 10 mm) (1800mm x 2100mm)
(BLD-CSTN-13-16)
Size : 1.80m x 2.10m 3.78 sqm
Joinery data 2021-22 - Page : 646
Quantity analysis
Outer frame - Vertical 2 x 2.11
= 4.22 x 0.10 x 0.065 0.02743 cum
Outer frame - Horizontal 1 x 1.80
= 1.80 x 0.10 x 0.065 0.01170 cum
0.03913 cum
MAT-00847 BMT - E.02 Cost of medium TW frame 2 m to 3m length 0.0274 cum 92130.00 1 cum 2527.13
MAT-00846 BMT - E.01 Cost of medium TW frame up to 2 m length 0.0117 cum 81950.00 1 cum 958.82
MAT-01345 BMT-N-16 Cost of 30 mm thick flush shutter 3.485 sqm 1400.00 1 sqm 4879.00
MAT-01208 BMT-L.24 Cost of 1mm thick mat finish laminated sheet 6.97 sqm 400.00 1 sqm 2788.00
Labour charges for fixing laminated sheet 100.00
MAT-01639 BMT-W.69 Cost of MS Z hold fasts 6 Nos. 39.00 Each 234.00
MAT-00914 BMT-G.09 Cost of Aluminium tower bolt 200mm long 2 Nos. 108.00 Each 216.00
MAT-00931 BMT-G.26 Cost of Aluminium butt hinges 150mm long 6 Nos. 133.00 Each 798.00
MAT-00947 BMT-G.42 Cost of Aluminium aldrop 300mm long 1 No. 338.00 Each 338.00
MAT-00939 BMT-G.34 Cost of Aluminium handle 150mm long 2 Nos. 114.00 Each 228.00
MAT-00962 BMT-G.57 Cost of Aluminium door stopper 2 Nos. 58.00 Each 116.00
MAT-01640 BMT-W.70 Cost of Rubber / Nylon door stop bushes 2 Nos. 11.00 Each 22.00
Labour charges for frame work 0.03913 cum 15363.90 1 cum 601.19
Add for MAA @ 20% 0.20 601.19 120.24
Labour charges for fixing flush door shutter to the frame , fixing the
LAB-00429 BMM-V.23
fixtures to the shutter 3.49 sqm 421.00 1 sqm 1467.19
Add for MAA @ 20% 0.20 1467.19 293.44
Add for nails & screws etc. 4.54
Rate for 3.78 sqm 15691.53
Rate for 1 sqm 4151.20
Overheads&Contractors Profit @13.615% 0.13615 4151.20 565.19
Rate for 1 sqm 4716.38
Say 4716
18 Supply and fixing doors as per drawings with medium teak wood frame of section 100mm x 65 mm and ISI marked flush door shutters of
30 mm thick double shutters with bond wood solid block board type Core having cross bands and face veneers, hot pressed bonded with
water proof phenol formaldehyde synthetic resin factory made conforming to IS 2202-1991 (Part-I) both sides commercial ply with internal
lipping on all sides including cost and conveyance to site of teak wood frame, flush shutter including
Joinery data 2021-22 - Page : 647
supply and fixing 6 Nos. MS Z hold fasts of size 300 mm x 40 mm x 5mm including cost of ISI marked Aluminium fixtures of 6 Nos. butt
hinges (IS:205) 150mm long, 1 No. aldrop (IS:2681) 300mm long, 2 Nos. tower bolts (IS:204) of 200 mm x 10 mm dia at top, 2 Nos. 150 mm
long handles (IS:208), 2 Nos. door stoppers and 2 Nos. Rubber / Nylon door stop bushes including fixing the fixtures to door with required
number of screws, bolt and nuts including labour charges for fixing the frame in position, fixing the shutter to the frame etc., including
overheads & contractors profit complete for finished item of work as per APSS 1001 & 1002 (The vertical frame of door shall be embedded in
flooring for a depth of not less than 10 mm) (1500mm x 2100mm)
(BLD-CSTN-13-16)
Size : 1.50m x 2.10m 3.15 sqm
Quantity analysis
Outer frame - Vertical 2 x 2.11
= 4.22 x 0.10 x 0.065 0.02743 cum
Outer frame - Horizontal 1 x 1.50
= 1.50 x 0.10 x 0.065 0.00975 cum
0.03718 cum
19 Supply and fixing doors as per drawings with medium teak wood frame of section 100mm x 65 mm and ISI marked flush door shutters of
30 mm thick double shutters with bond wood solid block board type Core having cross bands and face veneers, hot pressed bonded with
water proof phenol formaldehyde synthetic resin factory made conforming to IS 2202-1991 (Part-I) both sides commercial ply with internal
lipping on all sides, fixing 1mm thick mat finish laminated sheet to full width and height of the flush shutter both sides including cost
and conveyance to site of teak wood frame, flush shutter, laminate sheet including
supply and fixing 6 Nos. MS Z hold fasts of size 300 mm x 40 mm x 5mm including cost of ISI marked Aluminium fixtures of 6 Nos. butt
hinges (IS:205) 150mm long, 1 No. aldrop (IS:2681) 300mm long, 2 Nos. tower bolts (IS:204) of 200 mm x 10 mm dia at top, 2 Nos. 150 mm
long handles (IS:208), 2 Nos. door stoppers and 2 Nos. Rubber / Nylon door stop bushes including fixing the fixtures to door with required
number of screws, bolt and nuts including labour charges for fixing the frame in position, fixing the shutter to the frame etc., including
overheads & contractors profit complete for finished item of work as per APSS 1001 & 1002 (The vertical frame of door shall be embedded in
flooring for a depth of not less than 10 mm) (1500mm x 2100mm)
(BLD-CSTN-13-16)
Size : 1.50m x 2.10m 3.15 sqm
Quantity analysis
Outer frame - Vertical 2 x 2.11
= 4.22 x 0.10 x 0.065 0.02743 cum
Outer frame - Horizontal 1 x 1.50
= 1.50 x 0.10 x 0.065 0.00975 cum
Joinery data 2021-22 - Page : 649
0.03718 cum
MAT-00847 BMT - E.02 Cost of medium TW frame 2 m to 3m length 0.02743 cum 92130.00 1 cum 2527.13
MAT-00846 BMT - E.01 Cost of medium TW frame up to 2 m length 0.00975 cum 81950.00 1 cum 799.01
MAT-01345 BMT-N-16 Cost of 30 mm thick flush shutter 2.87 sqm 1400.00 1 sqm 4018.00
MAT-01208 BMT-L.24 Cost of 1mm thick mat finish laminated sheet 5.74 sqm 400.00 1 sqm 2296.00
Labour charges for fixing laminated sheet 100.00
MAT-01639 BMT-W.69 Cost of MS Z hold fasts 6 Nos. 39.00 Each 234.00
MAT-00914 BMT-G.09 Cost of Aluminium tower bolt 200mm long 2 Nos. 108.00 Each 216.00
MAT-00931 BMT-G.26 Cost of Aluminium butt hinges 150mm long 6 Nos. 133.00 Each 798.00
MAT-00947 BMT-G.42 Cost of Aluminium aldrop 300mm long 1 No. 338.00 Each 338.00
MAT-00939 BMT-G.34 Cost of Aluminium handle 150mm long 2 Nos. 114.00 Each 228.00
MAT-00962 BMT-G.57 Cost of Aluminium door stopper 2 Nos. 58.00 Each 116.00
MAT-01640 BMT-W.70 Cost of Rubber / Nylon door stop bushes 2 Nos. 11.00 Each 22.00
Labour charges for frame work 0.03718 cum 15363.90 1 cum 571.23
Add for MAA @ 20% 0.20 571.23 114.25
LAB-00429 BMM-V.23 Labour charges for fixing flush door shutter to the frame , fixing the
fixtures to the shutter 2.87 sqm 421.00 1 sqm 1208.27
Add for MAA @ 20% 0.20 1208.27 241.65
Add for nails & screws etc. 3.50
Rate for 3.15 sqm 13831.04
Rate for 1 sqm 4390.81
Overheads&Contractors Profit @13.615% 0.13615 4390.81 597.81
Rate for 1 sqm 4988.61
Say 4989
20 Supply and fixing doors as per drawings with medium teak wood frame of section 100mm x 65 mm and ISI marked flush door shutters of
30 mm thick double shutters with bond wood solid block board type Core having cross bands and face veneers, hot pressed bonded with
water proof phenol formaldehyde synthetic resin factory made conforming to IS 2202-1991 (Part-I) both sides commercial ply with internal
lipping on all sides including cost and conveyance to site of teak wood frame, flush shutter including
supply and fixing 6 Nos. MS Z hold fasts of size 300 mm x 40 mm x 5mm including cost of ISI marked Alumium fixtures of 6 Nos. butt hinges
(IS:205) 150mm long, 1 No. aldrop (IS:2681) 300mm long, 2 Nos. tower bolts (IS:204) of 200 mm x 10 mm dia at top, 2 Nos. 150 mm long
handles (IS:208), 2 Nos. door stoppers and 2 Nos. Rubber / Nylon door stop bushes including fixing the fixtures to door with required
number of screws, bolt and nuts including labour charges for fixing the frame in position, fixing the shutter to the frame etc., including
overheads & contractors profit complete for finished item of work as per APSS 1001 & 1002 (The vertical frame of door shall be embedded in
flooring for a depth of not less than 10 mm) (1200mm x 2100mm)
(BLD-CSTN-13-16)
Size : 1.20m x 2.10m 2.52 sqm
Joinery data 2021-22 - Page : 650
Quantity analysis
Outer frame - Vertical 2 x 2.11
= 4.22 x 0.10 x 0.065 0.02743 cum
Outer frame - Horizontal 1 x 1.20
= 1.20 x 0.10 x 0.065 0.00780 cum
0.03523 cum
MAT-00847 BMT - E.02 Cost of medium TW frame 2 m to 3m length 0.0274 cum 92130.00 1 cum 2527.13
MAT-00846 BMT - E.01 Cost of medium TW frame below 2 m length 0.0078 cum 81950.00 1 cum 639.21
MAT-01345 BMT-N-16 Cost of 30 mm thick flush shutter 2.255 sqm 1400.00 1 sqm 3157.00
MAT-01639 BMT-W.69 Cost of MS Z hold fasts 6 Nos. 39.00 Each 234.00
MAT-00914 BMT-G.09 Cost of Aluminium tower bolt 200mm long 2 Nos. 108.00 Each 216.00
MAT-00931 BMT-G.26 Cost of Aluminium butt hinges 150mm long 6 Nos. 133.00 Each 798.00
MAT-00947 BMT-G.42 Cost of Aluminium aldrop 300mm long 1 No. 338.00 Each 338.00
MAT-00939 BMT-G.34 Cost of Aluminium handle 150mm long 2 Nos. 114.00 Each 228.00
MAT-00962 BMT-G.57 Cost of Aluminium door stopper 2 Nos. 58.00 Each 116.00
MAT-01640 BMT-W.70 Cost of Rubber / Nylon door stop bushes 2 Nos. 11.00 Each 22.00
Labour charges for frame work 0.035 cum 15363.90 1 cum 541.27
Add for MAA @ 20% 0.20 541.27 108.25
Labour charges for fixing flush door shutter to the frame , fixing the
LAB-00429 BMM-V.23
fixtures to the shutter 2.255 sqm 421.00 1 sqm 949.36
Add for MAA @ 20% 0.20 949.36 189.87
Add for nails & screws etc. 1.17
Rate for 2.52 sqm 10065.26
Rate for 1 sqm 3994.15
Overheads&Contractors Profit @13.615% 0.13615 3994.15 543.80
Rate for 1 sqm 4537.95
Say 4538
Joinery data 2021-22 - Page : 651
21 Supply and fixing doors as per drawings with medium teak wood frame of section 100mm x 65 mm and ISI marked flush door shutters of
30 mm thick double shutters with bond wood solid block board type Core having cross bands and face veneers, hot pressed bonded with
water proof phenol formaldehyde synthetic resin factory made conforming to IS 2202-1991 (Part-I) both sides commercial ply with internal
lipping on all sides, fixing 1mm thick mat finish laminated sheet to full width and height of the flush shutter both sides including cost
and conveyance to site of teak wood frame, flush shutter, laminate sheet including
supply and fixing 6 Nos. MS Z hold fasts of size 300 mm x 40 mm x 5mm including cost of ISI marked Alumium fixtures of 6 Nos. butt hinges
(IS:205) 150mm long, 1 No. aldrop (IS:2681) 300mm long, 2 Nos. tower bolts (IS:204) of 200 mm x 10 mm dia at top, 2 Nos. 150 mm long
handles (IS:208), 2 Nos. door stoppers and 2 Nos. Rubber / Nylon door stop bushes including fixing the fixtures to door with required
number of screws, bolt and nuts including labour charges for fixing the frame in position, fixing the shutter to the frame etc., including
overheads & contractors profit complete for finished item of work as per APSS 1001 & 1002 (The vertical frame of door shall be embedded in
flooring for a depth of not less than 10 mm) (1200mm x 2100mm)
(BLD-CSTN-13-16)
Size : 1.20m x 2.10m 2.52 sqm
Quantity analysis
Outer frame - Vertical 2 x 2.11
= 4.22 x 0.10 x 0.065 0.02743 cum
Outer frame - Horizontal 1 x 1.20
= 1.20 x 0.10 x 0.065 0.00780 cum
0.03523 cum
MAT-00847 BMT - E.02 Cost of medium TW frame 2 m to 3m length 0.0274 cum 92130.00 1 cum 2527.13
MAT-00846 BMT - E.01 Cost of medium TW frame below 2 m length 0.0078 cum 81950.00 1 cum 639.21
MAT-01345 BMT-N-16 Cost of 30 mm thick flush shutter 2.255 sqm 1400.00 1 sqm 3157.00
MAT-01208 BMT-L.24 Cost of 1mm thick mat finish laminated sheet 4.51 sqm 400.00 1 sqm 1804.00
Labour charges for fixing laminated sheet 100.00
MAT-01639 BMT-W.69 Cost of MS Z hold fasts 6 Nos. 39.00 Each 234.00
MAT-00914 BMT-G.09 Cost of Aluminium tower bolt 200mm long 2 Nos. 108.00 Each 216.00
MAT-00931 BMT-G.26 Cost of Aluminium butt hinges 150mm long 6 Nos. 133.00 Each 798.00
MAT-00947 BMT-G.42 Cost of Aluminium aldrop 300mm long 1 No. 338.00 Each 338.00
MAT-00939 BMT-G.34 Cost of Aluminium handle 150mm long 2 Nos. 114.00 Each 228.00
MAT-00962 BMT-G.57 Cost of Aluminium door stopper 2 Nos. 58.00 Each 116.00
MAT-01640 BMT-W.70 Cost of Rubber / Nylon door stop bushes 2 Nos. 11.00 Each 22.00
Labour charges for frame work 0.035 cum 15363.90 1 cum 541.27
Add for MAA @ 20% 0.20 541.27 108.25
Labour charges for fixing flush door shutter to the frame , fixing the
LAB-00429 BMM-V.23
fixtures to the shutter 2.255 sqm 421.00 1 sqm 949.36
Add for MAA @ 20% 0.20 949.36 189.87
Add for nails & screws etc. 2.47
Joinery data 2021-22 - Page : 652
Rate for 2.52 sqm 11970.56
Rate for 1 sqm 4750.22
Overheads&Contractors Profit @13.615% 0.13615 4750.22 646.74
Rate for 1 sqm 5396.96
Say 5397
22 Supply and fixing doors as per drawings with medium teak wood frame of section 100mm x 65 mm and ISI marked flush door shutters of
30 mm thick single shutter with bond wood solid block board type Core having cross bands and face veneers, hot pressed bonded with
water proof phenol formaldehyde synthetic resin factory made conforming to IS 2202-1991 (Part-I) both sides commercial ply with internal
lipping on all sides including cost and conveyance to site of teak wood frame, flush shutter including supply and
fixing 6 Nos. MS Z hold fasts of size 300 mm x 40 mm x 5mm including cost of ISI marked Aluminium fixtures of 3 Nos. butt hinges (IS:205)
150mm long, 1 No. aldrop (IS:2681) 300mm long, 1 No. tower bolt (IS:204) of 200 mm x 10 mm dia at top , 2 Nos. 150 mm long handles
(IS:208), 1 No. door stopper and 1 No. Rubber / Nylon door stop bushes including fixing the fixtures to door with required number of screws,
bolt and nuts including labour charges for fixing the frame in position, fixing the shutter to the frame etc., including overheads & contractors
profit complete for finished item of work as per APSS 1001 & 1002 (The vertical frame of door shall be embedded in flooring for a depth of not
less than 10 mm) (1000mm x 2100mm)
(BLD-CSTN-13-16)
Size : 1.00m x 2.10m 2.10 sqm
Quantity analysis
Outer frame - Vertical 2 x 2.11
= 4.22 x 0.10 x 0.065 0.02743 cum
Outer frame - Horizontal 1 x 1.00
= 1.00 x 0.10 x 0.065 0.00650 cum
0.03393 cum
Cost analysis
MAT-00847 BMT - E.02 Cost of medium TW frame 2 m to 3m length 0.02743 cum 92130.00 1 cum 2527.13
MAT-00846 BMT - E.01 Cost of medium TW frame up to 2 m length 0.00650 cum 81950.00 1 cum 532.68
MAT-01345 BMT-N-16 Cost of 30 mm thick flush shutter 1.845 sqm 1400.00 1 sqm 2583.00
MAT-01639 BMT-W.69 Cost of MS Z hold fasts 6 Nos. 39.00 Each 234.00
MAT-00914 BMT-G.09 Cost of Aluminium tower bolt 200mm long 1 No. 108.00 Each 108.00
MAT-00931 BMT-G.26 Cost of Aluminium butt hinges 150mm long 3 Nos. 133.00 Each 399.00
MAT-00947 BMT-G.42 Cost of Aluminium aldrop 300mm long 1 No. 338.00 Each 338.00
MAT-00939 BMT-G.34 Cost of Aluminium handle 150mm long 2 Nos. 114.00 Each 228.00
MAT-00962 BMT-G.57 Cost of Aluminium door stopper 1 No. 58.00 Each 58.00
MAT-01640 BMT-W.70 Cost of Rubber / Nylon door stop bushes 1 No. 11.00 Each 11.00
Labour charges for frame work 0.0339 cum 15363.90 1 cum 521.30
Add for MAA @ 20% 0.20 521.30 104.26
Joinery data 2021-22 - Page : 653
Labour charges for fixing flush door shutter to the frame , fixing the
LAB-00429 BMM-V.23
fixtures to the shutter 1.845 sqm 421.00 1 sqm 776.75
Add for MAA @ 20% 0.20 776.75 155.35
Add for nails & screws etc. 2.09
Rate for 2.10 sqm 8578.54
Overheads&Contractors Profit @13.615% 0.13615 8578.54 1167.97
9746.51
Rate for 1 sqm 4641.20
Say 4641
23 Supply and fixing doors as per drawings with medium teak wood frame of section 100mm x 65 mm and ISI marked flush door shutters of
30 mm thick single shutter with bond wood solid block board type Core having cross bands and face veneers, hot pressed bonded with
water proof phenol formaldehyde synthetic resin factory made conforming to IS 2202-1991 (Part-I) both sides commercial ply with internal
lipping on all sides, fixing 1mm thick mat finish laminated sheet to full width and height of the flush shutter both sides including cost
and conveyance to site of teak wood frame, flush shutter, laminated sheet including supply and
fixing 6 Nos. MS Z hold fasts of size 300 mm x 40 mm x 5mm including cost of ISI marked Aluminium fixtures of 3 Nos. butt hinges (IS:205)
150mm long, 1 No. aldrop (IS:2681) 300mm long, 1 No. tower bolt (IS:204) of 200 mm x 10 mm dia at top , 2 Nos. 150 mm long handles
(IS:208), 1 No. door stopper and 1 No. Rubber / Nylon door stop bushes including fixing the fixtures to door with required number of screws,
bolt and nuts including labour charges for fixing the frame in position, fixing the shutter to the frame etc., including overheads & contractors
profit complete for finished item of work as per APSS 1001 & 1002 (The vertical frame of door shall be embedded in flooring for a depth of not
less than 10 mm) (1000mm x 2100mm)
(BLD-CSTN-13-16)
Size : 1.00m x 2.10m 2.10 sqm
Quantity analysis
Outer frame - Vertical 2 x 2.11
= 4.22 x 0.10 x 0.065 0.02743 cum
Outer frame - Horizontal 1 x 1.00
= 1.00 x 0.10 x 0.065 0.00650 cum
0.03393 cum
Cost analysis
MAT-00847 BMT - E.02 Cost of medium TW frame 2 m to 3m length 0.02743 cum 92130.00 1 cum 2527.13
MAT-00846 BMT - E.01 Cost of medium TW frame up to 2 m length 0.00650 cum 81950.00 1 cum 532.68
MAT-01345 BMT-N-16 Cost of 30 mm thick flush shutter 1.845 sqm 1400.00 1 sqm 2583.00
MAT-01208 BMT-L.24 Cost of 1mm thick mat finish laminated sheet 3.69 sqm 400.00 1 sqm 1476.00
Labour charges for fixing laminated sheet 100.00
MAT-01639 BMT-W.69 Cost of MS Z hold fasts 6 Nos. 39.00 Each 234.00
MAT-00914 BMT-G.09 Cost of Aluminium tower bolt 200mm long 1 No. 108.00 Each 108.00
Joinery data 2021-22 - Page : 654
MAT-00931 BMT-G.26 Cost of Aluminium butt hinges 150mm long 3 Nos. 133.00 Each 399.00
MAT-00947 BMT-G.42 Cost of Aluminium aldrop 300mm long 1 No. 338.00 Each 338.00
MAT-00939 BMT-G.34 Cost of Aluminium handle 150mm long 2 Nos. 114.00 Each 228.00
MAT-00962 BMT-G.57 Cost of Aluminium door stopper 1 No. 58.00 Each 58.00
MAT-01640 BMT-W.70 Cost of Rubber / Nylon door stop bushes 1 No. 11.00 Each 11.00
Labour charges for frame work 0.0339 cum 15363.90 1 cum 521.30
Add for MAA @ 20% 0.20 521.30 104.26
LAB-00429 BMM-V.23 Labour charges for fixing flush door shutter to the frame , fixing the
fixtures to the shutter 1.845 sqm 421.00 1 sqm 776.75
Add for MAA @ 20% 0.20 776.75 155.35
Add for nails & screws etc. 1.79
Rate for 2.10 sqm 10154.24
Overheads&Contractors Profit @13.615% 0.13615 10154.24 1382.50
11536.74
Rate for 1 sqm 5493.69
Say 5494
24 Supply and fixing doors as per drawings with medium teak wood frame of section 100mm x 65 mm and ISI marked flush door shutters of
30 mm thick single shutter with bond wood solid block board type Core having cross bands and face veneers, hot pressed bonded with
water proof phenol formaldehyde synthetic resin factory made conforming to IS 2202-1991 (Part-I) both sides commercial ply with internal
lipping on all sides including cost and conveyance to site of teak wood frame, flush shutter including supply and
fixing 6 Nos. MS Z hold fasts of size 300 mm x 40 mm x 5mm including cost of ISI marked Aluminium fixtures of 3 Nos. butt hinges (IS:205)
150mm long, 1 No. aldrop (IS:2681) 300mm long, 1 No. tower bolt (IS:204) of 200 mm x 10 mm dia at top, 2 Nos. 150 mm long handles
(IS:208), 1 No. door stopper and 1 No. Rubber / Nylon door stop bushes including fixing the fixtures to door with required number of screws,
bolt and nuts including labour charges for fixing the frame in position, fixing the shutter to the frame etc, including overheads & contractors
profit complete for finished item of work as per APSS 1001 & 1002 (The vertical frame of door shall be embedded in flooring for a depth of not
less than 10 mm) (900mm x 2100mm)
(BLD-CSTN-13-16)
Size : 0.90m x 2.10m 1.89 sqm
Quantity analysis
Outer frame - Vertical 2 x 2.11
= 4.22 x 0.10 x 0.065 0.02743 cum
Outer frame - Horizontal 1 x 0.90
= 0.90 x 0.10 x 0.065 0.00585 cum
0.03328 cum
Cost analysis
MAT-00847 BMT - E.02 Cost of medium TW frame 2 m to 3m length 0.02743 cum 92130.00 1 cum 2527.13
Joinery data 2021-22 - Page : 655
MAT-00846 BMT - E.01 Cost of medium TW frame up to 2 m length 0.00585 cum 81950.00 1 cum 479.41
MAT-01345 BMT-N-16 Cost of 30 mm thick flush shutter 1.64 sqm 1400.00 1 sqm 2296.00
MAT-01639 BMT-W.69 Cost of MS Z hold fasts 6 Nos. 39.00 Each 234.00
MAT-00914 BMT-G.09 Cost of Aluminium tower bolt 200mm long 1 No. 108.00 Each 108.00
MAT-00931 BMT-G.26 Cost of Aluminium butt hinges 150mm long 3 Nos. 133.00 Each 399.00
MAT-00947 BMT-G.42 Cost of Aluminium aldrop 300mm long 1 No. 338.00 Each 338.00
MAT-00939 BMT-G.34 Cost of Aluminium handle 150mm long 2 Nos. 114.00 Each 228.00
MAT-00962 BMT-G.57 Cost of Aluminium door stopper 1 No. 58.00 Each 58.00
MAT-01640 BMT-W.70 Cost of Rubber / Nylon door stop bushes 1 No. 11.00 Each 11.00
Labour charges for frame work 0.03328 cum 15363.90 1 cum 511.31
Add for MAA @ 20% 0.20 511.31 102.26
Labour charges for fixing flush door shutter to the frame , fixing the
LAB-00429 BMM-V.23
fixtures to the shutter 1.64 sqm 421.00 1 sqm 690.44
Add for MAA @ 20% 0.20 690.44 138.09
Add for nails & screws etc. 0.04
Rate for 1.89 sqm 8120.67
Overheads&Contractors Profit @13.615% 0.13615 8120.67 1105.63
9226.30
Rate for 1 sqm 4881.64
Say 4882
25 Supply and fixing doors as per drawings with medium teak wood frame of section 100mm x 65 mm and ISI marked flush door shutters of
30 mm thick single shutter with bond wood solid block board type Core having cross bands and face veneers, hot pressed bonded with
water proof phenol formaldehyde synthetic resin factory made conforming to IS 2202-1991 (Part-I) both sides commercial ply with internal
lipping on all sides, fixing 1mm thick mat finish laminated sheet to full width and height of the flush shutter both sides including cost
and conveyance to site of teak wood frame, flush shutter, laminate sheet including supply and
fixing 6 Nos. MS Z hold fasts of size 300 mm x 40 mm x 5mm including cost of ISI marked Aluminium fixtures of 3 Nos. butt hinges (IS:205)
150mm long, 1 No. aldrop (IS:2681) 300mm long, 1 No. tower bolt (IS:204) of 200 mm x 10 mm dia at top, 2 Nos. 150 mm long handles
(IS:208), 1 No. door stopper and 1 No. Rubber / Nylon door stop bushes including fixing the fixtures to door with required number of screws,
bolt and nuts including labour charges for fixing the frame in position, fixing the shutter to the frame etc, including overheads & contractors
profit complete for finished item of work as per APSS 1001 & 1002 (The vertical frame of door shall be embedded in flooring for a depth of not
less than 10 mm) (900mm x 2100mm)
(BLD-CSTN-13-16)
Size : 0.90m x 2.10m 1.89 sqm
Quantity analysis
Outer frame - Vertical 2 x 2.11
= 4.22 x 0.10 x 0.065 0.02743 cum
Outer frame - Horizontal 1 x 0.90
= 0.90 x 0.10 x 0.065 0.00585 cum
0.03328 cum
Joinery data 2021-22 - Page : 656
30 mm thick flush shutter 0.80 x 2.05 1.64 sqm
Cost analysis
MAT-00847 BMT - E.02 Cost of medium TW frame 2 m to 3m length 0.02743 cum 92130.00 1 cum 2527.13
MAT-00846 BMT - E.01 Cost of medium TW frame up to 2 m length 0.00585 cum 81950.00 1 cum 479.41
MAT-01345 BMT-N-16 Cost of 30 mm thick flush shutter 1.64 sqm 1400.00 1 sqm 2296.00
MAT-01208 BMT-L.24 Cost of 1mm thick mat finish laminated sheet 3.28 sqm 400.00 1 sqm 1312.00
Labour charges for fixing laminated sheet 100.00
MAT-01639 BMT-W.69 Cost of MS Z hold fasts 6 Nos. 39.00 Each 234.00
MAT-00914 BMT-G.09 Cost of Aluminium tower bolt 200mm long 1 No. 108.00 Each 108.00
MAT-00931 BMT-G.26 Cost of Aluminium butt hinges 150mm long 3 Nos. 133.00 Each 399.00
MAT-00947 BMT-G.42 Cost of Aluminium aldrop 300mm long 1 No. 338.00 Each 338.00
MAT-00939 BMT-G.34 Cost of Aluminium handle 150mm long 2 Nos. 114.00 Each 228.00
MAT-00962 BMT-G.57 Cost of Aluminium door stopper 1 No. 58.00 Each 58.00
MAT-01640 BMT-W.70 Cost of Rubber / Nylon door stop bushes 1 No. 11.00 Each 11.00
Labour charges for frame work 0.03328 cum 15363.90 1 cum 511.31
Add for MAA @ 20% 0.20 511.31 102.26
LAB-00429 BMM-V.23 Labour charges for fixing flush door shutter to the frame , fixing the
fixtures to the shutter 1.64 sqm 421.00 1 sqm 690.44
Add for MAA @ 20% 0.20 690.44 138.09
Add for nails & screws etc. 1.44
Rate for 1.89 sqm 9534.07
Overheads&Contractors Profit @13.615% 0.13615 9534.07 1298.06
10832.14
Rate for 1 sqm 5731.29
Say 5731
26 Supply and fixing doors as per drawings with medium teak wood frame of section 100mm x 65mm and ISI marked flush door shutter of
30mm thick single shutter with bond wood solid block board type Core having cross bands and face veneers, hot pressed bonded with
water proof phenol formaldehyde synthetic resin factory made conforming to IS 2202-1991 (Part-I) both sides commercial ply with internal
lipping on all sides including cost and conveyance to site of medium teak wood door frame, flush shutter, including suply and fixing 6 Nos.
MS Z hold fasts of size 300mm x 40mm x 5mm including ISI marked Aluminium fixtures 3 Nos. butt hinges (IS:205) of 150mm long, 1 No.
aldrop (IS:2681) 250 mm long,
1 No. tower bolt (IS:204) of 150 mm x 10mm dia, 2 Nos. 125mm long handles (IS:208),1 No. Rubber / Nylon door stop bushes including PVC
door cladding 1.50mm thick to the flush doors shutters pasted with Fevicol complete as per direction of Engineer –in – charge,
manufacturers specification and drawing to full height of the shutter inside including labour charges for fixing the frame in position, fixing the
shutter to the frame etc., including overheads & contractors profit complete for finished item of work as per APSS 1001 & 1002. (The vertical
frame of door shall be embedded in flooring for deth of not less than 10mm) (800mm x 2100mm)
(BLD-CSTN-13-16)
Quantity analysis Size : 0.80m x 2.10m 1.68 sqm
Joinery data 2021-22 - Page : 657
Outer frame - Vertical 2 x 2.11
= 4.22 x 0.10 x 0.065 0.02743 cum
Outer frame - Horizontal 1 x 0.80
= 0.80 x 0.10 x 0.065 0.00520 cum
0.03263 cum
Cost analysis
MAT-00847 BMT - E.02 Cost of medium TW frame 2 m to 3m length 0.02743 cum 92130.00 1 cum 2527.13
MAT-00846 BMT - E.01 Cost of medium TW frame up to 2 m length 0.00520 cum 81950.00 1 cum 426.14
MAT-01345 BMT-N-16 Cost of 30 mm thick flush shutter 1.435 sqm 1400.00 1 sqm 2009.00
MAT-01639 BMT-W.69 Cost of MS Z hold fasts 6 Nos. 39.00 Each 234.00
MAT-00913 BMT-G.08 Cost of Aluminium tower bolt 150mm long 1 No. 86.50 Each 86.50
MAT-00913 BMT-G.08 Cost of Aluminium butt hinges 150mm long 3 Nos. 133.00 Each 399.00
MAT-00931 BMT-G.26 Cost of Aluminium aldrop 250mm long 1 No. 314.00 Each 314.00
MAT-00946 BMT-G.41 Cost of Aluminium handle 125mm long 1 No. 102.00 Each 102.00
MAT-00938 BMT-G.33 Cost of Rubber / Nylon door stop bushes 1 No. 11.00 Each 11.00
MAT-01640 BMT-W.70 Labour charges for frame work 0.0326 cum 15363.90 1 cum 501.32
Add for MAA @ 20% 0.20 501.32 100.26
Labour charges for fixing flush door shutter to the frame , fixing the
LAB-00429 BMM-V.23
fixtures to the shutter 1.435 sqm 421.00 1 sqm 604.14
Add for MAA @ 20% 0.20 604.14 120.83
MAT-01339 BMT-N-10 PVC cladding to flush shutters 1.50mm thick 1.435 sqm 413.00 1 sqm 592.66
Add for nails & screws etc. 4.87
Rate for 1.68 sqm 8032.84
Overheads&Contractors Profit @13.615% 0.13615 8032.84 1093.67
9126.51
Rate for 1 sqm 5432.45
Say 5432
27 Supply and fixing doors as per drawings with medium teak wood frame of section 100mm x 65mm and ISI marked flush door shutter of
30mm thick single shutter with bond wood solid block board type Core having cross bands and face veneers, hot pressed bonded with
water proof phenol formaldehyde synthetic resin factory made conforming to IS 2202-1991 (Part-I) both sides commercial ply with internal
lipping on all sides including cost and conveyance to site of medium teak wood door frame, flush shutter, including suply and fixing 6 Nos.
MS Z hold fasts of size 300mm x 40mm x 5mm including ISI marked Aluminium fixtures 3 Nos. butt hinges (IS:205) of 150mm long, 1 No.
aldrop (IS:2681) 250 mm long,
Joinery data 2021-22 - Page : 658
1 No. tower bolt (IS:204) of 150 mm x 10mm dia, 2 Nos. 125mm long handles (IS:208),1 No. Rubber / Nylon door stop bushes including PVC
door cladding 1.50mm thick to the flush doors shutters pasted with Fevicol complete as per direction of Engineer –in – charge,
manufacturers specification and drawing to full height of the shutter inside including labour charges for fixing the frame in position, fixing the
shutter to the frame etc., including overheads & contractors profit complete for finished item of work as per APSS 1001 & 1002. (The vertical
frame of door shall be embedded in flooring for deth of not less than 10mm) (750mm x 2100mm)
(BLD-CSTN-13-16)
Quantity analysis Size : 0.75m x 2.10m 1.575 sqm
Outer frame - Vertical 2 x 2.11
= 4.22 x 0.10 x 0.065 0.02743 cum
Outer frame - Horizontal 1 x 0.75
= 0.75 x 0.10 x 0.065 0.00488 cum
0.03231 cum
Cost analysis
MAT-00847 BMT - E.02 Cost of medium TW frame 2 m to 3m length 0.02743 cum 92130.00 1 cum 2527.13
MAT-00846 BMT - E.01 Cost of medium TW frame up to 2 m length 0.00488 cum 81950.00 1 cum 399.92
MAT-01345 BMT-N-16 Cost of 30 mm thick flush shutter 1.333 sqm 1400.00 1 sqm 1866.20
MAT-01639 BMT-W.69 Cost of MS Z hold fasts 6 Nos. 39.00 Each 234.00
MAT-00913 BMT-G.08 Cost of Aluminium tower bolt 150mm long 1 No. 86.50 Each 86.50
MAT-00913 BMT-G.08 Cost of Aluminium butt hinges 150mm long 3 Nos. 133.00 Each 399.00
MAT-00931 BMT-G.26 Cost of Aluminium aldrop 250mm long 1 No. 314.00 Each 314.00
MAT-00946 BMT-G.41 Cost of Aluminium handle 125mm long 1 No. 102.00 Each 102.00
MAT-00938 BMT-G.33 Cost of Rubber / Nylon door stop bushes 1 No. 11.00 Each 11.00
MAT-01640 BMT-W.70 Labour charges for frame work 0.03231 cum 15363.90 1 cum 496.41
Add for MAA @ 20% 0.20 496.41 99.28
Labour charges for fixing flush door shutter to the frame , fixing the
LAB-00429 BMM-V.23
fixtures to the shutter 1.333 sqm 421.00 1 sqm 561.19
Add for MAA @ 20% 0.20 561.19 112.24
MAT-01339 BMT-N-10 PVC cladding to flush shutters 1.50mm thick 1.333 sqm 413.00 1 sqm 550.53
Add for nails & screws etc. 0.81
Rate for 1.575 sqm 7760.20
Overheads&Contractors Profit @13.615% 0.13615 7760.20 1056.55
8816.75
Rate for 1 sqm 5597.94
Say 5598
Joinery data 2021-22 - Page : 659
28 Supplying and fixing single side prelam solid panel PVC door frame (Choukhat): Providing and fixing factory made Pac single side
Prelam door frame of the size 50x47 mm with a wall thickness of 5mm, made out of extruded 5mm rigid Pac single side prelam sheet, meter
cut at two corners and joined with 2 Nos. of 150mm long brackets of 15 x 15mm MS Square tube. The two vertical door profiles are to be
reinforced with 19 x 19mm MS. square tube of 19 guage. The door frame shall be fixed to the wall using 65/100mm long MS. Screws through
the frame by using Pac fasteners. a minimum of 4 Nos. of screws to be provided for each vertical member and minimum 2nos. for horizontal
member etc. complete as per manufacture specification and direction of Engineer-incharge including conveyance of all materials, labour
charges for fixing, overheads & contractors profit complete for finished item of work.
MAT-01336 BMT-N-07 Rate as per SoR 1.435 Sqm 2600.00 1 Sqm 3731.00
MAT-00913 BMT-G.08 Cost of Aluminium tower bolt 150mm long 1 No. 86.50 Each 86.50
MAT-00931 BMT-G.26 Cost of Aluminium butt hinges 150mm long 3 Nos. 133.00 Each 399.00
MAT-00946 BMT-G.41 Cost of Aluminium aldrop 250mm long 1 No. 314.00 Each 314.00
MAT-00938 BMT-G.33 Cost of Aluminium handle 125mm long 1 No. 102.00 Each 102.00
MAT-01640 BMT-W.70 Cost of Rubber / Nylon door stop bushes 1 No. 11.00 Each 11.00
Add for nails & screws etc. 3.72
Rate for 1.435 sqm 4647.22
Overheads&Contractors Profit @13.615% 0.13615 4647.22 632.72
5279.94
Rate for 1 sqm 3679.40
Say 3679
Joinery data 2021-22 - Page : 661
30 Providing and fixing 30mm thick factory made moulded door shutter- wood free consisting of frame made out of MS. tubes 19gauge
thickness and size of 25mmX25mm for styles, top and bottom rails. MS. Frame shall have a coat of steel primers. The inner panel shall
consist of 25mm thick high density EPS conforming to IS 4671-1984 bounded with 2mm thick termite proof, water proof and fire resistant
moulded Pac sheet with 2,4,6 raised panel design in different plain and / or pre-lam colours after routing to the moulded design on one side
and 2mm plain and / or pre-lam Pac sheet on other side of the EPS. The edge of panel to be sealed with lipping of 10mm wide PVC sheet
bottom (made by sticking 2 rigid foam sheet of 5mm thickness using Pac solvent cement) and stiles sides 25mm(5mmX5) thick and 30mm
width Pac sheet fitted along MS tube for lock provision for lock height 5mm thick Pac sheet of size 150mmX100mm fixed with upper and
lower face of inner side of EPS panel etc., complete as per direction of Engineer – in-Charge, manufacture specification and drawing
including ISI marked Aluminium fixtures 3 Nos. butt hinges (IS:205) of 150mm long, 1 No. aldrop (IS:2681) 250 mm long, 1 No. tower bolt
(IS:204) of 150 mm x 10mm dia, 2 Nos. 125mm long handles (IS:208),1 No. Rubber / Nylon door stop bushes including labour charges for
fixing the shutter to frame etc., including overheads & contractors profit complete for finished item of work for door of size 750mm x
2100mm
Quantity analysis
MAT-01336 BMT-N-07 Rate as per SoR 1.333 Sqm 2600.00 1 Sqm 3465.80
MAT-00913 BMT-G.08 Cost of Aluminium tower bolt 150mm long 1 No. 86.50 Each 86.50
MAT-00931 BMT-G.26 Cost of Aluminium butt hinges 150mm long 3 Nos. 133.00 Each 399.00
MAT-00946 BMT-G.41 Cost of Aluminium aldrop 250mm long 1 No. 314.00 Each 314.00
MAT-00938 BMT-G.33 Cost of Aluminium handle 125mm long 1 No. 102.00 Each 102.00
MAT-01640 BMT-W.70 Cost of Rubber / Nylon door stop bushes 1 No. 11.00 Each 11.00
Add for nails & screws etc. 3.58
Rate for 1.333 sqm 4381.88
Overheads&Contractors Profit @13.615% 0.13615 4381.88 596.59
4978.47
Rate for 1 sqm 3734.79
Say 3735
Joinery data 2021-22 - Page : 662
31 Supply and fixing powder coated aluminium fully glazed swing door as per the approved drawing with fixed fan light of 500mm height
at top door using aluminium sections of 101.60 mmm x 44.45mm , 3.18 mm thick for frame and door shutter made of styles , top and middle
rail of 47.62mm x 44.45mm , 3.18 mm thick and bottom rail of 114.30mm x 44.45 mm , 3.18mm thick,powder coating of alluminium sections
25mm microns thick, 5 mm thick plain float glass fitted with suitable aluminium glazing clips and rubber beading in fan light portion, double
shutters fitted with 5mm thick frosted / ground glass in the top half and MDF Board: interior-Both Side Laminated -12 mm thick in
the bottom half fitted with suitable aluminium glazing clips and rubber beading,shutters mounted on double action hydraulic floor spring of
approved brand manufacture IS : 6315 marked , Hardwyn make M-3000 for doors including cost of cutting floors as required , embedding in
floors
and SS cover plates with brass pivot and sigle piece MS Sheet outer box with slide plate etc.complete (Weight Capacity up to 130 Kgs)
as approved by Engineer-in-Charge including supply and fixing ISI marked powder coated aluminium fixtures of 3 Nos. of butt hinges
(IS:205) of 150mm long(for each shutter), 4 Nos.tower bolts 10mm bolt (IS:204) 300mm long , 4 Nos.alluminium handles (IS:208) 150mm dia
and 2 Nos. aldrops (IS:2681) 300mm long including labour charges for manufacturing door , fixing the door with required No. of screws etc.,
including overheads & contractors profit complete for finished item of work. (The Aluminium section used shall be standard make confirming
to IS 1948 – 1961) and as approved by the Engineer) (2000mm x 2600mm)
(BLD-CSTN-13-31)
Quantity analysis Size : 2.00m x 2.60m 5.20 sqm
Outer frame (101.60 x 44.45, 3.18mm thick) 2 x 2.00 + 2 x 2.60 9.20 RM
Mullions (101.60 x 44.45, 3.18mm thick) 1 x 0.50 0.50 RM
9.70 RM
= 9.70 RM @ 2.404 Kgs / RM 23.319 Kgs.
Shutters, styles and rails(47.62mm x 44.45mm , 3.18 mm thick) 4 x 2.10 + 2 x 2 x 1.00 12.40 RM
= 12.40 RM @1.501 Kgs/ RM 18.612 Kgs.
Bottom rails (114.30 x 44.45. 3.18mm thick) 2 x 1.00 2.00 RM
= 2.00 RM @ 2.646 Kgs / RM 5.292 Kgs.
2 x 2 x 2(1.00+0.50) +
2 x 2 x 2(1.00+1.20) +
Glazing clips 2 x 2 x 2(1.00+0.90) 44.80 RM
= 44.80 RM @ 0.101 Kgs /RM 4.525 Kgs.
51.748 Kgs.
5mm thick plain glass 2 x 1.00 x 0.50 1.00 sqm.
5mm thick ground glass 2 x 1.00 x 1.20 2.40 sqm.
MDF Board: interior-Both Side Laminated - 12 mm thick
2 x 1.00 x 0.90 1.80 sqm.
Rubber beading 2 x 2(1.00+0.50)+2 x 2(1.00+1.20) 14.80 RM
Cost analysis
A.Material :
MAT-01575 BMS-W-01 Cost of powder coated Al. sections 51.748 Kgs. 337.00 1 Kg. 17439.08
MAT-01053 BMT-I.02 Cost of 5mm thick plain glass 1.00 sqm 634.00 1 sqm 634.00
MAT-01067 BMT-I.16 5mm thick ground glass 2.40 sqm 750.00 1 sqm 1800.00
Joinery data 2021-22 - Page : 663
MAT-01166 BMT-K.58 MDF Board: interior-Both Side Laminated - 12 mm thick 1.80 sqm 700.00 1 sqm 1260.00
MAT-01580 BMS-W-06 Cost of rubber beading 14.80 RM 2.00 1 RM 29.60
MAT-00982 BMT-G.77 Cost of floor springs 2 Nos. 3900.00 Each 7800.00
MAT-00931 BMT-G.26 Cost of Aluminium butt hinges 150mm long 6 Nos. 133.00 Each 798.00
MAT-00916 BMT-G.11 Cost of Al. tower bolts 300mm 4 Nos. 152.00 Each 608.00
MAT-00939 BMT-G.34 Cost of Al. round handles 150mm dia. 4 Nos. 114.00 Each 456.00
MAT-00947 BMT-G.42 Cost of Al. aldrops 300mm 2 Nos. 338.00 Each 676.00
B.Labour charges 5.20 sqm 863.17 1 sqm 4488.48
Add for Screws, Nails, Nuts, Bolts etc., LS 0.30
Rate per 5.20 sqm 35989.46
Overheads&Contractors Profit @13.615% 0.13615 35989.46 4899.96
40889.42
Rate per 1 sqm 7863.35
Say 7863
32 Supply and fixing powder coated aluminium fully glazed swing door as per the approved drawing with fixed fan light of 500mm height
at top door using aluminium sections of 101.60 mmm x 44.45mm , 3.18 mm thick for frame and door shutter made of styles , top and middle
rail of 47.62mm x 44.45mm , 3.18 mm thick and bottom rail of 114.30mm x 44.45 mm , 3.18mm thick,powder coating of alluminium sections
25mm microns thick, 5 mm thick plain float glass fitted with suitable aluminium glazing clips and rubber beading in fan light portion, double
shutters fitted with 5mm thick frosted / ground glass in the top half and MDF Board: interior-Both Side Laminated -12 mm thick in
the bottom half fitted with suitable aluminium glazing clips and rubber beading,shutters mounted on double action hydraulic floor spring of
approved brand manufacture IS : 6315 marked , Hardwyn make M-3000 for doors including cost of cutting floors as required , embedding in
floors
and SS cover plates with brass pivot and sigle piece MS Sheet outer box with slide plate etc.complete( Weight Capacity up to 130 Kgs ) as
approved by Engineer-in-Charge including supply and fixing ISI marked powder coated aluminium fixtures of 3 Nos. of butt hinges (IS:205)
of 150mm long(for each shutter), 4 Nos.tower bolts 10mm bolt (IS:204) 300mm long , 4 Nos.alluminium handles (IS:208) 150mm dia and 2
Nos. aldrops (IS:2681) 300mm long including labour charges for manufacturing door , fixing the door with required No. of screws etc.,
including overheads & contractors profit complete for finished item of work. (The Aluminium section used shall be standard make confirming
to IS 1948 – 1961) and as approved by the Engineer) (1800mm x 2600mm)
(BLD-CSTN-13-31)
Quantity analysis Size : 1.80m x 2.60m 4.68 sqm
Outer frame (101.60 x 44.45, 3.18mm thick) 2 x 1.80 + 2 x 2.60 8.80 RM
and SS cover plates with brass pivot and sigle piece MS Sheet outer box with slide plate etc.complete( Weight Capacity up to 130 Kgs ) as
approved by Engineer-in-Charge including supply and fixing ISI marked powder coated aluminium fixtures of 3 Nos. of butt hinges (IS:205)
of 150mm long(for each shutter), 4 Nos.tower bolts 10mm bolt (IS:204) 300mm long , 4 Nos.alluminium handles (IS:208) 150mm dia and 2
Nos. aldrops (IS:2681) 300mm long including labour charges for manufacturing door , fixing the door with required No. of screws etc.,
including overheads & contractors profit complete for finished item of work. (The Aluminium section used shall be standard make confirming
to IS 1948 – 1961) and as approved by the Engineer) (1500mm x 2600mm)
(BLD-CSTN-13-31)
Quantity analysis Size : 1.50m x 2.60m 3.90 sqm
Outer frame (101.60 x 44.45, 3.18mm thick) 2 x 1.50 + 2 x 2.60 8.20 RM
Mullions (101.60 x 44.45, 3.18mm thick) 1 x 0.50 0.50 RM
8.70 RM
= 8.70 RM @ 2.404 Kgs / RM 20.915 Kgs.
Shutters, styles and rails(47.62mm x 44.45mm , 3.18 mm thick) 4 x 2.10 + 2 x 2 x 0.75 11.40 RM
= 11.40 RM @1.501 Kgs/ RM 17.111 Kgs.
Bottom rails (114.30 x 44.45. 3.18mm thick) 2 x 0.75 1.50 RM
= 1.50 RM @ 2.646 Kgs / RM 3.969 Kgs.
2 x 2 x 2(0.75+0.50) +
2 x 2 x 2(0.75+1.20) +
Glazing clips 2 x 2 x 2(0.75+0.90) 38.80 RM
= 38.80 RM @ 0.101 Kgs /RM 3.919 Kgs.
45.914 Kgs.
5mm thick plain glass 2 x 0.75 x 0.50 0.75 sqm.
5mm thick ground glass 2 x 0.75 x 1.20 1.80 sqm.
MDF Board: interior-Both Side Laminated - 12 mm thick
2 x 0.75 x 0.90 1.35 sqm.
Rubber beading 2 x 2(0.75+0.50)+2 x 2(0.75+1.20) 12.80 RM
Cost analysis
A.Material :
MAT-01575 BMS-W-01 Cost of powder coated Al. sections 45.91 Kgs. 337.00 1 Kgs. 15473.02
MAT-01053 BMT-I.02 Cost of 5mm thick plain glass 0.75 sqm 634.00 1 sqm 475.50
MAT-01067 BMT-I.16 5mm thick ground glass 1.80 sqm 750.00 1 sqm 1350.00
Joinery data 2021-22 - Page : 666
MAT-01166 BMT-K.58 MDF Board: interior-Both Side Laminated - 12 mm thick 1.35 sqm 700.00 1 sqm 945.00
MAT-01580 BMS-W-06 Cost of rubber beading 12.80 RM 2.00 1 RM 25.60
MAT-00982 BMT-G.77 Cost of floor springs 2 Nos. 3900.00 Each 7800.00
MAT-00931 BMT-G.26 Cost of Aluminium butt hinges 150mm long 6 Nos. 133.00 Each 798.00
MAT-00916 BMT-G.11 Cost of Al. tower bolts 300mm 4 Nos. 152.00 Each 608.00
MAT-00939 BMT-G.34 Cost of Al. round handles 150mm dia. 4 Nos. 114.00 Each 456.00
MAT-00947 BMT-G.42 Cost of Al. aldrops 300mm 2 Nos. 338.00 Each 676.00
B.Labour charges 3.90 sqm 863.17 1 sqm 3366.36
Add for Screws, Nails, Nuts, Bolts etc., LS 1.31
Rate per 3.90 sqm 31974.79
Overheads&Contractors Profit @13.615% 0.13615 31974.79 4353.37
36328.16
Rate per 1 sqm 9314.91
Say 9315
34 Providing & Fixing of Scientific Doors with metal door frames and door shutters made of galvanize steel (base steel as per IS 513 of
0.58 mm thick D quality, galvanized as per IS 277 with Zinc of 120 GSM)coated with Zinc Phosphate Primer to receive any paint on site or
finished with Thermosetting Polyurethane paint of Aliphatic Grade providing high levels of scratch resistance and durability/Epoxy polyester
powder for powder coating paint thickness 50-60 microns (Dry film thickness) outer frame section of 100 x 58 mm x 1.2 mm thick, shutter
section of 0.80 mm thick galvanized steel sheet pressed (roll formed) for 46mm thick fully flush, double skin door shell seam joints at stile
edges, in-fill of honeycomb Kraft paper used to give the required rigidity and effective acoustic insulation with 6” Tower bolt – 1 No., 6” D
handles – 2 Nos., 10” Aldrops – 1 No., Butt Hinges – 3 Nos, Mortise Lock of approved quality – 1 No, frames fixed to the concrete/masonry
wall by means of self expanding screws including overheads and contractor profit etc.,complete for finished item of work for Single leaf Door
MAT-01374 BMT-N.45 Rate as per SoR 1.00 sqm 10519.00 1 sqm 10519.00
Overheads&Contractors Profit @13.615% 0.14 10519.00 1432.16
Rate per 1 sqm 11951.16
Say 11951
35 Providing & Fixing of Scientific Doors with metal door frames and door shutters made of galvanize steel (base steel as per IS 513 of
0.58 mm thick D quality, galvanized as per IS 277 with Zinc of 120 GSM). coated with Zinc Phosphate Primer to receive any paint on site or
finished with Thermosetting Polyurethane paint of Aliphatic Grade providing high levels of scratch resistance and durability/Epoxy polyester
powder for powder coating paint thickness 50-60 microns (Dry film thickness) outer frame section of 100 x 58 mm x 1.2 mm thick, shutter
section of 0.80 mm thick galvanized steel sheet pressed (roll formed) for 46mm thick fully flush, double skin door shell seam joints at stile
edges, in-fill of honeycomb Kraft paper used to give the required rigidity and effective acoustic insulation with 6” Tower bolt – 2 Nos., 6” D
handles – 2 Nos., 10” Aldrops – 1 No., Butt Hinges – 6 Nos, Mortise Lock of approved quality – 1 No, frames fixed to the concrete/masonry
wall by means of self expanding screws including overheads and contractor profit etc., complete for finished item of work for Double leaf
Door
MAT-01375 BMT-N.46 Rate as per SoR 1.00 sqm 10989.00 1 sqm 10989.00
Joinery data 2021-22 - Page : 667
Overheads&Contractors Profit @13.615% 0.13615 10989.00 1496.15
Rate per 1 sqm 12485.15
Say 12485
36 Supply & Fixing of Lead Lined Stainless steel Clean room door frames and shutters made of Stainless steel grade of 304 hairline
finish, frame with 1.60mm (16SWG) thick hairline finish Stainless steel grade of 304 formed to Single/double rebate profile of size 100 mm x
58mm/ 143 x 58 mm, door frames with a single / multi Layer of Lead sheet varying thickness from 3mm /1mm to 2mm depends on radiation
level, the shutter with 1.2 mm thick hairline finish Stainless steel grade of 304 formed to provide a 46mm thick fully flush, double skin door
shell with Lock Seam joints at stile edges with a single / multi Layer of Lead sheet varying thickness from 3mm /1mm to 2mm depends on
radiation level. The lead sheets extend the full width and height of the door. Lead thickness is to be equal to the shielding in the adjacent wall.
Hardware can be provided with Stainless Steel Ball Bearing Butt Hinges 3 mm thick fixed flush to the frame and shutter etc., including
overheads and contractor profit etc., complete for finished item of work in all floors
MAT-01391 BMT-N.62 Rate as per SoR 1.00 sqm 24087.00 1 sqm 24087.00
Overheads&Contractors Profit @13.615% 0.13615 24087.00 3279.45
Rate per 1 sqm 27366.45
Say 27366
37 Providing & Fixing of Openable Windows with Fly-mesh made of pre-painted steel (Base Steel as per IS 513 of 0.58 mm thick
galvanized as per IS 277 with zinc of 150 GSM) primer coated with epoxy primer of 5-7 microns thick, finish painted with a polyester paint of
12-16 microns thick and back coated with 5-7 microns thick alkyd backer and the section for outer frame of 72 x 55mm, centre mullion of 72 x
50mm, section for fixed glass beading section of 12 x 12 mm and section for shutters of 48 x 25 mm and outer frame & mullion sections with
rebate for glazed shutters, fly mesh and a 20 mm provision for guard bars/grills and fly mesh shutter section of 20 x 40 mm and the sections
cut to length metre joined with corner bracket, centre mullions fixed with mullion cap, stay, handles, latch 2 Nos of heavy duty stainless steel
pivot hinges per shutter and panelled with 5mm thick plain float glass and S.S. Mesh for fly mesh shutter (304 grade), fitted using rubber
gaskets including fixing the windows in the concrete/masonry wall by means of self expanding screws, including 10mm Square guard bars
with 6” (152.4mm) pitch including cost cost and conveyance of all materials, labour charges for fixing, overheads and contractors profit etc.,
complete for finished item of work in all floors.
a Centre fixed both side openable shutter window : 1800mm x1800mm 3.24 sqm
MAT-01433 BMT - P.25 Window portion 2.34 sqm 5897.00 1 sqm 13798.98
Fan light portion
MAT-01492 BMT - Q.05&06
0.90 sqm 4596.00 1 sqm 4136.40
Rate per 3.24 sqm 17935.38
Rate per 1 sqm 5535.61
MAT-01053 BMT-I.02 deduct cost of 5mm plain glass 1.00 sqm 634.00 1 sqm -634.00
MAT-01064 BMT-I.13 add cost of 4mm thick pin headed glass 1.00 sqm 370.00 1 sqm 370.00
5271.61
Overheads&Contractors Profit @13.615% 0.13615 5271.61 717.73
Rate per 1 sqm 5989.34
Joinery data 2021-22 - Page : 668
Say 5989
Joinery data 2021-22 - Page : 669
b Centre fixed both side openable shutter window : 1500mm x1800mm 2.70 sqm
MAT-01432 BMT - P.24 Window portion 1.95 sqm 6625.00 1 sqm 12918.75
Fan light portion
MAT-01492 BMT - Q.05&06
0.75 sqm 4596.00 1 sqm 3447.00
Rate per 2.70 sqm 16365.75
Rate per 1 sqm 6061.39
MAT-01053 BMT-I.02 deduct cost of 5mm plain glass 1.00 sqm 634.00 1 sqm -634.00
MAT-01064 BMT-I.13 add cost of 4mm thick pin headed glass 1.00 sqm 370.00 1 sqm 370.00
5797.39
Overheads&Contractors Profit @13.615% 0.13615 5797.39 789.31
Rate per 1 sqm 6586.70
Say 6587
c Double shutter window 1200x1800 with fixed fan light of 500mm at top : 2.16 sqm
MAT-01430,
MAT- BMT - P.22,23
Window portion 1.56 sqm 7288.00 1 sqm 11369.28
01431
Fan light portion
MAT-01492 BMT - Q.05&06
0.60 sqm 4596.00 1 sqm 2757.60
Rate per 2.16 sqm 14126.88
Rate per 1 sqm 6540.22
MAT-01053 BMT-I.02 deduct cost of 5mm plain glass 1.00 sqm 634.00 1 sqm -634.00
MAT-01064 BMT-I.13 add cost of 4mm thick pin headed glass 1.00 sqm 370.00 1 sqm 370.00
6276.22
Overheads&Contractors Profit @13.615% 0.13615 6276.22 854.51
Rate per 1 sqm 7130.73
Say 7131
d Double shutter window 900x1800 with fixed fan light of 500mm at top : 1.62 sqm
MAT-01430,
MAT- BMT - P.22,23
Window portion 1.17 sqm 7288.00 1 sqm 8526.96
01431
Fan light portion
MAT-01492 BMT - Q.05&06
0.45 sqm 4596.00 1 sqm 2068.20
Rate per 1.62 sqm 10595.16
Rate per 1 sqm 6540.22
MAT-01053 BMT-I.02 deduct cost of 5mm plain glass 1.00 sqm 634.00 1 sqm -634.00
MAT-01064 BMT-I.13 add cost of 4mm thick pin headed glass 1.00 sqm 370.00 1 sqm 370.00
6276.22
Overheads&Contractors Profit @13.615% 0.13615 6276.22 854.51
Rate per 1 sqm 7130.73
Say 7131
Joinery data 2021-22 - Page : 670
e Centre fixed both side openable shutter window 1800mmx1300mm : 2.34 sqm
MAT-01433 BMT - P.25 Window portion 2.34 sqm 5897.00 1 sqm 13798.98
Rate per 1 sqm 5897.00
MAT-01053 BMT-I.02 deduct cost of 5mm plain glass 1.00 sqm 634.00 1 sqm -634.00
MAT-01064 BMT-I.13 add cost of 4mm thick pin headed glass 1.00 sqm 370.00 1 sqm 370.00
5633.00
Overheads&Contractors Profit @13.615% 0.13615 5633.00 766.93
Rate per 1 sqm 6399.93
Say 6400
f Centre fixed both side openable shutter window 1500mmx1300mm : 1.95 sqm
MAT-01432 BMT - P.24 Window portion 1.95 sqm 6625.00 1 sqm 12918.75
Rate per 1 sqm 6625.00
MAT-01053 BMT-I.02 deduct cost of 5mm plain glass 1.00 sqm 634.00 1 sqm -634.00
MAT-01064 BMT-I.13 add cost of 4mm thick pin headed glass 1.00 sqm 370.00 1 sqm 370.00
6361.00
Overheads&Contractors Profit @13.615% 0.13615 6361.00 866.05
Rate per 1 sqm 7227.05
Say 7227
38 Supply and fixing of pre-painted steel openable windows base steel as per IS 513 of -0.58 mm thick 'D" quality, galvanized as per IS
277 , finish painted with a polyester paint of 12-16 microns thick and back coated with 5-7 microns thick alkyd backer, section for outer frame
of 46 x 52 mm section and for shutter of 46 x 46 mm section for mullion 46 x 70 mm, and section for beading should be 18 x 25 mm with 5
mm thick plain float glass fitted with Ethyl propylene Diamine monomer Gasket (EPDM) and handle made of high grade aluminium powder
coated with frames fixed to the concrete /masonry wall by means of self expanding screws including 10 mm square guard bars with 6" pitch
C2101
A) WINDOWS
a Centre fixed both side openable shutter window 1800mm x 1800mm with fixed fan light of 500mm at top :
3.24 sqm
MAT-01415 ,
BMT - P.07,08
MAT-01416 Window portion 2.34 sqm 5411.00 1 sqm 12661.74
Fan light portion
MAT-01492 BMT - Q.05&06
0.90 sqm 4596.00 1 sqm 4136.40
Rate per 3.24 sqm 16798.14
Rate per 1 sqm 5184.61
MAT-01053 BMT-I.02 deduct cost of 5mm plain glass 1.00 sqm 634.00 1 sqm -634.00
MAT-01064 BMT-I.13 add cost of 4mm thick pin headed glass 1.00 sqm 370.00 1 sqm 370.00
4920.61
Overheads&Contractors Profit @13.615% 0.13615 4920.61 669.94
Rate per 1 sqm 5590.55
Say 5591
b Centre fixed both side openable shutter window 1500x1800 with fixed fan light of 500mm at top : 2.70 sqm
MAT-01415 ,
BMT - P.07,08
MAT-01416 Window portion 1.95 sqm 5411.00 1 sqm 10551.45
Fan light portion
MAT-01492 BMT - Q.05&06
0.75 sqm 4596.00 1 sqm 3447.00
Rate per 2.70 sqm 13998.45
Rate per 1 sqm 5184.61
MAT-01053 BMT-I.02 deduct cost of 5mm plain glass 1.00 sqm 634.00 1 sqm -634.00
MAT-01064 BMT-I.13 add cost of 4mm thick pin headed glass 1.00 sqm 370.00 1 sqm 370.00
4920.61
Overheads&Contractors Profit @13.615% 0.13615 4920.61 669.94
Rate per 1 sqm 5590.55
Say 5591
Joinery data 2021-22 - Page : 672
c Double shutter window 1200x1800 with fixed fan light of 500mm at top : 2.16 sqm
MAT-01412 BMT - P.04 Window portion 1.56 sqm 6379.00 1 sqm 9951.24
Fan light portion
MAT-01492 BMT - Q.05&06
0.60 sqm 4596.00 1 sqm 2757.60
Rate per 2.16 sqm 12708.84
Rate per 1 sqm 5883.72
MAT-01053 BMT-I.02 deduct cost of 5mm plain glass 1.00 sqm 634.00 1 sqm -634.00
MAT-01064 BMT-I.13 add cost of 4mm thick pin headed glass 1.00 sqm 370.00 1 sqm 370.00
5619.72
Overheads&Contractors Profit @13.615% 0.13615 5619.72 765.13
Rate per 1 sqm 6384.85
Say 6385
d Double shutter window 900x1800 with fixed fan light of 500mm at top : 1.62 sqm
MAT-01412 BMT - P.04 Window portion 1.17 sqm 6379.00 1 sqm 7463.43
Fan light portion
MAT-01492 BMT - Q.05&06
0.45 sqm 4596.00 1 sqm 2068.20
Rate per 1.62 sqm 9531.63
Rate per 1 sqm 5883.72
MAT-01053 BMT-I.02 deduct cost of 5mm plain glass 1.00 sqm 634.00 1 sqm -634.00
MAT-01064 BMT-I.13 add cost of 4mm thick pin headed glass 1.00 sqm 370.00 1 sqm 370.00
5619.72
Overheads&Contractors Profit @13.615% 0.13615 5619.72 765.13
Rate per 1 sqm 6384.85
Say 6385
39 Supplying and fixing of Top Hung Ventilators made of pre - painted steel (base steel as per IS 513 of -0.58 mm thick 'D" quality,
galvanized as per IS 277 with zinc of 120 GSM) primer coated with epoxy primer of 5-7 microns thick, finish painted with a polyester paint of
12-16 microns thick and back coated with 5-7 microns thick alkyd backer, section for outer frame of 46 x 52 mm section and for shutter of 46
x 46 mm section for mullion 46 x 70 mm, The Ventilator to be panelled 4 mm pinhead glass with Ethyl propylene Diamine monomer Gasket
(EPDM) and the sections cut to length mitre joined with corner brocket mullions fixed using mullion cap and with handle made of high grade
aluminium powder coated and nylon receiver, corner brackets made of CRCA with Zinc Phosphate, Mullion caps made of glass filled nylon,
frames fixed to the concrete /masonry wall by means of self expanding screws including 10 mm square guard bars with 6" pitch C2176
MAT-01418 ,
BMT-P.10, 11 ,
MAT-01419,
12
MAT-01420 Top Hung of any size 1.00 sqm 6798.00 1 sqm 6798.00
Overheads&Contractors Profit @13.615% 0.13615 6798.00 925.55
Rate per 1 sqm 7723.55
Say 7724
Joinery data 2021-22 - Page : 674
40 Supplying and fixing of Fixed Louvered Ventilators made of pre - painted steel (base steel as per IS 513 of -0.58 mm thick 'D" quality,
galvanized as per IS 277 with zinc of 120 GSM) primer coated with epoxy primer of 5-7 microns thick, finish painted with a polyester paint of
12-16 microns thick and back coated with 5-7 microns thick alkyd backer, The section for louvered ventilators should be of of 33 x 56 mm Box
section paneled with 4 mm pinhead glass with Ethyl propylene Diamine monomer Gasket (EPDM) and the sections cut to length mitre joined
with corner bracket . corner brackets made of CRCA with Zinc Phosphate. The frames to be fixed to the concrete /masonry wall by means of
self expanding screws including 10 mm square guard bars with 6" pitch including cost cost and conveyance of all materials, labour charges
for fixing, overheads and contractors profit etc., complete for finished item of work in all floors.
MAT-01421 ,
MAT-01422, BMT-P.13,14,15
MAT-01423 Fixed louvered of any size 1.00 sqm 4650.00 1 sqm 4650.00
Overheads&Contractors Profit @13.615% 0.13615 4650.00 633.10
Rate per 1 sqm 5283.10
Say 5283
41 Providing and fixing factory made uPVC white colour sliding glazed window upto 1.50 m in height dimension comprising of uPVC multi-
chambered frame with in-built roller track and sash extruded profiles duly reinforced with 1.60 ± 0.2 mm thick galvanized mild steel section
made from roll forming process of required length (shape & size according to uPVCprofile), appropriate dimension of uPVC extruded glazing
beads and uPVC extruded interlocks, EPDM gasket, wool pile, zinc alloy (white powder coated) touch locks with hook, zinc alloy body with
single nylon rollers (weight bearing capacity to be 40 kg), G.I fasteners 100 x 8 mmsize for fixing frame to finished wall and necessary
stainless steel screwsetc. Profile of frame & sash shall be mitred cut and fusion welded at all corners, including drilling of holes for fixing
hardware and drainage ofwater etc. After fixing frame the gap between frame and adjacent finishedwall shall be filled with weather proof
silicon sealent over backer rod of required size and of approved quality, all complete as per approved drawing & direction of Engineer-in-
Charge inclusive of cost of Single / double glass panes, wire mesh and silicon sealent . Note: For uPVC frame and sash extruded profiles
minus 5% tolerance in dimension i.e. in depth & width of profile shall be acceptable.Variation in profile dimension in higher side shall be
accepted but no extra payment on this account shall be made.
Two track two panels sliding window made of frame 67 x 50 mm & sash 46 x 62 mm both having wall thickness of 2.3 ± 0.2 mm and single
glazing bead / double glazing bead of appropriate dimension (Area of window up to 1.75 sqm).
MAT-05447 BMT - P.80.A Rate as per SoR 1.00 sqm 6460.00 1.00 sqm 6460.00
MAT-01053 BMT-I.02 Deduct cost of 5mm thick plain float glass 1.00 sqm 634.00 1 sqm -634.00
MAT-01064 BMT-I.13 Add cost of 4mm thick pin headed glass 1.00 sqm 370.00 1 sqm 370.00
6196.00
Overheads&Contractors Profit @13.615% 0.13615 6196.00 843.59
Rate per 1 sqm 7039.59
Say 7040
Joinery data 2021-22 - Page : 675
42 Providing and fixing factory made uPVC white colour sliding glazed window upto 1.50 m in height dimension comprising of uPVC multi-
chambered frame with in-built roller track and sash extruded profiles duly reinforced with 1.60 ± 0.2 mm thick galvanized mild steel section
made from roll forming process of required length (shape & size according to uPVCprofile), appropriate dimension of uPVC extruded glazing
beads and uPVC extruded interlocks, EPDM gasket, wool pile, zinc alloy (white powder coated) touch locks with hook, zinc alloy body with
single nylon rollers (weight bearing capacity to be 40 kg), G.I fasteners 100 x 8 mmsize for fixing frame to finished wall and necessary
stainless steel screwsetc. Profile of frame & sash shall be mitred cut and fusion welded at all corners, including drilling of holes for fixing
hardware and drainage ofwater etc. After fixing frame the gap between frame and adjacent finishedwall shall be filled with weather proof
silicon sealent over backer rod of required size and of approved quality, all complete as per approved drawing & direction of Engineer-in-
Charge inclusive of cost of Single / double glass panes, wire mesh and silicon sealent . Note: For uPVC frame and sash extruded profiles
minus 5% tolerance in dimension i.e. in depth & width of profile shall be acceptable.Variation in profile dimension in higher side shall be
accepted but no extra payment on this account shall be made.
Two track two panels sliding window made of (big series) frame 67 x 50 mm & sash 46 x 62 mm both having wall thickness of 2.3 ± 0.2
mm and single glazing bead / double glazing bead of appropriate dimension . (Area of window above 1.75 sqm
MAT-05449 BMT - P.80.C Rate as per SoR 1.00 sqm 6655.00 1.00 sqm 6655.00
MAT-01053 BMT-I.02 Deduct cost of 5mm thick plain float glass 1.00 sqm 634.00 1 sqm -634.00
MAT-01064 BMT-I.13 Add cost of 4mm thick pin headed glass 1.00 sqm 370.00 1 sqm 370.00
6391.00
Overheads&Contractors Profit @13.615% 0.13615 6391.00 870.13
Rate per 1 sqm 7261.13
Say 7261
43 Providing and fixing factory made uPVC white colour two track two panels sliding glazed window above 1.50 m in height dimension
comprising of uPVC multi-chambered frame with in-built roller track and sash extruded profiles duly reinforced with 1.60 ± 0.2 mm thick
galvanized mild steel section made from rollforming process of required length (shape & size according to uPVCprofile), appropriate
dimension of uPVC extruded glazing beads, uPVCextruded interlocks and uPVC extruded Inline sash adaptor (if required), EPDM gasket,
wool pile, zinc alloy (white powder coated) handle onone side of extreme panel along with zinc plated mild steel multi pointlocking having
transmission gear with keeps, zinc alloy (white powdercoated) touch lock with hook (if required for wire mesh panel), stainlesssteel (SS 304
grade) body with adjustable double nylon rollers (weightbearing capacity to be 120 kg), G.I fasteners 100 x 8 mm size for fixingframe to
finished wall and necessary stainless steel screws etc. Profileof frame & sash shall be mitred cut and fusion welded at all corners,including
drilling of holes for fixing hardware's and drainage of water etc. After fixing frame the gap between frame and adjacent finished wall shallbe
filled with weather proof silicon sealent over backer rod of requiredsize and of approved quality, all complete as per approved drawing &
direction of Engineer-in-Charge inclusive of cost of Single / double glass panes, wire mesh and silicon sealent .
Two track two panels sliding window made of (big series) frame 67 x 50 mm & sash 46 x 62 mm both having wall thickness of 2.3 ± 0.2 mm
and single glazing bead / double glazing bead of appropriate dimension. (Area of window above2.50 sqm upto 4.00 sqm) Note: For uPVC
frame and sash extruded profiles minus 5% tolerancein dimension i.e. in depth & width of profile shall be acceptable.Variation in profile
dimension in higher side shall be accepted but no extra payment on this account shall be made.
MAT-05450 BMT - P.81 Rate as per SoR 1.00 sqm 6606.00 1.00 sqm 6606.00
MAT-01053 BMT-I.02 Deduct cost of 5mm thick plain float glass 1.00 sqm 634.00 1 sqm -634.00
Joinery data 2021-22 - Page : 676
MAT-01064 BMT-I.13 Add cost of 4mm thick pin headed glass 1.00 sqm 370.00 1 sqm 370.00
6342.00
Overheads&Contractors Profit @13.615% 0.13615 6342.00 863.46
Rate per 1 sqm 7205.46
Say 7205
44 Providing and fixing factory made uPVC white colour sliding glazed window comprising of uPVC multi-chambered frame with in-built
roller track and sash extruded profiles duly reinforced with 1.60 ± 0.2 mm thick galvanized mild steel section made from roll forming process
of required length (shape & size according to uPVCprofile), appropriate dimension of uPVC extruded glazing beads and uPVC extruded
interlocks, EPDM gasket, wool pile, zinc alloy (white powder coated) touch locks with hook, zinc alloy body with single nylon rollers (weight
bearing capacity to be 40 kg), G.I fasteners 100 x 8 mmsize for fixing frame to finished wall and necessary stainless steel screwsetc. Profile
of frame & sash shall be mitred cut and fusion welded at all corners, including drilling of holes for fixing hardware and drainage ofwater etc.
After fixing frame the gap between frame and adjacent finishedwall shall be filled with weather proof silicon sealent over backer rod of
required size and of approved quality, all complete as per approved drawing & direction of Engineer-in-Charge inclusive of cost of Single /
double glass panes, wire mesh and silicon sealent . Note: For uPVC frame and sash extruded profiles minus 5% tolerance in dimension i.e. in
depth & width of profile shall be acceptable.Variation in profile dimension in higher side shall be accepted but no extra payment on this
account shall be made.
Three track three panels sliding window with fly proof SS wire mesh (Two nos. glazed & one no. wire mesh panels) made of frame
92 x 44 mm & sash 32 x 60 mmboth having wall thickness of 1.9 ± 0.2 mm and single glazing bead of appropriate dimension
MAT-05448 BMT - P.80.B Rate as per SoR 1.00 sqm 8622.00 1.00 sqm 8622.00
MAT-01053 BMT-I.02 Deduct cost of 5mm thick plain float glass 1.00 sqm 634.00 1 sqm -634.00
MAT-01064 BMT-I.13 Add cost of 4mm thick pin headed glass 1.00 sqm 370.00 1 sqm 370.00
8358.00
Overheads&Contractors Profit @13.615% 0.13615 8358.00 1137.94
Rate per 1 sqm 9495.94
Say 9496
45 Providing and fixing factory made uPVC white colour fixed glazed windows / Ventilators comprising of uPVC multi chambered frame
and mullion (where ever required) extruded profiles duly reinforced with 1.60± 0.2 mm thick galvanized mild steel section made from roll
forming process of required length (shape & size according to uPVC profile), uPVC extruded glazing beads of appropriate dimension, EPDM
gasket,G.I fasteners 100 x 8 mm size for fixing frame to finished wall, plastic packers, plastic caps and necessary stainless steel screws etc.
Profileof frame shall be mitred cut and fusion welded at all corners, mullion (if required) shall be also fusion welded including drilling of holes
for fixing hardware and drainage of water etc.
Joinery data 2021-22 - Page : 677
After fixing frame the gap between frame and adjacent finished wall shall be filled with weather proof silicon sealant over backer rod of
required size and of approved quality, all complete as per approved drawing & direction of Engineer-in-Charge inclusive of cost of Single /
double glass panes and silicon sealant. Note: For uPVC frame, sash and mullion extruded profiles minus 5%tolerance in dimension i.e. in
depth & width of profile shall be acceptable.Variation in profile dimension in higher side shall be accepted. But, no extra payment on this
account shall be made.
Fixed windows / Ventilators made of (small series) frame 47 x 50mm & mullion 47 x 68 mm both having wall thickness of 1.9 ±0.2 mm and
single glazing bead of appropriate dimension.
MAT-05446 BMT-P.79 Rate as per SoR 1.00 sqm 6238.00 1.00 sqm 6238.00
Overheads&Contractors Profit @13.615% 0.13615 6238.00 849.30
Rate for 1 sqm 7087.30
Say 7087
46 Supplying and fixing of 7.5mm thick Aluminium Grill (as approved by the department) 3.58 Kg/Sqm including cost and conveyance of
all materials, accessories, labour charges for transportation, erection at site, overheads and contractor profit etc., complete for finished item of
work
MAT-01591 BMS-W.19 Rate as per SoR 1.00 sqm 1035.00 1.00 sqm 1035.00
Overheads&Contractors Profit @13.615% 0.14 1035.00 140.92
Rate per 1 sqm 1175.92
Say 1176
47 Supplying and fixing of MS Grill to windows / in open court yards using 25mm x 6mm MS flat alround and 10mm MS square bars
horizontally at 125mm centre to centre and vertically at 300mm centre to centre including fixing with 4 Nos of MS Z holdfasts (2 on each
side) duly making cutting brick masonry, fixing and making to original surface neatly including cost and conveyance of all materials, cutting,
bending, welding, operational charges, labour charges, overheads and contractor profit etc., complete for finished item of work.
49 Providing and fixing Pre painted Steel two track sliding Window fabricated from roll formed sections made of Galvanized steel colour
coated /powder coated (Base Steel as per IS 513 „D‟ quality galvanized as per IS 277 with Zinc of 120 Gms./ Sq.mtr) with total coated
thickness of 0.58mm. Primer Coat with epoxy primer of 5-7 microns thick, finished paint with a polyester paint of 12-16 microns thick and back
coated with Alkyd backer of 5-7 microns or powder coated with pure polyester powder up to 50-60 microns thick. The External Section for two
track Sliding Window should be of 44 x 59mm with a provision for bottom track insert profile of 10x9 mm made of aluminium. Section for
Window glass shutter should be of 35x49mm, Section for Window Euro groove should be of 25x24mm, made of plastic to accommodate
standard accessories, and section for window lap strip should be of 21x4mm made of plastic. Section for Door shutter should be of 35x67mm.
The Window/ to be panelled with 4mm thick pin headed glass. The gaskets are to be made of Ethyl Propylene Diamine Manomer [EPDM].
Corner Brackets for internal and external frame to be made of glass filled nylon. Touch lock to be provided for Window Shutter. Sections are
to be cut to length, joined and assembled by means of corner brackets. The above frame to be fixed to Brick/Concrete masonry by using
Nylon self-expanding caps and driving MS electroplated 80mm screws into the caps through frames. The Grill for safety for windows to be
made of 10mm thick square rod bars with 152mm pitch including cost and conveyance of all materials, labour charges for fixing, overheads
and contractors profit etc., for complete for finished item of work in all floors.
MAT-01434 BMT-P.26 Rate as per SoR 1.00 sqm 6992.00 1.00 sqm 6992.00
MAT-01053 BMT-I.02 Deduct cost of 5mm thick plain float glass 1.00 sqm 634.00 1 sqm -634.00
MAT-01064 BMT-I.13 Add cost of 4mm thick pin headed glass 1.00 sqm 370.00 1 sqm 370.00
6728.00
Overheads&Contractors Profit @13.615% 0.13615 6728.00 916.02
Rate per 1 sqm 7644.02
Say 7644
Joinery data 2021-22 - Page : 680
50 Providing and fixing 3 Track 3 Shutter Pre painted Steel sliding Window fabricated from roll formed sections made of Galvanized steel
colour coated /powder coated (Base Steel as per IS 513 „D‟ quality galvanized as per IS 277 with Zinc of 120 Gms./ Sq.mtr) with total coated
thickness of 0.58mm. Primer Coat with epoxy primer of 5-7 microns thick, finished paint with a polyester paint of 12-16 microns thick and back
coated with Alkyd backer of 5-7 microns or powder coated with pure polyester powder up to 50-60 microns thick. The External Section for
Three Track Three Sliding Shutter should be of 44 x 107mm with a provision for bottom track insert profile of 10x9 mm made of aluminium.
Section for Window glass shutter should be of 35x49mm , Section for Window Euro groove should be of 25x24mm made of plastic to
accommodate standard accessories, and section for window lap strip should be of 21x4mm made of plastic. Section for Mesh Shutter should
be of 35x49mm. The Window to be panelled with 4mm thick pin headed glass. The gaskets are to be made of Ethyl Propylene Diamine
Manomer [EPDM]. Corner Brackets for internal and external frame to be made of glass filled nylon. Touch lock to be provided for Window
Shutter. Sections are to be cut to length, joined and assembled by means of corner brackets. The above frame to be fixed to Brick/Concrete
masonry by using Nylon self expanding caps and driving MS electroplated 80mm screws into the caps through frames. The Grill for safety for
windows to be made of 10mm thick square rod bars with 152mm pitch including cost and conveyance of all materials, labour charges for
fixing, overheads and contractors profit etc., for complete for finished item of work in all floors.
MAT-01488 BMT-P.77 Rate as per SoR 1.00 sqm 7636.00 1.00 sqm 7636.00
MAT-01053 BMT-I.02 Deduct cost of 5mm thick plain float glass 1.00 sqm 634.00 1 sqm -634.00
MAT-01064 BMT-I.13 Add cost of 4mm thick pin headed glass 1.00 sqm 370.00 1 sqm 370.00
7372.00
Overheads&Contractors Profit @13.615% 0.13615 7372.00 1003.70
Rate per 1 sqm 8375.70
Say 8376
51 Supply and fixing powder coated alimunium fully glazed 2 shutter windows with fixed panel in between openable shutters as per
approved drawings using anodized aluminium sections of 38.50mm x 33mm , 3mm thick for outer frame, 59mm(3mm) x 33mm(2.5mm) x
30mm(3mm) for mullions and 38.5mm x 33mm , 3mm thick for shutter frame , powder coating of alluminium sections 25mm microns thick
and fixing 5 mm thick plain glass fitted with suitable aluminium galzing clips and rubber beading including supplying and fixing powder
coated aluminium adjustable frictional stay hinges (2 Nos. per shutter), handle with lock (1 No. per shutter) including cost and conveyance to
site of powder coated aluminium sections, glass, rubber beading, fixtures etc., including labour charges for manufacturing window, fixing in
position using wooden blocks and sheet metal screws, etc., complete for finished item of work in all floors. (The aluminium sections used shall
be standard make confirming to IS 1948-1961 and as approved by the Engineer and fixtures shall be of ISI marked) (1800mm x 1300mm).
52 Supply and fixing powder coated alimunium fully glazed top hung ventilators fixed with 5mm thick plain glass using suitable alluminium
glazing clips and rubber beading as per approved drawings using anodized aluminium sections of 38.50mm x 33mm , 3mm thick for outer
frame, 59mm(3mm) x 33mm(2.5mm) x 30mm(3mm) for mullions shutters z section of 38.50mmx33mm,3mm thick,powder coating of all
alluminium sections 25mm microns thick, including cost and conveyance to site of powder coated aluminium sections, glass, rubber beading,
fixtures etc., including labour charges for manufacturing window, fixing in position using wooden blocks and sheet metal screws, etc.,
complete for finished item of work. (The aluminium sections used shall be standard make confirming to IS 1948-1961 and as approved by
the Engineer and fixtures shall be of ISI marked) (900mm x 500mm).
53 Supplying and fixing powder coated aluminium three track sliding window as per the approved drawing with all required accessories
such as stoppers, bolts, weather stripping etc with top and sides section of window of size 92mm x 31.5mm x 1.50mm thick, sloping outward
for for drainage, fixed and sliding shutters with bottom, sides and top section of 40mm x 18mm x 1.50mm thick, interlocking section 40mm x
28mm x 18mm x 1.50mm thick inter locked for weather scaling and mounted on nylon rollers of lift type and fixing 4mm pin headed glass for
shutters fitted with aluminium glazing clips and SS 20 gauge mesh with shutter frame for bottom, sides and top with section of size 40mm x
18mm x 1.50mm thick, inter locking section 40mm x 28mm x 18mm x 1.50mm thick inter locked for weather scaling and mounted on nylon
rollers of lift type fitted with nylon/polymer mesh on rollers/pulley duly fixed with TPV gaskets / EPDM weather seal resistant accessories like
locking system 1 No. per set of sashes and the system is to be installed at the site using anchor fasteners, silicon rubber sealant, easy
glazing/deglazing at site etc., including fixing of 100mm long Aluminium handle to each shutter, cost and conveyance to site of powder
coated aluminium sections, glass, rubber beading , fixtures etc., including labour charges for manufacturing window, fixing in position using
wooden blocks and sheet metal screws, overheads & contractors profit etc., complete for finished item of work. (The aluminium sections
used shall be standard make confirming to IS 1948-1961 and as approved by the Engineer and fixtures shall be of ISI marked) (1200mm x
1200mm)
Cost analysis
A.Material :
MAT-01575 BMS-W-01 Cost of powder coated Al. sections 11.686 Kgs. 337.00 1 Kgs. 3938.18
MAT-01064 BMT-I.13 Cost of 4mm thick pin headed glass 1.44 sqm. 370.00 1 sqm. 532.80
MAT-01580 BMS-W-06 Cost of rubber beading 3.60 RM 2.00 1 RM 7.20
MAT-00937 BMT-G.32 Cost of aluminium handles 100mm long 3 Nos 68.00 1 Each 204.00
MAT-00885 BMT-F.19 Cost of SS mesh 0.78 sqm. 564.00 1 sqm. 439.92
B.Labour charges 1.44 sqm 904.59 1 sqm 1302.61
Add for screws, nails, nuts, bolts, nylon rollers etc., LS 2.79
Joinery data 2021-22 - Page : 683
Rate per 1.44 Sqm: 6427.50
Overheads&Contractors Profit @13.615% 0.13615 6427.50 875.10
7302.61
Rate per 1 Sqm 5071.26
Say 5071
54 Supplying and fixing powder coated aluminium three track sliding window with fixed fan light of 500mm at top as per the approved
drawing with all required accessories such as stoppers, bolts, weather stripping etc with top and sides section of window of size 92mm x
31.5mm x 1.50mm thick, sloping outward for for drainage, fixed and sliding shutters with bottom, sides and top section of 40mm x 18mm x
1.50mm thick, interlocking section 40mm x 28mm x 18mm x 1.50mm thick inter locked for weather scaling and mounted on nylon rollers of lift
type and fixing 4mm pin headed glass in fan light and for shutters fitted with aluminium glazing clips and SS 20 gauge mesh with shutter
frame for bottom, sides and top with section of size 40mm x 18mm x 1.50mm thick, inter locking section 40mm x 28mm x 18mm x 1.50mm
thick inter locked for weather scaling and mounted on nylon rollers of lift type fitted with nylon/polymer mesh on rollers/pulley duly fixed with
TPV gaskets / EPDM weather seal resistant accessories like locking system 1 No. per set of sashes and the system is to be installed at the
site using anchor fasteners, silicon rubber sealant, easy glazing/deglazing at site etc., and fan light top and side section of size 63.50mm x
38.10mm, 1.53mm thick, powder coating of all Aluminium sections 25 microns thick including fixing of 100mm long Aluminium handle to each
shutter, cost and conveyance to site of powder coated aluminium sections, glass, rubber beading , fixtures etc., including labour charges for
manufacturing window, fixing in position using wooden blocks and sheet metal screws, overheads & contractors profit etc., complete for
finished item of work. (The aluminium sections used shall be standard make confirming to IS 1948-1961 and as approved by the Engineer
and fixtures shall be of ISI marked) (1500mm x 1700mm)
Cost analysis
Joinery data 2021-22 - Page : 684
A.Material :
MAT-01575 BMS-W-01 Cost of powder coated Al. sections 16.379 Kgs. 337.00 1 Kgs. 5519.72
MAT-01064 BMT-I.13 Cost of 4mm thick pin headed glass 2.55 sqm. 370.00 1 sqm. 943.50
MAT-01580 BMS-W-06 Cost of rubber beading 8.10 RM 2.00 1 RM 16.20
MAT-00937 BMT-G.32 Cost of aluminium handles 100mm long 3 Nos 68.00 1 Each 204.00
MAT-00885 BMT-F.19 Cost of SS mesh 0.72 sqm. 564.00 1 sqm. 406.08
B.Labour charges 2.55 sqm 904.59 1 sqm 2306.71
Add for screws, nails, nuts, bolts, nylon rollers etc., LS 0.69
Rate per 2.55 Sqm: 9396.90
Overheads&Contractors Profit @13.615% 0.13615 9396.90 1279.39
10676.29
Rate per 1 Sqm 4186.78
Say 4187
55 Supply and fixing powder coated alimunium sliding window with fixed fan light at top as per approved drawings with all required
accessories such as stoppers,bolts,weather stripping etc. for all sizes and sections in accordance with approved drawings and as per IS
1948-1961 with top section of window of size 62mm x 32mm ,1.47mm thick, window side frames of size 61.85mm x 31.75mm,1.50mm thick
and bottom frame size 61.85mm x 31.75mm,1.50mm thick sloping outwards for drainage and fixed and sliding shutters with bottom,sides and
top with section of 40mm x 18mm ,1.70mm thick,inter locking section 40mm x 28mm x 18mm,1.60mm thick inter locked for weather scaling
and mounted on nylon rollers of lift type and fan light top &side sections of size 63.50mmx38.10mm,1.53mm thick, powder coating of all
alluminium sections 25mm microns thick and fixing 5mm thick plain glass in fan light and for shutters fitted with
alluminium glazing clips and rubber beading including cost and conveyance to site of powder coated aluminium sections, glass, rubber
beading, fixtures etc., including labour charges for manufacturing window, fixing in position using wooden blocks and sheet metal screws,
overheads & contractors profit etc., complete for finished item of work. (The aluminium sections used shall be standard make confirming to IS
1948-1961 and as approved by the Engineer and fixtures shall be of ISI marked) ( 1800mm x 1800mm )
56 Supply and fixing powder coated alimunium sliding window with fixed fan light at top as per approved drawings with all required
accessories such as stoppers,bolts,weather stripping etc. for all sizes and sections in accordance with approved drawings and as per IS
1948-1961 with top section of window of size 62mm x 32mm ,1.47mm thick, window side frames of size 61.85mm x 31.75mm,1.50mm thick
and bottom frame size 61.85mm x 31.75mm,1.50mm thick sloping outwards for drainage and fixed and sliding shutters with bottom,sides and
top with section of 40mm x 18mm ,1.70mm thick,inter locking section 40mm x 28mm x 18mm,1.60mm thick inter locked for weather scaling
and mounted on nylon rollers of lift type and fan light top &side sections of size 63.50mmx38.10mm,1.53mm thick, powder coating of all
alluminium sections 25mm microns thick and fixing 5mm thick plain glass in fan light and 5mm thick ground glass for shutters fitted with
alluminium glazing clips and rubber beading, powder coating of all alluminium sections 25mm microns thick including cost and conveyance to
site of powder coated aluminium sections, glass,
rubber beading , fixtures etc., including labour charges for manufacturing window, fixing in position using wooden blocks and sheet metal
screws, overheads & contractors profit etc., complete for finished item of work. (The aluminium sections used shall be standard make
confirming to IS 1948-1961 and as approved by the Engineer and fixtures shall be of ISI marked) (1200mm x 1800mm)
Cost analysis
A.Material :
MAT-01575 BMS-W-01 Cost of powder coated Al. sections 12.10 Kgs. 337.00 1 Kgs. 4076.35
MAT-01064 BMT-I.13 Cost of 5mm thick plain glass 2.16 sqm 634.00 1 sqm 1369.44
MAT-01580 BMS-W-06 Cost of rubber beading 6.00 RM 2.00 1 RM 12.00
B.Labour charges 2.16 sqm 904.59 1 sqm 1953.92
Add for Screws, Nails, Nuts, Bolts etc., LS 4.77
Rate per 2.16 sqm 7416.48
Overheads&Contractors Profit @13.615% 0.13615 7416.48 1009.75
8426.23
Rate per 1 sqm 3901.03
Say 3901
57 Supply and fixing of cement bonded pre-laminated particle boards aluminum glazed partitions using 10mm cement bonded pre-
laminated particle boards and 5.00 mm thick plain glass to full height. Using with LAM to a height of 0.91 meter at bottom panel and
remaining height with glass and aluminum sections anodized to 12 to 15 microns and of sections of size 37mm x 62mm and 1.5mm thickness
with one meter centre to centre duly fixed with clip beading on both sides including fixing the frame to pillars by M.S. flats, bolts and nuts
including cost and conveyance of all materials etc., complete as directed during execution and overheads & contractors profit etc., complete
for finished item of work
MAT-01310 BMT-M.75 Rate as per SSR 1.00 sqm 3400.00 1 sqm 3400.00
Overheads&Contractors Profit @13.615% 0.13615 3400.00 462.91
Rate for 1 sqm 3862.91
Say 3863
Joinery data 2021-22 - Page : 688
58 Supplying and fixing of two shutter cupboards as per drawing with medium teak wood frames of size 75mm x 40mm and MDF Board
Interior grade both sides laminated 18mm thick for shutters with 18mm x 12mm teak wood beading alround and supplying and fixing powder
coated MS fixtures 3 Nos. butt hinges of size 100mm long(for each shutter), tower bolt 2 Nos. of 100mm x 10mm, 2 Nos of handles 100mm
long and standard locking arrangements for shutters including cost and conveyance of all materials to site, labour charges, over heads and
contractor profit etc., complete for finished item of work.
D A T A ( SoR 2022-23)
NAME OF THE WORK :- CONSTRUCTION OF PROPOSED DEGREE COLLEGE AT VEMPALLI
DATA
Standard Data
S. No. CFMS code SoR Ref Description Quantity Rate (Rs.) Unit
Ref
Dismantling, clearing away and carefully stacking useful materials for re-use and disposal of unserviceable materials with 100m lead as directed by Executive Eng
1
taking actual premeasurements before dismantling including all labour charges , overheads & contractor profit etc., complete
a) (BLD-CSTN-14-9/299) Brick masonry
LAB-00120,
CSoR III - 3,4 Mazdoor(unskilled) 0.409 Nos. 525.00 1 Each
LAB-00121
Add for MAA @ 20% 0.20 214.73
Rate per 1 cum
Overheads&Contractors Profit @13.615% 0.13615 257.67
Rate per 1 cum
say
Clean removal of lime plaster from walls and raking out joints
l) 20mm deep or from terraced roof and raking out joints 100 mm
deep
MAT-01511 BMT-S.14 Rate as per SoR 10.00 sqm 55.00 10 sqm
Add for MAA @ 20% 0.20 55.00
Rate per 10 sqm
Rate per 1 sqm
Overheads&Contractors Profit @13.615% 0.13615 6.60
Rate per 1 sqm
say
Clean removal of cement plaster from walls and raking out joint
m)
200 mm deep
MAT-01512 BMT-S.15 Rate as per SoR 10.00 sqm 68.00 10 sqm
Add for MAA @ 20% 0.20 68.00
Rate per 10 sqm
Rate per 1 sqm
Overheads&Contractors Profit @13.615% 0.13615 8.16
Rate per 1 sqm
say
CIVIL DATA 2020-21 : Page-693
Dismantling doors , windows and clear storey windows, Ventilators etc., ( wood or steel ) shutters including Chowkhats , architraves,hold fasts and other attachm
2
and stacking them within 100m lead including labour charge etc., and overheads & contractors profit complete for finished item of work
a) (BLD-CSTN-14-11 - i) Not exceeding 3 sqm in area :
Details of cost per each :
LAB-00091 CSoR II - 35 2nd class mason 0.10 Nos. 565.00 1 No.
LAB-00120 CSoR III - 3 Mazdoor(Male) 0.20 Nos. 525.00 1 No.
LAB-00091 CSoR II - 35 2nd class Blacksmith 0.05 Nos. 565.00 1 No.
Add for MAA @ 20% 0.20 189.75
Dismantling of existing dilapidated buildings including items like un-reinforced concrete, reinforced concrete, brick masonry, stone masonry etc., using Doze
3
including all hire, operational, incidental, labour charges and overheads & contractors profit etc. complete finished item of work
HIR-00072 CSoR 2 Rate as per Common SoR 1.00 Hour 1907.00 1 Hour
Overheads&Contractors Profit @13.615% 0.13615 1907.00
Rate per 1 cum
say
CIVIL DATA 2020-21 : Page-694
Earth work excavation for foundations (Manual Means) of buildings, septic tank, sump, compound wall in ordinary soils and depositing on bank with an initi
4 BLD-CSTN-2-1 10m and depth up to 3m including all operational,incidental, labour charges such as shoring, sheeting, planking, strutting etc., and overheads & contractors profit com
finished item of work excluding dewatering charges etc., as per SS 20 B(APSS 308)
Ordinary Soil - Manual Means up to 3m depth
Unit : 1 cum
Taking output : 10.00 cum
a) Labour
LAB-00120,
CSoR III - 3,4 Mazdoor ( Unskilled) 3.64 Nos. 525.00 1 No.
LAB-00121
Add for MAA @ 20% 0.20 1911.00
b&c)
Overheads&Contractors Profit @13.615% 0.13615 2293.20
Cost for 10 cum ( a+b+c)
Rate per cum (a+b+c) / 10
Rate per 1 cum Say
Earth work excavation for foundations (Mechanical Means) for buildings in ordinary soils and depositing on bank for all lifts and with an initial lead of 10m and
5 BLD-CSTN-2-2 depth including all operational,incidental, labour charges such as shoring, sheeting, planking, strutting etc., and overheads & contractors profit complete for finished ite
excluding dewatering charges etc., as per SS 20 B(APSS 308)
Ordinary Soil - Mechanical Means up to 3m depth
Unit : 1 cum
Taking output : 240.00 cum
a) Labour
LAB-00120,
CSoR III - 3,4 Mazdoor ( Unskilled) 8.32 Nos. 525.00 1 No.
LAB-00121
Add for MAA @ 20% 0.20 4368.00
b) Machinery
HIR-00052 &
CSoR 52 Shovel 0.85 cum 110hp 6.00 hours 3157.40 1 Hour
LAB-00362
HIR-00186 CSoR 52 Crew charges 6.00 hours 326.30 1 Hour
Add MA on crew charges 0.20 1957.80
c&d)
Overheads&Contractors Profit @13.615% 0.13615 26535.36
Cost for 240 cum ( a+b+c+d)
Rate per 1 cum (a+b+c+d) / 240
Say
CIVIL DATA 2020-21 : Page-695
Earth work excavation for foundations (Mechanical Means) for buildings in ordinary soils and depositing on bank for all lifts and with an initial lead of 10m and
6 BLD-CSTN-2-3 depth including all operational,incidental, labour charges such as shoring, sheeting, planking, strutting etc., and overheads & contractors profit complete for finishe
work excluding dewatering charges etc., as per SS 20 B(APSS 308)
Ordinary Soil - Mechanical Means up to 3m to 6m depth
Unit : 1 cum
Taking output : 210.00 cum
a) Labour
LAB-00120,
CSoR III - 3,4 Mazdoor ( Unskilled) 8.32 Nos. 525.00 1 No.
LAB-00121
Add for MAA @ 20% 0.20 4368.00
b) Machinery
HIR-00052& LAB-
CSoR 52 Shovel 0.85 cum 110hp 6.00 hours 3157.40 1 Hour
00362
HIR-00186 CSoR 52 Crew charges 6.00 hours 326.30 1 Hour
Add MA on crew charges 0.20 1957.80
c&d)
Overheads&Contractors Profit @13.615% 0.13615 26535.36
Cost for 210 cum ( a+b+c+d)
Rate per 1 cum (a+b+c+d) / 210
Rate per 1 cum Say
Earth work excavation for foundations (Manual Means) of buildings in ordinary rock ( not requiring blasting ) and depositing on bank with an initial lead of
7 BLD-CSTN-2-4 depth up to 3m including all operational,incidental, labour charges such as shoring, sheeting, planking, strutting etc., and overheads & contractors profit complete fo
item of work excluding dewatering charges etc., as per SS 20 B(APSS 308)
Ordinary rock(not requiring blasting) - Manual Means up to 3m depth
Unit : 1 cum
Taking output : 10.00 cum
a) Labour
LAB-00120,
CSoR III - 3,4 Mazdoor ( Unskilled) 5.20 Nos. 525.00 1 No.
LAB-00121
Add for MAA @ 20% 0.20 2730.00
b&c)
Overheads&Contractors Profit @13.615% 0.13615 3276.00
Cost for 10 cum ( a+b+c)
Rate per 1 cum (a+b+c) / 10
Rate per 1 cum Say
CIVIL DATA 2020-21 : Page-696
Earth work excavation for foundations (Mechanical Means) for buildings in ordinary rock (not requiring blasting) and depositing on bank for all lifts and with
8 BLD-CSTN-2-5 lead of 10m and up to 3m depth including all operational,incidental, labour charges such as shoring, sheeting, planking, strutting etc., and overheads & contrac
complete for finished item of work excluding dewatering charges etc., as per SS 20 B(APSS 308)
Ordinary rock(not requiring blasting)- Mechanical Means up to 3m depth
Unit : 1 cum
Taking output : 180.00 cum
a) Labour
LAB-00120,
CSoR III - 3,4 Mazdoor ( Unskilled) 6.24 Nos. 525.00 1 No.
LAB-00121
Add for MAA @ 20% 0.20 3276.00
b) Machinery
HIR-00052& LAB-
CSoR 52 Shovel 0.85 cum 110hp 6.00 hours 3157.40 1 Hour
00362
HIR-00186 CSoR 52 Crew charges 6.00 hours 326.30 1 Hour
Add MA on crew charges 0.20 1957.80
c&d)
Overheads&Contractors Profit @13.615% 0.13615 25224.96
Cost for 180 cum ( a+b+c+d)
Rate per 1 cum (a+b+c+d) / 180
Rate per 1 cum Say
CIVIL DATA 2020-21 : Page-697
Earth work excavation for foundations for buildings in hard rock (requiring blasting) and depositing on bank for all lifts and with an initial lead of 10m and
9 BLD-CSTN-2-6 depth including all operational,incidental, labour charges such as shoring, sheeting, planking, strutting etc., and overheads & contractors profit complete for finished ite
excluding dewatering charges etc., as per SS 20 B(APSS 308)
Hard rock (requiring blasting)- up to 3m depth
Unit : 1 cum
Taking output : 10.00 cum
a) Labour
LAB-00023 CSoR 39 Driller 0.50 Nos. 460.20 1 No.
LAB-00003 CSoR I - 3 Blaster 0.25 Nos. 690.00 1 No.
LAB-00120,
CSoR III - 3,4 Mazdoor ( Unskilled) 8.35 Nos. 525.00 1 No.
LAB-00121
Add for MAA @ 20% 0.20 4786.35
b) Machinery
HIR-00003 &
CSoR 3 Air compressor 7cmm (diesel) 1.00 hour 1452.80 1 Hour
LAB-00319
HIR-00039 CSoR 39 Jack hammer/Pneumatic braker 2.00 hours 18.60 1 Hour
Crew charges
HIR-00137 CSoR 3 Air compressor 1.00 Hours 294.50 1 Hour
HIR-00173 CSoR 39 Jack hammer/Pneumatic braker 2.00 Hours 460.20 1 Hour
Add MA on crew charges 0.20 1214.90
c)Material
MAT-00264 M - 104 Gelatin 80% 3.50 Kgs 68.00 1 Kg
MAT-00021 CSoR 21 Detonator electric 14 Nos. 12.00 1 No.
c&d)
Overheads&Contractors Profit @13.615% 0.13615 9097.50
Cost for 10 cum ( a+b+c+d)
Rate per 1 cum (a+b+c+d) / 10
Rate per 1 cum Say
CIVIL DATA 2020-21 : Page-698
Earth work excavation for foundations for buildings in hard rock (blasting prohibited) and depositing on bank for all lifts and with an initial lead of 10m and
10 BLD-CSTN-2-7 depth including all operational,incidental, labour charges such as shoring, sheeting, planking, strutting etc., and overheads & contractors profit complete for finished ite
excluding dewatering charges etc., as per SS 20 B(APSS 308)
Hard rock (blasting prohibited)- up to 3m depth
Unit : 1 cum
Taking output : 10.00 cum
a) Labour
LAB-00120,
CSoR III - 3,4 Mazdoor ( Unskilled) 5.20 Nos. 525.00 1 No.
LAB-00121
Add for MAA @ 20% 0.20 2730.00
b) Machinery
HIR-00003& LAB-
CSoR 3 Air compressor 6.00 Hours 1452.80 1 Hour
00319
HIR-00039 CSoR 39 Jack hammer/Pneumatic braker 12.00 Hours 18.60 1 Hour
Crew charges
HIR-00137 CSoR 3 Air compressor 6.00 Hours 294.50 1 Hour
HIR-00173 CSoR 39 Jack hammer/Pneumatic braker 12.00 Hours 460.20 1 Hour
Add MA on crew charges 0.20 7289.40
c&d)
Overheads&Contractors Profit @13.615% 0.13615 20963.28
Cost for 10 cum ( a+b+c+d)
Rate per 1 cum (a+b+c+d) / 10
Rate per 1 cum Say
Conveyance of un-useful excavated earth to a distance of 5 KM for disposal including hire charges of T & P, labour charges etc., and overheads & contrac
11
complete for finished item of work.
Rate as per SoR 1 cum 96.00 1 cum
Overheads&Contractors Profit @13.615% 0.13615 96.00
Pre construction Anti termite treatment is a process in which chemical toxic to subterrean tremites is apply/ inject into soil during early stage of building Const
Treatement of soil Beneath the building and around the foundations conduct and chemical use as per BIS - IS 6313 (Part -2) 2013 code specification & CIB RC
termiticide which creates a continuous chemical barrier beneath the building which kills or repels terminates & impervious to tremite entry 3. Imidacloprid 30.5% SC (
dissolve 2.1 Ml/1 liter of water and apply emulsion/solution @ 7.5 Litres/Square meter (Sqm) of internal, external vertical surface of the colums, plinth beams (Back fil
12
and floor junction, external perimeters, along reatining wall @ 5.0 Liters/Sqm of the horizontal surface of basement top surface of the basement filling below flooring be
& @ 2.0 Litres/ Line meter at expansion joints. The substructure of a depth of 500mm around coulmns & 300mm deep around plinth beams, basements & floor f
including excavation channel along the wall & rodding etc. cost & Conveyance of all materials to the site, cost of labour for sparying, rodding, overheads and contractor
complete for furnished item of work as per the approval of the Engineer-in-charge
Unit : 1 sqm
MAT-05352 BMT-H.66 Rate as per SoR 1 sqm 162.00 1 sqm
Overheads&Contractors Profit @13.615% 0.13615 162.00
Rate per 1 sqm
BLD-CSTN-2-8 &
Addendum
Filling with carted gravel in trenches,sides of foundations and basement with initial lead in layers not exceeding 15cm thick,watering and ramming including
dt.14.05.2019 of
13 conveyance of water to work site and all operaitonal,incidental, labour charges,hire charges of T&P etc., and overheads & contractors profit complete for fnishe
the Chief
work(APSS NO.309&310)
Engineer (R&B)
Buildings
Unit : 1 cum
Taking output 6.00 cum
a) Labour
LAB-00120,
CSoR III - 3,4 Mazdoor ( Unskilled ) 0.31 Nos. 525.00 1 No.
LAB-00121
Add for MAA @ 20% 0.20 162.75
b)Material :
MAT-00177 M - 008 Gravel 6.00 cum 561.80 1 cum
Unit : 1 cum
Taking output 6.00 cum
a) Labour
LAB-00120,
CSoR III - 3,4 Mazdoor ( Unskilled ) 0.31 Nos. 525.00 1 No.
LAB-00121
Add for MAA @ 20% 0.20 162.75
b)Material :
MAT-00028 CSoR 27(b) Coarse sand for filling 6.00 cum 916.00 1 cum
Say
BLD-CSTN-2-9 &
Addendum Filling with useful available excavated earth (excluding rock) with a lead of 50 m in trenches, sides of foundations and basement with initial lead in layers not exceed
15 dt.14.05.2019 of the thick, watering and ramming including cost and conveyance of water to work site and all operaitonal, incidental, labour charges, hire charges of T&P etc., and ove
Chief Engineer (R&B) contractors profit complete for fnished item of work (APSS NO.309&310)
Buildings
Unit : 1 cum
Taking output : 6.00 cum
a) Labour
LAB-00120,
CSoR III - 3,4 Mazdoor ( Unskilled ) 0.31 Nos. 525.00 1 No.
LAB-00121
Add for MAA @ 20% 0.20 162.75
Plain Cement Concrete (1:4:8) (cement: fine aggregate: Coarse aggregate) for foundations using coarse aggregate 40mm size hard , machine crushed gra
approved quarry using concrete Mixer 10 / 7 cft (0.2 / 0.8 cum) capacity including cost and conveyance of all materials like cement, sand, coarse aggregate, water e
16 BLD-CSTN-3-5
including all charges for machine mixing and hire charges of concrete mixer, laying concrete in foundations and under flooring bed, ramming in 15 cm layers finishing to
to the required level curing etc.,and overheads & contractors profit complete for finished item of work. (APSS No. 402)
Unit : 1 cum
A.MATERIALS :
CIVIL DATA 2020-21 : Page-701
Plain Cement Concrete (1:5:10) (cement: fine aggregate: Coarse aggregate) for foundations and under flooring bed using coarse aggregate 40mm size hard
crushed granite from approved quarry using concrete Mixer 10 / 7 cft (0.2 / 0.8 cum) capacity including cost and conveyance of all materials like cement, san
17 BLD-CSTN-3-7
aggregate, water etc. to site including all charges for machine mixing and hire charges of concrete mixer, laying concrete in foundations and under flooring bed, ramm
cm layers finishing top surface to the required level curing etc.,and overheads & contractors profit complete for finished item of work. (APSS No. 402)
Unit : 1 cum
A.MATERIALS :
Cement 129.60 Kgs 4220.00 1000 Kgs
MAT-00220 CSoR M - 055 Coarse aggregate 40mm 0.90 Cum 1349.30 1 Cum
MAT-00027 CSoR 27(a) Fine aggregate ( Sand ) 0.45 Cum 1061.00 1 Cum
MAT-00332,
M - 189(a),(b) Water(including for curing) 1.20 kl 116.00 1 kl
MAT-00333
B.MACHINERY :
HIR-00016& LAB-
CSoR 16 Concrete Mixer 10 / 7 cft (0.2 / 0.8 cum) capacity 1.00 hour 188.10 1 hour
00329
HIR-00150 CSoR 16 Crew charges 1.00 hour 306.80 1 hour
Add MA on crew charges 0.20 306.80
C.LABOUR :
LAB-00011 CSoR I -11 1st class mason 0.10 Nos. 630.00 1 Each
LAB-00120,
CSoR III - 3,4 Mazdoor (unskilled) 1.39 Nos. 525.00 1 Each
LAB-00121
Add for MAA @ 20% 0.20 792.75
Rate per 1 cum
Overheads&Contractors Profit @13.615% 0.13615 3885.49
Rate per 1 cum
Say
CIVIL DATA 2020-21 : Page-703
Random Rubble stone masonry in CM (1:8) prop: (Cement: Sand) using hard other than granite stones carted from approved quarry including cost and conveya
18 BLD-CSTN-6-13 materials like cement, screened sand, water, stones etc., from approved quarry, to site, including labour for cutting stones to required size and shape, mixing, of cemen
construction, curing etc.,and overheads & contractors profit complete for finished item of work in foundation and basement. (APSS No. 601 & 615)
Unit = 1 cum
A.MATERIALS
Cement 59.40 Kgs 4220.00 1000 Kgs
MAT-00405 CSoR 1 Rough stone (OTG) 1.10 Cum 555.75 1 Cum
MAT-00029 CSoR 28 Fine aggregate(sand) 0.33 Cum 1156.00 1 Cum
B) LABOUR
LAB-00011 CSoR I -11 1st class mason 1.20 Nos. 630.00 1 Each
LAB-00120,
CSoR III - 3,4 Mazdoor (unskilled) 2.00 Nos. 525.00 1 Each
LAB-00121
Add for MAA @ 20% 0.20 1806.00
Random Rubble stone masonry in CM (1:8) prop: (Cement: Sand) using hard granite stones carted from approved quarry including cost and conveyance of all ma
19 BLD-CSTN-6-13 cement, screened sand, water, stones etc., from approved quarry, to site including labour for cutting stones to required size and shape, mixing, of cement, mortar, con
curing etc.,and overheads & contractors profit complete for finished item of work in foundation and basement. (APSS No. 601 & 615)
Unit = 1 cum
A.MATERIALS
Cement 59.40 Kgs 4220.00 1000 Kgs
MAT-00302 CSoR 12 Rough stone (HBG) 1.10 Cum 682.30 1 Cum
MAT-00029 CSoR 28 Fine aggregate(sand) 0.33 Cum 1156.00 1 Cum
B) LABOUR
LAB-00011 CSoR I -11 1st class mason 1.20 Nos. 630.00 1 Each
LAB-00120,
CSoR III - 3,4 Mazdoor (unskilled) 2.00 Nos. 525.00 1 Each
LAB-00121
Add for MAA @ 20% 0.20 1806.00
Vibrated Plain Cement Concrete (1:3:6) nominal mix using 40mm size machine crushed hard granite metal and 20mm graded machine crushed hard granite met
BLD-CSTN-3-10 aggregate) in (2:1) ratio from approved quarry using concrete Mixer 10 / 7 cft (0.2 / 0.8 cum) capacity including cost and conveyance of all materials like cement, fine a
20
& 11 (sand), coarse aggregate, water etc. to site, all charges for mixing and hire charges of concrete mixer, centering charges, laying concrete in position, vibrating, curing,
charges, overheads & contractors profit etc.,for finished item of work for footings and basement .
Unit : 1cum
A.MATERIALS :
MAT-00220 CSoR M - 055 HBG 40mm size metal 0.60 Cum 1349.30 1 Cum
HBG 20mm size graded metal 0.30 Cum 1759.31 1 Cum
MAT-00027 CSoR 27(a) Sand 0.45 Cum 1061.00 1 Cum
Cement 220.00 Kgs 4220.00 1 MT
MAT-00332,
M - 189(a),(b) Water(including for curing) 1.20 kl 116.00 1 kl
MAT-00333
B.MACHINERY :
HIR-00016& LAB-
CSoR 16 Concrete Mixer 10 / 7 cft (0.2 / 0.8 cum) capacity 1.00 hour 188.10 1 hour
00329
HIR-00150 CSoR 16 Crew Charges 1.00 hour 306.80 1 hour
Add MA on crew charges 0.20 306.80
HIR-00040& LAB-
CSoR 40 Needle vibrator 40mm ( petrol ) 1.00 hours 38.20 1 hour
00352
HIR-00174 CSoR 40 Crew charges 1.00 hours 220.90 1 hour
Add MA on crew charges 0.20 220.90
C.LABOUR :
LAB-00011 CSoR I -11 1st class mason 0.10 Nos. 630.00 1 Each
LAB-00120,
CSoR III - 3,4 Mazdoor (Unskilled) 1.39 Nos. 525.00 1 Each
LAB-00121
Add for MAA @ 20% 0.20 792.75
Hire charges for Centering & Scaffolding 1.00 Cum 67.00 1 Cum
Centering & Scaffolding (Labour) 1.00 Cum 363.00 1 Cum
Add for MAA @ 20% 0.20 363.00
Rate for 1 cum
Overheads&Contractors Profit @13.615% 0.13615 5195.86
Rate per 1 cum
Say
CIVIL DATA 2020-21 : Page-705
Supply and placing of the Design Mix Concrete M 25 grade corresponding to IS 456 with cement content of 380 kgs per 1 cum of concrete using weigh batch
with 20mm size graded machine crushed hard granite metal (coarse aggregate - as per IS 383 - 1970 and IS 2386 Part 1 to Part 8) from approved quarry including
21 BLD-CSTN-3-14 conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site, centering using steel scaffolding pipes , jack props , wall
plates , brackets , steel centering plates etc., including all operational, incidental and labour charges such as weigh batching, machine mixing, lifting of concrete m
laying concrete, vibrating, curing etc., and overheads & contractors profit complete but excluding cost of steel and its fabrication charges for finished item of work (APSS
a Footings
Rate for Design mix M 25 1.00 Cum 8227.56 1 Cum
Hire charges of centering and scaffolding 1.00 Cum 301.00 1 Cum
Labour charges 1.00 Cum 672.00 1 Cum
Add for MAA @ 20% 0.20 672.00
b Column pedestals
Rate for Design mix M 25 1.00 Cum 8227.56 1 Cum
Hire charges of centering and scaffolding 1.00 Cum 343.00 1 Cum
Labour charges 1.00 Cum 1069.00 1 Cum
Add for MAA @ 20% 0.20 1069.00
c Plinth Beams
Rate for Design mix M 25 1.00 Cum 8227.56 1 Cum
Hire charges of centering and scaffolding 1.00 Cum 726.50 1 Cum
Labour charges 1.00 Cum 810.00 1 Cum
Add for MAA @ 20% 0.20 810.00
Supply and placing of the Design Mix Concrete M 25 grade corresponding to IS 456 with cement content of 380 kgs per 1 cum of concrete using weigh batch
with 20mm size graded machine crushed hard granite metal (coarse aggregate - as per IS 383 - 1970 and IS 2386 Part 1 to Part 8) from approved quarry including
22 BLD-CSTN-3-18 conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site, centering using casurina ballies, bamboos, wooden reapers,
wood posts, wall plates etc., including all operational, incidental and labour charges such as weigh batching, machine mixing, lifting of concrete manually, laying
vibrating, curing , overheads & contractors profit etc., complete but excluding cost of steel and its fabrication charges for finished item of work (APSS No. 402)
a) COLUMNS :
un supported height up to 3.66 m
Rate for other Floors F1 F2 F3 F4
Rate as above 8815.46 8815.46 8815.46 8815.46
Hire charges of centering and scaffolding 249.00 249.00 249.00 249.00
Labour charges 1871.00 2058.00 2245.00 2432.00
Add for MAA @ 20% 374.20 411.60 449.00 486.40
Lift charges of materials(Manual) 0.00 313.96 627.91 941.87
Add for MAA @ 20% 0.00 62.79 125.58 188.37
Rate per 1 cum 11309.66 11910.81 12511.96 13113.11
Overheads&Contractors Profit @13.615% 1539.81 1621.66 1703.50 1785.35
Rate per 1 cum 12849.47 13532.47 14215.46 14898.46
CIVIL DATA 2020-21 : Page-708
b) LINTELS :
Rate for other Floors F1 F2 F3 F4
Rate as above 8815.46 8815.46 8815.46 8815.46
Hire charges of centering and scaffolding 826.00 826.00 826.00 826.00
Labour charges 1332.00 1465.00 1598.00 1732.00
Add for MAA @ 20% 266.40 293.00 319.60 346.40
Lift charges of materials(Manual) 0.00 313.96 627.91 941.87
Add for MAA @ 20% 0.00 62.79 125.58 188.37
Rate per 1 cum 11239.86 11776.21 12312.56 12850.11
Overheads&Contractors Profit @13.615% 1530.31 1603.33 1676.36 1749.54
Rate per 1 cum 12770.17 13379.54 13988.92 14599.65
Say 12770 13380 13989 14600
C) SIDE WALLS
i) 115mm thick side walls
Cost of M 25 design mix 0.12 cum 8815.46 1.00 cum
Supply and placing of the Design Mix Concrete M 25 grade corresponding to IS 456 with cement content of 380 kgs per 1 cum of concrete using weigh batch
with 20mm size graded machine crushed hard granite metal (coarse aggregate - as per IS 383 - 1970 and IS 2386 Part 1 to Part 8) from approved quarry including
23 BLD-CSTN-3-19 conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site, centering using casurina ballies, bamboos, wooden reapers,
wood posts, wall plates etc., including all operational, incidental and labour charges such as weigh batching, machine mixing, lifting of concrete manually, laying
vibrating, curing , overheads & contractors profit etc., complete but excluding cost of steel and its fabrication charges for finished item of work (APSS No. 402)
HIR-00040& LAB-
CSoR 40 Needle vibrator 40mm ( petrol ) 0.308 hours 38.20 1 hour
00352
HIR-00174 CSoR 40 Crew charges 0.308 hours 220.90 1 hour
Add MA on crew charges 0.20 213.88
MAT-00332,
M - 189(a),(b) Water(including for curing) 1.20 kl 116.00 1 kl
MAT-00333
Rate per 1 cum
A) BEAMS :
un supported height up to 3.66 m
Rate for other Floors F1 F2 F3 F4
Rate as above 5994.41 5994.41 5994.41 5994.41
Hire charges of centering and scaffolding 1458.00 1458.00 1458.00 1458.00
Labour , lift charges for scaffolding 1569.00 1726.00 1883.00 2040.00
Add for MAA @ 20% 313.80 345.20 376.60 408.00
Lift charges of materials(Manual) 0.00 173.28 346.56 519.83
Add for MAA @ 20% 0.00 34.66 69.31 103.97
Rate for 1 cum 9335.21 9731.54 10127.88 10524.21
Overheads&Contractors Profit @13.615% 1270.99 1324.95 1378.91 1432.87
Rate per 1 cum 10606.20 11056.49 11506.79 11957.08
Say 10606 11056 11507 11957
B) RCC SLABS :
a) Roof Slabs 125mm thick :
un supported height up to 3.66 m
Rate for Design mix M 25 0.125 Cum 5994.41 1 Cum
Supply and placing of the Design Mix Concrete M 25 grade corresponding to IS 456 with minimum cement content of 380 kgs per 1 cum of concrete using weig
/ mixer with 20mm size graded machine crushed hard granite metal (coarse aggregate - as per IS 383 - 1970 and IS 2386 Part 1 to Part 8) from approved quarry inclu
1 and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site, centering using steel scaffolding pipes , jack props , wall
plates , brackets , steel centering plates etc. including all operational, incidental and labour charges such as weigh batching, machine mixing, lifting of concrete
laying concrete, vibrating, curing , overheads & contractors profit etc., complete but excluding cost of steel and its fabrication charges for finished item of work (APSS N
A) BEAMS :
un supported height up to 4.27 m
Rate for other Floors F1
CIVIL DATA 2020-21 : Page-714
A) BEAMS :
un supported height up to 7.32 m
Rate for other Floors F1
Rate as above 5994.41
Hire charges of centering and scaffolding 2179.00
Extra staging (Hire) 2178.91
Labour , lift charges for scaffolding 2027.00
Extra staging (Labour) 2026.92
Add for MAA @ 20% 810.78
Lift charges of materials(Manual) 0.00
Add for MAA @ 20% 0.00
Rate for 1 cum 15217.02
Overheads&Contractors Profit @13.615% 2071.8
Rate per 1 cum 17288.82
Say 17289
Supply and placing of the Design Mix Concrete M 25 grade corresponding to IS 456 with cement content of 380 kgs per 1 cum of concrete using weigh b
mixer with 20mm size graded machine crushed hard granite metal (coarse aggregate - as per IS 383 - 1970 and IS 2386 Part 1 to Part 8) from approved quarry inclu
and conveyance of all materials like cement, fine aggregate (sand), coarse aggregate, water etc., to site, centering using casurina ballies , bamboos , wooden reapers ,
24 BLD-CSTN-3-19
wood posts , wall plates etc., for 60cm wide sun-shades 7.5cm thick at fixed end and 5cm thick at free end with an average thickness of 6.25cm including all op
incidental and labour charges such as weigh batching, machine mixing, lifting of concrete manually, laying concrete, curing, overheads & contractors profit complete
excluding cost of steel and its fabrication charges for finished item of work (APSS No. 402, 403 & 903)
A.MATERIALS :
Cement 380.00 Kgs 4220.00 1000 Kgs
20mm HBG graded metal 0.80 Cum 1759.31 1 Cum
MAT-00027 CSoR 27(a) Sand 0.40 Cum 1061.00 1 Cum
B.LABOUR :
LAB-00011 CSoR I -11 1st class Mason 0.067 Nos 630.00 1 Each
LAB-00091 CSoR II - 35 2nd class Mason 0.133 Nos 565.00 1 Each
LAB-00120,
CSoR III - 3,4 Mazdoor (both men&women) 3.077 Nos 525.00 1 Each
LAB-00121
Add for MAA @ 20% 0.20 1732.78
C.MACHINERY :
HIR-00009& LAB-
CSoR 9 Batching plant 0.50 cum 0.308 hours 233.80 1 hour
00325
HIR-00144 CSoR 9 Crew charges 0.308 hours 473.50 1 hour
Add MA on crew charges 0.20 145.84
MAT-00332,
M - 189(a),(b) Water(including for curing) 1.20 kl 116.00 1 kl
MAT-00333
Rate per 1 cum
Brick masonry for panel walls in superstructure with CM (1:8) prop: (Cement : Sand) using common burnt clay bricks of class as per Table- I of IS:1077-1
Modular or traditional size 23 x 11 x 7 cms from approved source having minimum crushing strength of 40 Kg/Sqcm. including cost and conveyance of all materials lik
25 BLD-CSTN-5-5
screened sand, bricks, water etc., to site, labour charges, like mixing cement mortar, scaffolding charges, constructing masonry, lift charges, curing, etc.,and ove
contractors profit complete for finished item of work. (APSS No. 501 & 504).
Unit : 1cum
A.MATERIALS :
Cement 36.00 Kgs 4220.00 1000 Kgs
MAT-00721 BMT-A.01 Common burnt clay bricks 23x11x7cms 512 Nos 7874.10 1000 Nos
MAT-00029 CSoR 28 Fine aggregate ( Sand ) 0.20 cu.m. 1156.00 1 cu.m.
B.LABOUR :
LAB-00011 CSoR I -11 1st class mason 0.24 Nos. 630.00 1 Each
LAB-00091 CSoR II - 35 2nd class mason 0.56 Nos. 565.00 1 Each
LAB-00120,
CSoR III - 3,4 Mazdoor (Unskilled) 1.89 Nos. 525.00 1 Each
LAB-00121
Add for MAA @ 20% 0.20 1459.85
water charges @ 1% 0.01 6166.48
Rate per 1 cum
a Up to basement
Rate as worked out above 1.00 Cum 6228.14 1 Cum
Overheads&Contractors Profit @13.615% 0.13615 6228.14
Rate per 1 cum
Say
b) Superstructure :
i) un supported height up to 3.66 m
Rate for other Floors F1 F2 F3 F4
Rate as worked out above 6228.14 6228.14 6228.14 6228.14
Hire charges for Access Scaffolding 46.87 46.87 46.87 46.87
Labour charges for scaffolding 367.91 526.87 685.74 844.65
Add for MAA @ 20% 73.58 105.37 137.15 168.93
Lift charges ( Page 131 of Std. Data ) 0.00 145.99 291.97 437.96
Add for MAA @ 20% 0.00 29.20 58.39 87.59
Rate per 1 cum 6716.51 7082.45 7448.27 7814.15
Overheads&Contractors Profit @13.615% 914.45 964.27 1014.08 1063.9
Rate per 1 cum 7630.96 8046.72 8462.35 8878.05
Say 7631 8047 8462 8878
CIVIL DATA 2020-21 : Page-718
Reinforced Brick Masonry for partition walls (11.0 cm thick) in CM (1:4) prop. (Cement : Sand) using common burnt clay bricks of class as per Table- I of IS:1
Non- Modular or traditional size 23 x 11 x 7 cms from approved source having minimum crushing strength of 40 Kg/Sq.cm and placing 2 Nos. of 6mm M.S plain rod
26 BLD-CSTN-5-12 third layer with free ends of the reinforcement pegged into mortar joints of main brick walls where applicable including cost and conveyance of all materials like cem
sand, bricks, water etc., to site, all operational, incidental charges such as labour charges for mixing cement mortar, scaffolding charges, constructing masonry, lift
curing, etc., and overheads & contractors profit but excluding cost of steel and its fabrication charges complete for finished item of work. (APSS No. of 501 & 509)
Unit - 10sqm
A.MATERIALS :
MAT-00721 BMT-A.01 Common burnt clay bricks 23x11x7cms 512 Nos. 7874.10 1000 Nos.
Cement 72.00 Kgs 4220.00 1000 Kgs
MAT-00029 CSoR 28 Fine aggregate ( Sand ) 0.21 cu.m. 1156.00 1 cu.m.
B.LABOUR :
LAB-00011 CSoR I -11 1st class mason 0.60 Nos. 630.00 1 Each
LAB-00091 CSoR II - 35 2nd class mason 0.60 Nos. 565.00 1 Each
LAB-00120,
CSoR III - 3,4 Mazdoor (Unskilled) 2.75 Nos. 525.00 1 Each
LAB-00121
Add for MAA @ 20% 0.20 2160.75
water charges @ 1% 0.01 7171.04
Rate per 10 sqm
Rate per 1 sqm
Masonry work in CM(1:6) prop (Cement : Sand) in superstructure with fly ash cement / lime solid blocks of size 290mm x 225mm x 140mm from approved sour
minimum crushing strength of 50 Kg/Sqcm. including cost and conveyance of all materials like cement, sand, fly ash cement / lime solid blocks, water etc., to si
27 BLD-CSTN-5-17
charges, like mixing cement mortar, scaffolding charges, constructing masonry, lift charges, curing, overheads and contrctor profit etc., complete for finished item of wo
No. 501 & 504).
Unit = 1 Cum
A.MATERIALS
MAT-00756 BMT-A-10 No of blocks required for 1 Cum of Masonry 110 Nos 37139.34 1000 Nos
Cement 24.00 Kgs 4220.00 1000 Kgs
MAT-00029 CSoR 28 Fine aggregate ( Sand ) 0.10 cu.m. 1156.00 1 cu.m.
B .LABOUR
LAB-00011 CSoR I -11 1st class mason 0.24 Nos. 630.00 1 Each
LAB-00091 CSoR II - 35 2nd class mason 0.56 Nos. 565.00 1 Each
LAB-00120,
CSoR III - 3,4 Mazdoor (Unskilled) 1.89 Nos. 525.00 1 Each
LAB-00121
Add for MAA @ 20% 0.20 1459.85
water charges @ 1% 0.01 6054.03
Rate per 1 cum
b) Superstructure :
i) un supported height up to 3.66 m
Rate for other Floors F1 F2 F3 F4
Rate as worked out above 6114.57 6114.57 6114.57 6114.57
Hire charges for Access Scaffolding 47.91 47.91 47.91 47.91
Labour charges for scaffolding 376.09 538.58 700.98 863.42
Add for MAA @ 20% 75.22 107.72 140.20 172.68
Lift charges ( Page 131 of Std. Data ) 0.00 145.99 291.97 437.96
Add for MAA @ 20% 0.00 29.20 58.39 87.59
6613.79 6983.96 7354.02 7724.13
Overheads&Contractors Profit @13.615% 900.47 950.87 1001.25 1051.64
Rate per 1 cum 7514.26 7934.83 8355.27 8775.77
Say 7514 7935 8355 8776
CIVIL DATA 2020-21 : Page-720
Reinforced Masonry for partition walls (100 mm thick) in CM (1:4) prop. (Cement : Sand) using fly ash cement / lime solid blocks of size 290mm x 100mm
having minimum compressive strength of 50 Kg/Sq.cmand placing 2 Nos. of 6mm M.S plain rods in every third layer with free ends of the reinforcement pegged into mo
28 BLD-CSTN-5-12 of main brick walls where applicable including cost and conveyance of all materials like cement, steel, sand, fly ash cement / lime solid blocks, water etc., to site, all op
incidental charges such as labour charges for mixing cement mortar, scaffolding charges, constructing masonry, lift charges, curing, etc., and overheads & contractors
excluding cost of steel and its fabrication charges complete for finished item of work. (APSS No. of 509)
Unit - 10sqm
A.MATERIALS :
MAT-00759 BMT-A-13 Flyash lime solid blocks 247 Nos. 17173.04 1000 Nos.
Cement 36.00 Kgs 4220.00 1000 Kgs
MAT-00029 CSoR 28 Fine aggregate ( Sand ) 0.10 cu.m. 1156.00 1 cu.m.
B.LABOUR :
LAB-00011 CSoR I -11 1st class mason 0.60 Nos. 630.00 1 Each
LAB-00091 CSoR II - 35 2nd class mason 0.60 Nos. 565.00 1 Each
LAB-00120,
CSoR III - 3,4 Mazdoor (Unskilled) 2.75 Nos. 525.00 1 Each
LAB-00121
Add for MAA @ 20% 0.20 2160.75
water charges @ 1% 0.01 7102.16
Rate per 10 sqm
Rate per 1 sqm
Plain Cement Concrete (1:3:6) nominal mix using 20mm size graded machine crushed hard granite metal (coarse aggregate - as per IS 383 - 1970 and IS 2386 Par
BLD-CSTN-3-10 8) from approved quarry using concrete Mixer 10 / 7 cft (0.2 / 0.8 cum) capacity including cost and conveyance of all materials like cement, fine aggregate(sand
29
& 11 aggregate, water etc. to site including all charges for machine mixing, hire charges of concrete mixer, centering charges, laying concrete in position, curing etc., & lift
and overheads & contractors profit for bed blocks & hold fasts for finished item of work. (APSS No. 402)
Unit : 1cum
A.MATERIALS :
HBG 20mm size metal 0.90 Cum 1759.31 1 Cum
MAT-00027 CSoR 27(a) Sand 0.45 Cum 1061.00 1 Cum
Cement 220.00 Kgs 4220.00 1 MT
MAT-00332,
M - 189(a),(b) Water ( including for curing ) 1.20 Kl 116.00 1 Kl
MAT-00333
B.MACHINERY :
HIR-00016& LAB-
CSoR 16 Concrete Mixer 10 / 7 cft (0.2 / 0.8 cum)capacity 1.00 hour 188.10 1 hour
00329
HIR-00150 CSoR 16 Crew Charges 1.00 hour 306.80 1 hour
Add MA on crew charges 0.20 306.80
C.LABOUR :
LAB-00011 CSoR I -11 1st class mason 0.10 Nos. 630.00 1 Each
LAB-00120,
CSoR III - 3,4 Mazdoor (Unskilled) 1.39 Nos. 525.00 1 Each
LAB-00121
Add for MAA @ 20% 0.20 792.75
Rate per 1 cum
Plain Cement Concrete (1:2:4) using 20mm size graded machine crushed hard granite metal (coarse aggregate - as per IS 383 - 1970 and IS 2386 Part 1 to Pa
approved quarry using concrete Mixer 10 / 7 cft (0.2 / 0.8 cum) capacity including cost and conveyance of all materials like cement, fine aggregate(sand), coarse a
30 BLD-CSTN-3-11
water etc. to site including all charges for machine mixing, hire charges of concrete mixer, laying concrete in position, curing etc., & lift charges , and overheads & c
profit for septic tank bed, in sunken slabs for finished item of work. (APSS No. 402)
Unit : 1cum
A.MATERIALS :
HBG 20mm size metal 0.90 Cum 1759.31 1 Cum
MAT-00027 CSoR 27(a) Sand 0.45 Cum 1061.00 1 Cum
Cement 330.00 Kgs 4220.00 1 MT
MAT-00332,
M - 189(a),(b) Water ( including for curing ) 1.20 Kl 116.00 1 Kl
MAT-00333
B.MACHINERY :
HIR-00016& LAB-
CSoR 16 Concrete Mixer 10 / 7 cft (0.2 / 0.8 cum)capacity 1.00 hour 188.10 1 hour
00329
HIR-00150 CSoR 16 Crew Charges 1.00 hour 306.80 1 hour
Add MA on crew charges 0.20 306.80
C.LABOUR :
LAB-00011 CSoR I -11 1st class mason 0.10 Nos. 630.00 1 Each
LAB-00120,
CSoR III - 3,4 Mazdoor (Unskilled) 1.39 Nos. 525.00 1 Each
LAB-00121
Add for MAA @ 20% 0.20 792.75
Rate per 1 cum
Plain Cement Concrete M 20 nominal mix using 20mm size graded machine crushed hard granite metal (coarse aggregate - as per IS 383 - 1970 and IS 2386 Part 1
from approved quarry using concrete Mixer 10 / 7 cft (0.2 / 0.8 cum) capacity including cost and conveyance of all materials like cement, fine aggregate(sand), coarse a
31 BLD-CSTN-3-11
water etc. to site including all charges centering, labour charges such as weigh batching, machine mixing, hire charges of concrete mixer, centering charges, laying c
position, curing etc., & lift charges , and overheads & contractors profit for steps for finished item of work. (APSS No. 402)
Unit : 1cum
A.MATERIALS :
HBG 20mm size metal 0.90 Cum 1759.31 1 Cum
MAT-00027 CSoR 27(a) Sand 0.45 Cum 1061.00 1 Cum
Cement 330.00 Kgs 4220.00 1000 Kgs
MAT-00332,
M - 189(a),(b) Water ( including for curing ) 1.20 Kl 116.00 1 Kl
MAT-00333
B.MACHINERY :
HIR-00016& LAB-
CSoR 16 Concrete Mixer 10 / 7 cft (0.2 / 0.8 cum)capacity 1.00 hour 188.10 1 hour
00329
HIR-00150 CSoR 16 Crew Charges 1.00 hour 306.80 1 hour
Add MA on crew charges 0.20 306.80
HIR-00040& LAB-
CSoR 40 Needle vibrator 40mm ( petrol ) 1.00 hours 38.20 1 hour
00352
HIR-00174 CSoR 40 Crew charges 1.00 hours 220.90 1 hour
Add MA on crew charges 0.20 220.90
C.LABOUR :
LAB-00011 CSoR I -11 1st class mason 0.100 Nos. 630.00 1 Each
LAB-00120,
CSoR III - 3,4 Mazdoor (Unskilled) 1.390 Nos. 525.00 1 Each
LAB-00121
Add for MAA @ 20% 0.20 792.75
Rate per 1 cum
Reinforced Cement Concrete M 20 nominal mix using 12mm size hard granite machine crushed graded metal (coarse aggregate - as per IS 383 - 1970 and IS 2386
Part 8) from approved quarry, using a minimum quantity of 330 kgs. of cement per 1 cum of concrete using concrete Mixer 10 / 7 cft (0.2 / 0.8 cum) capacity including
32 BLD-CSTN-3-13 - Aconveyance of all materials like cement, fine aggregate (Sand), coarse aggregate, water etc., to site including centering, shuttering, labour charges such as weigh
machine mixing, hire charges of concrete mixer, laying concrete, lift charges, curing etc., and overheads & contractors profit complete for finished item of work (APSS N
403) for sill slabs.
A.MATERIALS :
Cement 330.00 Kgs 4220.00 1000 Kgs
12mm HBG graded metal 0.90 Cum 1527.30 1 Cum
MAT-00027 CSoR 27(a) Sand 0.45 Cum 1061.00 1 Cum
B.LABOUR :
LAB-00011 CSoR I -11 1st class Mason 0.133 Nos 630.00 1 Each
LAB-00091 CSoR II - 35 2nd class Mason 0.267 Nos 565.00 1 Each
LAB-00120,
CSoR III - 3,4 Mazdoor (both Men & Women) 3.60 Nos 525.00 1 Each
LAB-00121
Add for MAA @ 20% 0.20 2124.65
C.MACHINERY :
HIR-00016& LAB-
CSoR 16 Concrete Mixer 10 / 7 cft (0.2 / 0.8 cum)capacity 1.00 hour 188.10 1 hour
00329
HIR-00150 CSoR 16 Crew Charges 1.00 hour 306.80 1 hour
Add MA on crew charges 0.20 306.80
MAT-00332,
M - 189(a),(b) Water(including for curing) 1.20 kl 116.00 1 kl
MAT-00333
Basic cost per 1 cum
Reinforced Cement Concrete M 20 nominal mix using 12mm size hard granite machine crushed graded metal (coarse aggregate - as per IS 383 - 1970 and IS 2386
Part 8) from approved quarry, using a minimum quantity of 330 kgs. of cement per 1 cum of concrete using concrete Mixer 10 / 7 cft (0.2 / 0.8 cum) capacity including
33 BLD-CSTN-3-13 conveyance of all materials like cement, fine aggregate (Sand), coarse aggregate, water etc., to site including centering, shuttering, labour charges such as weigh
machine mixing, hire charges of concrete mixer, laying concrete, lift charges, curing etc., and overheads & contractors profit complete for finished item of work (APSS N
403) for platforms and shelves.
A.MATERIALS :
Cement 330.00 Kgs 4220.00 1000 Kgs
12mm HBG graded metal 0.90 Cum 1527.30 1 Cum
MAT-00027 CSoR 27(a) Sand 0.45 Cum 1061.00 1 Cum
B.LABOUR :
LAB-00011 CSoR I -11 1st class Mason 0.067 Nos 630.00 1 Each
LAB-00091 CSoR II - 35 2nd class Mason 0.133 Nos 565.00 1 Each
LAB-00120,
CSoR III - 3,4 Mazdoor (both men&women) 2.500 Nos 525.00 1 Each
LAB-00121
Add for MAA @ 20% 0.20 1429.86
C.MACHINERY :
HIR-00016& LAB-
CSoR 16 Concrete Mixer 10 / 7 cft (0.2 / 0.8 cum)capacity 1.00 hour 188.10 1 hour
00329
HIR-00150 CSoR 16 Crew Charges 1.00 hour 306.80 1 hour
Add MA on crew charges 0.20 306.80
MAT-00332,
M - 189(a),(b) Water(including for curing) 1.20 kl 116.00 1 kl
MAT-00333
Basic cost per 1 cum
Providing Thermo Mechanically Treated (TMT) (Fe 500 / Fe 500 D grade as per IS 1786-1979) of different diameters for RCC works including labour ch
BLD-CSTN-4.2
straightening, cutting, bending to required sizes and shapes, placing in position with cover blocks of approved materials and size and tying and lap-splicing with bindi
& Amendment
34 18 SWG, forming grills for reinforcement work as per approved designs and drawings, including cost and conveyance of steel bars, including all wastages such as
in SoR 2011-12
couplings, chairs, spacer bars including cost and conveyance of binding wire, cover blocks and all incidental, operational, labour charges such as cutting, bending,
page No. 392
position, tying etc., and overheads & contractors profit complete for finished item of work.( APSS No.126)
Unit - 1 MT
a) Material
TMT bars including 5% for overlaps and wastage 1.05 MT 64000.00 1 MT
MAT-00003 CSoR 3 Binding wire 6.00 Kgs 70.00 1 Kgs
Labour for cutting , bending , shifting to site , tying and
b)
placing in position
LAB-00001 CSoR I - 1 1st class Blacksmith / Barbender 3.00 Nos. 750.00 1 Each
LAB-00002 CSoR I - 2 2nd class Blacksmith / Barbender 7.00 Nos. 590.00 1 Each
LAB-00120, LAB-
CSoR III - 3,4 Mazdoor(Unskilled) 10.00 Nos. 525.00 1 Each
00121
Add for MAA @ 20% 0.20 11630.00
Providing Mild steel (MS) steel bars (Fe 250 grade as per IS 432) of different diameters including labour charges for straightening, cutting, bending to required
BLD-CSTN-4.2
shapes, placing in position with cover blocks of approved materials and size and tying and lap-splicing with binding wire of 18 SWG, forming grills for reinforcement wo
& Amendment
35 approved designs and drawings, including cost and conveyance of steel bars, including all wastages such as overlaps, couplings, chairs, spacer bars including
in SoR 2011-12
conveyance of binding wire, cover blocks and all incidental, operational, labour charges such as cutting, bending, placing in position, tying etc., and overheads & co
page No. 392
profit complete for finished item of work.( APSS No.126)
Unit - 1 MT
a) Material
Mild steel bars including 5% for overlaps and wastage 1.05 MT 63000.00 1 MT
MAT-00003 CSoR 3 Binding wire 6.00 Kgs 70.00 1 Kgs
Labour for cutting, bending, shifting to site, tying and
b)
placing in position
LAB-00001 CSoR I - 1 1st class Blacksmith / Barbender 3.00 Nos. 750.00 1 Each
LAB-00002 CSoR I - 2 2nd class Blacksmith / Barbender 7.00 Nos. 590.00 1 Each
LAB-00120,
CSoR III - 3,4 Mazdoor(Unskilled) 10.00 Nos. 525.00 1 Each
LAB-00121
Add for MAA @ 20% 0.20 11630.00
As per Ornamental ceiling plastering 12mm thick single coat in CM (1:5) using screened sand including cost and conveyance of all materials like cement, sand, water e
36 amendment in and all operational, incidental charges on materials and including cost of all labour charges for mixing mortar, finishing, curing as directed by Engineer-in-charge
SoR 2016-17 overheads & contractors profit complete for finished item of work.(SS 901,903 & 904)
Unit : 10 sqm
A.MATERIALS :
Cement 43.20 Kgs 4220.00 1000 Kgs
MAT-00029 CSoR 28 Fine aggregate ( Sand ) 0.15 cu.m. 1156.00 1 cu.m.
B.LABOUR :
LAB-00001 CSoR I - 1 1st Class Mason 0.45 Nos. 630.00 1 Each
LAB-00002 CSoR I - 2 2nd Class Mason 1.05 Nos. 565.00 1 Each
LAB-00120, LAB-
CSoR III - 3,4 Mazdoor (Unskilled) 2.80 Nos. 525.00 1 Each
00121
Add for MAA @ 20% 0.20 2346.75
water charges @ 1% 0.01 3171.80
Rate per 10 sqm
Rate per 1 sqm
Plastering 12mm thick in two coats using screened sand with base coat of 8mm thick in CM (1:6) and top coat of 4mm thick in CM (1:4) with dubara sponge finishing
cost and conveyance of all materials like cement, sand, water etc., to site and all operational, incidental charges on materials and including cost of all labour charges
37 BLD-CSTN-8-10
mortar, finishing, scaffolding, lift charges, curing, including cutting grooves as directed by Engineer - in - charge etc., and overheads & contractors profit complete fo
item of work. (SS 901,903 & 904)
Unit : 10 sqm
A.MATERIALS :
Base coat in CM(1:6) , 8mm thick
Cement 26.40 Kgs 4220.00 1000 Kgs
MAT-00029 CSoR 28 Fine aggregate (Sand) 0.11 Cum 1156.00 1 Cum
Top coat in CM(1:4) , 4mm thick
Cement 14.40 Kgs 4220.00 1000 Kgs
MAT-00029 CSoR 28 Fine aggregate (Sand) 0.04 Cum 1156.00 1 Cum
B.LABOUR :
LAB-00001 CSoR I - 1 1st Class Mason 0.63 Nos. 630.00 1 Each
LAB-00002 CSoR I - 2 2nd Class Mason 1.47 Nos. 565.00 1 Each
LAB-00120, LAB-
CSoR III - 3,4 Mazdoor (Unskilled) 3.90 Nos. 525.00 1 Each
00121
Add for MAA @ 20% 0.20 3274.95
water charges @ 1% 0.01 4275.52
Rate per 10 sqm
Rate per 1 sqm
As per Plastering 12mm thick single coat in CM(1:5) using screened sand including cost and conveyance of all materials like cement, sand, water etc., to site and all op
38 amendment in incidental charges on materials and including cost of all labour charges for mixing mortar, finishing, curing as directed by Engineer-in-charge etc., and overheads & c
SoR 2016-17 profit complete for finished item of work (SS 901,903 & 904)
Unit : 10 sqm
A.MATERIALS :
Cement 43.20 Kgs 4220.00 1000 Kgs
MAT-00029 CSoR 28 Fine aggregate ( Sand ) 0.15 cu.m. 1156.00 1 cu.m.
B.LABOUR :
LAB-00001 CSoR I - 1 1st Class Mason 0.45 Nos. 630.00 1 Each
LAB-00002 CSoR I - 2 2nd Class Mason 1.05 Nos. 565.00 1 Each
LAB-00120,
CSoR III - 3,4 Mazdoor (Unskilled) 2.80 Nos. 525.00 1 Each
LAB-00121
Add for MAA @ 20% 0.20 2346.75
water charges @ 1% 0.01 3171.80
Rate per 10 sqm
Rate per 1 sqm
a) up to basement
Rate as worked out above 1.00 sqm 320.35 1 sqm
Overheads&Contractors Profit @13.615% 0.13615 320.35
Rate per 1 sqm
Say
b) Superstructure
Rate for other Floors F1 F2 F3 F4
Rate as worked out above 320.35 320.35 320.35 320.35
Hire charges for Access Scaffolding 1.08 1.08 1.08 1.08
Labour charges for scaffolding 8.47 12.12 15.77 19.43
Add for MAA @ 20% 1.69 2.42 3.15 3.89
Lift charges ( Page 131 of Std. Data ) 0.00 32.75 65.50 98.25
Add for MAA @ 20% 0.00 6.55 13.10 19.65
Rate per 1 sqm 331.59 375.27 418.95 462.65
Overheads&Contractors Profit @13.615% 45.15 51.09 57.04 62.99
Rate per 1 sqm 376.74 426.36 475.99 525.64
Say 377 426 476 526
CIVIL DATA 2020-21 : Page-732
Plastering 20mm thick in two coats using screened sand with base coat of 16mm thick in CM(1:6) and top coat of 4mm thick in CM(1:4) with dubara sponge finishing
cost and conveyance of all materials like cement, sand, water etc., to site and all operational, incidental charges on materials and including cost of all labour charges
39 BLD-CSTN-8-9
mortar, finishing, scaffolding, lift charges, curing, including cutting grooves as directed by Engineer-in-charge etc., and overheads & contractors profit complete for fini
of work .(SS 901,903 & 904)
Unit : 10 sqm
A.MATERIALS :
Base coat in CM(1:6) , 16mm thick
Cement 43.20 Kgs 4220.00 1000 Kgs
MAT-00029 CSoR 28 Fine aggregate (Sand) 0.18 Cum 1156.00 1 Cum
Top coat in CM(1:4) , 4mm thick
Cement 14.40 Kgs 4220.00 1000 Kgs
MAT-00029 CSoR 28 Fine aggregate (Sand) 0.04 Cum 1156.00 1 Cum
B.LABOUR :
LAB-00001 CSoR I - 1 1st Class Mason 0.63 Nos. 630.00 1 Each
LAB-00002 CSoR I - 2 2nd Class Mason 1.47 Nos. 565.00 1 Each
LAB-00120,
CSoR III - 3,4 Mazdoor (Unskilled) 3.90 Nos. 525.00 1 Each
LAB-00121
Add for MAA @ 20% 0.20 3274.95
water charges @ 1% 0.01 4427.33
Rate per 10 sqm
Rate per 1 sqm
As per Plastering 20mm thick single coat in CM(1:5) using screened sand including cost and conveyance of all materials like cement, sand, water etc., to site and all op
40 amendment in incidental charges on materials and including cost of all labour charges for mixing mortar, finishing, curing as directed by Engineer-in-charge etc., and overheads & c
SoR 2016-17 profit complete for finished item of work for basement. (SS 901,903 & 904)
Unit : 10 sqm
A.MATERIALS :
Cement 60.48 Kgs 4220.00 1000 Kgs
MAT-00029 CSoR 28 Fine aggregate (Sand) 0.21 Cum 1156.00 1 Cum
B.LABOUR :
LAB-00001 CSoR I - 1 1st Class Mason 0.45 Nos. 630.00 1 Each
LAB-00002 CSoR I - 2 2nd Class Mason 1.05 Nos. 565.00 1 Each
LAB-00120,
CSoR III - 3,4 Mazdoor (Unskilled) 2.80 Nos. 525.00 1 Each
LAB-00121
Add for MAA @ 20% 0.20 2346.75
water charges @ 1% 0.01 3314.09
Rate per 10 sqm
Rate per 1 sqm
Overheads&Contractors Profit @13.615% 0.13615 334.72
Rate per 1 sqm
Say Say
CIVIL DATA 2020-21 : Page-734
Providing impervious coat to exposed RCC roof slab surfaces to required slopes with CM (1:3) prop. using screened sand 20mm thick (average) mixed with integr
water proofing admixture confirming to IS: 2645-2003 manufactured by reputed manufacturers as approved by Engineer-in-charge at 100ml per one bag of cement, laid
41 BLD-CSTN-10-25slab when it is green, finished smooth with a floating coat of neat cement and thread lining at regular intervals of 45cmx45cm including cost and conveyance of all mat
cement, sand, water proofing compound, water etc., to site, operational, incidental, and labour charges for mixing mortar, laying, lift charges, rendering smooth and thre
curing including rounding off junctions of wall and slab etc., and overheads & contractors profit complete for finished item of work. (APSS No. 901 & 903).
Unit : 10 sqm
A.MATERIALS :
Cement 100.80 Kgs 4220.00 1000 Kgs
MAT-00029 CSoR 28 Fine aggregate (Sand) 0.21 Cum 1156.00 1 Cum
MAT-05372 BMT-H.85 Integral cement water proofing admixture 0.20 Ltrs 205.00 1.00 Ltrs
B.LABOUR :
LAB-00001 CSoR I - 1 1st Class Mason 0.66 Nos. 630.00 1 Each
LAB-00002 CSoR I - 2 2nd Class Mason 1.54 Nos. 565.00 1 Each
LAB-00120,
CSoR III - 3,4 Mazdoor (Unskilled) 3.70 Nos. 525.00 1 Each
LAB-00121
Add for MAA @ 20% 0.20 3228.40
water charges @ 1% 0.01 4583.22
Rate per 10 sqm
Providing impervious coat to exposed RCC roof slab surfaces of sump , sump side wall,sump bottom slab,in side of septic tank , in sunken slabs etc. to
slopes with CM (1:3) prop. using screened sand 12mm thick mixed with integral cement water proofing admixture confirming to IS: 2645-2003 manufactured b
As per
manufacturers as approved by Engineer-in-charge at 100ml per one bag of cement, laid over roof slab when it is green, finished smooth with a floating coat of neat ce
42 amendment in
thread lining at regular intervals of 45cmx45cm where ever necessary including cost and conveyance of all materials like cement, sand, water proofing compound, wat
SoR 2016-17
site, operational, incidental, and labour charges for mixing mortar, laying, lift charges, rendering smooth and thread lining, curing including rounding off junctions of wal
etc., and overheads & contractors profit complete for finished item of work. (APSS No. 901 & 903).
A.MATERIALS :
Cement 72.00 Kgs 4220.00 1000 Kgs
MAT-00029 CSoR 28 Fine aggregate (Sand) 0.15 Cum 1156.00 1 Cum
MAT-05372 BMT-H.85 Integral cement water proofing admixture 0.144 Ltrs 205.00 1.00 Ltrs
B.LABOUR :
LAB-00001 CSoR I - 1 1st Class Mason 0.45 Nos. 630.00 1 Each
LAB-00002 CSoR I - 2 2nd Class Mason 1.05 Nos. 565.00 1 Each
LAB-00120,
CSoR III - 3,4 Mazdoor (Unskilled) 2.80 Nos. 525.00 1 Each
LAB-00121
Add for MAA @ 20% 0.20 2346.75
water charges @ 1% 0.01 3322.86
Rate per 10 sqm
RCM facia 50mm thick in CM(1:3) using screened sand for drop walls, fins with rabbit wire mesh & nomianl reinforcement as directred by Engineer - In - Charge wi
sponge finishing,including cost and conveyance of all materials to site, operationals &incidental,cost and conveyance of cement,wire mesh,water
43 BLD-CSTN-8-11
site,centering,scaffolding and form work,lift charges etc., and overheads & contractors profit complete for finished item of work but excluding cost of steel and its f
charges for finished item of work(APSS NO.403&903)
Unit : 10 sqm
A)MATERIALS
MAT-00894 BMT-F.28 Rabbit wire mesh 13.30 sqm 21.00 1 sqm
Cement for CM(1:3) 25mm thick 120.00 Kgs 4220.00 1000 Kgs
MAT-00029 CSoR 28 Fine aggregate (Sand) for CM(1:3) 25mm thick 0.26 cu.m. 1156.00 1 cu.m.
Dry Cement for lumps 50.00 Kgs 4220.00 1000 Kgs
12mm plastering 2 coats in CM(1:3) both sides
Cement for 2 coats platering in CM(1:3) 144.00 Kgs 4220.00 1000 Kgs
MAT-00029 CSoR 28 Fine aggregate (Sand) for CM(1:3) 25mm thick 0.30 cu.m. 1156.00 1 cu.m.
Flooring with polished shahabad / Tandur stone slabs of 15 mm to 18 mm thick set over a base coat of CM (1:8) , 12mm thick using screened sand over alread
bed / RCC roof slab including neat cement slurry of honey like consistency spread @ 3.3 Kgs per sqm and jointed with neat cement to full depth including cost and co
44 BLD-CSTN-9-1
of all materials like cement, sand, water, flooring stones etc. complete including all labour charges like dressing of flooring stones to the required size, mixing of ceme
laying, lift charges , cost of base coat, water charges etc., and overheads & contractors profit complete for finished item of work. (APSS No.703 & 701)
Unit = 10 sqm.
A. MATERIALS:
MAT-00772 BMT-B-05 Polished shahabad stone 15 to 18mm thick 11.00 sqm 2053.39 10 sqm
Cement for CM (1:8) proportion for base coat 21.60 Kgs 4220.00 1000 Kgs
Cement for slurry 33.00 Kgs 4220.00 1000 Kgs
Cement for pointing 20.00 Kgs 4220.00 1000 Kgs
MAT-00029 CSoR 28 Sand for CM(1:8) 0.12 Cum 1156.00 1 Cum
B .LABOUR
LAB-00001 CSoR I - 1 Mason 1st class 3.10 Nos 630.00 1 Each
LAB-00002 CSoR I - 2 Mason 2nd class 1.10 Nos 565.00 1 Each
LAB-00120,
CSoR III - 3,4 Mazdoor(un skilled) 0.86 Nos 525.00 1 Each
LAB-00121
Add for MAA @ 20% 0.20 3026.00
Add water charges 1% 0.01 6343.46
Rate for 10 sqm
Flooring with Polished black Kadapa slabs minimum of 15 mm thick of size 0.457m x 0.457m set over a base coat of CM (1:8) , 12mm thick using screened
already laid CC bed / RCC roof slab including neat cement slurry of honey like consistency spread @ 3.3 Kgs per sqm and jointed with neat cement to full depth inclu
45 BLD-CSTN-9-1
and conveyance of all materials like cement, sand, water, flooring stones etc. complete including all labour charges like dressing of flooring stones to the required size,
cement mortar, laying, lift charges , cost of base coat, water charges etc., and overheads & contractors profit complete for finished item of work. (APSS No.703 & 701)
Unit = 10 sqm.
A. MATERIALS:
MAT-00773 BMT-B-06 Polished black Kadapa slabs minimum of 15mm thick 11.00 sqm 1889.44 10 sqm
Cement for CM (1:8) proportion for base coat 21.60 Kgs 4220.00 1000 Kgs
Cement for slurry 33.00 Kgs 4220.00 1000 Kgs
Cement for pointing 20.00 Kgs 4220.00 1000 Kgs
MAT-00029 CSoR 28 Sand for CM(1:8) 0.12 Cum 1156.00 1 Cum
B .LABOUR
LAB-00001 CSoR I - 1 Mason 1st class 3.10 Nos 630.00 1 Each
LAB-00002 CSoR I - 2 Mason 2nd class 1.10 Nos 565.00 1 Each
LAB-00120,
CSoR III - 3,4 Mazdoor(un skilled) 0.86 Nos 525.00 1 Each
LAB-00121
Add for MAA @ 20% 0.20 3026.00
Add water charges 1% 0.01 6163.12
Rate for 10 sqm
Flooring with non-skid red or white full body Ceramic floor tiles of size 300 mm x 300 mm and thickness between 7-8 mm 1st quality conforming to IS:13711,
IS:13630 (Parts 1 to 15) of any colour and finish in all shades and designs as approved by Engineer-in-charge, set over base coat of cement mortar (1:8), 12mm th
46 BLD-CSTN-9-6 screened sand over CC bed already laid or RCC roof slab, including neat cement slurry of honey like consistency spread @ 3.3 Kgs per sqm & jointed neatly with whi
paste to full depth mixed with pigment of matching shade, including cost of all materials like cement, screened sand , water and tiles etc., and overheads & contrac
complete for finished item of work. (APSS No.701 & 707)
Unit = 10 sqm.
A. MATERIALS:
MAT-00785 BMT-C.01 Ceramic tiles 7 to 8mm thick (300mm x 300mm) 10.50 sqm 370.00 1 sqm
Cement for CM(1:8) proportion for base coat 21.60 Kgs 4220.00 1000 Kgs
Cement for slurry 33.00 Kgs 4220.00 1000 Kgs
MAT-01638 BMS-W.68 White Cement 2.00 Kgs 31.00 1 Kg
MAT-00029 CSoR 28 Sand for CM(1:8) 0.12 Cum 1156.00 1 Cum
B .LABOUR
LAB-00001 CSoR I - 1 Mason 1st class 0.96 Nos 630.00 1 Each
LAB-00002 CSoR I - 2 Mason 2nd class 2.24 Nos 565.00 1 Each
LAB-00120,
CSoR III - 3,4 Mazdoor(un skilled) 3.30 Nos 525.00 1 Each
LAB-00121
Add for MAA @ 20% 0.20 3602.90
Add water charges 1% 0.01 8639.61
Rate for 10 sqm
Flooring with soluble salt porcelain vitrified tiles screen printed and polished of size 600 x 600 mm and thickness between 8-10 mm 1st quality conforming to
IS:13712, IS:13630 (Parts 1 to 15) of any colour and finish in all shades and designs with borders and design as per the approved flooring pattern as directed by the En
-Charge, laying tiles using spacers of 2mm thick, set over a base coat of CM (1:8) prop. 12mm thick using screened sand over CC bed already laid or RCC r
47 BLD-CSTN-9-5 including neat cement slurry of honey like consistancy spread @ 3.3 kgs per sqm. and jointed neately with white cement paste to full depth mixed with pigment of
shade including cost and conveyance of all materials like cement, sand, water, tiles, white cement etc., to site (excluding cost of C.C. bed) including cost of base
all labour charges for mixing of cement mortar, laying tiles to required slope as directed by the Engineer- in-charge etc.,and overheads & contractors profit com
finished item of work. (APSS No.701 & 707)
Unit = 10 sqm.
A. MATERIALS:
CIVIL DATA 2020-21 : Page-740
MAT-00790 BMT-C.06 Vitrified tiles 8 to 10mm thick of size 600mm x 600mm 10.50 sqm 425.00 1 sqm
Cement for CM(1:8)proportion for base coat 21.60 Kgs 4220.00 1000 Kgs
Cement for slurry 33.00 Kgs 4220.00 1000 Kgs
MAT-01638 BMS-W.68 White Cement 6.00 Kgs 31.00 1 Kg
MAT-00029 CSoR 28 Sand for CM(1:8) 0.12 Cum 1156.00 1 Cum
B .LABOUR
LAB-00001 CSoR I - 1 Mason 1st class 0.96 Nos 630.00 1 Each
LAB-00002 CSoR I - 2 Mason 2nd class 2.24 Nos 565.00 1 Each
LAB-00120,
CSoR III - 3,4 Mazdoor(un skilled) 3.30 Nos 525.00 1 Each
LAB-00121
Add for MAA @ 20% 0.20 3602.90
Add water charges 1% 0.01 9341.11
Rate for 10 sqm
Flooring with non-skid Double charged / multi charged stain free full body porcelain vitrified tiles with double layer pigment of size 600 x 600 mm and
between 8-10 mm 1st quality conforming to IS:13711, IS:13712, IS:13630 (Parts 1 to 15) of any colour and finish in all shades and designs with borders and design a
approved flooring pattern as directed by the Engineer-In -Charge, laying tiles using spacers of 2mm thick, set over a base coat of CM (1:8) prop. 12mm thick using
48 BLD-CSTN-9-5 sand over CC bed already laid or RCC roof slab , including neat cement slurry of honey like consistancy spread @ 3.3 kgs per sqm. and jointed neately with whit
paste to full depth mixed with pigment of matching shade including cost and conveyance of all materials like cement, sand, water, tiles, white cement etc., to site (
cost of C.C. bed) including cost of base coat and all labour charges for mixing of cement mortar, laying tiles to required slope as directed by the Engineer- i
etc.,and overheads & contractors profit complete for finished item of work. (APSS No.701 & 707)
Unit = 10 sqm.
A. MATERIALS:
MAT-00793 BMT-C.09 Vitrified tiles 8 to 10mm thick of size 600mm x 600mm 10.50 sqm 612.00 1 sqm
Cement for CM(1:8)proportion for base coat 21.60 Kgs 4220.00 1000 Kgs
Cement for slurry 33.00 Kgs 4220.00 1000 Kgs
MAT-01638 BMS-W.68 White Cement 6.00 Kgs 31.00 1 Kg
MAT-00029 CSoR 28 Sand for CM(1:8) 0.12 Cum 1156.00 1 Cum
B .LABOUR
LAB-00001 CSoR I - 1 Mason 1st class 0.96 Nos 630.00 1 Each
CIVIL DATA 2020-21 : Page-741
Providing window sills with 16 mm to 18 mm thick high polished granite stone slabs black colour as approved by the Engineer-in-Charge set over base coat
mortar (1:8) , 20mm thick using screened sand over CC bed already laid including neat grey cement slurry of honey like consistency spread @ 3.3 Kg per sqm and join
49 BLD-CSTN-9-7 with white cement paste mixed with pigment of matching shade to full depth including cost and conveyance of all materials like cement , sand , water , granite slabs etc
site and all operational, incidental labour & lift charges, half rounding the edge , polishing charges, cost of base coat and overheads & contractors profit complete for fini
of work (S.S.701 & special)
Unit = 10 sqm.
A. MATERIALS:
MAT-00778 BMT-B-11 High polished granite slabs black 16 to 18mm thick 10.50 sqm 2100.00 1 sqm
Cement for CM(1:8) for base coat 36.00 Kgs 4220.00 1000 Kgs
Cement for slurry 33.00 Kgs 4220.00 1000 Kgs
MAT-01638 BMS-W.68 White cement for jointing 6.00 Kgs 31.00 1 Kg
MAT-00029 CSoR 28 Sand for CM(1:8) 0.20 Cum 1156.00 1 Cum
B .LABOUR
LAB-00001 CSoR I - 1 Mason 1st class 3.00 Nos 630.00 1 Each
LAB-00002 CSoR I - 2 Mason 2nd class 1.00 Nos 565.00 1 Each
LAB-00120,
CSoR III - 3,4 Mazdoor(un skilled) 8.00 Nos 525.00 1 Each
LAB-00121
Add for MAA @ 20% 0.20 6655.00
Machine cutting charges 43.48 RM 19.00 1 RM
Half rounding the edges 43.48 RM 350.00 1 RM
Add for MAA @ 20% 0.20 6417.65
Add water charges 1% 0.01 48072.03
Rate for 10 sqm
Flooring with 16 mm to 18 mm thick high polished granite stone slabs other than black and regular colours (i.e. of shades like paradiso / bala flower / copper
red / lavender blue) with borders and design as per the pattern approved by the Engineer-in-Charge of length not less than 2.43 mts set over base coat of cement mo
20mm thick using screened sand over CC bed already laid or RCC roof slab including neat grey cement slurry of honey like consistency spread @ 3.3 Kg per sqm a
1 BLD-CSTN-9-7
neatly with white cement paste mixed with pigment of matching shade to full depth including cost and conveyance of all materials like cement , sand , water , granite sla
work site and all operational, incidental labour & lift charges, polishing charges, cost of base coat and overheads & contractors profit complete for finished item of work
& special)
Unit = 10 sqm.
A. MATERIALS:
High polished granite slabs other than black 16 to 18mm
MAT-00778 BMT-B-11 10.50 sqm 2500.00 1 sqm
thick
Cement for CM(1:8) for base coat 36.00 Kgs 4220.00 1000 Kgs
Cement for slurry 33.00 Kgs 4220.00 1000 Kgs
MAT-01638 BMS-W.68 White cement for jointing 6.00 Kgs 31.00 1 Kg
MAT-00029 CSoR 28 Sand for CM(1:8) 0.20 Cum 1156.00 1 Cum
B .LABOUR
LAB-00001 CSoR I - 1 Mason 1st class 3.00 Nos 630.00 1 Each
LAB-00002 CSoR I - 2 Mason 2nd class 1.00 Nos 565.00 1 Each
LAB-00120,
CSoR III - 3,4 Mazdoor(un skilled) 8.00 Nos 525.00 1 Each
LAB-00121
Add for MAA @ 20% 0.20 6655.00
Add water charges 1% 0.01 34944.38
Rate for 10 sqm
Granolithic Concrete flooring 20 mm thick with (1:1:2), using 6mm to 12 mm size hard granite machine crushed metal and screened sand laid over CC bed alrea
50 BLD-CSTN-9-13 RCC roof slab, in alternate panels of size not exceeding 1.50 m x 1.50 m, using glass strips and finishing the top surface to required smoothness and slopes and thr
including cost of all materials like cement, metal sand and water and overheads & contractors profit complete for finished item of work. (APSS No.701 & 710)
Unit : 10sqm
A.MATERIALS :
6mm to 12mm HBG Metal 0.17 Cum 1527.30 1 Cum
Cement 120.00 Kgs 4220.00 1000 Kgs
MAT-00027 CSoR 27(a) Sand 0.085 Cum 1061.00 1 Cum
B. LABOUR
LAB-00001 CSoR I - 1 Mason 1st class 1.25 Nos. 630.00 1 Each
LAB-00002 CSoR I - 2 Mason 2nd class 0.06 Nos. 565.00 1 Each
LAB-00120,
CSoR III - 3,4 Mazdoor (unskiled) 3.00 Nos. 525.00 1 Each
LAB-00121
Add for MAA @ 20% 0.20 2396.40
Add water charges 1% 0.01 3731.91
Rate per 10 sqm
Flooring with chequered Cement Concrete heavy duty tiles conforming to IS: 13801 using aggregates, cement, pigments of size 300mm x 300 mm and thicknes
of any shades as approved by Engineer - In - Charge set over base coat of cement mortar (1:6), 12 mm thick using screened sand over CC bed already laid or RCC
51 BLD-CSTN-9-4
including neat cement slurry of honey like consistency spread @ 3.3 kgs per sqm and jointed with neat white cement to full depth mixed with pigment of matchi
including cost and conveyance of all materials like cement, sand, water and tiles etc.,and overheads & contractors profit complete for finished item of work.
Unit : 10sqm
A.MATERIALS :
MAT-00835 BMT-D.07 Chequred tiles 25mm thick 10.50 sqm 325.00 1 sqm
Cement for CM(1:6) proportion for base coat 28.80 Kgs 4220.00 1000 Kgs
Cement for slurry 33.00 Kgs 4220.00 1000 Kgs
MAT-01638 BMS-W.68 White cement for jointing & pointing 6.00 Kgs 31.00 1.00 Kgs
MAT-00029 CSoR 28 Sand for CM(1:6) proportion 0.12 Cum 1156.00 1 Cum
B. LABOUR
LAB-00001 CSoR I - 1 Mason 1st class 0.96 Nos. 630.00 1 Each
LAB-00002 CSoR I - 2 Mason 2nd class 2.24 Nos. 565.00 1 Each
LAB-00120,
CSoR III - 3,4 Mazdoor (unskiled) 3.30 Nos. 525.00 1 Each
LAB-00121
Add for MAA @ 20% 0.20 3602.90
Add water charges 1% 0.01 8321.50
Rate per 10 sqm
Supply and application of epoxy flooring of light green or light blue colour in Operation Theatres and labour rooms - SIKA Epoxy seamless joint free finish
52 thickness and anti slip & water washable chemical resistance durable and non particle shedding with attractive finishing including cost and conveyance of all materia
labour charges, overheads and contractor profit etc., complete for finished item of work in all floors.
MAT-00734 BMT-C.48 Rate as per SoR 1 sqm 1862.00 1 sqm
Overheads&Contractors Profit @13.615% 0.13615 1862.00
Rate per 1 sqm
Say
CIVIL DATA 2020-21 : Page-745
Providing and laying of precast concrete blocks for paving of M-40 grade and thickness not less than 80 mm for medium traffic areas conforming to IS 15658:2
RBR-CCPV- 13 shapes and designs as per the manufacturer's specification including cost and conveyanace cost of all materilas like cement, sand water and Pavers etc., Complete per
53
(i) and techinical specification clause 1504 MORD including cost and conveyance of all materials and all labour charges, overheads and contractor profit etc., complete fo
item of work.
Unit: 1 sqm Taking out put 225.00
a) Labour
LAB-00002 CSoR I - 2 Mason 2nd class 18.00 Nos. 565.00 1 Each
LAB-00120,
CSoR III - 3,4 Mazdoor (unskiled) 8.00 Nos. 525.00 1 Each
LAB-00121
Add for MAA @ 20% 0.20 14370.00
b) Machinery
HIR-000076 CSoR 10 Water Tanker 6 Kl capacity 2.00 Hour 806.00 1 hour
c) Material
i) High Strength cement concrete inter lcoking designer
MAT-00842 BMT-D.14 225.00 Sqm 550.00 1 Sqm
pavers tile 80mm thick
(ii) Edge blocks 60 m x 2 120.00 RM 10.00 1 RM
MAT-00028 CSoR 27(b) (iii) Sand as per Table 1500.5 7.23 Cum 916.00 1 Cum
Bed = 603x75x 0.03 = 6.75 cum
Joints = 60x0.08 = 0.48 cum
MAT-00332,
M - 189(a),(b) (iv)water for wetting of sand bed 3.00 Kl 116.00 1 Kl
MAT-00333
Cost for 225 sqm = a+b+c
Rate per 1 Sqm
Overheads&Contractors Profit @13.615% 0.13615 670.12
Say
CIVIL DATA 2020-21 : Page-746
Providing polished shahabad / Tandur stone slabs of 15 mm to 18 mm thick in single piece as specified set over a base coat of CM (1:5) , 12mm thick using
sand over already laid CC bed / RCC roof slab including neat cement slurry of honey like consistency spread @ 3.3 Kgs per sqm and jointed with neat cement to
54 including cost and conveyance of all materials like cement, sand, water, flooring stones etc. complete including all labour charges like dressing of flooring stones to the
size, flat nosing the edges, mixing of cement mortar, laying, lift charges , cost of base coat, water charges etc., and overheads & contractors profit complete for finishe
work for treads and risers. (APSS No.703 & 701)
a) BLD-CSTN-9-1 Treads of 0.30m wide :
Unit = 10 sqm.
A. MATERIALS:
MAT-00772 BMT-B-05 Polished shahabad stone 15 to 18mm thick 11.00 sqm 2053.39 10 sqm
Cement for CM (1:5) proportion for base coat 34.56 Kgs 4220.00 1000 Kgs
Cement for slurry 33.00 Kgs 4220.00 1000 Kgs
Cement for jointing 20.00 Kgs 4220.00 1000 Kgs
MAT-00029 CSoR 28 Sand for CM(1:5) 0.12 Cum 1156.00 1 Cum
B .LABOUR
LAB-00001 CSoR I - 1 Mason 1st class 3.10 Nos 630.00 1 Each
LAB-00002 CSoR I - 2 Mason 2nd class 1.10 Nos 565.00 1 Each
LAB-00120,
CSoR III - 3,4 Mazdoor(un skilled) 0.86 Nos 525.00 1 Each
LAB-00121
Add for MAA @ 20% 0.20 3026.00
LAB-00507 BMM-V.13 Flat nosing the edges 33.33 RM 55.00 1 RM
Add for MAA @ 20% 0.20 733.26
Add water charges 1% 0.01 8377.95
Rate for 10 sqm
Providing Polished black Kadapa slabs minimum of 15 mm thick in single piece as specified set over a base coat of CM (1:5) , 12mm thick using screened
already laid CC bed / RCC roof slab including neat cement slurry of honey like consistency spread @ 3.3 Kgs per sqm and jointed with neat cement to full depth inclu
55 and conveyance of all materials like cement, sand, water, flooring stones etc. complete including all labour charges like dressing of flooring stones to the required size, f
the edges, mixing of cement mortar, laying, lift charges , cost of base coat, water charges etc., and overheads & contractors profit complete for finished item of work f
and risers. (APSS No.703 & 701)
a) BLD-CSTN-9-1 Treads of 0.30m wide :
Unit = 10 sqm.
A. MATERIALS:
MAT-00773 BMT-B-06 Polished black Kadapa slabs minimum of 15mm thick 11.00 sqm 2834.16 10 sqm
Cement for CM (1:5) proportion for base coat 34.56 Kgs 4220.00 1000 Kgs
Cement for slurry 33.00 Kgs 4220.00 1000 Kgs
Cement for jointing 20.00 Kgs 4220.00 1000 Kgs
MAT-00029 CSoR 28 Sand for CM(1:5) 0.12 Cum 1156.00 1 Cum
B .LABOUR
LAB-00001 CSoR I - 1 Mason 1st class 3.10 Nos 630.00 1 Each
LAB-00002 CSoR I - 2 Mason 2nd class 1.10 Nos 565.00 1 Each
LAB-00120,
CSoR III - 3,4 Mazdoor(un skilled) 0.86 Nos 525.00 1 Each
LAB-00121
Add for MAA @ 20% 0.20 3026.00
LAB-00507 BMM-V.13 Flat nosing the edges 33.33 RM 55.00 1 RM
Add for MAA @ 20% 0.20 733.26
Add water charges 1% 0.01 9236.80
Rate for 10 sqm
Providing 16 mm to 18 mm thick high polished leather finish granite stone slabs (steel grey or pearl black) with borders and design as per the pattern approv
Engineer-in-Charge of length not less than 2.43 mts set over base coat of cement mortar (1:5) , 12mm thick using screened sand over CC bed already laid or RCC
including neat grey cement slurry of honey like consistency spread @ 3.3 Kg per sqm and jointed neatly with white cement paste mixed with pigment of matching sha
56
depth including cost and conveyance of all materials like cement , sand , water , granite slabs etc., to work site and all operational, incidental labour & lift charges, ful
the edges of treads , providing 3 grooves of size 2mm x 1mm for the full length of treads , polishing charges, cost of base coat and overheads & contractors profit com
finished item of work for treads and risers (S.S.701 & special)
Providing skirting to internal walls to 10 cm height with Polished Shahabad/Tandur stone slabs 15mm to 18mm thick, length equal to flooring stones set over ba
CM(1:5) 12 mm thick using screened sand with cement slurry of honey like consistency spread at the rate of 3.30 kgs per sqm and jointing with white cement paste m
57 BLD-CSTN-9-23
pigment of matching shade to full depth, including cost of all materials like tiles, cement, sand and water etc., complete and overheads & contractors profit complete fo
item of work.(APSS No.701 &707)
Unit = 10 sqm
A.MATERIALS :
MAT-00772 BMT-B-05 Cost of shahabad stone slabs 11.00 sqm 2053.39 10 sqm
MAT-00029 CSoR 28 Sand for CM(1:5) base coat 0.12 cum 1156.00 1 cum
Cement for CM(1:5) base coat 34.56 Kgs 4220.00 1000 Kgs
Cement for slurry 33.00 Kgs 4220.00 1000 Kgs
B.LABOUR
LAB-00001 CSoR I - 1 Mason 1st class 0.96 Nos. 630.00 1 Each
LAB-00002 CSoR I - 2 Mason 2nd class 2.24 Nos. 565.00 1 Each
LAB-00120,
CSoR III - 3,4 Mazdoor(unskilled) 3.10 Nos. 525.00 1 Each
LAB-00121
Add for MAA @ 20% 0.20 3497.90
Add water charges 1% 0.01 6880.03
Rate for 10 sqm
Providing skirting to internal walls to 10 cm height with Polished Kadapa stone slabs minimum of 15mm thick, length equal to flooring stones set over bas
CM(1:5) 12 mm thick using screened sand with cement slurry of honey like consistency spread at the rate of 3.30 kgs per sqm and jointing with white cement paste m
58 BLD-CSTN-9-22
pigment of matching shade to full depth, including cost of all materials like tiles, cement, sand and water etc., complete and overheads & contractors profit complete fo
item of work.(APSS No.701 &707)
Unit = 10 sqm
A.MATERIALS :
MAT-00773 BMT-B-06 Cost of Kdapa stone slabs 10.50 sqm 1889.44 10 sqm
MAT-00029 CSoR 28 Sand for CM(1:5) base coat 0.12 cum 1156.00 1 cum
Cement for CM(1:5) base coat 34.56 Kgs 4220.00 1000 Kgs
Cement for slurry 33.00 Kgs 4220.00 1000 Kgs
B.LABOUR
LAB-00001 CSoR I - 1 Mason 1st class 0.96 Nos. 630.00 1 Each
LAB-00002 CSoR I - 2 Mason 2nd class 2.24 Nos. 565.00 1 Each
LAB-00120,
CSoR III - 3,4 Mazdoor(unskilled) 3.10 Nos. 525.00 1 Each
LAB-00121
Add for MAA @ 20% 0.20 3497.90
Add water charges 1% 0.01 6605.22
Rate for 10 sqm
Providing skirting to internal walls to 10 cm height with Soluble salt porcelain vitrified tiles screen printed and polished of 8 to 10mm thick of any colour and f
shades and designs, length equal to flooring tiles, set over base coat of CM(1:5) 12 mm thick using screened sand with cement slurry of honey like consistency spread a
59 BLD-CSTN-9-20
of 3.30 kgs per sqm and jointing with white cement paste mixed with pigment of matching shade to full depth, including cost of all materials like tiles, cement, sand a
etc.,and overheads & contractors profit complete for finished item of work.(APSS No.701 &707)
Unit = 10 sqm
MAT-00790 BMT-C.06 Cost of vitrified tiles 8-10mm thick 10.50 sqm 425.00 1 sqm
MAT-00029 CSoR 28 Sand for CM(1:5) base coat 0.12 cum 1156.00 1 cum
Cement for CM(1:5) base coat 34.56 Kgs 4220.00 1000 Kgs
Cement for slurry 33.00 Kgs 4220.00 1000 Kgs
MAT-01638 BMS-W.68 White cement for jointing & pointing 2.00 Kgs 31.00 1 Kg
B.LABOUR
LAB-00001 CSoR I - 1 Mason 1st class 0.96 Nos. 630.00 1 Each
LAB-00002 CSoR I - 2 Mason 2nd class 2.24 Nos. 565.00 1 Each
LAB-00120,
CSoR III - 3,4 Mazdoor(unskilled) 3.30 Nos. 525.00 1 Each
LAB-00121
Add for MAA @ 20% 0.20 3602.90
Add water charges 1% 0.01 9271.80
Rate for 10 sqm
Providing skirting 10 cm height with Double charged / multi charged stain free full body porcelain vitrified tiles with double layer pigment of Size 600 x 600
thickness between 8-10 mm of any colour and finish in all shades and designs, length equal to flooring tiles, flushed to wall surface to set over base coat of CM(1:
60 BLD-CSTN-9-20 thick using screened sand with cement slurry of honey like consistency spread at the rate of 3.30 kgs per sqm and jointing with white cement paste mixed with p
matching shade to full depth, including cost of all materials like tiles, cement, sand and water etc.,and overheads & contractors profit complete for finished item of wo
No.701 &707)
Unit = 10 sqm
MAT-00793 BMT-C.09 Cost of vitrified tiles 8-10mm thick 10.50 sqm 612.00 1 sqm
MAT-00029 CSoR 28 Sand for CM(1:5) base coat 0.12 cum 1156.00 1 cum
Cement for CM(1:5) base coat 34.56 Kgs 4220.00 1000 Kgs
Cement for slurry 33.00 Kgs 4220.00 1000 Kgs
MAT-01638 BMS-W.68 White cement for jointing & pointing 2.00 Kgs 31.00 1 Kg
B.LABOUR
LAB-00001 CSoR I - 1 Mason 1st class 0.96 Nos. 630.00 1 Each
LAB-00002 CSoR I - 2 Mason 2nd class 2.24 Nos. 565.00 1 Each
LAB-00120,
CSoR III - 3,4 Mazdoor(unskilled) 3.30 Nos. 525.00 1 Each
LAB-00121
Add for MAA @ 20% 0.20 3602.90
Add water charges 1% 0.01 11235.30
Rate for 10 sqm
Supply and application of epoxy coving with SIKA brand with 50mmx50mm width at the corners of the all walls in Operation Theatres, labour rooms including
61
conveyance of all materials and labour charges, overheads and contractor profit etc., complete for finished item of work .
Providing skirting to internal walls 10 cm height with High Polished Granite 16 mm to 18 mm thick up to 8'-00 (2.43 M) other than black and regular colours, len
to flooring slabs set over base coat of CM(1:5) 12 mm thick using screened sand with cement slurry of honey like consistency spread at the rate of 3.30 kgs per sqm an
62 BLD-CSTN-9-19
with white cement paste mixed with pigment of matching shade to full depth, including cost of all materials like tiles, cement, sand and water etc., and overheads & c
profit complete for finished item of work.
Unit = 10 sqm
A.MATERIALS :
MAT-00777 BMT-B-10 Cost of high polished granite 10.50 sqm 2500.00 1 sqm
MAT-00029 CSoR 28 Sand for CM(1:5) base coat 0.12 cum 1156.00 1 cum
Cement for CM(1:5) base coat 34.56 Kgs 4220.00 1000 Kgs
Cement for slurry 33.00 Kgs 4220.00 1000 Kgs
MAT-01638 BMS-W.68 White cement for jointing & pointing 5.00 Kgs 31.00 1 Kg
LAB-00506 BMM-V.12 Machine cutting charges 66.67 RM 19.00 1 RM
Add for MAA @ 20% 0.20 506.69
B.LABOUR
LAB-00001 CSoR I - 1 Mason 1st class 2.10 Nos. 630.00 1 Each
LAB-00002 CSoR I - 2 Mason 2nd class 4.90 Nos. 565.00 1 Each
LAB-00120,
CSoR III - 3,4 Man Mazdoor(Beldar) 8.00 Nos. 525.00 1 Each
LAB-00121
Add for MAA @ 20% 0.20 8291.50
Add water charges 1% 0.01 38146.69
Rate for 10 sqm
Providing cladding to walls with High Polished Granite 16 mm to 18 mm thick up to 8'-00 (2.43 M) other than black and regular colours, length equal to flooring
over base coat of CM(1:3) 12 mm thick using screened sand with cement slurry of honey like consistency spread at the rate of 3.30 kgs per sqm and jointing with whi
63 BLD-CSTN-9-19
paste mixed with pigment of matching shade to full depth, including cost of all materials like tiles, cement, sand and water etc., and overheads & contractors profit com
finished item of work.
Unit = 10 sqm
A.MATERIALS :
MAT-00777 BMT-B-10 Cost of high polished granite 10.50 sqm 2500.00 1 sqm
MAT-00029 CSoR 28 Sand for CM(1:3) base coat 0.12 cum 1156.00 1 cum
Cement for CM(1:3) base coat 57.60 Kgs 4220.00 1000 Kgs
Cement for slurry 33.00 Kgs 4220.00 1000 Kgs
MAT-01638 BMS-W.68 White cement for jointing & pointing 5.00 Kgs 31.00 1 Kg
B.LABOUR
LAB-00001 CSoR I - 1 Mason 1st class 2.10 Nos. 630.00 1 Each
LAB-00002 CSoR I - 2 Mason 2nd class 4.90 Nos. 565.00 1 Each
LAB-00120,
CSoR III - 3,4 Man Mazdoor(Beldar) 8.00 Nos. 525.00 1 Each
LAB-00121
Add for MAA @ 20% 0.20 8291.50
Add water charges 1% 0.01 36875.85
Rate for 10 sqm
Providing dadooing with glazed red or white full body ceramic wall tiles of size 300 x 450 mm / 320 mm x 400 mm and thickness 6 mm 1st quality conforming to
IS:13712, IS:13630 (Parts 1 to 15) of any colour and finish in all shades and designs with borders as approved by Engineer-in-Charge flushed to wall surface set
64 BLD-CSTN-9-18 coat of CM(1:5) 12 mm thick using screened sand with cement slurry of honey like consistency spread at the rate of 3.30 kgs per sqm and jointing with white cement pa
with pigment of matching shade to full depth, including cost of all materials like tiles, cement, sand and water etc., and overheads & contractors profit complete for fini
of work.
Unit = 10 sqm
A.MATERIALS :
MAT-00806 BMT-C.22 Cost of glazed coloured tiles 10.50 sqm 410.00 1 sqm
MAT-00029 CSoR 28 Sand for CM(1:5) base coat 0.12 cum 1156.00 1 cum
Cement for CM(1:5) base coat 34.56 Kgs 4220.00 1000 Kgs
Cement for slurry 33.00 Kgs 4220.00 1000 Kgs
MAT-01638 BMS-W.68 White cement for jointing & pointing 6.00 Kgs 31.00 1 Kg
B.LABOUR
LAB-00001 CSoR I - 1 Mason 1st class 0.77 Nos. 630.00 1 Each
LAB-00120,
CSoR III - 3,4 Mazdoor(unskilled) 0.80 Nos. 525.00 1 Each
LAB-00121
Add for MAA @ 20% 0.20 905.10
Add water charges 1% 0.01 6000.94
Rate for 10 sqm
Providing dadooing with glazed full body porcelain wall tiles of size 300mm x 600 mm with any type of design texture such as marble finish, wooden, bamb
finishes etc., scratch less, stain free and thickness between 6-8 mm 1st quality conforming to IS:13711, IS:13712, IS:13630 (Parts 1 to 15) of any colour and finish in a
65 BLD-CSTN-9-20 and designs with borders and design as per the approved pattern as approved by Engineer-in-Charge flushed to wall surface set over base coat of CM(1:5) 12 mm t
screened sand with cement slurry of honey like consistency spread at the rate of 3.30 kgs per sqm and jointing with white cement paste mixed with pigment of matching
full depth, including cost of all materials like tiles, cement, sand and water etc., and overheads & contractors profit complete for finished item of work.
Unit = 10 sqm
A.MATERIALS :
MAT-00808 BMT-C.24 Cost of porcelain wall tiles 10.50 sqm 580.00 1 sqm
MAT-00029 CSoR 28 Sand for CM(1:5) base coat 0.12 cum 1156.00 1 cum
Cement for CM(1:5) base coat 34.56 Kgs 4220.00 1000 Kgs
Cement for slurry 33.00 Kgs 4220.00 1000 Kgs
MAT-01638 BMS-W.68 White cement for jointing & pointing 2.00 Kgs 31.00 1 Kg
B.LABOUR
LAB-00001 CSoR I - 1 Mason 1st class 0.96 Nos. 630.00 1 Each
LAB-00002 CSoR I - 2 Mason 2nd class 2.24 Nos. 565.00 1 Each
LAB-00120,
CSoR III - 3,4 Mazdoor(unskilled) 3.30 Nos. 525.00 1 Each
LAB-00121
Add for MAA @ 20% 0.20 3602.90
Add water charges 1% 0.01 10899.30
Rate for 10 sqm
Flooring with plain Cement Concrete general purpose tiles conforming to IS: 13801 using aggregates, cement, pigments of size 300 x 300 mm and thickness 20 m
shade set over base coat of cement mortar (1:6), 12 mm thick using screened sand over CC bed already laid of any shades as approved by Engineer - In - Charge inclu
66 BLD-CSTN-9-4
cement slurry of honey like consistency spread @ 3.3 kgs per sqm and jointed with neat white cement to full depth mixed with pigment of matching shade including
conveyance of all materials like cement, sand, water and tiles etc.,and overheads & contractors profit complete for finished item of work.
Unit : 10sqm
A.MATERIALS :
MAT-00832 BMT-D.04 Plain cement concrete tiles 300mm x 300mm 10.50 sqm 255.00 1 sqm
Cement for CM(1:6) proportion for base coat 28.80 Kgs 4220.00 1000 Kgs
Cement for slurry 33.00 Kgs 4220.00 1000 Kgs
MAT-01638 BMS-W.68 White cement for jointing & pointing 6.00 Kgs 31.00 1.00 Kgs
MAT-00029 CSoR 28 Sand for CM(1:6) proportion 0.12 Cum 1156.00 1 Cum
B. LABOUR
LAB-00001 CSoR I - 1 Mason 1st class 0.96 Nos. 630.00 1 Each
LAB-00002 CSoR I - 2 Mason 2nd class 2.24 Nos. 565.00 1 Each
LAB-00120,
CSoR III - 3,4 Mazdoor (unskiled) 3.30 Nos. 525.00 1 Each
LAB-00121
Add for MAA @ 20% 0.20 3602.90
Add water charges 1% 0.01 7586.50
Rate per 10 sqm
Rate per 1 sqm
Providing plinth protection using plain Cement Concrete general purpose tiles conforming to IS: 13801 using aggregates, cement, pigments of size 300 x 300
thickness 20 mm of any shade for a width of 1200mm set over base coat of cement mortar (1:6), 12 mm thick using screened sand over PCC(1:5:10) bed 100mm th
with drain constructed with 225 mm thick walls using fly ash cement / lime solid blocks of size 290mm x 225mm x 140mm from approved source having minimum
67
strength of 50 Kg/Sqcm. and plastering 12mm thick two coats with base coat of 8mm thick in CM (1:6) and top coat of 4mm thick in CM (1:4) for brick masonry drain
tiles in between basement of the building and brick wall and as directed by the Engineer - in - charge including cost and conveyance of all materials to site, all labou
like mixing of cement concrete, laying, curing, overheads & contractor profit etc., complete for finished item of work.
Say
CIVIL DATA 2020-21 : Page-761
Filling with light weight concrete in Cement Concrete (1:5:10) proportion using brick jelly for low roofs including cost and conveyance of all materials like ceme
68 BLD-CSTN-3-7 brick bats etc., to site including cost of all labour charges for laying concrete, ramming, curing , overheads & contractors profit etc., complete for finished item of wor
No. 402)
Unit: 1 Cum
A. Materials :-
Cement 129.60 Kgs 4220.00 1000 Kgs
MAT-00721 BMT-A.01 Cost of brick jelly 20mm size(1/3rd rate) 460 Nos. 7874.10 1000 Nos.
MAT-00027 CSoR 27(a) Fine aggregate ( Sand ) 0.45 Cum 1061.00 1 Cum
MAT-00332,
M - 189(a),(b) Water (including curing) 1.20 kl 116.00 1 kl
MAT-00333
B.MACHINERY :
HIR-00016& LAB-
CSoR 16 Concrete Mixer 10 / 7 cft (0.2 / 0.8 cum)capacity 1.00 hour 188.10 1 hour
00329
HIR-00150 CSoR 16 Crew Charges 1.00 hour 306.80 1 hour
Add MA on crew charges 0.20 306.80
C.LABOUR :
LAB-00001 CSoR I - 1 1st class mason 0.10 Nos. 630.00 1 Each
LAB-00120,
CSoR III - 3,4 Mazdoor (unskilled) 1.39 Nos. 525.00 1 Each
LAB-00121
Add for MAA @ 20% 0.20 792.75
BLD-CSTN-2-8
& Addendum
dt.14.05.2019 of Filling with well burnt cinder aggregate as per IS:2686-1977 in sunken slabs including cost and conveyance of cinder, labour charges for filling, ramming, overh
69
the Chief contractor profit etc., complete for finished item of work
Engineer (R&B)
Buildings
Unit : 1 cum
Taking output 6.00 cum
a) Labour
LAB-00120,
CSoR III - 3,4 Mazdoor ( Unskilled ) 0.31 Nos. 525.00 1 No.
LAB-00121
Add for MAA @ 20% 0.20 162.75
b)Material :
MAT-00763 BMT-A-17 Cost of well burnt cinder aggregate 6.00 cum 650.00 1 cum
Rate per 6 cum
Reinforced cement concrete (1:5:10) proportion (Cement: fine aggregates: coarse aggregate) using 40mm size (SS5) hard granite metal (coarse aggregate) from
quarry including cost and conveyance of all materials like cement, fine aggregate (sand), coarse aggregate, water etc., to site including centering using Casurina
70 BLD-CSTN-3-13 Bamboos , Wooden Reapers , Runners , Wood Posts , Wall Plates etc., shuttering, machine mixing, laying concrete, lifting concrete manually , vibrating, curing,
overheads & contractors profit complete as per drawings but excluding cost of steel and it's fabrication charges for finished item of work (APSS NO. 402 & 403) fo
columns.
Unit: 1 Cum
A.MATERIALS :
Cement 129.60 Kgs 4220.00 1000 Kgs
MAT-00220 M - 055 40mm HBG metal 0.90 Cum 1349.30 1 Cum
MAT-00027 CSoR 27(a) Sand 0.45 Cum 1061.00 1 Cum
B.LABOUR :
LAB-00001 CSoR I - 1 1st class Mason 0.167 Nos 630.00 1 Each
LAB-00002 CSoR I - 2 2nd class Mason 0.167 Nos 565.00 1 Each
LAB-00120,
CSoR III - 3,4 Mazdoor (unskilled) 4.70 Nos 525.00 1 Each
LAB-00121
Add for MAA @ 20% 0.20 2667.07
C.MACHINERY :
HIR-00016& LAB-
CSoR 16 Concrete Mixer 10 / 7 cft (0.2 / 0.8 cum)capacity 1.00 hour 188.10 1 hour
00329
HIR-00150 CSoR 16 Crew charges 1.00 hour 306.80 1 hour
HIR-00040& LAB-
CSoR 40 Needle vibrator 40mm ( petrol ) 1.00 hour 38.20 1 hour
00352
HIR-00174 CSoR 40 Crew charges 1.00 hour 220.90 1 hour
Add MA on crew charges 0.20 527.70
MAT-00332,
M - 189(a),(b) Water(including for curing) 1.20 kl 116.00 1 kl
MAT-00333
Basic cost per 1 cum
Supplying and fixing of stainless steel (grade 304) hand railing as per approved drawing with top rail of 50mm dia pipe and 2mm thick medium class and vertica
25mm dia and 1.6mm thick medium class 1 No for each step fixed with base plate of 25mm dia using bonding agent and anchor fastner and welding, drilling of 25mm
71
with pneumatic compressor for fixing railing, buffing, polishing all members of the railing thouroughly , lacquer finishing to present seamless finish including
conveyance of all materials, electrodes, welding charges, cost of all consumables, labour charges , overheads & contractors profit etc., complete for finished item of wor
Rate per 1 RM
Rate per 1 sqm
Overheads&Contractors Profit @13.615% 0.13615 3172.29
say
Supplying and fixing of stainless steel (grade 304) railing for ramp as per approved drawing with top rail of 50mm dia pipe and 2mm thick medium class fixed in to
25mm dia pipe of 0.30m length @ 1m centre to centre and welding, buffing, polishing all members of the railing thouroughly , lacquer finishing to present seaml
72
including cost and conveyance of all materials, electrodes, welding charges, cost of all consumables, labour charges , overheads & contractors profit etc., complete fo
item of work.
Rate per 10 RM
Overheads&Contractors Profit @13.615% 0.13615 1509.57
CIVIL DATA 2020-21 : Page-765
say
Supplying and fixing of stainless steel (grade 304) grip bars 200mm length bars in toilets as per approved drawing with 25mm dia pipe with base plates 2 Nos
73 polishing thouroughly , lacquer finishing to present seamless finish including cost and conveyance of all materials, labour charges , overheads & contractors profit etc.,
for finished item of work.
say
Providing 110 mm Dia ISI marked PVC down water take pipes with single socket , 2.5mm thick 4.0 kg/sq.cm pressure of ISI marked including cost of necessary PV
74 couplers, shoes, iron / PVC clamps and all other accessories and fixing in position including cost and conveyance of all materials, operational & incidental charges inc
labour charges for fixing at site etc., and overheads & contractors profit complete for finished item of work. (APSS No. 1328)
Supply and fixing jallies ( cement concrete ) of 50mm thick as per the design approved by the Engineer-in-Charge including cost and conveyance of materials t
75
labour charges etc., overheads & contractors profit complete for finished item of work.
MAT-01589 BMS-W.17 Cost of 50mm thick jali 1.00 sqm 388.00 1 sqm
LAB-00001 CSoR I - 1 1st class mason 0.06 Nos. 630.00 1 Each
LAB-00002 CSoR I - 2 2nd class mason 0.06 Nos. 565.00 1 Each
LAB-00120,
CSoR III - 3,4 Mazdoor(unskilled) 0.275 Nos. 525.00 1 Each
LAB-00121
Add for MAA @ 20% 0.20 216.08
White washing two coats with white cement to ceiling to give an even shade after thouroughly brushing the surface to remove all dirt and remains of loose
76 BLD-CSTN-11-5 materials including cost of all materials , labour charges and incidental such as scaffolding , lift charges etc., and overheads & contractors profit complete for finished ite
in all floors.
Unit : 10 sqm
A.MATERIALS :
MAT-01638 BMS-W.68 White cement 2.00 kgs 31.00 1 kgs
B.LABOUR :
LAB-00035 CSoR I - 35 Painter 1st class 0.063 Nos. 705.00 1 Each
LAB-00093 CSoR II - 37 Painter 2nd class 0.147 Nos. 565.00 1 Each
LAB-00120,
CSoR III - 3,4 Mazdoor(unskilled) 0.32 Nos. 525.00 1 Each
LAB-00121
Add for MAA @ 20% 0.20 295.47
Sundries including brushes , ladders etc., @ 1% 1% 416.56
Rate per 10 sqm
Overheads&Contractors Profit @13.615% 0.13615 420.73
Rate per 10 sqm
Rate per 1 sqm
CIVIL DATA 2020-21 : Page-767
Say
Providing and applying Wall putty of White Cement or Polymer or Cement based of average 1 to 2 mm thickness over plastered surface to prepare the surface
As per
smooth after thoroughly brushing the surface to remove all dirt and remains of loose powdered materials, applying emery paper, Sand the surface, clean & wipe off lo
77 Amendment in
applying knifing paste filler by putty knife / muslin pad, air dry for 2 - 3 hrs, sand with 180 and 320 No., emery paper for the surface preparation including cost and conv
SoR 2011-12
all materials to work site and all operational, incidental, labour charges, over heads and contractors profit etc., complete for finished item of work in all floors for internal
Unit = 10 sqm
MAT-01104 BMT-J.31 wall putty 23.00 Kgs 600.00 20 Kg
LAB-00035 CSoR I - 35 Painter 1st class 0.273 Nos. 705.00 1 Each
LAB-00093 CSoR II - 37 Painter 2nd class 0.637 Nos. 565.00 1 Each
LAB-00120,
CSoR III - 3,4 Mazdoor 0.91 Nos. 525.00 1 Each
LAB-00121
Add for MAA @ 20% 0.20 1030.12
Sundries for emery papers, fillers, knife etc., @ 1% 0.01 1926.14
Providing and applying exterior texture of average 2 to 3 mm thickness over plastered surface to prepare the surface even and smooth after thoroughly brushing th
As per
to remove all dirt and remains of loose powdered materials, applying emery paper, Sand the surface, clean & wipe off loose dust, applying putty/ texture paint filler by pu
78 Amendment in
muslin pad, air dry for 2 - 3 hrs for the surface preparation including cost and conveyance of all materials to work site and all operational, incidental, labour
SoR 2011-12
scaffolding charges, overheads and contractors profit etc., complete for finished item of work in all floors for external walls
Unit = 10 sqm
MAT-01105 BMT-J.32 exterior texture 34.50 Kgs 818.00 25 Kg
LAB-00035 CSoR I - 35 Painter 1st class 0.273 Nos. 705.00 1 Each
LAB-00093 CSoR II - 37 Painter 2nd class 0.637 Nos. 565.00 1 Each
LAB-00120,
CSoR III - 3,4 Mazdoor 0.91 Nos. 525.00 1 Each
LAB-00121
Add for MAA @ 20% 0.20 1030.12
Sundries for emery papers, fillers, knife etc., @ 1% 0.01 2364.98
Hire charges for Access Scaffolding 10 sqm 1.08 1 sqm
Labour charges for scaffolding 10 sqm 8.47 1 sqm
Add for MAA @ 20% 0.20 84.70
Say
Painting to new walls with 2 coats of Acrylic based Oil bound Washable Distemper having VOC content less than 50 grams/litre over promer coat using white
approved by Engineer-In-Charge, making 3 coats in all to give an even shade after thourughly brushing the surface to remove all dirt and remains of loose powdered
79 BLD-CSTN-12-1
including cost and conveyance of all materials to work site and all operational, incidental, labour charges etc., and overheads & contractors profit complete for finishe
work as per APSS 911 for internal walls in all floors.
Unit = 10 sqm
MAT-01638 BMS-W.68 Cost of white cement 0.50 Kg 31.00 1 Kg
LAB-00035 CSoR I - 35 Painter 1st class 0.08 Nos. 705.00 1 Each
LAB-00093 CSoR II - 37 Painter 2nd class 0.19 Nos. 565.00 1 Each
MAT-01093 BMT-J.21 Cost of washable oil bound distemper 1.70 Ltrs 81.00 1 Ltr
LAB-00035 CSoR I - 35 Painter 1st class 0.36 Nos. 705.00 1 Each
LAB-00093 CSoR II - 37 Painter 2nd class 0.84 Nos. 565.00 1 Each
Add for MAA @ 20% 0.20 892.15
Sundries including brushes , ladders etc., @ 1% 0.01 1223.78
Painting to old walls with 2 coats of Acrylic based Oil bound Washable Distemper having VOC content less than 50 grams/litre as approved by Engineer-In-C
BLD-CSTN-11-
80 give an even shade after thourughly brushing the old surface to remove all dirt and remains of loose powdered materials, including cost and conveyance of all materia
10
site and all operational, incidental, labour charges etc., and overheads & contractors profit complete for finished item of work as per APSS 911 for internal walls in all f
Unit = 10 sqm
MAT-01093 BMT-J.21 Cost of washable oil bound distemper 1.70 Ltrs 81.00 1 Ltr
LAB-00035 CSoR I - 35 Painter 1st class 0.36 Nos. 705.00 1 Each
LAB-00093 CSoR II - 37 Painter 2nd class 0.84 Nos. 565.00 1 Each
Add for MAA @ 20% 0.20 728.40
Sundries including brushes , ladders etc., @ 1% 0.01 1011.78
Painting to new walls with 2 coats of water proof cement paint of shade as approved by the Engineer-In-Charge over a base coat of aproved white cement
BLD-CSTN-12-1
81 making 3 coats in all to give an even shade after thourughly brushing the surface to remove all dirt and remains of loose powdered materials, including cost and conv
& 12-5
all materials to work site and all operational, incidental, labour charges etc., and overheads & contractors profit complete for finished item of work as per SS 912 in all flo
MAT-01638 BMS-W.68 Cost of white cement for base coat 1.00 Kgs 31.00 1 Kgs
LAB-00035 CSoR I - 35 Painter 1st class 0.08 Nos. 705.00 1 Each
LAB-00093 CSoR II - 37 Painter 2nd class 0.19 Nos. 565.00 1 Each
MAT-01098 BMT-J.25 Water proof cement paint 2.00 Kgs 1009.00 25 Kgs
LAB-00035 CSoR I - 35 Painter 1st class 0.15 Nos. 705.00 1 Each
LAB-00093 CSoR II - 37 Painter 2nd class 0.35 Nos. 565.00 1 Each
LAB-00120,
CSoR III - 3,4 Mazdoor(unskilled) 1.50 Nos. 525.00 1 Each
LAB-00121
Add for MAA @ 20% 0.20 1254.75
Sundries including brushes , ladders etc., @ 1% 0.01 1617.42
Painting to old walls with 2 coats of water proof cement paint of shade as approved by the Engineer-In-Charge to give an even shade after thourughly brushing th
82 BLD-CSTN-12-4 to remove all dirt and remains of loose powdered materials, including cost and conveyance of all materials to work site and all operational, incidental, labour charges
overheads & contractors profit complete for finished item of work as per SS 912 in all floors.
MAT-01098 BMT-J.25 Water proof cement paint 2.00 Kgs 1009.00 25 Kgs
LAB-00035 CSoR I - 35 Painter 1st class 0.15 Nos. 705.00 1 Each
LAB-00093 CSoR II - 37 Painter 2nd class 0.35 Nos. 565.00 1 Each
LAB-00120,
CSoR III - 3,4 Mazdoor(unskilled) 1.50 Nos. 525.00 1 Each
LAB-00121
Add for MAA @ 20% 0.20 1091.00
Sundries including brushes , ladders etc., @ 1% 0.01 1389.92
BLD-CSTN-12- Supply & application of one coat water based cement primer of interior grade I and two coats of acrylic emulsion paint having VOC (Volatile Organic C
83 2& Amendment content less than 50 grams/litre for internal walls including cost and conveyance of all materials to site, incidental, operational and all labour charges etc.,and ove
in SoR 2011-12 contractors profit complete for finished item of work in all floors.
Unit 10 sqm.
A. Materials:-
MAT-01073 BMT-J.01 Cost of cement primer interior grade I 1.00 Kg 160.00 1 Kg
LAB-00035 CSoR I - 35 Painter 1st class 0.21 Nos. 705.00 1 Each
LAB-00093 CSoR II - 37 Painter 2nd class 0.49 Nos. 565.00 1 Each
MAT-01097 BMT-J.24 Acrylic emulsion paint 0.80 Ltrs 190.00 1 Ltrs
LAB-00035 CSoR I - 35 Painter 1st class 0.36 Nos. 705.00 1 Each
LAB-00093 CSoR II - 37 Painter 2nd class 0.84 Nos. 565.00 1 Each
Add for MAA @ 20% 0.20 1153.30
Sundries including brushes , ladders etc., @ 1% 0.01 1695.96
BLD-CSTN-12- Supply & application of one coat water based cement primer of interior grade I and two coats of synthetic polymer luxury plastic emulsion paint of super
84 2& Amendment having VOC (Volatile Organic Compound) content less than 50 grams/litre for internal walls including cost and conveyance of all materials to site, incidental, operation
in SoR 2011-12 labour charges etc., and overheads & contractors profit complete for finished item of work in all floors.
Unit 10 sqm.
A. Materials:-
MAT-01073 BMT-J.01 Cost of cement primer interior grade I 1.00 Kg 160.00 1 Kg
LAB-00035 CSoR I - 35 Painter 1st class 0.21 Nos. 705.00 1 Each
LAB-00093 CSoR II - 37 Painter 2nd class 0.49 Nos. 565.00 1 Each
MAT-01094 BMT-J.22 Synthetic polymer luxury plastic emulsion paint 0.80 Ltrs 450.00 1 Ltrs
LAB-00035 CSoR I - 35 Painter 1st class 0.36 Nos. 705.00 1 Each
LAB-00093 CSoR II - 37 Painter 2nd class 0.84 Nos. 565.00 1 Each
Add for MAA @ 20% 0.20 1153.30
Sundries including brushes , ladders etc., @ 1% 0.01 1903.96
BLD-CSTN-12- Supply & application of one coat water based cement primer of exterior grade II and two coats of acrylic exterior emulsion paint having VOC (Volatil
85 2& Amendment Compound) content less than 50 grams/litre for exterior walls including cost and conveyance of all materials to site, incidental, operational and all labour charge
in SoR 2011-12 overheads & contractors profit complete for finished item of work in all floors.
Unit 10 sqm.
A. Materials:-
MAT-01074 BMT-J.02 Cost of cement primer exterior grade II 1.00 Kg 200.00 1 Kg
LAB-00035 CSoR I - 35 Painter 1st class 0.21 Nos. 705.00 1 Each
LAB-00093 CSoR II - 37 Painter 2nd class 0.49 Nos. 565.00 1 Each
MAT-01107 BMT-J.34 Acrylic emulsion paint 0.80 Ltrs 210.00 1 Ltrs
LAB-00035 CSoR I - 35 Painter 1st class 0.21 Nos. 705.00 1 Each
LAB-00093 CSoR II - 37 Painter 2nd class 0.49 Nos. 565.00 1 Each
LAB-00120, LAB-
CSoR III - 3,4 Mazdoor(Unskilled) 1.50 Nos. 525.00 1 Each
00121
Add for MAA @ 20% 0.20 1637.30
Sundries including brushes , ladders etc., @ 1% 0.01 2332.76
BLD-CSTN-12- Supply & application of one coat water based cement primer of exterior grade II and two coats of synthetic polymer luxury plastic emulsion paint of super
86 2& Amendment having VOC (Volatile Organic Compound) content less than 50 grams/litre for exterior walls including cost and conveyance of all materials to site, incidental, operation
in SoR 2011-12 labour charges etc., and overheads & contractors profit complete for finished item of work in all floors.
Unit 10 sqm.
A. Materials:-
MAT-01074 BMT-J.02 Cost of cement primer exterior grade II 1.00 Kg 200.00 1 Kg
LAB-00035 CSoR I - 35 Painter 1st class 0.21 Nos. 705.00 1 Each
LAB-00093 CSoR II - 37 Painter 2nd class 0.49 Nos. 565.00 1 Each
MAT-01094 BMT-J.22 Synthetic polymer luxury plastic emulsion paint 0.80 Ltrs 450.00 1 Ltrs
LAB-00035 CSoR I - 35 Painter 1st class 0.21 Nos. 705.00 1 Each
LAB-00093 CSoR II - 37 Painter 2nd class 0.49 Nos. 565.00 1 Each
LAB-00120, LAB-
CSoR III - 3,4 Mazdoor(Unskilled) 1.50 Nos. 525.00 1 Each
00121
Add for MAA @ 20% 0.20 1637.30
Sundries including brushes , ladders etc., @ 1% 0.01 2524.76
Providing and applying water proof wall putty of white cement or polymer or cement based of average 1 to 2 mm thickness over plastered surface to prepare th
even and smooth after thoroughly brushing the surface to remove all dirt and remains of loose powdered materials, applying emery paper, Sand the surface, clean &
As per
loose dust, applying knifing paste filler by putty knife / muslin pad, air dry for 2 - 3 hrs, sand with 180 and 320 No., emery paper for the surface preparation, applying on
87 Amendment in
cement primer of interior grade-1 and two coats of poy-urethane paint (MRF) of light green or light blue colour with 1mm thickness with anti fungal and ant
SoR 2011-12
chemical resistance durable and non particle shedding including cost and conveyance of all materials to work site and all operational, incidental, labour charges, over h
contractors profit etc., complete for finished item of work in all floors for internal walls and ceiling of Operation Theatre and labour rooms.
Unit = 10 Sqm
a) wall putty
MAT-01104 BMT-J.31 wall putty 23.00 Kgs 600.00 20 Kg
LAB-00035 CSoR I - 35 Painter 1st class 0.273 Nos. 705.00 1 Each
LAB-00093 CSoR II - 37 Painter 2nd class 0.637 Nos. 565.00 1 Each
LAB-00120,
CSoR III - 3,4 Mazdoor 0.91 Nos. 525.00 1 Each
LAB-00121
Add for MAA @ 20% 0.20 1030.12
Sundries for emery papers, fillers, knife etc., @ 1% 0.01 1926.14
b) primer coat
MAT-01073 BMT-J.01 Cost of cement primer interior grade I 1.00 Kg 160.00 1 Kg
LAB-00035 CSoR I - 35 Painter 1st class 0.21 Nos. 705.00 1 Each
LAB-00093 CSoR II - 37 Painter 2nd class 0.49 Nos. 565.00 1 Each
Add for MAA @ 20% 0.20 424.90
Sundries including brushes , ladders etc., @ 1% 0.01 669.88
Total (a+b+c)
Overheads&Contractors Profit @13.615% 0.13615 4186.56
Rate per 10 sqm
Rate per 1 sqm
Say
CIVIL DATA 2020-21 : Page-773
Painting to new wood work and flush shutters with lappam finish , over a primary coat and painting two coats of synthetic enamel paint Grade-I VOC (Volatil
BLD-CSTN-12-6
88 Compound) content less than 50 grams/litre of approved shade including cost and conveyance of all materials to site cost of primer coat and all labour charges etc.
& 12-12-195
including applying sand paper on lappam coats for neat finish and overheads & contractors profit complete in all floors (APSS No.1200, 1207 & 1211).
Painting to old wood work and flush shutters with two coats of synthetic enamel paint Grade-II VOC (Volatile Organic Compound) content less than 50 gra
BLD-CSTN-12-
89 approved brand and shade including cost and conveyance of all materials to site and all labour charges etc. complete and overheads & contractors profit complete in
12-196
(APSS No.1200, 1207 & 1211) .
MAT-01102 BMT-J.29 Cost of Synthetic Enamel Paint 1.10 Ltr 270.00 1 Ltr
LAB-00035 CSoR I - 35 1st Class Painter 0.36 Nos. 705.00 1 Each
LAB-00093 CSoR II - 37 2nd Class Painter 0.84 Nos. 565.00 1 Each
Add for MAA @ 20% 0.20 728.40
Sundries including brushes , ladders etc., @ 1% 0.01 1171.08
Painting primer coat on new wood work using red oxide Iron primer paint grade - 1 of approved brand including cost and conveyance of all materials to site ,
90 BLD-CSTN-12-7
charges etc., and overheads & contractors profit complete in all floors.(APSS No. 1201, 1212 & 1207).
Unit : 10 sqm
A.MATERIALS :
MAT-01075 BMT-J.03 Red oxide primer 0.70 Ltr 145.00 1 Ltr
B.LABOUR :
LAB-00035 CSoR I - 35 1st Class Painter 0.21 Nos. 705.00 1 Each
LAB-00093 CSoR II - 37 2nd Class Painter 0.49 Nos. 565.00 1 Each
Add for MAA @ 20% 0.20 424.90
Sundries including brushes , ladders etc., @ 1% 0.01 611.38
Painting two coats with synthetic enamel paint Grade-I VOC (Volatile Organic Compound) content less than 50 grams/litre to new iron work including
BLD-CSTN-12-
91 conveyance of all materials to site, incidental, operational and all labour charges etc., and overheads & contractors profit complete for finished item of work in all floors
12-197
1201, 1212 & 1207).
Unit : 10 sqm
A.MATERIALS :
MAT-01102 BMT-J.29 Cost of Synthetic Enamel Paint 1.10 Ltr 270.00 1 Ltr
B.LABOUR :
LAB-00035 CSoR I - 35 1st Class Painter 0.33 Nos. 705.00 1 Each
LAB-00093 CSoR II - 37 2nd Class Painter 0.77 Nos. 565.00 1 Each
Add for MAA @ 20% 0.20 667.70
Sundries including brushes , ladders etc., @ 1% 0.01 1098.24
Painting two coats with synthetic enamel paint Grade-II VOC (Volatile Organic Compound) content less than 50 grams/litre over primer coat of red oxide to
BLD-CSTN-12-7
92 work including cost and conveyance of all materials to site, incidental, operational and all labour charges etc., and overheads & contractors profit complete for finishe
& 12-12-197
work in all floors. (SS No. 1201, 1212 & 1207).
Unit : 10 sqm
A.MATERIALS :
MAT-01075 BMT-J.03 Red oxide primer 0.70 Ltr 145.00 1 Ltr
MAT-01102 BMT-J.29 Cost of Synthetic Enamel Paint 1.10 Ltr 270.00 1 Ltr
B.LABOUR :
for primer coat
LAB-00035 CSoR I - 35 1st Class Painter 0.21 Nos. 705.00 1 Each
LAB-00093 CSoR II - 37 2nd Class Painter 0.49 Nos. 565.00 1 Each
for enamel painting
LAB-00035 CSoR I - 35 1st Class Painter 0.33 Nos. 705.00 1 Each
LAB-00093 CSoR II - 37 2nd Class Painter 0.77 Nos. 565.00 1 Each
Add for MAA @ 20% 0.20 1092.60
Sundries including brushes , ladders etc., @ 1% 0.01 1709.62
Painting two coats with synthetic enamel paint Gr-I having VOC (Volatile Organic Compound) content less than 50 grams/litre to old iron work including
BLD-CSTN-12-
93 conveyance of all materials to site, incidental, operational and all labour charges and overheads & contractors profit etc., complete for finished item of work in all floors
12-198
1201, 1212 & 1207).
Unit : 10 sqm
A.MATERIALS :
MAT-01102 BMT-J.29 Cost of Synthetic Enamel Paint 0.90 Ltr 270.00 1 Ltr
B.LABOUR :
LAB-00035 CSoR I - 35 1st Class Painter 0.33 Nos. 705.00 1 Each
LAB-00093 CSoR II - 37 2nd Class Painter 0.77 Nos. 565.00 1 Each
Add for MAA @ 20% 0.20 667.70
Sundries including brushes , ladders etc., @ 1% 0.01 1044.24
BLD-CSTN-12- Polishing two coats to teak wood doors using French spirit polish of approved brand for new wood work to teak wood frame and shutters including sand papering
94
15 surfaces etc. including cost and conveyance of all materials to site, all labour charges etc., complete for finished item of work in all floors.
A.Materials
MAT-01086 BMT-J.14 French polish 0.228 Ltrs 200.00 1 Ltrs
MAT-01082 BMT-J.10 cost of spirit 1.63 Ltrs 96.00 1 Ltrs
B.Labour
LAB-00035 CSoR I - 35 1st Class Painter 0.96 Nos. 705.00 1 Nos.
LAB-00093 CSoR II - 37 2nd Class Painter 2.24 Nos. 565.00 1 Nos.
Add for MAA @ 20% 0.20 1942.40
Sundries for terpentaine, sand paper, putty, wood filler,
0.01 2532.96
white woolen cloth, linseed oil, cotton etc., @ 1%
Supply & applying Melamine Polish Glossy/ Matt finish to the wood works duly cleaning the surface and applying emery paper, sand the wood with 180 No., em
As per and then with 320 No., emery paper, clean & wipe off loose dust, applying suitable knifing paste filler / wood filler by putty knife / muslin pad, air dry for 2 - 3 hrs, sand
95 Amendment in and 320 No., emery paper, apply two component wood sealer, air dry for 24 hrs, sand with 320 No emery paper, applying one coat of approved spraying thinner (for
SoR 2011-12 applying one coat of approved brushing thinner or general purpose thinner (for brushing) and apply (either with spray or brush) two coats of approved brand melamine
cost & labour charges, emery papers, cost of thinner & melamine polish, over heads and contractors profit etc., complete for finished item of work
Unit : 1 sqm
A.Materials
MAT-01088 BMT-J.16 Melamine polish 0.065 Ltrs 325.00 1 Ltrs
MAT-01084 BMT-J.12 Thinner for Poly Uretene polish 0.033 Ltrs 140.00 1 Ltrs
B.Labour
LAB-00035 CSoR I - 35 1st Class Painter 0.24 Nos. 705.00 1 Nos.
LAB-00093 CSoR II - 37 2nd Class Painter 0.56 Nos. 565.00 1 Nos.
LAB-00120,
CSoR III - 3,4 Helper 0.80 Nos. 525.00 1 Nos.
LAB-00121
Add for MAA @ 20% 0.20 905.60
Sundries for spraying machine etc., @ 1% 0.01 1112.47
Supply & applying Poly-Urethane Water Proof Polish Glossy/ Matt finish to the wood works duly cleaning the surface and applying emery paper, sand the wood
No., emery paper and then with 320 No., emery paper, clean & wipe off loose dust, applying suitable knifing paste filler / wood filler by putty knife / muslin pad, air dr
As per hrs, sand with 180 and 320 No., emery paper, applying two component wood sealer, after the surface preparation applying one coat of approved spraying PU th
96 Amendment in spraying) / applying one coat of approved brushing PU thinner or general purpose thinner (for brushing) and apply one coat of PU by brush or spray, air-dry overn
SoR 2011-12 again with 180 No. emery paper and removing dust, applying second coat of PU, air drying for 4 - 6 Hrs, sand with 320 No emery paper, and applying (either with spray
two coats of approved brand PU including cost & labour charges, emery papers, cost of thinner & Poly-Urethane Water Proof Polish, over heads and contracors p
complete for finished item of work
Unit : 1 sqm
A.Materials
MAT-01089 BMT-J.17 Poly-Urethene polish Interior grade 0.065 Ltrs 750.00 1 Ltrs
MAT-01084 BMT-J.12 Thinner for Poly Uretene polish 0.033 Ltrs 140.00 1 Ltrs
B.Labour
LAB-00035 CSoR I - 35 1st Class Painter 0.24 Nos. 705.00 1 Nos.
LAB-00093 CSoR II - 37 2nd Class Painter 0.56 Nos. 565.00 1 Nos.
LAB-00120,
CSoR III - 3,4 Helper 0.80 Nos. 525.00 1 Nos.
LAB-00121
Add for MAA @ 20% 0.20 905.60
Sundries for spraying machine etc., @ 1% 0.01 1140.09
Supply & fixing of Rolling shutter made of 80 x 1.25 mm machine rolled CRCA laths, interlocked together through their entire length and jointed together at the end
locks, mounted on specially designed pipe shaft of 50mm dia nominal bore MS B class pipe with brackets, plates, guide channels, stoppers, bottom locking p
97
arrangements for inside & outside locking with push-pull operations including cost of hood cover and springs complete, painted with one coat of approved steel primer,
bearings, all accessories etc., overheads & contractors profit complete for finished item of work as per special spn: 1108
Supplying & fixing collapsible steel shutters with vertical, double channel of 20 x10x2 mm of 100 mm centre, Bracers with flat iron 40x40x6 mm with 38 mm dia ste
the top, bottom and side vertical frames of the collapsible gate with 65x65mmx8mm MS Angle and middle guide rail at site height with 65mmx8mm MS flat for the
98
guide and fixed with necessary hold fasts, bolts, nuts, rivets, locking arrangements, stoppers, handles, all accessories all fixtures and painted with one coat of appro
primer etc., overheads & contractors profit complete for finished item of work as per special spn 1105
MAT-00896 BMT-F.30 Rate as per SSR 1.00 sqm 3508.00 1 sqm
Overheads&Contractors Profit @13.615% 0.14 3508.00
Rate per 1 sqm
CIVIL DATA 2020-21 : Page-778
Say
Providing specialized polysulphide sealant treatment to the expansion joints on terrace (Size : 25mm x 12mm): Application of one coat of-High performance
designed SBR latex polymer based bonding agent– ROOFBOND SBR (Armstrong) / POWER n BOND SBR (EBT) / NITOBOND SBR (Fosroc) ZORIBOND SBR (PMC
LATEX (Sika) WATERSHIELD BOND SBRASTM - C 920 -95 /DIN 18549 TT -S-00227E or equivalent mixing with cement as per manufacturers c] Providing and app
Acrylic Polymer modified reinstatement concrete/mortar admixture with - OOFCRETE AR (Armstrong ) / ZORIGROUT CMG (PMCC) / POWER n GUARD ARM
WATERSHIELD AR / Fosroc to finish the damaged edges of joint and making the groove. d]. Providing and fixing of masking tape on top of the joint both sides. e]. Prov
fixing of Back up support material of Polyethelene foam to leave the depth of 12mm on the joint. f]. Providing and application of one coat of polysulphide prim
99
Polysulphide primer on inner edge on joints. g]. Providing and application of Two part Polysulphide sealant to a width of 25mm and 12mm depth with - ROOF
(Armstrong ) / POWER n SEAL PS (EBT) /NITOSEAL PS 200 (Fosroc)/ ZORISEAL PS (PMCC) / SIKA POLYSULPHIDE (Sika) / WATERSHIELD PSComplies with BS
or equavalent with putty knife and neat finish. h]. Removing of masking tape and providing and application of two coats of Acrylic elastomeric cementitious coati
ROOFSEAL PS (Armstrong ) / POWER n SEAL PS (EBT) /NITOSEAL PS 200 (Fosroc)/ ZORISEAL PS (PMCC) / SIKA POLYSULPHIDE (Sika) / WATERSHIELD PS
cost and conveyance of all materials, labour charges, overheads & contractors profit etc., complete for finished item of work
Providing and fixing of Expansion joint filler board for buildings, columns, beams and slabs 25 mm thick including cost and conveyance of all materials
100
incidental, operational, labour charges etc.overheads & contractors profit complete for finished item of work as per approved drawing for all floors
Providing and fixing of 24 gauge alluminium sheet over expansion joint groove of width 15cm fixed to walls / columns at one edge and resting over the o
walls/columns concealing expansion joint with slotted holes for free edge of aluminium sheet to facilitate free movement of aluminium sheet over the finished s
101
expansion joint and wall face using sheet metal screws with nylon receiver complete including cost and conveyance of all materials to site, all incidental, operation
charges , overheads & contractors profit etc., complete for finished item of work as per approved drawing (for all floors for vertical joints and bottom of slab)
MAT-01590 BMS-W.18 Cost of aluminium sheet 24 gauge 1.00 sqm 282.00 1 sqm
Add for labour charges including cost of nails, making
6.60 RM 25.00 1 RM
holes to wall and in aluminium sheet etc.
Rate per 1 sqm
Rate per 1 RM
Overheads&Contractors Profit @13.615% 0.13615 68.00
CIVIL DATA 2020-21 : Page-779
Say
Supplying and fixing aluminium composite cladding 4mm thick of approved make with skin material 0.50 mm thick aluminium sheet cover material natural po
aluminium cladding panel fixed with extruded aluminium basis frame (50x25x1.5mm) angle cleats, weather sealants, rivets, GI brackets all as approved, using suitabl
102
structural steel work including necessary accessories complete in all respects including all scaffolding and labour charges , overheads & contractors profit etc., com
finished item of work but excluding cost of structural steel fabrication if any.
Providing and Fixing Structural Glazing fabricated from Roll formed sections made of Pre-painted Steel / Powder coated (Base steel as per IS 513 of ‘D
galvanized as per IS 277 with Zinc of 120 Gm/sqm) with total coated thickness of 0.72mm. The glass holding section made of 304 grade stainless steel of 0.6mm thick a
design requirement & calculations as given in IS: 875. Primer coat with epoxy primer of 5 – 7 microns thick, finish painted with a polyester paint of 12-16 microns thick
103 coated with Alkyd backer of 5-7 microns or powder coated with pure polyester powder up to 50-60 microns thick. The vertical section should be of 50mm x100mm x
33mm x 58mm x 0.72mm for frame horizontal section, stiffener section should be 48mm x 98mm x 1mm, cover profiles sections should be of 20mm x 58mm x 0.58m
holding section should be of 37mm x 37mm & 37mm x 18mm. Including 5mm thick Ocean Blue reflective glass. Brackets made of CRCA powder coated/Electroplated
used to connect vertical to horizontal, vertical to slab, to fix verticals at top & bottom as per site requirement.
Gasket made of Ethyl Propylene Diamine Monomer. Natural cure, with Good U.V. Resistance Silicon to be used. Wall fixing of sections to concrete/masonry wall shou
self-expanding cap & screws. The rate is inclusive of cost and conveyance of all materials to site, all labour charges, incidental charges, cost of all consumables
scaffolding charges, form work , overheads & contractors profit etc., complete for finished item of work in all floors.
MAT-01489 BMT - Q.01 Rate as per SSR 1.00 sqm 7150.00 1 sqm
Overheads&Contractors Profit @13.615% 0.13615 7150.00
Rate per 1 sqm
Say
Providing and Fixing Top Hung shutters in Structural Glazing fabricated from Roll formed sections made of Pre-painted Steel / Powder coated (Base steel
513 of ‘D’ quality, galvanized as per IS 277 with Zinc of 120 Gm/sqm) with total coated thickness of 0.72mm. The glass holding section made of 304 grade stainles
0.6mm thick. Galvanized steel sections are to be used as stiffeners inside the colour coated steel/powder coated sections as per the design requirement. Design ca
are made to suit wind pressures as given in IS 875. Primer coat with epoxy primer of 5-7 microns thick and back coated with Alkyd backer of 5-7 microns or powder co
104
pure polyester powder up to 50-60 microns thick. The outer frame should be of 20mm x 58mm x 0.6mm, Shutter section should be of 58mm x 33mm x 0.72 mm
section should be 56mm x 31mm x 1mm. EARL Bihari Hinges – 2 Nos for each shutter and Aluminium Stays – 2 Nos. for each shutter, Aluminium Handle – 1 no
shutter. The rate is inclusive of cost and conveyance of all materials to site, all labour charges, incidental charges, cost of all consumables etc. and scaffolding char
work, overheads & contractor profit etc. complete for finished item of work in all floors.
MAT-01490 BMT - Q.02 Rate as per SSR 1.00 sqm 5645.00 1 sqm
Overheads&Contractors Profit @13.615% 0.13615 5645.00
CIVIL DATA 2020-21 : Page-780
Providing and fixing in true horizontal level 13 mm - Mineral Fiber Ceiling tile of 595 x 595 (Square edge Fissura fine model) using hot dipped Galvanized Ste
BLD-CSTN-10-
exposed surface with pre-coated capping, main Tee of size 24 x 32 mm at every 1200 mm c/c maximum and rotary stitched cross tee of size 24 x 27 mm at every 60
33 & vide Page
105 and sub-cross tee of size 24 mm x 25 mm at 1200 mm c/c and wall angle of size 19 x 19 mm fixed to periphery of the wall and the above grid is suspended at every 120
No. 391 of SoR
in both directions using 2.0 mm thick pre-straightened GI Wire including cost and conveyance of all materials and labour charges such as cutting , fixing of standing
2011-12
work exposing roof making, overheads & contractor profit etc., complete for finished item of work in all floor in all floors.
Unit 1 sqm
A) Material requirement
MAT-01315 BMT-M.80 13mm Mineral Fiber sheet 600 x 600 1.00 sqm 353.00 1 sqm
Hotdipped GI Angle - Precoated - Grid -
MAT-01246 BMT-M.11 0.40 RM 37.00 1 RM
19mmx19mmX0.7mm
MAT-01247 & BMT-M.12 & Polyster painted GI - T section - 1200mm - 24x32mm and
1.60 RM 50.00 1 RM
MAT-01248 13 24x25mm (sub-cross Tee)
MAT-01249 BMT-M.14 Polyster painted GI-T Section - 300mm - 24mm x 27mm 1.60 RM 49.00 1 RM
MAT-01262 BMT-M.27 GI Rod - prestraightened - 2.0mm dia -Connecting Rod 1.28 RM 10.00 1 RM
MAT-01253 BMT-M.18 6mm Nylon Rawl Plug 1.28 Nos. 4.00 1 No.
B) Labour charges
LAB-00004 CSoR I - 4 1st Class Carpenter 0.12 Nos. 705.00 1 No.
LAB-00060 CSoR II - 4 2nd Class Carpenter 0.12 Nos. 565.00 1 No.
LAB-00004 CSoR I - 4 Power Saw cutter - Hand Operated - Operator 0.012 Nos. 705.00 1 No.
LAB-00004 CSoR I - 4 Power Drill - Hand Operated - Operator 0.012 Nos. 705.00 1 No.
LAB-00120,
CSoR III - 3,4 Unskilled Mazdoor 0.072 Nos. 525.00 1 No.
LAB-00121
Add for MAA @ 20% 0.20 207.12
C) Machinery
MAT-00206 BMC-X.02 Power Saw cutter - Hand Operated - Hire Charges 0.32 Hours 132.00 1 hour
MAT-00207 BMC-X.03 Power Drill - Hand Operated - Hire Charges 0.32 Hours 121.00 1 hour
Providing and fixing in true horizontal level 15 mm - Mineral Fiber Ceiling tile of 595 x 595 (Square edge Fissura fine model) using hot dipped Galvanized Ste
BLD-CSTN-10-
exposed surface with pre-coated capping, main Tee of size 24 x 32 mm at every 1200 mm c/c maximum and rotary stitched cross tee of size 24 x 27 mm at every 60
33 & vide Page
106 and sub-cross tee of size 24 mm x 25 mm at 1200 mm c/c and wall angle of size 19 x 19 mm fixed to periphery of the wall and the above grid is suspended at every 120
No. 391 of SoR
in both directions using 2.0 mm thick pre-straightened GI Wire including cost and conveyance of all materials and labour charges such as cutting , fixing of standing
2011-12
work exposing roof making, overheads & contractor profit etc., complete for finished item of work in all floor in all floors.
Unit 1 sqm
A) Material requirement
MAT-01319 BMT-M.84 15mm Mineral Fiber sheet 600 x 600 1.00 sqm 518.00 1 sqm
Hotdipped GI Angle - Precoated - Grid -
MAT-01246 BMT-M.11 0.40 RM 37.00 1 RM
19mmx19mmX0.7mm
MAT-01247 & BMT-M.12 & Polyster painted GI - T section - 1200mm - 24x32mm and
1.60 RM 50.00 1 RM
MAT-01248 13 24x25mm (sub-cross Tee)
MAT-01249 BMT-M.14 Polyster painted GI-T Section - 300mm - 24mm x 27mm 1.60 RM 49.00 1 RM
MAT-01262 BMT-M.27 GI Rod - prestraightened - 2.0mm dia -Connecting Rod 1.28 RM 10.00 1 RM
MAT-01253 BMT-M.18 6mm Nylon Rawl Plug 1.28 Nos. 4.00 1 No.
B) Labour charges
LAB-00004 CSoR I - 4 1st Class Carpenter 0.12 Nos. 705.00 1 No.
LAB-00060 CSoR II - 4 2nd Class Carpenter 0.12 Nos. 565.00 1 No.
LAB-00004 CSoR I - 4 Power Saw cutter - Hand Operated - Operator 0.012 Nos. 705.00 1 No.
LAB-00004 CSoR I - 4 Power Drill - Hand Operated - Operator 0.012 Nos. 705.00 1 No.
LAB-00120,
CSoR III - 3,4 Unskilled Mazdoor 0.072 Nos. 525.00 1 No.
LAB-00121
Add for MAA @ 20% 0.20 207.12
C) Machinery
MAT-00206 BMC-X.02 Power Saw cutter - Hand Operated - Hire Charges 0.32 Hours 132.00 1 hour
MAT-00207 BMC-X.03 Power Drill - Hand Operated - Hire Charges 0.32 Hours 121.00 1 hour
Supplying and fixing Gyp Board Suspended regular single layer false ceiling (GS-MFSC-4.1) using 12.5 mm thick Gyp Board conforming to IS 2095 - 1993 fixi
steel GI perimeter channels of size 20 mm x 27 mm x 30 mm(web) of 0.55 mm thick along the perimeter of ceiling screw fixed to brick work/ partition at 610 mm
BLD-CSTN-10-
suspending the frame work using Intermediate channels (45 mm x 15mm x 15mm x 0.9 mm) from soffit at 1220 mm c/c with ceiling angle (25 mm x 10 mm x 0.55 mm)
31 & vide Page
107 GI Cleat and steel expansion fasteners & connecting clip to the ceiling channels (with knurled web of 51.5 mm x 26 mm x 10.5 mm x 0.55 mm) fixed in direction perpen
No. 389 of SoR
the intermediate channel at 457 mm c/c and fixing the 12.5 mm tapered edge Gypboard with 25 mm drywall screws at 230 mm c/c & jointing and finishing using joint c
2011-12
and paper tape to have a flush look including filling the tapered & square edges with jointing compound, two coats of drywall top coat including overheads and contra
etc., complete for finished item of work
Unit - 1 sqm A) Material requirement as per India Gypsum
12.5mm Gypboard
MAT-01238 BMT-M.03 1219mm x 1829mm size Boards 1.03 sqm 221.00 1 sqm
MAT-01239 BMT-M.04 GI Ceiling Angle - 25mm x 10mm x 0.5mm 0.64 RM 78.00 1 RM
GI Ceiling section - 51.5mm x 26mm x 10.5mm x 0.55mm
MAT-01240 BMT-M.05 0.84 RM 106.00 1 RM
thick
MAT-01241 BMT-M.06 Intermediate channel - 45mm x 15mm x 15mm x 0.9mm 0.84 RM 78.00 1 RM
Perimeter channel - 20mm x 27mm x 30mm (web) of
MAT-01242 BMT-M.07 0.40 RM 69.00 1 RM
0.55mm thick
MAT-01252 BMT-M.17 Connecting Clips 1.84 Nos. 10.00 1 No.
MAT-01253 BMT-M.18 Rawl Plug 0.64 Nos. 4.00 1 No.
MAT-01255 BMT-M.20 Soffit Cleats 0.64 Nos. 5.00 1 No.
MAT-01256 BMT-M.21 Drywall screws - 25mm 18.00 Nos. 4.00 1 No.
MAT-01257 BMT-M.22 Jointing Compound 0.55 Kgs. 32.00 1 Kg.
MAT-01258 BMT-M.23 Jointing Paper tape 1.46 RM 6.00 1 RM
MAT-01259 BMT-M.24 Drywall top coat 0.15 Ltrs 150.00 1 Ltr
B) Labour Charges
LAB-00004 CSoR I - 4 1st Class Carpenter 0.12 Nos. 705.00 1 No.
LAB-00060 CSoR II - 4 2nd Class Carpenter 0.12 Nos. 565.00 1 No.
LAB-00035 CSoR I - 35 1st Class Painter 0.024 Nos. 705.00 1 No.
LAB-00093 CSoR II - 37 2nd Class Painter 0.024 Nos. 565.00 1 No.
LAB-00004 CSoR I - 4 Power Saw cutter - Hand Operated - Operator 0.012 Nos. 705.00 1 No.
LAB-00004 CSoR I - 4 Power Drill - Hand Operated - Operator 0.024 Nos. 705.00 1 No.
LAB-00120, LAB-
CSoR III - 3,4 Unskilled Mazdoor 0.072 Nos. 525.00 1 No.
00121
Add for MAA @ 20% 0.20 246.06
C) Machinery
MAT-00206 BMC-X.02 Power Saw cutter - Hand Operated - Hire Charges 0.32 Hours 132.00 1 Hour
MAT-00207 BMC-X.03 Power Drill - Hand Operated - Hire Charges 0.64 Hours 121.00 1 Hour
Say
Supplying and fixing Gyp board Fine line Grid false ceiling (GS-FLC-4.6)using 12.5mm thick Gyp Board sheet tiles of size 595mm x 595mm conforming to IS 20
BLD-CSTN-10- fixing to Gyp steel precoated GI wall angle of size 25mm x 25mm x 0.70mm thick along the perimeter of ceiling screw fixed to brick work / partition at 610mm center to c
32 & vide Page suspending the frame work using precoated GI Tee section (24mm x 38mm x 0.7mm) from soffit at 1220mm center to center fixed with GI Soffit Cleat, rawl plugs
108
No. 390 of SoR expansion fasteners & connecting clip to the GI Tee section with 4mm dia GI rod with galvanised spring steel level clip of PVC unversal holding clips system at 1200mm
2011-12 center and fixing the 12.5mm Gypboard sheet tiles of size 595mm x 595mm and finishing two coats of drywall top coat, overheads and contractor profit complete for fini
of work in all floors.
Unit - 1 sqm
A) Material requirement as per India Gypsum
12.5mm Gypboard Tiles
MAT-01236 BMT-M.01 595mm x 595mm 1.00 sqm 275.00 1 sqm
MAT-01243 BMT-M.08 GI Angle - Precoated - 25mm x 25mm x0.7mm 0.40 RM 62.00 1 RM
Providing and fixing Thermocole False ceiling in true horizontal level 600mm x 600mm using 12mm thick Thermocole sheet, anodized Aluminium Tee section
BLD-CSTN-10-
24.50mm x 24.0mm x 2.4mm in grid with cross tee of size 24mm x 24.5mm at every 600mm center to center and anodised aluminium wall angle of size 24mm x 24m
34 & vide Page
109 periphery of the wall and the above grid is suspended at every 1200mm center to center in both directions using 2.0mm thick GI wire for finished of size 600mm
No. 392 of SoR
including cost and conveyance of all materials and labour charges such as cutting , fixing of standing of frame work exposing roof complete for finished item of work in
2011-12
(The rate is inclusive of overheads & contractor profit).
Unit 1 sqm
A) Material requirement
MAT-01271 BMT-M.36 12mm Thermocole sheet 1.00 sqm 32.00 1 sqm
MAT-01250 BMT-M.15 Aluminium angle - 24mmx 24mm 0.40 RM 33.00 1 RM
MAT-01251 BMT-M.16 Anodised Aluminium T section - 24mm x 24.5mm x 2.4mm 3.20 RM 32.00 1 RM
MAT-01262 BMT-M.27 GI rod-prestraightened 2.0mm dia. - Connecting rod 1.28 Nos. 10.00 1 No.
MAT-01253 BMT-M.18 Rawl plugs 1.28 Nos. 4.00 1 No.
B) Labour charges
LAB-00004 CSoR I - 4 1st Class Carpenter 0.11 Nos. 705.00 1 No.
LAB-00060 CSoR II - 4 2nd Class Carpenter 0.11 Nos. 565.00 1 No.
LAB-00004 CSoR I - 4 Power Saw cutter - Hand Operated - Operator 0.02 Nos. 705.00 1 No.
LAB-00004 CSoR I - 4 Power Drill - Hand Operated - Operator 0.04 Nos. 705.00 1 No.
LAB-00120,
CSoR III - 3,4 Unskilled Mazdoor 0.20 Nos. 525.00 1 No.
LAB-00121
Add for MAA @ 20% 0.20 284.46
C) Machinery
MAT-00206 BMC-X.02 Power Saw cutter - Hand Operated - Hire Charges 0.16 Hours 132.00 1 hour
MAT-00207 BMC-X.03 Power Drill - Hand Operated - Hire Charges 0.32 Hours 121.00 1 hour
Supplying and fixing 50mm dia nominal bore Medium Grade properties & weight as per IS 1239 ISI mark MS Tube for fixing of GI Sheet including cost and conveya
110
materials to work site and all operational, incidental, labour charges etc., complete for finished item of work in all floors for stair case head room roof.
Say
Supplying and fixing of Pre-painted Galvalume Trapezoidal Profile Roofing sheets with 0.50mm thickness, Coating: Alu-Zinc coating AZ150 GSM. Tensile Stre
MPA. Paint coating: Regular Modified Polyester painting. Painting Thickness (Top): 18 to 20 Microns, (Bottom): 5 to 7 Microns. Sheet Width: 1.020, Length: Maximum 1
111 BLD-CSTN-8-1 with Regular Range Colours fixed with G.I ‘J’ bolts & nuts 8 mm dia with bitumen & G.I limpet washers filled with white lead & including a coat of approved steel prime
coats of approved paint on over lapping of sheets complete (up to a pitch of 600) etc., complete, excluding the cost of purlins, rafters, trusses including cost and conv
all materials , labour charges , overheads and contractors profit etc., complete for finished item of work in all floors.
Unit : 10 sqm
A. MATERIALS:
MAT-01625 BMS-W.55 Galvalume sheet 0.50mm thick 10.50 sqm 407.00 1 sqm
MAT-01632 BMS-W.62 G.I scam bolts & nuts 2 x 27 (laps) x 17 = 884 47.91 Nos. 6.00 1 No.
MAT-01636 BMS-W.66 Limpet washers (for scam & ‘J’ bolts) 91.82 Nos. 2.00 1 No.
MAT-01637 BMS-W.67 Bitumen washers 91.82 Nos. 2.00 1 No.
B. LABOUR
For roofing
LAB-00060 CSoR II - 4 Carpenter II class 0.84 Nos. 565.00 1 No.
LAB-00120,
CSoR III - 3,4 Man mazdoor (beldar) 0.91 Nos. 525.00 1 No.
LAB-00121
Add for MAA @ 20% 0.20 952.35
Rate per 10 sqm
Rate per 1 sqm
Overheads&Contractors Profit @13.615% 0.13615 655.40
Rate per 1 sqm
Say
Supply and delivery of encapsulated plastic steps for man holes manufactured as per companies standard specification including cost of materials packing as per co
1 BLD-CSTN-8-1 standards, loading, transportation, unloading and stacking at site of work , and taxes such as complete sales tax,C.E.D and others etc., as applicable including labou
for fixing, overheads and contractor profit etc., complete for finished item of work.
Overheads&C
Rate as per
ontractors
MAT-01310
SSR
Profit 1.00 sqm 166.00 1 sqm 166.00
@13.615% 0.13615 166.00 22.60
CIVIL DATA 2020-21 : Page-786
Rate for 1
sqm 188.60
Say 189
Supply and placing in postion water stopper 8 - 10 mm thick 310 mm wide including cost and conveyance of all materials to site and sales and other taxes on all materi
1 BLD-CSTN-8-1
etc., complete for finished item of work
Overheads&C
Rate as per
ontractors
MAT-01310
SSR
Profit 1.00 sqm 495.00 1 sqm 495.00
@13.615% 0.13615 495.00 67.39
Rate for 1
sqm 562.39
Say 562
Providing, laying Reinforced cement concrete Hume pipes of 300mm Dia., NP-3 class for cross ducts including cost and conveyance of Pipes etc., complete an
2 charges for laying, jointing of 300mm dia. R.C.C Hume pipes in position including lifting, aligning, lowering and hoisting etc., as per drawing and as per MoRT&H Spe
2900, 2905 and 2906 (5th revision) and IRC Special Publication No: 13 and as directed by the Engineer-in-Charge for finished item of work
ROAD WORKS
Forming embankment with Side earth by mechanical means including pre-watering of soil, removal of top soil, excavation of soils, depositing the soils on the emb
spreading soils, breaking clods, sectioning and consolidation with Vibratory Road Roller @ OMC to meet requirement of table 300-2 of MoRT&H, including al
112 RBR-EECD-4 - 4 -
operational charges of T&P and seigniorage charges, complete for finished item of work as per MoRT&H specification 305 (4th revision) including cost and conveya
materials , labour charges , overheads and contractors profit etc., complete for finished item of work (Payment will be made based on level for finished item of work).
Unit = cum
Taking output = 100 cum 100.00 Cum
a) Labour
Mate - day
LAB-00120,
CSoR III - 3, 4 Mazdoor (Unskilled) 0.52 day 525.00 1.00 day
LAB-00121
b) Machinery
Hydraulic Excavator 0.9 cum bucket capacity @ 60 cum
HIR-00052 CSoR 4 1.67 hr 3483.70 1 hr
per hour
HIR-00073 CSoR 3 Motor grader for grading @ 200 cum per hour 1.00 hour 3722.00 1 hr
HIR-00076 CSoR 10 Water tanker 6 kl capacity 4.00 hour 806.00 1 hr
HIR-00062 CSoR 7 Vibratory Roller 80 - 100 kN 1.00 hour 3479.20 1 hr
MAT-00332, CSoR M -
c) Water 24 Kl 116.00 1 Kl
MAT-00333 189(a), (b)
Total
d) Overheads & Contractors Profit 0.13615 19299.98
Cost for 100 cum
Rate per cum = (a+b+c+d)/100
Rate per cum Say
CIVIL DATA 2020-21 : Page-788
Construction of Granular sub-base by providing HBG material confirming to Grading - III of MORT & H Table 400-2 including cost and conveyance of all materi
site and spreading in uniform layers with motor grader or by approved means, on prepared surface mixing by mix place method with Rotavator/ approved means, at
RBR-SBSS-
113 compacting with vibratory roller to achieve the desired density etc., complete for finished item of work as per MoRT& H specification 401 (4th revision) and as direct
2/2(A)
Engineer- in - charge including cost and conveyance of all materials , labour charges , overheads and contractors profit etc., complete for finished item of work (Payme
made based on levels for finished item of work)
Unit : 1 cum
Taking output : 300 cum
a) Labour
Mate day 1 day
LAB-00120,
CSoR III - 3, 4 Mazdoor (Unskilled) 2.40 day 525.00 1.00 day
LAB-00121
LAB-00120,
CSoR III - 3, 4 Mazdoor (Unskilled) 8.00 day 525.00 1.00 day
LAB-00121
Add for MAA @ 20% 0.20 5460.00
b) Machinery
HIR-00073 CSoR 3 Mortar Grader 110 HP @ 50 cum per hour 6.00 hr 3722.00 1 hr
HIR-00062 CSoR 7 Vibratory roller 8T 6.00 hr 3479.20 1 hr
HIR-00076 CSoR 10 Water tanker 6 KL 3.00 hr 806.00 1 hr
c) Material Grading III
Coarse graded Granular sub-base Material 9.5 mm to
MAT-00194 CSoR M - 025 255.00 cum 1038.30 1 cum
4.75 mm @ 66%
Coarse graded Granular sub-base Material 2.36 mm &
MAT-00191 CSoR M - 022 below @ 34% 129.00 cum 931.30 1 cum
MAT-00332, CSoR M -
Water 18.00 Kl 116.00 1 Kl
MAT-00333 189(a), (b)
Construction of un-reinforced, dowel jointed at expansion and construction joint only, plain cement concrete pavement, thickness as per design, over a pre
base, with 43 grade cement or any other type as per Clause 1501.2.2 M 30 (Grade), coarse and fine aggregates conforming to IS : 383, maximum in a concrete mixer o
than 0.2 cum capacity and appropeiate weigh batcher using approved mix design, laid in approved fixed side formwork (steel channel, laying and fixing of 125 mic
polythene film, wedges, steel plates including levelling the formwork as per drawing), spreading the concrete with sholvels, rakes, compacted using needle, scareed
114 RBR-CCPV-5
vibrators and finished in continuous operation including provision of contraction and expansion, construction joints, applying debonding strips, primer, sealant, dowel b
approaches to bridge / culvert and construction joints, admixtures as approved, curing of concrete slabs for 14- days, curing compound (where specified) and water fi
lines and grade as per drawing and Technical Specification Clause 1501 MORD including cost and conveyance of all materials , labour charges , overheads and c
profit etc., complete for finished item of work.
Unit = cum
Taking output = 75 cum (172.50 t) 75 cum
(100 x 3.75 x 0.200)
a) Labour
Mate day -
LAB-00011 CSoR I -11 Mason 1st Class 5.00 day 630.00 1 day
LAB-00091 CSoR II - 35 Mason (2nd class) 5.00 day 565.00 1 day
LAB-00120,
CSoR III - 3, 4 Mazdoor (Unskilled) 150.00 day 525.00 1 day
LAB-00121
LAB-00120,
CSoR III - 3, 4 Mazdoor (Skilled) 6.00 day 525.00 1 day
LAB-00121
LAB-00120,
CSoR III - 3, 4 Mazdoor ( semi skilled) 6.00 day 525.00 1 day
LAB-00121
Blacksmith for cutting of dowel bars including removal of
LAB-00002 CSoR I - 2 1.00 day 590.00 1 day
burrs, fabrications & fixing of dowel bars.
Add for MAA @ 20% 0.20 91615.00
b) Machinery
HIR-00016& LAB- Concrete mixer 0.28 / 0.4 cum capacity (6 mixers) with
CSoR 16 36.00 hour 188.10 1 hour
00329 weigh batcher and suitable capacity calibrated water tank
HIR-00150 CSoR 16 crew charges 36.00 hour 306.80 1 hour
Add for MAA @ 20% 0.20 11044.80
HIR-00040& LAB-
CSoR 40 Needle vibrator hire charges 9.00 hour 38.20 1 hour
00352
HIR-00174 CSoR 40 crew charges 9.00 hour 220.90 1 hour
Add for MAA @ 20% 0.20 1988.10
Screed vibrator 9.00 hour 50.00 1 hour
Plate vibrator 9.00 hour 48.00 1 hour
Concrete joint cutting machine for initial & final cuts 4.00 hour 100.00 1 hour
HIR-00076 CSoR 10 Water tanker 6 kl capacity) 5.00 hour 806.00 1 hour
CIVIL DATA 2020-21 : Page-790
HIR-00003& LAB-
CSoR 3 Air Compressor 2 hour 1452.80 1 hour
00319
crew charges 2.00 hour 294.50 1 hour
Add for MAA @ 20% 0.20 589.00
c) Material
Providing, Laying, Spreading and compacting graded HBG/HBG crushed stone aggregate to Wet Mix macadem specification
cost
Pageof110,111
all materials and including
of MoRT&H SDB premixing the material with water at OMC in Mechanical mix plant carriage of mixed material by
Unit = cum
Taking output = 225 cum
A) Labour
CIVIL DATA 2020-21 : Page-791
45 to 22.40mm IRC&MoRT&H HBG M/C metal@ 30% 89.10 cum 1346.93 1.00 cum
(Av. Of 40-45, 25-27, 19-22mm )
22.4 to 2.36mm IRC&MoRT&H HBG M/C metal@40% 118.80 cum 1076.88 1.00 cum
(Av. Of 19-22mm, 12-14mm, 9.5-11.2mm, 5-7mm, 2.36 -
5mm )
2.36mm to 75 micron @ 30% (2.36mm & below) 89.10 cum 547.00 1.00 cum
Total
D)Over head charges @
Add for Over head charges on (A)+(B)+( C) 0.05 373275.98
Providing and applying primer coat with Bitumen Emulsion (Slow Setting-1) on the prepared surface of granular base
clearing
Page 123ofofroad surfaceSDB
MoRT&H and sparaying primer at the rate of 0.70kg/sqm using mechanical means for finished item of work as per
Unit = Sqm
Taking output =3500 Sqm
A) Labour
Mate 0.08 Nos. 610.50 1 No.
Mazdoor 2.00 Nos. 525.00 1 No.
Add for MAA @ 25% 0.25 1098.84
CIVIL DATA 2020-21 : Page-792
Total
B) Machinery
Mechanical broom Hydraulic @ 1250 sqm/hr. -HIR-00081
2.80 hours 446.00 1 Hour
Air compressor 250 cfm -HIR-00136 2.80 hours 612.70 1 Hour
Bitumen pressure distributor @1750 sqm/hr -HIR-00082 2.00 hours 1603.00 1 Hour
Water tanker 6 KL capacity -HIR-00076 1.00 hours 691.00 1 Hour
Total
C)Material
@ 0.70 Kgs/sqm 2.45 MT 35105.00 1.00 MT
Cost of water 6.00 KL 806.00 1.00 KL
Total
D)Over head charges @
Add for Over head charges on (A)+(B)+( C) 0.05 99078.16
Providing and applying tack coat with bitumen VG-10 bitumen using pressure distributor at the rate of 0.2Kgs per sqm on the
bituminous/granular
Page 124 of MoRT&H surface
SDB cleaned with mechanical broom for finished item of work as per MoRT&H Specification 503 (5th revisio
Unit = Sqm
Taking output =3500 Sqm
A) Labour
Mate 0.08 Nos. 610.50 1 No.
Mazdoor 2.00 Nos. 525.00 1 No.
Add for MAA @ 25% 0.25 1098.84
Total
B) Machinery
Mechanical broom Hydraulic @ 1250 sqm/hr. -HIR-00081
2.80 hours 446.00 1 Hour
Air compressor 250 cfm -HIR-00136 2.80 hours 612.70 1 Hour
Bitumen pressure distributor @1750 sqm/hr -HIR-00082 2.00 hours 1603.00 1 Hour
Total
C)Material
Bitumen VG-10 @ 0.20 Kgs/sqm 0.70 MT 55625.00 1.00 MT
CIVIL DATA 2020-21 : Page-793
Total
D)Over head charges @
Add for Over head charges on (A)+(B)+( C) 0.05 46481.41
Providing and laying of 50mm thick Bituminous Macadam with hot mix plant producing an average output of 37.5 tonnes per h
hard
Page blasted granite
125,126,127 of crushed
MoRT&Haggregates
SDB of Grading - II as per table 500-4 of MoRT&H specificaion 504 (5th revision) prem
Unit = cum
Taking out put = 205 cum (450 tonne)
A) Labour
Mate 0.84 Nos. 610.50 1 No.
Mazdoor working with HMP, mechanical broom, paver, 14.00 Nos. 525.00 1 No.
roller, asphalt cutter and assistance for setting out lines,
levels and layout of construction.
Mazdoor skilled 5.00 Nos. 525.00 1 No.
Add for MAA @ 25% 0.25 10487.82
Total
B) Machinery
Hot Mix Plant 40 to 60 TPH -HIR-00087 12.00 hours 26556 1 Hour
Air compressor 250 cfm -HIR-00136 2.20 hours 612.70 1 Hour
Mechanical Paver finisher 100 TPH -HIR-00089 6.00 hours 3815 1 Hour
Generator 250 KVA - HIR-00110 6.00 hours 2522 1 Hour
Front end loader 1 cum capacity -HIR-00074 6.00 hours 1983 1 Hour
Smooth wheeled roller 8-10 tonnes for initial break down
rolling -HIR-00075 3.90 hours 1726.1 1 Hour
Vibratory roller 8 - 10 tonne -HIR-00062 3.90 hours 3479.2 1 Hour
Finish rolling with 6-8 tonnes smooth wheeled tandem
roller. HIR-00091 3.90 hours 2165 1 Hour
Total
C)Material
Bitumen 60/70 @ 3.3 % of weight of mix=205x2.2=450
tonne 14.85 MT 56425.00 1.00 MT
ii) Aggregate
Total weight of mix = 450 tonnes
weight of bitumen - 14.85 tonnes
CIVIL DATA 2020-21 : Page-794
IRC &MORT&H HBG M/C chips 25 to 10mm @ 40% 116.04 cum 1447.93 1.00 cum
Average rate of IRC&MoRT&H HBG M/C metal of sizes
25-27mm, 19-22mm, 12-14mm, 9.5-11.2mm
IRC &MORT&H HBG M/C chips 10 to 5mm @ 40% 116.04 cum 986.05 1.00 cum
Average rate of IRC&MoRT&H HBG M/C metal of sizes
9.5-11.2mm, 5 to 7mm
IRC &MORT&H HBG M/C chips 5mm and below @ 20% 58.02 cum 608.00 1.00 cum
Average rate of IRC&MoRT&H HBG M/C metal of sizes
2.36 to 5mm and 2.36mm& below
Total
D)Over head charges @
Add for Over head charges on (A)+(B)+( C) 0.05 1567419.75
Providing and Laying 30mm thick Bituminous concrete with 40-60 TPH HMP /100 to 120 TPH batch type hot mix plant u
crushed aggregates of Grading-2 as per table 500-17 of Specification 507 of MoRT&H (5th revesion), premixed with Bituminious bind
Grade @ 5.4% of mix and filler, transporting the hot mix to work site, laying with paver finisher to the required grade, level and a
rolling with smooth wheeled,vibratory and tandem rollers to achieve the desired compaction as per MoRT&H Specification 507 (5th
complete for finished item of work in all respects excluding seiniorage charges and as directed by Engineer-in-charge
Mazdoor working with HMP, Mechanical broom, 14.00 Nos. 525.00 1 No.
paver,roller,asphalt cutter and assistance for setting
outlines,levels and layout of construction.
Skilled Mazdoor for checking line and levels. 5.00 Nos. 525.00 1 No.
Add for MAA @ 25% 0.25 10487.82
Total
B) Machinery
Hot mix Plant – 100 TPH capacity- HIR-00085 6.00 hours 29614 1 Hour
Mechanical Paver finisher 100 TPH -HIR-00089 6.00 hours 2805 1 Hour
Generator 250 KVA - HIR-00110 6.00 hours 2522.00 1 Hour
Front end loader 1 cum capacity -HIR-00074 6.00 hours 1983.00 1 Hour
Power road roller 8 tonne for initial break down rolling -
HIR-00075 3.90 hours 1726.10 1 Hour
Pneumatic road Roller -HIR-00092 3.90 hours 1768 1 Hour
Finish rolling with 6-8 tonnes smooth wheeled tandem
roller. HIR-00091 3.90 hours 2165.00 1 Hour
Total
C)Material
(I) Bitumen VG-30 @ 5.40% by weight of mix
=191*2.356=450 ton 24.30 MT 24991.00 1.00 MT
ii) Aggregate
total wt of mix 450T-24.30=425.70T
For Grading II
IRC &MORT&H HBG M/C chip Avg. of (14-12),(9.5-11.2)
@ 20% 56.76 cum 1478.65 1.00 cum
IRC &MORT&H HBG M/C chipsAvg. of (9.5-11.2),( 5-7)
25% 70.95 cum 986.05 1.00 cum
IRC &MORT&H HBG M/C chips2.36 to 5mm, 2.36 & 150.410
above 53% cum 501.00 1.00 cum
Filler @ 1% of weight of aggregates. 2.838 cum 547.00 1.00 cum
Filler (Cement) @ 1% of weight of aggregates. 4.257 MT 4220.00 1.00 MT
Total
D)Over head charges @
Add for Over head charges on (A)+(B)+( C) 0.05 1112766.323
A T A ( SoR 2022-23)
ION OF PROPOSED DEGREE COLLEGE AT VEMPALLI
CM (1:8)
1213.80
759.60
105.00
21.00
2099.40
CIVIL DATA 2020-21 : Page-797
DATA
Amount (Rs.)
als for re-use and disposal of unserviceable materials with 100m lead as directed by Executive Engineer duly
bour charges , overheads & contractor profit etc., complete
214.73
42.95
257.67
35.08
292.75
293
1281.00
256.20
1537.20
209.29
1746.49
1746
2562.00
512.40
3074.40
418.58
3492.98
3493
2268.00
453.60
2721.60
370.55
3092.15
3092
CIVIL DATA 2020-21 : Page-798
84.00
16.80
100.80
10.08
1.37
11.45
11
498.00
99.60
597.60
81.36
678.96
679
152.00
30.40
182.40
18.24
2.48
20.72
21
182.00
36.40
218.40
21.84
2.97
24.81
25
263.00
52.60
315.60
42.97
358.57
359
CIVIL DATA 2020-21 : Page-799
60.00
12.00
72.00
7.20
0.98
8.18
8
75.00
15.00
90.00
9.00
1.23
10.23
10
55.00
11.00
66.00
6.60
0.90
7.50
7
68.00
13.60
81.60
8.16
1.11
9.27
9
CIVIL DATA 2020-21 : Page-800
tilators etc., ( wood or steel ) shutters including Chowkhats , architraves,hold fasts and other attachments etc.,
and overheads & contractors profit complete for finished item of work
56.50
105.00
28.25
37.95
227.70
31.00
258.70
259
73.45
141.75
39.55
50.95
305.70
41.62
347.32
347
s like un-reinforced concrete, reinforced concrete, brick masonry, stone masonry etc., using Dozer (D 50)
heads & contractors profit etc. complete finished item of work
1907.00
259.64
2166.64
2167
CIVIL DATA 2020-21 : Page-801
ldings, septic tank, sump, compound wall in ordinary soils and depositing on bank with an initial lead of
our charges such as shoring, sheeting, planking, strutting etc., and overheads & contractors profit complete for
S 20 B(APSS 308)
1911.00
382.20
2293.20
312.22
2605.42
260.54
261
or buildings in ordinary soils and depositing on bank for all lifts and with an initial lead of 10m and up to 3m
s shoring, sheeting, planking, strutting etc., and overheads & contractors profit complete for finished item of work
4368.00
873.60
18944.40
1957.80
391.56
26535.36
3612.79
30148.15
125.62
126
CIVIL DATA 2020-21 : Page-802
or buildings in ordinary soils and depositing on bank for all lifts and with an initial lead of 10m and 3m to 6m
as shoring, sheeting, planking, strutting etc., and overheads & contractors profit complete for finished item of
08)
4368.00
873.60
18944.40
1957.80
391.56
26535.36
3612.79
30148.15
143.56
144
uildings in ordinary rock ( not requiring blasting ) and depositing on bank with an initial lead of 10m and
es such as shoring, sheeting, planking, strutting etc., and overheads & contractors profit complete for finished
PSS 308)
2730.00
546.00
3276.00
446.03
3722.03
372.20
372
CIVIL DATA 2020-21 : Page-803
or buildings in ordinary rock (not requiring blasting) and depositing on bank for all lifts and with an initial
dental, labour charges such as shoring, sheeting, planking, strutting etc., and overheads & contractors profit
etc., as per SS 20 B(APSS 308)
3276.00
655.20
18944.40
1957.80
391.56
25224.96
3434.38
28659.34
159.22
159
CIVIL DATA 2020-21 : Page-804
rock (requiring blasting) and depositing on bank for all lifts and with an initial lead of 10m and up to 3m
s shoring, sheeting, planking, strutting etc., and overheads & contractors profit complete for finished item of work
230.10
172.50
4383.75
957.27
1452.80
37.20
294.50
920.40
242.98
238.00
168.00
9097.50
1238.62
10336.12
1033.61
1034
CIVIL DATA 2020-21 : Page-805
rock (blasting prohibited) and depositing on bank for all lifts and with an initial lead of 10m and up to 3m
s shoring, sheeting, planking, strutting etc., and overheads & contractors profit complete for finished item of work
2730.00
546.00
8716.80
223.20
1767.00
5522.40
1457.88
20963.28
2854.15
23817.43
2381.74
2382
5 KM for disposal including hire charges of T & P, labour charges etc., and overheads & contractors profit
96.00
13.07
109.07
109
CIVIL DATA 2020-21 : Page-806
h chemical toxic to subterrean tremites is apply/ inject into soil during early stage of building Construction 2.
tions conduct and chemical use as per BIS - IS 6313 (Part -2) 2013 code specification & CIB RC registered
the building which kills or repels terminates & impervious to tremite entry 3. Imidacloprid 30.5% SC (IS 63131)
5 Litres/Square meter (Sqm) of internal, external vertical surface of the colums, plinth beams (Back filling) walls
Liters/Sqm of the horizontal surface of basement top surface of the basement filling below flooring bed (Plinth)
e of a depth of 500mm around coulmns & 300mm deep around plinth beams, basements & floor filling area
Conveyance of all materials to the site, cost of labour for sparying, rodding, overheads and contractor profit etc.
gineer-in-charge
162.00
22.06
184.06
184
nd basement with initial lead in layers not exceeding 15cm thick,watering and ramming including cost and
, labour charges,hire charges of T&P etc., and overheads & contractors profit complete for fnished item of
162.75
32.55
3370.80
3566.10
35.66
3601.76
490.38
4092.14
682.02
682
ns and basement with initial lead in layers not exceeding 15cm thick,watering and ramming including cost and
labour charges,hire charges of T&P etc., and overheads & contractors profit complete for fnished item of
CIVIL DATA 2020-21 : Page-807
162.75
32.55
5496.00
5691.30
56.91
5748.21
782.62
6530.83
1088.47
1088
with a lead of 50 m in trenches, sides of foundations and basement with initial lead in layers not exceeding 15cm
water to work site and all operaitonal, incidental, labour charges, hire charges of T&P etc., and overheads &
9&310)
162.75
32.55
195.30
1.95
197.25
26.86
224.11
37.35
37
se aggregate) for foundations using coarse aggregate 40mm size hard , machine crushed granite from
capacity including cost and conveyance of all materials like cement, sand, coarse aggregate, water etc. to site
rete mixer, laying concrete in foundations and under flooring bed, ramming in 15 cm layers finishing top surface
t complete for finished item of work. (APSS No. 402)
CIVIL DATA 2020-21 : Page-808
683.64
1214.37
477.45
139.20
188.10
306.80
61.36
63.00
729.75
158.55
4022.22
547.63
4569.85
4570
CIVIL DATA 2020-21 : Page-809
rse aggregate) for foundations and under flooring bed using coarse aggregate 40mm size hard , machine
0 / 7 cft (0.2 / 0.8 cum) capacity including cost and conveyance of all materials like cement, sand, coarse
xing and hire charges of concrete mixer, laying concrete in foundations and under flooring bed, ramming in 15
d overheads & contractors profit complete for finished item of work. (APSS No. 402)
546.91
1214.37
477.45
139.20
188.10
306.80
61.36
63.00
729.75
158.55
3885.49
529.01
4414.50
4415
CIVIL DATA 2020-21 : Page-810
nd) using hard other than granite stones carted from approved quarry including cost and conveyance of all
proved quarry, to site, including labour for cutting stones to required size and shape, mixing, of cement, mortar,
plete for finished item of work in foundation and basement. (APSS No. 601 & 615)
250.67
611.33
381.48
756.00
1050.00
361.20
3410.67
34.11
3444.78
469.01
3913.79
3914
nd) using hard granite stones carted from approved quarry including cost and conveyance of all materials like
, to site including labour for cutting stones to required size and shape, mixing, of cement, mortar, construction,
ed item of work in foundation and basement. (APSS No. 601 & 615)
250.67
750.53
381.48
756.00
1050.00
361.20
3549.88
35.50
3585.38
488.15
CIVIL DATA 2020-21 : Page-811
4073.53
4074
0mm size machine crushed hard granite metal and 20mm graded machine crushed hard granite metal (coarse
xer 10 / 7 cft (0.2 / 0.8 cum) capacity including cost and conveyance of all materials like cement, fine aggregate
g and hire charges of concrete mixer, centering charges, laying concrete in position, vibrating, curing, centering
ork for footings and basement .
809.58
527.79
477.45
928.40
139.20
188.10
306.80
61.36
38.20
220.90
44.18
63.00
729.75
158.55
67.00
363.00
72.60
5195.86
707.42
5903.28
5903
CIVIL DATA 2020-21 : Page-812
orresponding to IS 456 with cement content of 380 kgs per 1 cum of concrete using weigh batcher / mixer
arse aggregate - as per IS 383 - 1970 and IS 2386 Part 1 to Part 8) from approved quarry including cost and
coarse aggregate, water etc., to site, centering using steel scaffolding pipes , jack props , wallers , foot
erational, incidental and labour charges such as weigh batching, machine mixing, lifting of concrete manually,
s profit complete but excluding cost of steel and its fabrication charges for finished item of work (APSS No. 402)
1603.60
1407.45
424.40
83.79
150.86
2415.00
529.93
311.66
631.18
50.92
294.46
185.13
139.20
8227.56
8227.56
301.00
672.00
134.40
9334.96
1270.95
10605.92
10606
CIVIL DATA 2020-21 : Page-813
8227.56
343.00
1069.00
213.80
9853.36
1341.53
11194.90
11195
8227.56
726.50
810.00
162.00
9926.06
1351.43
11277.49
11277
8227.56
67.00
363.00
72.60
8730.16
1188.61
9918.77
9919
CIVIL DATA 2020-21 : Page-814
orresponding to IS 456 with cement content of 380 kgs per 1 cum of concrete using weigh batcher / mixer
arse aggregate - as per IS 383 - 1970 and IS 2386 Part 1 to Part 8) from approved quarry including cost and
oarse aggregate, water etc., to site, centering using casurina ballies, bamboos, wooden reapers, runners,
al and labour charges such as weigh batching, machine mixing, lifting of concrete manually, laying concrete,
ut excluding cost of steel and its fabrication charges for finished item of work (APSS No. 402)
1603.60
1407.45
424.40
105.21
94.36
2940.00
627.91
311.66
631.18
50.92
294.46
185.13
139.20
8815.46
CIVIL DATA 2020-21 : Page-815
1013.78
1101.93
CIVIL DATA 2020-21 : Page-816
1322.32
1542.71
1763.09
CIVIL DATA 2020-21 : Page-817
2027.56
orresponding to IS 456 with cement content of 380 kgs per 1 cum of concrete using weigh batcher / mixer
arse aggregate - as per IS 383 - 1970 and IS 2386 Part 1 to Part 8) from approved quarry including cost and
oarse aggregate, water etc., to site, centering using casurina ballies, bamboos, wooden reapers, runners,
al and labour charges such as weigh batching, machine mixing, lifting of concrete manually, laying concrete,
ut excluding cost of steel and its fabrication charges for finished item of work (APSS No. 402)
1603.60
1407.45
424.40
42.21
75.15
1615.43
346.56
72.01
145.84
CIVIL DATA 2020-21 : Page-818
11.77
68.04
42.78
139.20
5994.41
749.30
899.16
CIVIL DATA 2020-21 : Page-819
CIVIL DATA 2020-21 : Page-820
1049.02
1198.88
orresponding to IS 456 with minimum cement content of 380 kgs per 1 cum of concrete using weigh batcher
tal (coarse aggregate - as per IS 383 - 1970 and IS 2386 Part 1 to Part 8) from approved quarry including cost
d) coarse aggregate, water etc., to site, centering using steel scaffolding pipes , jack props , wallers , foot
erational, incidental and labour charges such as weigh batching, machine mixing, lifting of concrete manually,
etc., complete but excluding cost of steel and its fabrication charges for finished item of work (APSS No. 402)
CIVIL DATA 2020-21 : Page-821
749.30
CIVIL DATA 2020-21 : Page-822
899.16
CIVIL DATA 2020-21 : Page-823
corresponding to IS 456 with cement content of 380 kgs per 1 cum of concrete using weigh batcher /
al (coarse aggregate - as per IS 383 - 1970 and IS 2386 Part 1 to Part 8) from approved quarry including cost
d), coarse aggregate, water etc., to site, centering using casurina ballies , bamboos , wooden reapers , runners ,
thick at fixed end and 5cm thick at free end with an average thickness of 6.25cm including all operational,
mixing, lifting of concrete manually, laying concrete, curing, overheads & contractors profit complete etc., but
of work (APSS No. 402, 403 & 903)
1603.60
1407.45
424.40
42.21
75.15
1615.43
346.56
72.01
145.84
29.17
139.20
5901.00
221.29
CIVIL DATA 2020-21 : Page-824
8) prop: (Cement : Sand) using common burnt clay bricks of class as per Table- I of IS:1077-1992, Non-
e having minimum crushing strength of 40 Kg/Sqcm. including cost and conveyance of all materials like cement,
mixing cement mortar, scaffolding charges, constructing masonry, lift charges, curing, etc.,and overheads &
01 & 504).
151.92
4031.54
231.20
151.20
316.40
992.25
291.97
61.66
6228.14
6228.14
847.96
7076.11
7076
CIVIL DATA 2020-21 : Page-825
in CM (1:4) prop. (Cement : Sand) using common burnt clay bricks of class as per Table- I of IS:1077-1992,
d source having minimum crushing strength of 40 Kg/Sq.cm and placing 2 Nos. of 6mm M.S plain rods in every
r joints of main brick walls where applicable including cost and conveyance of all materials like cement, steel,
es such as labour charges for mixing cement mortar, scaffolding charges, constructing masonry, lift charges,
t of steel and its fabrication charges complete for finished item of work. (APSS No. of 501 & 509)
4031.54
303.84
242.76
378.00
339.00
1443.75
432.15
71.71
7242.75
724.27
CIVIL DATA 2020-21 : Page-826
ure with fly ash cement / lime solid blocks of size 290mm x 225mm x 140mm from approved source having
conveyance of all materials like cement, sand, fly ash cement / lime solid blocks, water etc., to site, labour
ting masonry, lift charges, curing, overheads and contrctor profit etc., complete for finished item of work. (APSS
4085.33
101.28
115.60
151.20
316.40
992.25
291.97
60.54
6114.57
6114.57
832.50
6947.07
6947
CIVIL DATA 2020-21 : Page-827
M (1:4) prop. (Cement : Sand) using fly ash cement / lime solid blocks of size 290mm x 100mm x 140mm
g 2 Nos. of 6mm M.S plain rods in every third layer with free ends of the reinforcement pegged into mortar joints
ce of all materials like cement, steel, sand, fly ash cement / lime solid blocks, water etc., to site, all operational,
tar, scaffolding charges, constructing masonry, lift charges, curing, etc., and overheads & contractors profit but
shed item of work. (APSS No. of 509)
4241.74
151.92
115.60
378.00
339.00
1443.75
432.15
71.02
7173.18
717.32
CIVIL DATA 2020-21 : Page-828
raded machine crushed hard granite metal (coarse aggregate - as per IS 383 - 1970 and IS 2386 Part 1 to Part
0.8 cum) capacity including cost and conveyance of all materials like cement, fine aggregate(sand), coarse
xing, hire charges of concrete mixer, centering charges, laying concrete in position, curing etc., & lift charges ,
or finished item of work. (APSS No. 402)
1583.38
477.45
928.40
139.20
188.10
306.80
61.36
63.00
729.75
158.55
4635.99
CIVIL DATA 2020-21 : Page-829
ine crushed hard granite metal (coarse aggregate - as per IS 383 - 1970 and IS 2386 Part 1 to Part 8) from
capacity including cost and conveyance of all materials like cement, fine aggregate(sand), coarse aggregate,
harges of concrete mixer, laying concrete in position, curing etc., & lift charges , and overheads & contractors
ork. (APSS No. 402)
1583.38
477.45
1392.60
139.20
188.10
306.80
61.36
63.00
729.75
158.55
5100.19
CIVIL DATA 2020-21 : Page-830
ded machine crushed hard granite metal (coarse aggregate - as per IS 383 - 1970 and IS 2386 Part 1 to Part 8)
m) capacity including cost and conveyance of all materials like cement, fine aggregate(sand), coarse aggregate,
such as weigh batching, machine mixing, hire charges of concrete mixer, centering charges, laying concrete in
profit for steps for finished item of work. (APSS No. 402)
1583.38
477.45
1392.60
139.20
188.10
306.80
61.36
38.20
220.90
44.18
63.00
729.75
158.55
5403.47
CIVIL DATA 2020-21 : Page-831
size hard granite machine crushed graded metal (coarse aggregate - as per IS 383 - 1970 and IS 2386 Part 1 to
gs. of cement per 1 cum of concrete using concrete Mixer 10 / 7 cft (0.2 / 0.8 cum) capacity including cost and
), coarse aggregate, water etc., to site including centering, shuttering, labour charges such as weigh batching,
ift charges, curing etc., and overheads & contractors profit complete for finished item of work (APSS No. 402 &
1392.60
1374.57
477.45
83.79
150.86
1890.00
424.93
188.10
306.80
61.36
139.20
6489.65
CIVIL DATA 2020-21 : Page-832
size hard granite machine crushed graded metal (coarse aggregate - as per IS 383 - 1970 and IS 2386 Part 1 to
gs. of cement per 1 cum of concrete using concrete Mixer 10 / 7 cft (0.2 / 0.8 cum) capacity including cost and
), coarse aggregate, water etc., to site including centering, shuttering, labour charges such as weigh batching,
ift charges, curing etc., and overheads & contractors profit complete for finished item of work (APSS No. 402 &
1392.60
1374.57
477.45
42.21
75.15
1312.50
285.97
188.10
306.80
61.36
139.20
5655.91
282.80
282.80
CIVIL DATA 2020-21 : Page-833
CIVIL DATA 2020-21 : Page-834
141.40
141.40
e 500 D grade as per IS 1786-1979) of different diameters for RCC works including labour charges for
cing in position with cover blocks of approved materials and size and tying and lap-splicing with binding wire of
designs and drawings, including cost and conveyance of steel bars, including all wastages such as overlaps,
binding wire, cover blocks and all incidental, operational, labour charges such as cutting, bending, placing in
or finished item of work.( APSS No.126)
67200.00
420.00
2250.00
4130.00
5250.00
2326.00
81576.00
CIVIL DATA 2020-21 : Page-835
S 432) of different diameters including labour charges for straightening, cutting, bending to required sizes and
ls and size and tying and lap-splicing with binding wire of 18 SWG, forming grills for reinforcement work as per
e of steel bars, including all wastages such as overlaps, couplings, chairs, spacer bars including cost and
rational, labour charges such as cutting, bending, placing in position, tying etc., and overheads & contractors
66150.00
420.00
2250.00
4130.00
5250.00
2326.00
80526.00
CIVIL DATA 2020-21 : Page-836
(1:5) using screened sand including cost and conveyance of all materials like cement, sand, water etc., to site
ng cost of all labour charges for mixing mortar, finishing, curing as directed by Engineer-in-charge etc., and
SS 901,903 & 904)
182.30
173.40
283.50
593.25
1470.00
469.35
31.72
3203.52
320.35
CIVIL DATA 2020-21 : Page-837
base coat of 8mm thick in CM (1:6) and top coat of 4mm thick in CM (1:4) with dubara sponge finishing including
c., to site and all operational, incidental charges on materials and including cost of all labour charges for mixing
g grooves as directed by Engineer - in - charge etc., and overheads & contractors profit complete for finished
111.41
127.16
60.77
46.24
396.90
830.55
2047.50
654.99
42.76
4318.27
431.83
CIVIL DATA 2020-21 : Page-838
sand including cost and conveyance of all materials like cement, sand, water etc., to site and all operational,
harges for mixing mortar, finishing, curing as directed by Engineer-in-charge etc., and overheads & contractors
182.30
173.40
283.50
593.25
1470.00
469.35
31.72
3203.52
320.35
320.35
43.62
363.97
364
CIVIL DATA 2020-21 : Page-839
base coat of 16mm thick in CM(1:6) and top coat of 4mm thick in CM(1:4) with dubara sponge finishing including
c., to site and all operational, incidental charges on materials and including cost of all labour charges for mixing
g grooves as directed by Engineer-in-charge etc., and overheads & contractors profit complete for finished item
182.30
208.08
60.77
46.24
396.90
830.55
2047.50
654.99
44.27
4471.61
447.16
CIVIL DATA 2020-21 : Page-840
sand including cost and conveyance of all materials like cement, sand, water etc., to site and all operational,
harges for mixing mortar, finishing, curing as directed by Engineer-in-charge etc., and overheads & contractors
03 & 904)
255.23
242.76
283.50
593.25
1470.00
469.35
33.14
3347.23
334.72
45.57
380.29
380
CIVIL DATA 2020-21 : Page-841
s to required slopes with CM (1:3) prop. using screened sand 20mm thick (average) mixed with integral cement
ed by reputed manufacturers as approved by Engineer-in-charge at 100ml per one bag of cement, laid over roof
cement and thread lining at regular intervals of 45cmx45cm including cost and conveyance of all materials like
ational, incidental, and labour charges for mixing mortar, laying, lift charges, rendering smooth and thread lining,
verheads & contractors profit complete for finished item of work. (APSS No. 901 & 903).
425.38
242.76
41.00
415.80
870.10
1942.50
645.68
45.83
4629.05
CIVIL DATA 2020-21 : Page-842
es of sump , sump side wall,sump bottom slab,in side of septic tank , in sunken slabs etc. to required
mixed with integral cement water proofing admixture confirming to IS: 2645-2003 manufactured by reputed
one bag of cement, laid over roof slab when it is green, finished smooth with a floating coat of neat cement and
ssary including cost and conveyance of all materials like cement, sand, water proofing compound, water etc., to
, laying, lift charges, rendering smooth and thread lining, curing including rounding off junctions of wall and slab
of work. (APSS No. 901 & 903).
303.84
173.40
29.52
283.50
593.25
1470.00
469.35
33.23
3356.09
CIVIL DATA 2020-21 : Page-843
p walls, fins with rabbit wire mesh & nomianl reinforcement as directred by Engineer - In - Charge with dubara
aterials to site, operationals &incidental,cost and conveyance of cement,wire mesh,water to work
erheads & contractors profit complete for finished item of work but excluding cost of steel and its fabrication
279.30
506.40
300.56
211.00
607.68
346.80
5040.00
615.00
5250.00
2181.00
376.20
613.60
122.72
164.50
16614.76
1661.48
CIVIL DATA 2020-21 : Page-844
mm to 18 mm thick set over a base coat of CM (1:8) , 12mm thick using screened sand over already laid CC
nsistency spread @ 3.3 Kgs per sqm and jointed with neat cement to full depth including cost and conveyance
plete including all labour charges like dressing of flooring stones to the required size, mixing of cement mortar,
erheads & contractors profit complete for finished item of work. (APSS No.703 & 701)
2258.73
91.15
139.26
84.40
138.72
1953.00
621.50
451.50
605.20
63.43
6406.90
CIVIL DATA 2020-21 : Page-845
mm thick of size 0.457m x 0.457m set over a base coat of CM (1:8) , 12mm thick using screened sand over
of honey like consistency spread @ 3.3 Kgs per sqm and jointed with neat cement to full depth including cost
stones etc. complete including all labour charges like dressing of flooring stones to the required size, mixing of
ges etc., and overheads & contractors profit complete for finished item of work. (APSS No.703 & 701)
2078.38
91.15
139.26
84.40
138.72
1953.00
621.50
451.50
605.20
61.63
6224.75
CIVIL DATA 2020-21 : Page-846
iles of size 300 mm x 300 mm and thickness between 7-8 mm 1st quality conforming to IS:13711, IS:13712,
nd designs as approved by Engineer-in-charge, set over base coat of cement mortar (1:8), 12mm thick using
ing neat cement slurry of honey like consistency spread @ 3.3 Kgs per sqm & jointed neatly with white cement
ding cost of all materials like cement, screened sand , water and tiles etc., and overheads & contractors profit
3885.00
91.15
139.26
62.00
138.72
604.80
1265.60
1732.50
720.58
86.40
8726.01
ted and polished of size 600 x 600 mm and thickness between 8-10 mm 1st quality conforming to IS:13711,
hades and designs with borders and design as per the approved flooring pattern as directed by the Engineer-In
ase coat of CM (1:8) prop. 12mm thick using screened sand over CC bed already laid or RCC roof slab ,
@ 3.3 kgs per sqm. and jointed neately with white cement paste to full depth mixed with pigment of matching
ent, sand, water, tiles, white cement etc., to site (excluding cost of C.C. bed) including cost of base coat and
required slope as directed by the Engineer- in-charge etc.,and overheads & contractors profit complete for
CIVIL DATA 2020-21 : Page-847
4462.50
91.15
139.26
186.00
138.72
604.80
1265.60
1732.50
720.58
93.41
9434.52
n free full body porcelain vitrified tiles with double layer pigment of size 600 x 600 mm and thickness
IS:13630 (Parts 1 to 15) of any colour and finish in all shades and designs with borders and design as per the
, laying tiles using spacers of 2mm thick, set over a base coat of CM (1:8) prop. 12mm thick using screened
cement slurry of honey like consistancy spread @ 3.3 kgs per sqm. and jointed neately with white cement
ing cost and conveyance of all materials like cement, sand, water, tiles, white cement etc., to site (excluding
harges for mixing of cement mortar, laying tiles to required slope as directed by the Engineer- in-charge
of work. (APSS No.701 & 707)
6426.00
91.15
139.26
186.00
138.72
604.80
CIVIL DATA 2020-21 : Page-848
1265.60
1732.50
720.58
113.05
11417.66
shed granite stone slabs black colour as approved by the Engineer-in-Charge set over base coat of cement
ady laid including neat grey cement slurry of honey like consistency spread @ 3.3 Kg per sqm and jointed neatly
o full depth including cost and conveyance of all materials like cement , sand , water , granite slabs etc., to work
ing the edge , polishing charges, cost of base coat and overheads & contractors profit complete for finished item
22050.00
151.92
139.26
186.00
231.20
1890.00
565.00
4200.00
1331.00
826.12
15218.00
1283.53
480.72
48552.75
CIVIL DATA 2020-21 : Page-849
one slabs other than black and regular colours (i.e. of shades like paradiso / bala flower / copper silk / laka
pproved by the Engineer-in-Charge of length not less than 2.43 mts set over base coat of cement mortar (1:8) ,
CC roof slab including neat grey cement slurry of honey like consistency spread @ 3.3 Kg per sqm and jointed
hade to full depth including cost and conveyance of all materials like cement , sand , water , granite slabs etc., to
shing charges, cost of base coat and overheads & contractors profit complete for finished item of work (S.S.701
26250.00
151.92
139.26
186.00
231.20
1890.00
565.00
4200.00
1331.00
349.44
35293.82
CIVIL DATA 2020-21 : Page-850
6mm to 12 mm size hard granite machine crushed metal and screened sand laid over CC bed already laid or
x 1.50 m, using glass strips and finishing the top surface to required smoothness and slopes and thread lining
nd overheads & contractors profit complete for finished item of work. (APSS No.701 & 710)
259.64
506.40
90.19
787.50
33.90
1575.00
479.28
37.32
3769.23
CIVIL DATA 2020-21 : Page-851
onforming to IS: 13801 using aggregates, cement, pigments of size 300mm x 300 mm and thickness 25 mm
ase coat of cement mortar (1:6), 12 mm thick using screened sand over CC bed already laid or RCC roof slab
@ 3.3 kgs per sqm and jointed with neat white cement to full depth mixed with pigment of matching shade
water and tiles etc.,and overheads & contractors profit complete for finished item of work.
3412.50
121.54
139.26
186.00
138.72
604.80
1265.60
1732.50
720.58
83.21
8404.71
ht blue colour in Operation Theatres and labour rooms - SIKA Epoxy seamless joint free finish with 3mm
rable and non particle shedding with attractive finishing including cost and conveyance of all materials and all
finished item of work in all floors.
1862.00
253.51
2115.51
2116
CIVIL DATA 2020-21 : Page-852
f M-40 grade and thickness not less than 80 mm for medium traffic areas conforming to IS 15658:2006 in all
ding cost and conveyanace cost of all materilas like cement, sand water and Pavers etc., Complete per drawings
d conveyance of all materials and all labour charges, overheads and contractor profit etc., complete for finished
Sqm
10170.00
4200.00
2874.00
1612.00
123750.00
1200.00
6622.68
348.00
150777
670.12
91.24
761.36
761.00
CIVIL DATA 2020-21 : Page-853
m to 18 mm thick in single piece as specified set over a base coat of CM (1:5) , 12mm thick using screened
ement slurry of honey like consistency spread @ 3.3 Kgs per sqm and jointed with neat cement to full depth
water, flooring stones etc. complete including all labour charges like dressing of flooring stones to the required
harges , cost of base coat, water charges etc., and overheads & contractors profit complete for finished item of
2258.73
145.84
139.26
84.40
138.72
1953.00
621.50
451.50
605.20
1833.15
146.65
83.78
8461.73
CIVIL DATA 2020-21 : Page-854
2258.73
138.72
145.84
139.26
604.80
1265.60
1627.50
699.58
68.80
6948.83
CIVIL DATA 2020-21 : Page-855
thick in single piece as specified set over a base coat of CM (1:5) , 12mm thick using screened sand over
of honey like consistency spread @ 3.3 Kgs per sqm and jointed with neat cement to full depth including cost
stones etc. complete including all labour charges like dressing of flooring stones to the required size, flat nosing
base coat, water charges etc., and overheads & contractors profit complete for finished item of work for treads
3117.58
145.84
139.26
84.40
138.72
1953.00
621.50
451.50
605.20
1833.15
146.65
92.37
9329.17
CIVIL DATA 2020-21 : Page-856
3117.58
138.72
145.84
139.26
604.80
1265.60
1627.50
699.58
77.39
7816.27
CIVIL DATA 2020-21 : Page-857
h granite stone slabs (steel grey or pearl black) with borders and design as per the pattern approved by the
se coat of cement mortar (1:5) , 12mm thick using screened sand over CC bed already laid or RCC roof slab
ad @ 3.3 Kg per sqm and jointed neatly with white cement paste mixed with pigment of matching shade to full
, sand , water , granite slabs etc., to work site and all operational, incidental labour & lift charges, full rounding
the full length of treads , polishing charges, cost of base coat and overheads & contractors profit complete for
26250.00
145.84
139.26
186.00
138.72
1890.00
565.00
4200.00
1331.00
633.27
15098.49
1258.54
518.36
52354.49
CIVIL DATA 2020-21 : Page-858
26250.00
138.72
145.84
139.26
155.00
1266.73
101.34
1323.00
2768.50
4200.00
1658.30
381.47
38528.16
CIVIL DATA 2020-21 : Page-859
hed Shahabad/Tandur stone slabs 15mm to 18mm thick, length equal to flooring stones set over base coat of
honey like consistency spread at the rate of 3.30 kgs per sqm and jointing with white cement paste mixed with
erials like tiles, cement, sand and water etc., complete and overheads & contractors profit complete for finished
2258.73
138.72
145.84
139.26
604.80
1265.60
1627.50
699.58
68.80
6948.83
CIVIL DATA 2020-21 : Page-860
olished Kadapa stone slabs minimum of 15mm thick, length equal to flooring stones set over base coat of
honey like consistency spread at the rate of 3.30 kgs per sqm and jointing with white cement paste mixed with
erials like tiles, cement, sand and water etc., complete and overheads & contractors profit complete for finished
1983.91
138.72
145.84
139.26
604.80
1265.60
1627.50
699.58
66.05
6671.27
CIVIL DATA 2020-21 : Page-861
ble salt porcelain vitrified tiles screen printed and polished of 8 to 10mm thick of any colour and finish in all
oat of CM(1:5) 12 mm thick using screened sand with cement slurry of honey like consistency spread at the rate
with pigment of matching shade to full depth, including cost of all materials like tiles, cement, sand and water
of work.(APSS No.701 &707)
4462.50
138.72
145.84
139.26
62.00
604.80
1265.60
1732.50
720.58
92.72
9364.52
CIVIL DATA 2020-21 : Page-862
charged stain free full body porcelain vitrified tiles with double layer pigment of Size 600 x 600 mm and
s and designs, length equal to flooring tiles, flushed to wall surface to set over base coat of CM(1:5) 12 mm
sistency spread at the rate of 3.30 kgs per sqm and jointing with white cement paste mixed with pigment of
les, cement, sand and water etc.,and overheads & contractors profit complete for finished item of work.(APSS
6426.00
138.72
145.84
139.26
62.00
604.80
1265.60
1732.50
720.58
112.35
11347.66
50mmx50mm width at the corners of the all walls in Operation Theatres, labour rooms including cost and
ontractor profit etc., complete for finished item of work .
500.00
68.08
568.08
568
CIVIL DATA 2020-21 : Page-863
olished Granite 16 mm to 18 mm thick up to 8'-00 (2.43 M) other than black and regular colours, length equal
screened sand with cement slurry of honey like consistency spread at the rate of 3.30 kgs per sqm and jointing
o full depth, including cost of all materials like tiles, cement, sand and water etc., and overheads & contractors
26250.00
138.72
145.84
139.26
155.00
1266.73
101.34
1323.00
2768.50
4200.00
1658.30
381.47
38528.16
CIVIL DATA 2020-21 : Page-864
mm to 18 mm thick up to 8'-00 (2.43 M) other than black and regular colours, length equal to flooring slabs set
h cement slurry of honey like consistency spread at the rate of 3.30 kgs per sqm and jointing with white cement
ng cost of all materials like tiles, cement, sand and water etc., and overheads & contractors profit complete for
26250.00
138.72
243.07
139.26
155.00
1323.00
2768.50
4200.00
1658.30
368.76
37244.61
CIVIL DATA 2020-21 : Page-865
c wall tiles of size 300 x 450 mm / 320 mm x 400 mm and thickness 6 mm 1st quality conforming to IS:13711,
shades and designs with borders as approved by Engineer-in-Charge flushed to wall surface set over base
urry of honey like consistency spread at the rate of 3.30 kgs per sqm and jointing with white cement paste mixed
materials like tiles, cement, sand and water etc., and overheads & contractors profit complete for finished item
4305.00
138.72
145.84
139.26
186.00
485.10
420.00
181.02
60.01
6060.95
CIVIL DATA 2020-21 : Page-866
es of size 300mm x 600 mm with any type of design texture such as marble finish, wooden, bamboo, stone
mm 1st quality conforming to IS:13711, IS:13712, IS:13630 (Parts 1 to 15) of any colour and finish in all shades
n as approved by Engineer-in-Charge flushed to wall surface set over base coat of CM(1:5) 12 mm thick using
d at the rate of 3.30 kgs per sqm and jointing with white cement paste mixed with pigment of matching shade to
nd water etc., and overheads & contractors profit complete for finished item of work.
6090.00
138.72
145.84
139.26
62.00
604.80
1265.60
1732.50
720.58
108.99
11008.30
CIVIL DATA 2020-21 : Page-867
onforming to IS: 13801 using aggregates, cement, pigments of size 300 x 300 mm and thickness 20 mm of any
ng screened sand over CC bed already laid of any shades as approved by Engineer - In - Charge including neat
qm and jointed with neat white cement to full depth mixed with pigment of matching shade including cost and
,and overheads & contractors profit complete for finished item of work.
2677.50
121.54
139.26
186.00
138.72
604.80
1265.60
1732.50
720.58
75.86
7662.36
766.24
neral purpose tiles conforming to IS: 13801 using aggregates, cement, pigments of size 300 x 300 mm and
base coat of cement mortar (1:6), 12 mm thick using screened sand over PCC(1:5:10) bed 100mm thick along
ement / lime solid blocks of size 290mm x 225mm x 140mm from approved source having minimum crushing
th base coat of 8mm thick in CM (1:6) and top coat of 4mm thick in CM (1:4) for brick masonry drain, laying of
directed by the Engineer - in - charge including cost and conveyance of all materials to site, all labour charges
ctor profit etc., complete for finished item of work.
82.20
765.44
1238.20
712.52
919.48
3717.85
3098.21
421.82
3520.03
3520
CIVIL DATA 2020-21 : Page-868
0) proportion using brick jelly for low roofs including cost and conveyance of all materials like cement, sand,
ng concrete, ramming, curing , overheads & contractors profit etc., complete for finished item of work. (APSS.
546.91
1207.36
477.45
139.20
188.10
306.80
61.36
63.00
729.75
158.55
3878.48
CIVIL DATA 2020-21 : Page-869
in sunken slabs including cost and conveyance of cinder, labour charges for filling, ramming, overheads and
162.75
32.55
3900.00
4095.30
CIVIL DATA 2020-21 : Page-870
e aggregates: coarse aggregate) using 40mm size (SS5) hard granite metal (coarse aggregate) from approved
ent, fine aggregate (sand), coarse aggregate, water etc., to site including centering using Casurina Ballies ,
ates etc., shuttering, machine mixing, laying concrete, lifting concrete manually , vibrating, curing, etc., and
cluding cost of steel and it's fabrication charges for finished item of work (APSS NO. 402 & 403) for dummy
546.91
1214.37
477.45
105.21
94.36
2467.50
533.41
188.10
306.80
38.20
220.90
105.54
139.20
6437.95
CIVIL DATA 2020-21 : Page-871
ng as per approved drawing with top rail of 50mm dia pipe and 2mm thick medium class and vertical posts of
d with base plate of 25mm dia using bonding agent and anchor fastner and welding, drilling of 25mm dia holes
all members of the railing thouroughly , lacquer finishing to present seamless finish including cost and
all consumables, labour charges , overheads & contractors profit etc., complete for finished item of work.
8859.60
3081.60
217.10
390.00
390.00
195.00
13133.30
2855.07
3172.29
431.91
3604.20
3604
ramp as per approved drawing with top rail of 50mm dia pipe and 2mm thick medium class fixed in to wall with
ding, buffing, polishing all members of the railing thouroughly , lacquer finishing to present seamless finish
ng charges, cost of all consumables, labour charges , overheads & contractors profit etc., complete for finished
10888.20
3787.20
150.30
270.00
15095.70
1509.57
205.53
1715.10
CIVIL DATA 2020-21 : Page-872
1715
200mm length bars in toilets as per approved drawing with 25mm dia pipe with base plates 2 Nos., buffing,
sh including cost and conveyance of all materials, labour charges , overheads & contractors profit etc., complete
149.04
51.84
33.40
60.00
294.28
40.07
334.35
334
with single socket , 2.5mm thick 4.0 kg/sq.cm pressure of ISI marked including cost of necessary PVC Bends,
d fixing in position including cost and conveyance of all materials, operational & incidental charges including all
profit complete for finished item of work. (APSS No. 1328)
894.60
76.65
52.50
51.00
53.50
475.08
1603.33
267.22
36.38
303.60
304
CIVIL DATA 2020-21 : Page-873
as per the design approved by the Engineer-in-Charge including cost and conveyance of materials to site and
nished item of work.
388.00
37.80
33.90
144.38
43.22
647.29
ve an even shade after thouroughly brushing the surface to remove all dirt and remains of loose powdered
ental such as scaffolding , lift charges etc., and overheads & contractors profit complete for finished item of work
62.00
44.42
83.06
168.00
59.09
4.17
420.73
57.28
478.01
47.80
CIVIL DATA 2020-21 : Page-874
48
mer or Cement based of average 1 to 2 mm thickness over plastered surface to prepare the surface even and
nd remains of loose powdered materials, applying emery paper, Sand the surface, clean & wipe off loose dust,
2 - 3 hrs, sand with 180 and 320 No., emery paper for the surface preparation including cost and conveyance of
rges, over heads and contractors profit etc., complete for finished item of work in all floors for internal walls
690.00
192.47
359.91
477.75
206.02
19.26
1945.41
264.87
2210.27
221.03
221
thickness over plastered surface to prepare the surface even and smooth after thoroughly brushing the surface
ng emery paper, Sand the surface, clean & wipe off loose dust, applying putty/ texture paint filler by putty knife /
n including cost and conveyance of all materials to work site and all operational, incidental, labour charges,
ete for finished item of work in all floors for external walls
1128.84
192.47
359.91
477.75
206.02
23.65
10.80
84.70
16.94
2501.07
340.52
2841.60
284.16
CIVIL DATA 2020-21 : Page-875
284
d Washable Distemper having VOC content less than 50 grams/litre over promer coat using white cemnt as
n even shade after thourughly brushing the surface to remove all dirt and remains of loose powdered materials,
all operational, incidental, labour charges etc., and overheads & contractors profit complete for finished item of
15.50
56.40
107.35
137.70
253.80
474.60
178.43
12.24
1236.02
168.28
1404.30
140.43
140
Washable Distemper having VOC content less than 50 grams/litre as approved by Engineer-In-Charge, to
emove all dirt and remains of loose powdered materials, including cost and conveyance of all materials to work
eads & contractors profit complete for finished item of work as per APSS 911 for internal walls in all floors.
137.70
253.80
474.60
145.68
10.12
1021.90
139.13
1161.03
116.10
116
CIVIL DATA 2020-21 : Page-876
aint of shade as approved by the Engineer-In-Charge over a base coat of aproved white cement base coat
hing the surface to remove all dirt and remains of loose powdered materials, including cost and conveyance of
rges etc., and overheads & contractors profit complete for finished item of work as per SS 912 in all floors
31.00
56.40
107.35
80.72
105.75
197.75
787.50
250.95
16.17
1633.59
222.41
1856.01
185.60
186
t of shade as approved by the Engineer-In-Charge to give an even shade after thourughly brushing the surface
uding cost and conveyance of all materials to work site and all operational, incidental, labour charges etc., and
as per SS 912 in all floors.
80.72
105.75
197.75
787.50
218.20
13.90
1403.82
191.13
1594.95
159.49
159
CIVIL DATA 2020-21 : Page-877
er of interior grade I and two coats of acrylic emulsion paint having VOC (Volatile Organic Compound)
t and conveyance of all materials to site, incidental, operational and all labour charges etc.,and overheads &
160.00
148.05
276.85
152.00
253.80
474.60
230.66
16.96
1712.92
233.21
1946.13
194.61
195
r of interior grade I and two coats of synthetic polymer luxury plastic emulsion paint of superior grade
ams/litre for internal walls including cost and conveyance of all materials to site, incidental, operational and all
for finished item of work in all floors.
160.00
148.05
276.85
360.00
253.80
474.60
230.66
19.04
1923.00
261.82
2184.82
218.48
218
CIVIL DATA 2020-21 : Page-878
mer of exterior grade II and two coats of acrylic exterior emulsion paint having VOC (Volatile Organic
including cost and conveyance of all materials to site, incidental, operational and all labour charges etc.,and
n all floors.
200.00
148.05
276.85
168.00
148.05
276.85
787.50
327.46
23.33
2356.09
320.78
2676.87
267.69
268
of exterior grade II and two coats of synthetic polymer luxury plastic emulsion paint of superior grade
ams/litre for exterior walls including cost and conveyance of all materials to site, incidental, operational and all
for finished item of work in all floors.
200.00
148.05
276.85
360.00
148.05
276.85
787.50
327.46
25.25
2550.01
347.18
2897.19
289.72
290
CIVIL DATA 2020-21 : Page-879
nt or polymer or cement based of average 1 to 2 mm thickness over plastered surface to prepare the surface
e all dirt and remains of loose powdered materials, applying emery paper, Sand the surface, clean & wipe off
air dry for 2 - 3 hrs, sand with 180 and 320 No., emery paper for the surface preparation, applying one coat of
hane paint (MRF) of light green or light blue colour with 1mm thickness with anti fungal and anti bacterial
cost and conveyance of all materials to work site and all operational, incidental, labour charges, over heads and
rs for internal walls and ceiling of Operation Theatre and labour rooms.
690.00
192.47
359.91
477.75
206.02
19.26
1945.41
160.00
148.05
276.85
84.98
6.70
676.58
675.00
253.80
474.60
145.68
15.49
1564.57
4186.56
570.00
4756.55
475.66
476
CIVIL DATA 2020-21 : Page-880
nish , over a primary coat and painting two coats of synthetic enamel paint Grade-I VOC (Volatile Organic
including cost and conveyance of all materials to site cost of primer coat and all labour charges etc. complete
overheads & contractors profit complete in all floors (APSS No.1200, 1207 & 1211).
130.00
112.00
148.05
276.85
324.00
253.80
474.60
230.66
19.50
1969.46
268.14
2237.60
223.76
224
s of synthetic enamel paint Grade-II VOC (Volatile Organic Compound) content less than 50 grams/litre of
materials to site and all labour charges etc. complete and overheads & contractors profit complete in all floors
297.00
253.80
474.60
145.68
11.71
1182.79
161.04
1343.83
134.38
134
CIVIL DATA 2020-21 : Page-881
n primer paint grade - 1 of approved brand including cost and conveyance of all materials to site , all labour
oors.(APSS No. 1201, 1212 & 1207).
101.50
148.05
276.85
84.98
6.11
617.49
84.07
701.57
70.16
70
C (Volatile Organic Compound) content less than 50 grams/litre to new iron work including cost and
labour charges etc., and overheads & contractors profit complete for finished item of work in all floors. (SS No.
297.00
232.65
435.05
133.54
10.98
1109.22
151.02
1260.24
126.02
126
CIVIL DATA 2020-21 : Page-882
(Volatile Organic Compound) content less than 50 grams/litre over primer coat of red oxide to new iron
ental, operational and all labour charges etc., and overheads & contractors profit complete for finished item of
101.50
297.00
148.05
276.85
232.65
435.05
218.52
17.10
1726.72
235.09
1961.81
196.18
196
g VOC (Volatile Organic Compound) content less than 50 grams/litre to old iron work including cost and
labour charges and overheads & contractors profit etc., complete for finished item of work in all floors. (SS No.
243.00
232.65
435.05
133.54
10.44
1054.68
143.60
1198.28
119.83
120
CIVIL DATA 2020-21 : Page-883
olish of approved brand for new wood work to teak wood frame and shutters including sand papering to smooth
e, all labour charges etc., complete for finished item of work in all floors.
45.60
156.48
676.80
1265.60
388.48
25.33
2558.29
348.31
2906.60
290.66
291
e wood works duly cleaning the surface and applying emery paper, sand the wood with 180 No., emery paper
applying suitable knifing paste filler / wood filler by putty knife / muslin pad, air dry for 2 - 3 hrs, sand with 180
r dry for 24 hrs, sand with 320 No emery paper, applying one coat of approved spraying thinner (for spraying)/
se thinner (for brushing) and apply (either with spray or brush) two coats of approved brand melamine including
polish, over heads and contractors profit etc., complete for finished item of work
21.13
4.62
169.20
316.40
420.00
181.12
11.12
1123.59
152.98
1276.57
1277
CIVIL DATA 2020-21 : Page-884
/ Matt finish to the wood works duly cleaning the surface and applying emery paper, sand the wood with 180
wipe off loose dust, applying suitable knifing paste filler / wood filler by putty knife / muslin pad, air dry for 2 - 3
mponent wood sealer, after the surface preparation applying one coat of approved spraying PU thinner (for
or general purpose thinner (for brushing) and apply one coat of PU by brush or spray, air-dry overnight, sand
ond coat of PU, air drying for 4 - 6 Hrs, sand with 320 No emery paper, and applying (either with spray or brush)
es, emery papers, cost of thinner & Poly-Urethane Water Proof Polish, over heads and contracors profit etc.,
48.75
4.62
169.20
316.40
420.00
181.12
11.40
1151.49
156.78
1308.27
1308
ine rolled CRCA laths, interlocked together through their entire length and jointed together at the ends by end-
nominal bore MS B class pipe with brackets, plates, guide channels, stoppers, bottom locking plates and
ns including cost of hood cover and springs complete, painted with one coat of approved steel primer, locks, ball
plete for finished item of work as per special spn: 1108
4025.00
548.00
4573.00
4573
ble channel of 20 x10x2 mm of 100 mm centre, Bracers with flat iron 40x40x6 mm with 38 mm dia steel pulleys,
with 65x65mmx8mm MS Angle and middle guide rail at site height with 65mmx8mm MS flat for the pulleys to
king arrangements, stoppers, handles, all accessories all fixtures and painted with one coat of approved steel
em of work as per special spn 1105
3508.00
477.61
3985.61
CIVIL DATA 2020-21 : Page-885
3986
expansion joints on terrace (Size : 25mm x 12mm): Application of one coat of-High performance specially
D SBR (Armstrong) / POWER n BOND SBR (EBT) / NITOBOND SBR (Fosroc) ZORIBOND SBR (PMCC)/ SIKA
N 18549 TT -S-00227E or equivalent mixing with cement as per manufacturers c] Providing and application of
ure with - OOFCRETE AR (Armstrong ) / ZORIGROUT CMG (PMCC) / POWER n GUARD ARM (EBT) /
and making the groove. d]. Providing and fixing of masking tape on top of the joint both sides. e]. Providing and
ve the depth of 12mm on the joint. f]. Providing and application of one coat of polysulphide primer with –
application of Two part Polysulphide sealant to a width of 25mm and 12mm depth with - ROOFSEAL PS
osroc)/ ZORISEAL PS (PMCC) / SIKA POLYSULPHIDE (Sika) / WATERSHIELD PSComplies with BS 4254 - 83
masking tape and providing and application of two coats of Acrylic elastomeric cementitious coating with –
SEAL PS 200 (Fosroc)/ ZORISEAL PS (PMCC) / SIKA POLYSULPHIDE (Sika) / WATERSHIELD PS including
& contractors profit etc., complete for finished item of work
702.00
95.58
797.58
798
dings, columns, beams and slabs 25 mm thick including cost and conveyance of all materials to site, all
rs profit complete for finished item of work as per approved drawing for all floors
360.00
49.01
409.01
409
pansion joint groove of width 15cm fixed to walls / columns at one edge and resting over the other block
free edge of aluminium sheet to facilitate free movement of aluminium sheet over the finished surface of
on receiver complete including cost and conveyance of all materials to site, all incidental, operational, labour
d item of work as per approved drawing (for all floors for vertical joints and bottom of slab)
282.00
165.00
447.00
68.00
9.26
77.26
CIVIL DATA 2020-21 : Page-886
77
ick of approved make with skin material 0.50 mm thick aluminium sheet cover material natural polyethylene
ame (50x25x1.5mm) angle cleats, weather sealants, rivets, GI brackets all as approved, using suitable bolts on
in all respects including all scaffolding and labour charges , overheads & contractors profit etc., complete for
on if any.
2946.00
401.10
3347.10
3347
ll formed sections made of Pre-painted Steel / Powder coated (Base steel as per IS 513 of ‘D’ quality,
ted thickness of 0.72mm. The glass holding section made of 304 grade stainless steel of 0.6mm thick as per the
at with epoxy primer of 5 – 7 microns thick, finish painted with a polyester paint of 12-16 microns thick and back
pure polyester powder up to 50-60 microns thick. The vertical section should be of 50mm x100mm x 0.72mm,
ection should be 48mm x 98mm x 1mm, cover profiles sections should be of 20mm x 58mm x 0.58mm, Glass
cluding 5mm thick Ocean Blue reflective glass. Brackets made of CRCA powder coated/Electroplated should be
ls at top & bottom as per site requirement.
, with Good U.V. Resistance Silicon to be used. Wall fixing of sections to concrete/masonry wall should be with
conveyance of all materials to site, all labour charges, incidental charges, cost of all consumables etc. and
c., complete for finished item of work in all floors.
7150.00
973.47
8123.47
8123
g fabricated from Roll formed sections made of Pre-painted Steel / Powder coated (Base steel as per IS
/sqm) with total coated thickness of 0.72mm. The glass holding section made of 304 grade stainless steel of
ners inside the colour coated steel/powder coated sections as per the design requirement. Design calculations
with epoxy primer of 5-7 microns thick and back coated with Alkyd backer of 5-7 microns or powder coated with
ame should be of 20mm x 58mm x 0.6mm, Shutter section should be of 58mm x 33mm x 0.72 mm, stiffener
– 2 Nos for each shutter and Aluminium Stays – 2 Nos. for each shutter, Aluminium Handle – 1 no. for each
rials to site, all labour charges, incidental charges, cost of all consumables etc. and scaffolding charges, form
of work in all floors.
5645.00
768.57
CIVIL DATA 2020-21 : Page-887
6413.57
6414
Fiber Ceiling tile of 595 x 595 (Square edge Fissura fine model) using hot dipped Galvanized Steel section
32 mm at every 1200 mm c/c maximum and rotary stitched cross tee of size 24 x 27 mm at every 600 mm c/c
all angle of size 19 x 19 mm fixed to periphery of the wall and the above grid is suspended at every 1200 mm c/c
ncluding cost and conveyance of all materials and labour charges such as cutting , fixing of standing of frame
mplete for finished item of work in all floor in all floors.
353.00
14.80
80.00
78.40
12.80
5.12
84.60
67.80
8.46
8.46
37.80
41.42
42.24
38.72
873.62
8.74
882.36
120.13
1002.49
1002
CIVIL DATA 2020-21 : Page-888
Fiber Ceiling tile of 595 x 595 (Square edge Fissura fine model) using hot dipped Galvanized Steel section
32 mm at every 1200 mm c/c maximum and rotary stitched cross tee of size 24 x 27 mm at every 600 mm c/c
all angle of size 19 x 19 mm fixed to periphery of the wall and the above grid is suspended at every 1200 mm c/c
ncluding cost and conveyance of all materials and labour charges such as cutting , fixing of standing of frame
mplete for finished item of work in all floor in all floors.
518.00
14.80
80.00
78.40
12.80
5.12
84.60
67.80
8.46
8.46
37.80
41.42
42.24
38.72
1038.62
10.39
1049.01
142.82
1191.83
1192
CIVIL DATA 2020-21 : Page-889
ayer false ceiling (GS-MFSC-4.1) using 12.5 mm thick Gyp Board conforming to IS 2095 - 1993 fixing to Gyp
web) of 0.55 mm thick along the perimeter of ceiling screw fixed to brick work/ partition at 610 mm c/c and
x 15mm x 15mm x 0.9 mm) from soffit at 1220 mm c/c with ceiling angle (25 mm x 10 mm x 0.55 mm) fixed with
eiling channels (with knurled web of 51.5 mm x 26 mm x 10.5 mm x 0.55 mm) fixed in direction perpendicular to
apered edge Gypboard with 25 mm drywall screws at 230 mm c/c & jointing and finishing using joint compound
& square edges with jointing compound, two coats of drywall top coat including overheads and contractor profit
227.63
49.92
89.04
65.52
27.60
18.40
2.56
3.20
72.00
17.60
8.76
22.50
84.60
67.80
16.92
13.56
8.46
16.92
37.80
49.21
42.24
77.44
1019.68
10.20
1029.88
140.22
CIVIL DATA 2020-21 : Page-890
1170.10
1170
GS-FLC-4.6)using 12.5mm thick Gyp Board sheet tiles of size 595mm x 595mm conforming to IS 2095 - 1992
x 0.70mm thick along the perimeter of ceiling screw fixed to brick work / partition at 610mm center to center and
mm x 38mm x 0.7mm) from soffit at 1220mm center to center fixed with GI Soffit Cleat, rawl plugs and steel
4mm dia GI rod with galvanised spring steel level clip of PVC unversal holding clips system at 1200mm center to
m x 595mm and finishing two coats of drywall top coat, overheads and contractor profit complete for finished item
275.00
24.80
192.00
19.20
5.12
6.40
21.44
22.50
84.60
67.80
16.92
13.56
8.46
8.46
37.80
47.52
42.24
38.72
932.54
9.33
941.87
128.23
CIVIL DATA 2020-21 : Page-891
1070.10
1070
ontal level 600mm x 600mm using 12mm thick Thermocole sheet, anodized Aluminium Tee sections of size
x 24.5mm at every 600mm center to center and anodised aluminium wall angle of size 24mm x 24mm fixed to
1200mm center to center in both directions using 2.0mm thick GI wire for finished of size 600mm x 600mm
s such as cutting , fixing of standing of frame work exposing roof complete for finished item of work in all floors.
32.00
13.20
102.40
12.80
5.12
76.14
61.02
14.10
28.20
105.00
56.89
21.12
38.72
566.71
5.67
572.38
77.93
650.31
650
roperties & weight as per IS 1239 ISI mark MS Tube for fixing of GI Sheet including cost and conveyance of all
es etc., complete for finished item of work in all floors for stair case head room roof.
387.60
153.00
30.60
18.36
589.56
CIVIL DATA 2020-21 : Page-892
80.27
669.83
670
Profile Roofing sheets with 0.50mm thickness, Coating: Alu-Zinc coating AZ150 GSM. Tensile Strength: 550
g Thickness (Top): 18 to 20 Microns, (Bottom): 5 to 7 Microns. Sheet Width: 1.020, Length: Maximum 12 Meters
dia with bitumen & G.I limpet washers filled with white lead & including a coat of approved steel primer and two
o a pitch of 600) etc., complete, excluding the cost of purlins, rafters, trusses including cost and conveyance of
c., complete for finished item of work in all floors.
4273.50
287.46
482.90
183.64
183.64
474.60
477.75
190.47
6553.96
655.40
89.23
744.63
745
manufactured as per companies standard specification including cost of materials packing as per companiess
of work , and taxes such as complete sales tax,C.E.D and others etc., as applicable including labour charges
ed item of work.
CIVIL DATA 2020-21 : Page-893
mm wide including cost and conveyance of all materials to site and sales and other taxes on all materials to site
f 300mm Dia., NP-3 class for cross ducts including cost and conveyance of Pipes etc., complete and Labour
position including lifting, aligning, lowering and hoisting etc., as per drawing and as per MoRT&H Specification
No: 13 and as directed by the Engineer-in-Charge for finished item of work
88.20
262.50
1575.00
367.50
11462.50
941.38
14697.08
1175.77
160.08
1335.85
1336.00
CIVIL DATA 2020-21 : Page-894
cluding pre-watering of soil, removal of top soil, excavation of soils, depositing the soils on the embankment,
ith Vibratory Road Roller @ OMC to meet requirement of table 300-2 of MoRT&H, including all hire and
for finished item of work as per MoRT&H specification 305 (4th revision) including cost and conveyance of all
complete for finished item of work (Payment will be made based on level for finished item of work).
273.00
5817.78
3722.00
3224.00
3479.20
2784.00
19299.98
2627.69
21927.67
219.28
219.00
CIVIL DATA 2020-21 : Page-895
al confirming to Grading - III of MORT & H Table 400-2 including cost and conveyance of all material to work
roved means, on prepared surface mixing by mix place method with Rotavator/ approved means, at OMC and
c., complete for finished item of work as per MoRT& H specification 401 (4th revision) and as directed by the
ials , labour charges , overheads and contractors profit etc., complete for finished item of work (Payment will be
0.00
1260.00
4200.00
1092.00
22332.00
20875.20
2418.00
264766.50
120137.70
2088.00
439169.40
1463.90
199.31
1663.21
1663.00
CIVIL DATA 2020-21 : Page-896
nd construction joint only, plain cement concrete pavement, thickness as per design, over a prepared sub
1.2.2 M 30 (Grade), coarse and fine aggregates conforming to IS : 383, maximum in a concrete mixer of not less
proved mix design, laid in approved fixed side formwork (steel channel, laying and fixing of 125 mictron thick
work as per drawing), spreading the concrete with sholvels, rakes, compacted using needle, scareed and plate
of contraction and expansion, construction joints, applying debonding strips, primer, sealant, dowel bars, near
s as approved, curing of concrete slabs for 14- days, curing compound (where specified) and water finishing to
use 1501 MORD including cost and conveyance of all materials , labour charges , overheads and contractors
3150.00
2825.00
78750.00
3150.00
3150.00
590.00
18323.00
6771.60
11044.80
2208.96
343.80
1988.10
397.62
450.00
432.00
400.00
4030.00
CIVIL DATA 2020-21 : Page-897
2905.60
589.00
117.80
119124.00
35808.75
110775.00
6290.63
7408.80
1824.00
751.50
289.80
9272.00
2088.00
2472.00
437721.76
13131.65
450853.41
61383.69
512237.10
6829.83
6830
g and compacting graded HBG/HBG crushed stone aggregate to Wet Mix macadem specification including
ding premixing the material with water at OMC in Mechanical mix plant carriage of mixed material by tipper to
CIVIL DATA 2020-21 : Page-898
293.04
1050.00
5250.00
1648.26
8241.30
12837.00
10800.00
11898.00
16830.00
13568.88
2418.00
68351.88
120011.76
127933.34
48737.70
296682.80
18663.80
391939.78
39193.98
431133.76
1916.15
1916
mer coat with Bitumen Emulsion (Slow Setting-1) on the prepared surface of granular base including
paraying primer at the rate of 0.70kg/sqm using mechanical means for finished item of work as per MoRT&H
48.84
1050.00
274.71
CIVIL DATA 2020-21 : Page-899
1373.55
1248.80
1715.56
3206.00
691.00
6861.36
86007.25
4836.00
90843.25
4953.91
104032.07
10403.21
114435.27
32.70
33
coat with bitumen VG-10 bitumen using pressure distributor at the rate of 0.2Kgs per sqm on the prepared
eaned with mechanical broom for finished item of work as per MoRT&H Specification 503 (5th revision) and as
48.84
1050.00
274.71
1373.55
1248.80
1715.56
3206.00
6170.36
38937.50
CIVIL DATA 2020-21 : Page-900
38937.50
2324.07
48805.48
4880.55
53686.03
15.34
15.00
m thick Bituminous Macadam with hot mix plant producing an average output of 37.5 tonnes per hour using
aggregates of Grading - II as per table 500-4 of MoRT&H specificaion 504 (5th revision) premixed with
512.82
7350.00
2625.00
2621.96
13109.78
318672.00
1347.94
22890.00
15132.00
11898.00
6731.79
13568.88
8443.50
398684.11
837911.25
CIVIL DATA 2020-21 : Page-901
168017.22
114421.24
35276.16
1155625.87
78370.99
1645790.74
164579.07
1810369.82
8831.07
8831.00
m thick Bituminous concrete with 40-60 TPH HMP /100 to 120 TPH batch type hot mix plant using HBG
g-2 as per table 500-17 of Specification 507 of MoRT&H (5th revesion), premixed with Bituminious binder VG-30
er, transporting the hot mix to work site, laying with paver finisher to the required grade, level and alignment,
bratory and tandem rollers to achieve the desired compaction as per MoRT&H Specification 507 (5th Revision)
ork in all respects excluding seiniorage charges and as directed by Engineer-in-charge
512.82
CIVIL DATA 2020-21 : Page-902
7350.00
2625.00
2621.96
13109.78
177684.00
16830.00
15132.00
11898.00
6731.79
6895.20
8443.50
243614.49
607281.30
83928.17
69960.25
75355.41
1552.39
17964.54
856042.06
55638.32
1168404.64
116840.46
1285245.10
6729.03
6729
WS & SA DATA 2021-22 - Page : 903
2 Constructing 904.0 mm (3’0”) dia brick masonry inspection chamber as per IS - 4111: Part-1:1986 with cement mortar (1:6) prop using 2nd Class Clay Bricks
of 225 mm thick from approved source having a minimum crushing strength of 5 N/sq.mm including plastering with cement mortar 1:3 prop; ½” thick both inside
and outside fitted with 20” dia RCC manhole covers and frames including excavating pits up to a depth of 904 mm (3'-0") in all sorts of soils (exculding rock)
and laying cement conrete (1:4:8) 150 mm thick using 40 mm HBG Metal and P.C.C. 1:2:4 benching and channel 100 mm thick as per Standard specification and
including cost and conveyance of all materials like cement, sand, bricks, water etc., to site and all incidental and operational, labour charges like mixing cement
mortar, constructing masonry, lift charges, curing , overheads & contractors profit etc., complete for finished item of work as per Standard specification.
3 Constructing 904.0 mm (3’0”) dia brick masonry inspection chamber as per IS - 4111: Part-1:1986 with cement mortar (1:6) prop using 2nd Class Clay Bricks
of 225 mm thick from approved source having a minimum crushing strength of 5 N/sq.mm including plastering with cement mortar 1:3 prop; ½” thick both inside
and outside fitted with 20” dia RCC manhole covers and frames including excavating pits up to a depth of 1524 mm (5'-0") in all sorts of soils (exculding rock)
and laying cement conrete (1:4:8) 150 mm thick using 40 mm HBG Metal and P.C.C. 1:2:4 benching and channel 100 mm thick as per Standard specification and
including cost and conveyance of all materials like cement, sand, bricks, water etc., to site and all incidental and operational, labour charges like mixing cement
mortar, constructing masonry, lift charges, curing , overheads & contractors profit etc., complete for finished item of work as per Standard specification.
4 Constructing 457.2 mm x 457.2 mm (1'6"x1'6") brick in CM 1:6 prop. Masonry. Inspection chamber upto 914.4 mm (3'0") and fitted with light weight 457.2
mm x 457.2 mm (1'6"x1'6") C.I frame and cover of 20 Kg including cost and conveyance of all materials like cement, sand, bricks, water etc., to site and all
incidental and operational, labour charges like mixing cement mortar, constructing masonry, lift charges, curing , overheads & contractors profit etc., complete for
finished item of work as per Standard specification.
5 Supplying and fixing of SWG Gully traps 150mm x 100mm of ISI make confirming to IS 651 & 4127 with C.I grating & constructing cement brick masonry in CM
(1:6) prop., intermediate chamber and fitted with 304.8 mm X 288.6 mm (12"x9") C.I Frame with hinged cover of standard make as approved including cost and
conveyance of all materials to site, labour charges, overheads & contractors profit etc., complete for finished item of work.
6 Supplying and fixing of 4" (101.6mm) multi floor trap with jali - UPVC/SWR pipe fittings as per site requirements with standard practice for all floors including
cost and conveyance of all materials to site, labour charges , overheads & contractors profit etc., complete for finished item of work.
7 Supplying and fixing 580mm x 440mm long Orissa pan white glazed Water Closet 1st quality ISI marked confirming to IS:2556-Part-3-1981 with "P" or "S"
trap, ISI marked and providing masonry seat, CC squatting plate and 10 litres capacity single flush PVC low level cistern with internal components fixed on 2
Nos. of teak wood blocks of size 76.20mm x 101.60mm using required size of nails, screws as approved by Engineer-in-charge, angle stop cock 12.70mm dia.
first quality Indian make heavy duty, 12.70mm PVC connection with brass union nuts CP coated , 31.75mm brass plumber union, P trap or S trap of Indian W.C.
shall be encased on CC (1:2:4) 150mm alround well above the joint to stop leakage at the joint etc., complete including cost and conveyance of all materials to
site, cost of CC bed, labour charges, overheads & contractors profit etc., complete for finished item of work.
8 Supplying and fixing European Water Closet of 1st quality conforming to IS:2556-Part-2-1973 of white glazed with 'S' trap,supplying and fixing best Indian
make plastic seat and lid for European water closets with rubber or plastic Buffers as per IS 2548-1996 and 10 litres capacity single flush PVC low level cistern
with internal components and fixed using required size of nails and screws, angle stop cock 12.70mm dia. first quality Indian make heavy duty, 12mm PVC
connections with brass union nuts CP coated including cost and conveyance of all materials to site, overheads & contractors profit etc., complete for finished item
of work for all floors.
MAT-01790 BMW-D.14 Cost of EWC with 'S' trap 1 No 1889.00 1 Each 1889.00
LAB-00168 BMW-D.15 Add MA on labour charges for fixing EWC 0.20 300.00 60.00
MAT-01895 BMW-G.08 Supply and fixing of 10 lts. Capacity lowdown PVC flushing tank 1 No 1390.00 1 Each 1390.00
MAT-01791 BMW-D.16 Plastic seat and lid for European Water Closet and rubber buffers 1 No 850.00 1 Each 850.00
WS & SA DATA 2021-22 - Page : 907
Add MA on labour charges for fixing Plastic seat and lid for EWC and
LAB-00169 BMW-D.17 rubber buffers
0.20 87.00 17.40
MAT-01812 BMW-E.05 Angle stop cock 12.70mm 1 No. 453.00 1 Each 453.00
LAB-00178 BMW-E.06 Add MA on labour charges for fixing angle stop cock 0.20 49.00 9.80
MAT-02172 BMW-I.48 12.70mm dia PVC connection with brass union nuts 1 No 95.00 1 Each 95.00
Add MA on labour charges for fixing PVC connection with brass union
LAB-00282 BMW-I.49 nuts
0.20 19.00 3.80
LAB-00280 BMW-I.46 Cutting holes in brick masonry 1 No. 54.00 1 Each 54.00
Add MA on labour charges for cutting holes in brick masonry
0.20 54.00 10.80
MAT-02171 BMW-I.42 Cost of 76.2 x 101.60 mm teakwood blocks 2 Nos 25.00 1 Each 50.00
LAB-00277 BMW-I.43 Add MA on labour charges for fixing Teak wood blocks 0.20 11.00 2.20
4885.00
Overheads&Contractors Profit @13.615% 0.13615 4885.00 665.09
5550.09
Rate per Each 5550
WS & SA DATA 2021-22 - Page : 908
9 Supplying and fixing Indian make Flat Back Wash Hand Basin 1st quality conforming to IS:2556-Part-4:1972 of size 550mm x 400mm with 32 mm nominal
size C.P. Fitting with parallel pipe thread conforming to IS:2963-1979 and fitted with 15 mm nominal bore Chromium Plated Pillar Tap of 1st quality Indian make
heavy duty complete with standard CI brackets including wooden blocks ,1 No.12.70mm PVC connection with brass union nuts CP coated , angle stop cock
12.70mm dia. first quality Indian make heavy duty, 31.75mm dia. PVC flexible waste pipe 914.4mm length of 1st quality including cost and conveyance of all
materials to site, labour charges , overheads & contractors profit for finished item of work
MAT-01798 BMW-D.24 Cost of Wash hand basin 1 No. 1736.00 1 Each 1736.00
LAB-00170 BMW-D.28 Add MA on labour charges for fixing Wash hand basin 0.20 362.00 72.40
MAT-01812 BMW-E.05 Angle stop cock 12.70mm 1 No. 453.00 1 Each 453.00
LAB-00178 BMW-E.06 Add MA on labour charges for fixing angle stop cock 0.20 49.00 9.80
MAT-02172 BMW-I.48 12.70mm PVC connection with brass union nuts 1 No. 95.00 1 Each 95.00
Add MA on labour charges for fixing PVC connection with brass union
LAB-00282 BMW-I.49 nuts
0.20 19.00 3.80
MAT-02158 BMW-I.18 Deduct cost of NP chain and rubber plug 1 No. 41.00 1 Each -41.00
MAT-01892 BMW-G.05 31.75mm dia. PVC flexible waste pipe 1 No. 24.00 1 Each 24.00
2353.00
Overheads&Contractors Profit @13.615% 0.13615 2353.00 320.36
2673.36
Rate per Each say 2673
10 Supplying and fixing NP soap dish heavy type of approved make ISI quality with NP screws etc., complete including cost and conveyance of all materials,
labour charges for fixing , overheads & contractors profit for finished item of work in all floors
MAT-02163 BMW-I.28 Cost of NP soap dish 1 No. 231.00 1 Each 231.00
LAB-00271 BMW-I.29 Add for MAA @ 20% 0.20 14.00 2.80
233.80
Overheads&Contractors Profit @13.615% 0.13615 233.80 31.83
265.63
Rate per Each say 266
11 Supplying and fixing TV shape mirror with plastic frame of size 609.6mm x 457.2mm , plywood back with NP screws 1st quality including cost and
conveyance of all materials, labour charges , overheads & contractors profit for finished item of work in all floors.
MAT-02206 BMW-I.105 Rate as per SoR 1 No. 502.00 Each 502.00
LAB-00306 BMW-I.106 Add for MAA @ 20% 0.20 132.00 26.40
528.40
Overheads&Contractors Profit @13.615% 0.13615 528.40 71.94
600.34
Rate per Each say 600
WS & SA DATA 2021-22 - Page : 909
12 Supplying and fixing of 25.4mm dia , 609.6mm long aluminium anodized towel rods with brackets and aluminium screws including cost and conveyance of
all materials, labour charges , overheads & contractors profit for finished item of work.
13 Supplying and fixing steel surgical long elbow action handle 12.7mm dia bib cock as approved by the Engineer-In-Charge including cost and conveyance of
all materials, labour charges , overheads & contractors profit complete for finished item of work in all floors.
14 Supplying and fixing NP bib taps of size 12.70mm dia of Indian make heavy duty (short body) as approved by the Engineer-In-Charge including cost and
conveyance of all materials, labour charges , overheads & contractors profit complete for finished item of work in all floors.
15 Supplying and fixing NP bib taps of size 12.70mm dia of Indian make heavy duty (long body) as approved by the Engineer-In-Charge including cost and
conveyance of all materials, labour charges , overheads & contractors profit complete for finished item of work in all floors.
MAT-01813 BMW-E.07 Rate as per SoR 1 No. 387.00 Each 387.00
LAB-00179 BMW-E.08 Add for MAA @ 20% 0.20 33.00 6.60
393.60
Overheads&Contractors Profit @13.615% 0.13615 393.60 53.59
447.19
Rate per Each say 447
1 Supply & fixing bib cock cum health faucet with 1 m long flexible tube and wall hook ofJaquar make queen series with 7 years warranty Chrome plated including
overheads & contractors profit for finished item of work in all floors.
WS & SA DATA 2021-22 - Page : 910
16 Supplying and fixing of SWR PVC pipes (Prince/Sudhakar/Kisan/Supreme or any ISI brand) 4 Kg/Sq.cm. and fixing all special such as plain bends, off sets,
door bends, single junctions, double junctions as per site requirement, fixing with PVC clamps if necessary with required number of Bombay nails including cost
and conveyance of all materials to site, labour charges, overheads & contractors profit complete for finished item of work at all floor levels. (APSS No. 1302 1319
& 1326)
a) 75mm dia
Data for 6 RM
MAT-01898 BMW-G.11 Cost of 75mm dia pipe 6.00 RM 236.00 3 RM 472.00
MAT-01991 BMW-G.104 Cost of PVC clamps 3 Nos. 15.00 Each 45.00
LAB-00259 BMW-G.152 Labour charges 6.00 RM 79.00 1 RM 474.00
991.00
Rate per 1 RM 165.17
Overheads&Contractors Profit @13.615% 0.13615 165.17 22.49
187.66
say 188
b) 90mm dia
Data for 6 RM
MAT-01899 BMW-G.12 Cost of 90mm dia pipe 6.00 RM 375.00 3 RM 750.00
MAT-01992 BMW-G.105 Cost of PVC clamps 3 Nos. 16.00 Each 48.00
LAB-00259 BMW-G.152 Labour charges 6 RM 79.00 1 RM 474.00
1272.00
Rate per 1 RM 212.00
Overheads&Contractors Profit @13.615% 0.13615 212.00 28.86
240.86
say 241
c) 110mm dia
Data for 6 RM
MAT-01900 BMW-G.13 Cost of 110mm dia pipe 6.00 RM 447.00 3 RM 894.00
MAT-01993 BMW-G.106 Cost of PVC clamps 3 Nos. 17.00 Each 51.00
LAB-00259 BMW-G.152 Labour charges 6 RM 79.00 1 RM 474.00
1419.00
WS & SA DATA 2021-22 - Page : 911
d) 160mm dia
Data for 6 RM
MAT-01919 BMW-G.32 Cost of 160mm dia pipe 6.00 RM 1066.00 3 RM 2132.00
MAT-01994 BMW-G.107 Cost of PVC clamps 3 Nos. 33.00 Each 99.00
LAB-00259 BMW-G.152 Labour charges 6 RM 79.00 1 RM 474.00
2705.00
Rate per 1 RM 450.83
Overheads&Contractors Profit @13.615% 0.13615 450.83 61.38
512.21
say 512
17 Supply and fixing of Ashirvad/ Ajay/ Astral Flowguard or equivalent CPVC Pipes and Fittings SDR 11 to meet the requirement of ASTM-D 2846 and are
produced in CTS (Copper Tube Sizes 1/2" to 2") for hot and cold water (IS 15778:2007) including cost and conveyance of all materials to site, labour charges for
fixing, overheads & contractors profit complete for finished item of work at all floor levels.
a) 15.90mm OD pipe
MAT-02318 BMW-I.226 Rate as per SoR 1 No. 68.00 Each 68.00
Overheads&Contractors Profit @13.615% 0.13615 68.00 9.26
Rate per 1 RM 77.26
say 77
b) 22.20mm OD pipe
MAT-02319 BMW-I.227 Rate as per SoR 1 No. 103.00 Each 103.00
Overheads&Contractors Profit @13.615% 0.13615 103.00 14.02
Rate per 1 RM 117.02
say 117
c) 28.60mm OD pipe
MAT-02320 BMW-I.228 Rate as per SoR 1 No. 160.00 Each 160.00
Overheads&Contractors Profit @13.615% 0.13615 160.00 21.78
Rate per 1 RM 181.78
say 182
d) 34.90mm OD pipe
MAT-02321 BMW-I.229 Rate as per SoR 1 No. 254.00 Each 254.00
Overheads&Contractors Profit @13.615% 0.13615 254.00 34.58
Rate per 1 RM 288.58
say 289
WS & SA DATA 2021-22 - Page : 913
e) 41.30mm OD pipe
MAT-02322 BMW-I.230 Rate as per SoR 1 No. 348.00 Each 348.00
Overheads&Contractors Profit @13.615% 0.13615 348.00 47.38
Rate per 1 RM 395.38
say 395
f) 54.00mm OD pipe
MAT-02323 BMW-I.231 Rate as per SoR 1 No. 535.00 Each 535.00
Overheads&Contractors Profit @13.615% 0.13615 535.00 72.84
Rate per 1 RM 607.84
say 608
18 Supplying & fixing GI pipe Medium Grade properties & weight as per IS 1239 ISI mark in ground or on wall including cost of tees, elbows, bends, reducers,
couplings, running joints, union flanges, unions etc. with necessary excavation in all types of soils except rock requiring blasting, refilling, chiselling masonry walls
and making good the walls & floors to the original surface and fixing MS clamps on TW blocks on walls including cost and conveyance of all materials and labour
charges , overheads & contractors profit complete for finished item of work.
19 Supplying and fixing 65 mm Nominal Bore GI pipe Medium Grade properties & weight as per IS 1239 in ground or on wall with GI fittings such as elbows
tees couplings, nipples, plugs including excavation for trenches and refilling the trenches ,chiselling masonry walls and making good the walls & floors to the
original surface and fixing MS clamps on TW blocks on walls including cost and conveyance of all materials and labour charges , overheads & contractors profit
complete for finished item of work except for GI bends union and GI connectors with checkout and socket Tata or Zenith make or equivalent
20 Supplying and fixing Gunmetal Gate ( GM peet ) valve as per IS-778 Class - I , Indian make heavy type including cost and conveyance of all materials , labour
charges , overheads & contractors profit complete for finished item of work.
21 Providing and placing on terrace (at all floor levels)polyetheylene water storage tank with double layer approved brand and manufacture with cover and
suitable locking arrangement and making necessary holes for inlet and outlets and over flow pipes but without fittings and base support for tanks including cost
and conveyance of all materials and labour charges , overheads & contractors profit complete for finished item of work.
MAT-01889 BMW-G.01 Rate as per SoR 1 Ltr 8.50 1 Ltr 8.50
LAB-00258 BMW-G.02 Add for MAA @ 20% 0.20 1.00 0.20
8.70
WS & SA DATA 2021-22 - Page : 917
22 Supplying and fixing of stainless steel sink of size 508.00mm x 457.2mm x 203.20mm, 1mm thick of Indian make fixed on cantilever brackets including
supply and fixing 31.75mm C.P. waste coupling, 31.75 mm dia PVC flexible waste pipe of 914.4 mm length of Ist quality ncluding chiselling brick masonry wall
and making good & restoring to original surfaces , overheads & contractors profit complete for finished item of work in all floors
MAT-02215 BMW-I.123 Rate as per SoR 1 No 5142.00 Each 5142.00
MAT-02216 BMW-I.124 Add for MAA @ 20% 0.20 509.00 101.80
LAB-00280 BMW-I.46 Cutting holes in brick masonry 1 No. 54.00 1 Each 54.00
5297.80
Overheads&Contractors Profit @13.615% 0.13615 5297.80 721.30
6019.10
Rate per Each say 6019
23 Supplying and fixing of stainless steel sink of size 914.4 mm x457.2mm, 1mm thick of Indian make fixed on cantilever brackets including supply and fixing
31.75mm C.P. waste coupling, 31.75 mm dia PVC flexible waste pipe of 914.4 mm length of Ist quality ncluding chiselling brick masonry wall and making good &
restoring to original surfaces overheads & contractors profit complete.for finished item of work in all floors.
24 Supplying and fixing of vitreous porcelain sink of size 600 mm x 400 mm x 250mm of Indian make fixed conforming to IS:2556-Part-5-1994 on cantilever
brackets with 32 mm nominal size C.P. Fitting with parallel pipe thread conforming to IS:2963-1979, PVC flexible waste pipe of 914.4 mm length of Ist quality
including supply and fixing all materials, chiselling brick masonry wall and making good & restoring to original surfaces, overheads & contractors profit complete.for
finished item of work in all floors.
25 Supplying and fixing of vitreous porcelain sink of size 750 mm x 450 mm x 250mm of Indian make fixed conforming to IS:2556-Part-5-1994 on cantilever
brackets with 32 mm nominal size C.P. Fitting with parallel pipe thread conforming to IS:2963-1979, PVC flexible waste pipe of 914.4 mm length of Ist quality
including supply and fixing all materials, chiselling brick masonry wall and making good & restoring to original surfaces, overheads & contractors profit complete.for
finished item of work in all floors.
26 Supplying and fixing white glazed flat back Bowl urinals of size 440 mm x 265 mm x 315 mm with integral flushing rim fixed with screws complete Indian
make (HSW/Parry/Neycer) conforming to IS:2556-1995 as approved by Engineer-in-charge, including supply and fixing 12.7mm PVC connection with brass
plumber union nuts CP coated, 12.70mm push cock 1st quality of approved make , 31.75 mm dia PVC flexible waste pipe of 914.4 mm length of Ist quality
including cost and conveyance of all materials to site, labour charges , overheads & contractors profit complete for finished item of work for all floors.
27 Supplying and fixing white glazed flat back half stall urinals of size 590 mm x 375 mm x 390 mm with integral flushing rim fixed with screws complete Indian
make (HSW/Parry/Neycer) conforming to IS:2556-1995 as approved by Engineer-in-charge, including supply and fixing 12.7mm PVC connection with brass
plumber union nuts CP coated, 12.70mm push cock 1st quality of approved make , 31.75 mm dia PVC flexible waste pipe of 914.4 mm length of Ist quality
including cost and conveyance of all materials to site, labour charges etc., overheads & contractors profit complete for finished item of work for all floors.
28 Supplying and fixing of 16mm to 20 mm thick polished marble slab partitioins of size 4' 0" x 2' 0" for urinals including full rounding the edges , fixing in
position, polishing, including cost and conveyance of all materials and labour charges , overheads & contractors profit complete for finished item of work for all
floors.
MAT-00781 BMT-B.14 Rate as per SoR 0.72 Sqm 1070.00 1 Sqm 770.40
MAT-02151 BMW-I.07 Chiselling the brick masonry wall 1.20 RM 34.00 1 RM 40.80
Add for MAA @ 20% 0.20 40.80 8.16
LAB-00505 BMM-V.11 Rounding the edges of marble 2.40 RM 453.00 1 RM 1087.20
Labour charges for fixing ( dadooing labour charges ) 0.72 Sqm 905.10 10 Sqm 65.17
Add for MAA @ 20% 0.20 65.17 13.03
1984.76
Overheads&Contractors Profit @13.615% 0.13615 1984.76 270.23
2254.99
Rate per Each Say 2255
WS & SA DATA 2021-22 - Page : 920
29 Supplying and fixing of 101.60mm x 609.60mm white glazed porcelain channels 1st quality fixed in brick masonry to the required slopes , white cement
pointing including cost and conveyance of all materials and labour charges , overheads & contractors profit complete for finished item of work for all floors.
30 Construction of brick masonry support for GI pipe of size 304.80mm x 228.60mm x 228.60 mm in CM (1:8) prop including plastering and finishing with 12mm
thick in CM (1:5) including cost and conveyance of all materials and all labour charges, overheads & contractors profit complete for finished item of work for all
floors.
32 Drilling of bore well by down the hole hammer drilling to a finished dia of 165mm in all formations suitable for down the hole hammer drilling such as
medium rock formation to hard rock formation, all consolidated formation and drilling in over burden to a dia of not less than 200mm etc., and reaming the bore
well to suit insertion of casing pipe with couplings, caps and any other relavant materials up to required depth as directed by the Department including
transportation of drilling rig and supporting vehicles and including bore development (Flushing of bore well at an average pressure of 150 PSI), conducting yileld
test, consumable charges, crew charges required in fixation of pipe assembly completely done to the satisfaction of the Department and including all labour
charges, overheads and contractor profit but excluding cost of casing pipe, couplings, cap etc., The entire work shall be done as per IS - 2800 Part I & II 1979 and
amended from time to time
a) up to 90m depth
Table 38 of PH items Rate as per SoR 1.00 RM 446.40 1 RM 446.40
add 10% extra for Agency area 0.20 446.40 89.28
535.68
Overheads&Contractors Profit @13.615% 0.13615 535.68 72.93
Rate per RM 608.61
Say 609
33 Supply and fixing of 180mm dia 6 kgs/sqm PVC casing pipe including cost and conveyance of all materials and labour charges , overheads & contractors
profit complete for finished item of work
34 Supply and fixing of 180mm dia PVC bore cap including cost and conveyance of all materials and labour charges , overheads & contractors profit complete for
finished item of work
Table 38 of PH items Rate as per SoR (Table 38 of PHE items) 1.00 RM 300.00 1 RM 300.00
Overheads&Contractors Profit @13.615% 0.13615 300.00 40.85
Rate per Each 340.85
Say 341
ABSTRACT ESTIMATE FOR SECURITY BUILDING
Amount
Sl.No. Description of Work Quantity Unit Rate
(Rs.)
1 Earth work excavation for foundations (Mechanical Means) for 25.00 ONE CUM #REF! #REF!
buildings in ordinary soils and depositing on bank for all lifts and
with an initial lead of 10m and up to 3m depth including all
operational,incidental, labour charges such as shoring, sheeting,
planking, strutting etc., and overheads & contractors profit
complete for finished item of work excluding dewatering charges
etc., as per SS 20 B(APSS 308)
2 Pre construction Anti termite treatment is a process in which 33.00 ONE Sqm #REF! #REF!
chemical toxic to subterrean tremites is apply/ inject into soil
during early stage of building Construction 2. Treatement of soil
Beneath the building and around the foundations conduct and
chemical use as per BIS - IS 6313 (Part -2) 2013 code
specification & CIB RC registered termiticide which creates a
continuous chemical barrier beneath the building which kills or
repels terminates & impervious to tremite entry 3. Imidacloprid
30.5% SC (IS 63131) dissolve 2.1 Ml/1 liter of water and apply
emulsion/solution @ 7.5 Litres/Square meter (Sqm) of internal,
external vertical surface of the colums, plinth beams (Back filling)
walls and floor junction, external perimeters, along reatining wall
@ 5.0 Liters/Sqm of the horizontal surface of basement top
surface of the basement filling below flooring bed (Plinth) & @ 2.0
Litres/ Line meter at expansion joints. The substructure of a
depth of 500mm around coulmns & 300mm deep around plinth
beams, basements & floor filling area including excavation
channel along the wall & rodding etc. cost & Conveyance of all
materials to the site, cost of labour for sparying, rodding,
overheads and contractor profit etc. complete for furnished item
of work as per the approval of the Engineer-in-charge
3 Plain Cement Concrete (1:4:8) (cement: fine aggregate: 2.10 ONE CUM #REF! #REF!
Coarse aggregate) for foundations using coarse aggregate
40mm size hard , machine crushed granite from approved
quarry using concrete Mixer 10 / 7 cft (0.2 / 0.8 cum) capacity
including cost and conveyance of all materials like cement, sand,
coarse aggregate, water etc. to site including all charges for
machine mixing and hire charges of concrete mixer, laying
concrete in foundations and under flooring bed, ramming in 15
cm layers finishing top surface to the required level curing
etc.,and overheads & contractors profit complete for finished
item of work. (APSS No. 402) For Foundation
4 Plain Cement Concrete (1:5:10) (cement: fine aggregate: 4.20 ONE CUM #REF! #REF!
Coarse aggregate) for foundations and under flooring bed
using coarse aggregate 40mm size hard , machine crushed
granite from approved quarry using concrete Mixer 10 / 7 cft
(0.2 / 0.8 cum) capacity including cost and conveyance of all
materials like cement, sand, coarse aggregate, water etc. to site
including all charges for machine mixing and hire charges of
concrete mixer, laying concrete in foundations and under flooring
bed, ramming in 15 cm layers finishing top surface to the required
level curing etc.,and overheads & contractors profit complete for
finished item of work. (APSS No. 402)
5 Filling with useful available excavated earth (excluding rock) 20.00 ONE CUM #REF! #REF!
with a lead of 50 m in trenches, sides of foundations and
basement with initial lead in layers not exceeding 15cm thick,
watering and ramming including cost and conveyance of water to
work site and all operaitonal, incidental, labour charges, hire
charges of T&P etc., and overheads & contractors profit
complete for fnished item of work (APSS NO.309&310)
6 Filling with carted gravel in trenches,sides of foundations and 28.00 ONE CUM #REF! #REF!
basement with initial lead in layers not exceeding 15cm
thick,watering and ramming including cost and conveyance of
water to work site and all peraitonal,incidental, labour
charges,hire charges of T&P etc., and overheads & contractors
profit complete for fnished item of work(APSS NO.309&310)
a) Columns :
1st Floor : 2.00 ONE CUM #REF! #REF!
c) Roof Beams :
1st Floor : 1.50 ONE CUM #REF! #REF!
d) ROOF SLABS :
i) 125mm thick :
1st Floor : 33.00 ONE SQM #REF! #REF!
e) Lintels
1st Floor : 0.60 ONE CUM #REF! #REF!
15 Providing Mild steel (MS) steel bars (Fe 250 grade as per IS
432) of different diameters including labour charges for
straightening, cutting, bending to required sizes and shapes,
placing in position with cover blocks of approved materials and
size and tying and lap-splicing with binding wire of 18 SWG,
forming grills for reinforcement work as per approved designs and
drawings, including cost and conveyance of steel bars, including
all wastages such as overlaps, couplings, chairs, spacer bars
including cost and conveyance of binding wire, cover blocks and
all incidental, operational, labour charges such as cutting,
bending, placing in position, tying etc., and overheads &
contractors profit complete for finished item of work.( APSS
No.126)
20 Plastering 12mm thick single coat in CM(1:5) using screened 12.00 ONE SQM #REF! #REF!
sand including cost and conveyance of all materials like cement,
sand, water etc., to site and all operational, incidental charges on
materials and including cost of all labour charges for mixing
mortar, finishing, curing as directed by Engineer-in-charge etc.,
and overheads & contractors profit complete for finished item of
work.(SS 901,903 & 904) for basement
29 Providing 110 mm Dia ISI marked PVC down water take pipes 3.60 ONE RM #REF! #REF!
with socket , 2.5mm thick 4.0 kg/sq.cm pressure of ISI marked
including cost of necessary PVC Bends, shoes, iron / PVC
clamps and all other accessories and fixing in position including
cost and conveyance of all materials, operational & incidental
charges including all labour charges for fixing at site etc., and
overheads & contractors profit complete for finished item of work.
(APSS No. 1328)
After fixing frame the gap between frame and adjacent finished
wall shall be filled with weather proof silicon sealant over backer
rod of required size and of approved quality, all complete as per
approved drawing & direction of Engineer-in-Charge inclusive of
cost of Single / double glass panes and silicon sealant. Note: For
uPVC frame, sash and mullion extruded profiles minus
5%tolerance in dimension i.e. in depth & width of profile shall be
acceptable.Variation in profile dimension in higher side shall be
accepted. But, no extra payment on this account shall be made.
TOTAL : #REF!
9 Plinth beams
Horizontals 2 4.860 0.230 0.350 0.78
Horizontals 1 4.860 0.230 0.450 0.50
verticals 2 4.460 0.230 0.350 0.72
Ded for col -6 0.230 0.230 0.350 -0.11
Secondary beam 1 1.800 0.230 0.450 -0.19
1.71
Say 1.71 Cum
10 Tie beams
Quantity same as Plinth beam 1.71
Say 1.71 Cum
11 Columns
Columns Upto GL
C1 6 0.230 0.300 0.800 0.33
0.33
Say 0.30 Cum
Above GL to Plinth beam level
C1 6 0.230 0.300 2.000 0.83
0.83
Say 0.80 Cum
P.B Top to Roof slab bottom
C1 6 0.230 0.300 2.875 1.19
1.19
Say 1.20 Cum
Total Columns
Columns Upto GL 0.33
above GL to PB 0.83
P.B Top to Roof slab bottom 1.19
2.35 Cum
Say 2.00 Cum
12 Roof beams
Horizontals 3 5.460 0.230 0.300 1.13
Deduction for Columns -6 0.300 0.230 0.300 -0.12
verticals 2 4.460 0.230 0.300 0.62
Deduction for Columns -6 0.230 0.230 0.300 -0.10
1.53
Say 1.50 Cum
13 Roof slab
i 125mm thick Slab
Slab area 1 6.660 3.330 22.18
Slab area 1 5.460 2.030 11.08
33.26
Say 33.00 Sqm
14 Lintels
D2 1 1.960 0.230 0.175 0.08
D3 1 1.360 0.115 0.175 0.03
D4 1 1.260 0.115 0.175 0.03
SW1 1 2.260 0.230 0.175 0.09
SW2 2 1.960 0.230 0.175 0.16
SW3 2 1.660 0.230 0.175 0.13
V 1 1.060 0.230 0.175 0.04
0.56
Say 0.60 Cum
15 RCC M20grade Nominal Mix
a 50mm thick Platforms & Lofts
Platforms
2 2.080 0.450 1.87
2 1.300 0.450 1.17
3.04
Say 3.00 Sqm
Lofts
2 2.080 0.450 1.87
1.87
Say 2.00 Sqm
c Sill slabs
SW1 1 2.100 0.230 0.150 0.07
SW2 2 1.800 0.230 0.150 0.12
SW3 2 1.500 0.230 0.150 0.10
0.30
Say 0.40 Cum
16 230mm thick brick masonary
Horizontals 2 5.460 0.230 2.575 6.47
Deduction for Columns -4 0.300 0.230 2.575 -0.71
verticals 2 4.460 0.230 2.575 5.28
Deduction for Columns -6 0.230 0.230 2.575 -0.82
Entrance steps 1 2.100 0.600 0.150 0.19
Entrance steps 1 2.100 0.450 0.150 0.14
Entrance steps 1 2.100 0.300 0.150 0.09
Deductions
D2 -1 1.500 0.230 2.100 -0.72
SW1 -1 1.800 0.230 1.300 -0.54
SW2 -2 1.500 0.230 1.300 -0.90
SW3 -2 1.200 0.230 1.300 -0.72
V5 -1 0.600 0.230 0.500 -0.07
Lintels
D2 -1 1.960 0.230 0.175 -0.08
SW1 -1 2.260 0.230 0.175 -0.09
SW2 -2 1.960 0.230 0.175 -0.16
SW3 -2 1.660 0.230 0.175 -0.13
V5 -1 1.060 0.230 0.175 -0.04
7.20
Say 7.20 Cum
21 Ceiling plastering
Qty same as Vitrified tile flooring 17.00
Qty same as Non-skid tiles 2.70
Front Projection 1 6.660 0.900 5.99
Side Projection 2 2.430 0.600 2.92
28.61
Say 29.00 Sqm
22 12mm thick plastering
a External Plastering
Allround the Building 1 19.840 3.000 59.52
Parapet wall alround 1 19.840 0.715 14.19
Deductions
SW1 -1 1.800 1.800 3.24
SW2 -2 1.500 1.800 5.40
SW3 -2 1.200 1.800 4.32
V -1 0.600 0.500 0.30
86.97
Say 87.00 Sqm
b Basement Plastering
Allround the Building 1 19.840 0.600 11.90
11.90
Say 12.00 Sqm
12 mm thick plastering Internal
c plastering
Toilet 1 6.600 2.875 18.98
Security 1 14.170 2.875 40.74
Rest room 1 10.370 2.875 29.81
Deductions
D2 1 1.500 2.100 3.15
D3 1 0.900 2.100 -1.89
D4 1 0.800 2.100 -1.68
Deduction for Dadooing with glazed tiles -8.70
80.41
Say 80.00 Sqm
29 Dadooing to walls
Toilet 1 6.600 1.500 9.90
Deductions
D4 -1 0.800 1.500 -1.20
8.70
Say 9.00 Sqm
37 Windows
i SW1 1 1.800 1.300 2.34 Sqm
SW2 2 1.500 1.300 3.90 Sqm
SW3 2 1.200 1.300 3.12 Sqm
Say 9.36 Sqm
ii Ventilators
V 1 0.600 0.500 0.30
0.30
Say 0.30 Sqm
1 MS Grill
SW1 1 1.800 1.300 2.34 Sqm
SW2 2 1.500 1.300 3.90 Sqm
SW3 2 1.200 1.300 3.12 Sqm
Say 9.36 Sqm
141.00 Kgs
2 Pre construction Anti termite treatment is a process in which 160.00 ONE SQM #REF! #REF!
chemical toxic to subterrean tremites is apply/ inject into soil
during early stage of building Construction 2. Treatement of soil
Beneath the building and around the foundations conduct and
chemical use as per BIS - IS 6313 (Part -2) 2013 code
specification & CIB RC registered termiticide which creates a
continuous chemical barrier beneath the building which kills or
repels terminates & impervious to tremite entry 3. Imidacloprid
30.5% SC (IS 63131) dissolve 2.1 Ml/1 liter of water and apply
emulsion/solution @ 7.5 Litres/Square meter (Sqm) of internal,
external vertical surface of the colums, plinth beams (Back
filling) walls and floor junction, external perimeters, along
reatining wall @ 5.0 Liters/Sqm of the horizontal surface of
basement top surface of the basement filling below flooring bed
(Plinth) & @ 2.0 Litres/ Line meter at expansion joints. The
substructure of a depth of 500mm around coulmns & 300mm
deep around plinth beams, basements & floor filling area
including excavation channel along the wall & rodding etc. cost
& Conveyance of all materials to the site, cost of labour for
sparying, rodding, overheads and contractor profit etc.
complete for furnished item of work as per the approval of the
Engineer-in-charge
2 Plain Cement Concrete (1:4:8) (cement: fine aggregate: 10.60 ONE CUM #REF! #REF!
Coarse aggregate) for foundations using coarse aggregate
40mm size hard , machine crushed granite from approved
quarry using concrete Mixer 10 / 7 cft (0.2 / 0.8 cum) capacity
including cost and conveyance of all materials like cement,
sand, coarse aggregate, water etc. to site including all charges
for machine mixing and hire charges of concrete mixer, laying
concrete in foundations and under flooring bed, ramming in 15
cm layers finishing top surface to the required level curing
etc.,and overheads & contractors profit complete for finished
item of work. (APSS No. 402) For Foundation
4 Filling with useful available excavated earth (excluding rock) 102.00 ONE CUM #REF! #REF!
with a lead of 50 m in trenches, sides of foundations and
basement with initial lead in layers not exceeding 15cm thick,
watering and ramming including cost and conveyance of water
to work site and all operaitonal, incidental, labour charges, hire
charges of T&P etc., and overheads & contractors profit
complete for fnished item of work (APSS NO.309&310)
5 Filling with carted gravel in trenches,sides of foundations and 236.00 ONE CUM #REF! #REF!
basement with initial lead in layers not exceeding 15cm
thick,watering and ramming including cost and conveyance of
water to work site and all peraitonal,incidental, labour
charges,hire charges of T&P etc., and overheads & contractors
profit complete for fnished item of work(APSS NO.309&310)
a) Columns :
First Floor : 8.00 ONE CUM #REF! #REF!
c) Roof Beams :
un supported height up to 3.66 m
First Floor : 7.40 ONE CUM #REF! #REF!
d) ROOF SLABS :
i) 125mm thick :
First Floor : 55.00 ONE SQM #REF! #REF!
e) Lintels
First Floor : 1.60 ONE CUM #REF! #REF!
19 Plastering 12mm thick single coat in CM(1:5) using 32.00 ONE SQM #REF! #REF!
screened sand including cost and conveyance of all materials
like cement, sand, water etc., to site and all operational,
incidental charges on materials and including cost of all labour
charges for mixing mortar, finishing, curing as directed by
Engineer-in-charge etc., and overheads & contractors profit
complete for finished item of work.(SS 901,903 & 904) for
basement
29 Providing 110 mm Dia ISI marked PVC down water take 11.00 ONE RM #REF! #REF!
pipes with socket , 2.5mm thick 4.0 kg/sq.cm pressure of ISI
marked including cost of necessary PVC Bends, shoes, iron /
PVC clamps and all other accessories and fixing in position
including cost and conveyance of all materials, operational &
incidental charges including all labour charges for fixing at site
etc., and overheads & contractors profit complete for finished
item of work. (APSS No. 1328)
After fixing frame the gap between frame and adjacent finished
wall shall be filled with weather proof silicon sealant over
backer rod of required size and of approved quality, all
complete as per approved drawing & direction of Engineer-in-
Charge inclusive of cost of Single / double glass panes and
silicon sealant. Note: For uPVC frame, sash and mullion
extruded profiles minus 5%tolerance in dimension i.e. in depth
& width of profile shall be acceptable.Variation in profile
dimension in higher side shall be accepted. But, no extra
payment on this account shall be made.
TOTAL : #REF!
3 PCC (1:5:10)
All round the Building 1 52.520 0.600 0.150 4.73
Deductions
C1 -5 0.450 0.600 0.150 -0.20
C1 -1 0.230 0.600 0.150 -0.02
C2 -2 0.450 0.600 0.150 -0.08
C3 -2 0.450 0.600 0.150 -0.08
under internal plinth beam
Horizontals
B1-B3 1 3.570 0.450 0.150 0.24
B3-B5 2 11.060 0.450 0.150 1.49
Ded for columns -2 0.230 0.450 0.150 -0.03
Ded for columns -2 0.450 0.450 0.150 -0.06
C2-C3 1 2.780 0.450 0.150 0.19
Verticals
A3-B3 1 2.000 0.450 0.150 0.14
B3-D3, B4-D4 2 8.500 0.450 0.150 1.15
Ded for columns -6 0.230 0.450 0.150 -0.09
Secondary beams 1 3.850 0.450 0.150 0.26
Secondary beams 1 3.960 0.450 0.150 0.27
Under Flooring
Qty same as Vitrified tile Flooring 1 77.111 0.100 7.71
Qty same as Ceramic Flooring 1 29.420 0.100 2.94
Qty same as Chequered Flooring 1 33.659 0.100 3.37
21.91
Say 22.00 Cum
10 Antitermite treatment
Alround the slab As per CAD 1 159.190 159.19
159.19
Say 160.00 Sqm
c) Plinth beams
Horizontals
A1-A3 1 3.570 0.230 0.450 0.37
B1-B3 1 3.570 0.230 0.450 0.37
B3-B5 3 11.060 0.230 0.450 3.43
Ded for columns -3 0.230 0.230 0.450 -0.07
Ded for columns -3 0.450 0.230 0.450 -0.14
C2-C3 1 2.780 0.230 0.400 0.26
D2-D3 1 2.780 0.230 0.400 0.26
Verticals
A1-B1, A3-B3 2 2.000 0.230 0.400 0.37
B2-D2 1 8.268 0.230 0.400 0.76
Ded for columns -2 0.450 0.230 0.400 -0.08
B3-D3, B4-D4 2 8.500 0.230 0.400 1.56
Ded for columns -6 0.230 0.230 0.400 -0.13
Secondary beams 1 3.850 0.230 0.400 0.35
Secondary beams 1 3.960 0.230 0.400 0.36
B5-D5 1 8.500 0.230 0.450 0.88
Ded for columns -3 0.450 0.230 0.450 -0.14
8.41
Say 8.50 Cum
d) Tie beam
Quantity same as plinth beam 8.41
Say 8.50 Cum
11 VRCC
i Columns upto GL
C1/F1 2 0.230 0.450 0.750 0.16
C1/F2 2 0.230 0.450 0.725 0.15
C1/F3 1 0.230 0.450 0.675 0.07
C1/RF1/F3 1 0.230 0.450 0.675 0.07
13 Roof slab
i) Roof Slab 125mm thick
Alround the slab As per CAD 1 159.190 159.19
Deduction of 150mm thick slab -1 11.400 8.500 -96.90
Deduction of staircase -1 4.010 2.000 -8.02
54.27
Say 55.00 Sqm
ii) Roof Slab 150mm thick
150mm thick slab 1 11.400 8.500 96.90
96.90
Say 97.00 Sqm
ii) Roof Slab 175mm thick
Staircase 2 3.500 2.000 14.00
Midlanding 1 2.115 1.000 2.12
16.12
Say 17.00 Sqm
14 Lintels
Opening at Entrance 1 2.500 0.230 0.175 0.10
D2 3 1.960 0.230 0.175 0.24
D3 3 1.360 0.115 0.175 0.08
D3 6 1.260 0.115 0.175 0.15
SW1 5 2.260 0.230 0.175 0.45
SW3 2 1.660 0.230 0.175 0.13
SW4 2 1.360 0.230 0.175 0.11
V 6 1.060 0.230 0.175 0.26
27 1.53
Say 1.60 Cum
15 Sunshades
SW1 3 2.100 6.30
SW3 2 1.500 3.00
SW4 1 1.360 1.36
6 10.66
Say 11.00 Rmt
16 Sill slabs
SW1 5 2.260 0.230 0.050 0.13
SW3 2 1.660 0.230 0.050 0.04
SW4 2 1.360 0.230 0.050 0.03
V 6 1.060 0.230 0.050 0.07
15 0.27
Say 0.30 Cum
17 Platforms
Kitchen platform 1 4.515 0.600 2.71
Wash basin 1 1.500 0.600 0.90
3.61
Say 4.00 Sqm
18 Shelves
Kitchen platform 1 4.515 0.450 2.03
2.03
Say 3.00 Sqm
21 TMT STEEL
Columns Footings 25 60.000 Kgs/Cum 1490.69
Column pedestals 3 100.000 Kgs/Cum 302.40
175 mm thick side walls 78 80.000 0.175 Kgs/Cum 1092.00
Plinth beams 8 100.000 Kgs/Cum 841.49
Tie beam 8 100.000 Kgs/Cum 841.49
Columns upto 3.60 mts levael 8 200.000 Kgs/Cum 1605.29
Dummy columns 1.3 200.000 Kgs/Cum 260.82
Roof Beams upto 3.60 mts level 7 200.000 Kgs/Cum 1480.00
125mm thick Roof slab 55 80.000 0.125 Kgs/Cum 550.00
150mm thick Roof slab 97 80.000 0.150 Kgs/Cum 1164.00
175mm thick Roof slab 16 80.000 0.175 Kgs/Cum 225.61
sill slab 0.27 80.000 Kgs/Cum 21.80
Sunshades 0.6 10.66 80.000 0.063 Kgs/Cum 31.98
Platforms & Lofts 3.61 80.000 0.050 Kgs/Cum 14.44
Lintels 2 80.000 Kgs/Cum 128.00
###
Say 10.10 MT
22 Mild Steel
RBM 135 2.000 Kgs/Sqm 270.00
RCM Facia 3.99 2.000 Kgs/Sqm 7.97
Shelves 2.03 2.000 Kgs/Sqm 4.06
282.04
Say 0.30 MT
23 RCM Facia
Front side 1 13.290 0.300 3.99
Say 4.00 Sqm
24 External plastering
All round the Building 1 52.520 3.000 157.56
Front side 1 13.290 1.915 25.45
Ded opneing -1 2.000 1.915 -3.83
Terrace
Parapet wall 1 52.520 1.915 100.58
Deductions
Grill -1 1.800 1.300 -2.34
Grill -1 3.180 1.300 -4.13
SW1 -5 1.800 1.300 -11.70
SW3 -2 1.200 0.900 -2.16
SW4 -2 0.900 1.300 -2.34
257.08
Say 258.00 Sqm
25 Ceiling plastering
Qty Same as Vitrified tile flooring 77.11
Qty Same as Ceramic tile flooring 29.42
Qty Same as Chequered flooring 33.66
140.19
Say 141.00 Sqm
26 Internal plastering 12 mm thick
Dormitory male 1 20.270 2.875 58.28
Dormitory female 1 20.270 2.875 58.28
Passage 1 21.080 2.875 60.61
Kitchen 1 12.630 2.875 36.31
W.C 6 5.400 2.875 93.15
Passage 2 10.926 2.875 62.82
Wash area 1 10.860 2.875 31.22
Staircase three sides 1 10.595 2.875 30.46
Deduct Dadooing -89.83
Deduct opening -1 2.000 2.100 -4.20
Deductions
D2 -3 1.500 2.100 -9.45
D3 -3 0.900 2.100 -5.67
D4 -6 0.800 2.100 -10.08
311.90
Say 312.00 Sqm
b) Chequered flooring
2230 mm wide portico 1 11.300 2.230 25.20
Under staircase 1 4.000 2.115 8.46
33.66
Say 34.00 Sqm
High Polished granite for kitchen
c) platform
Kitchen 1 4.515 0.600 2.71
Say 3.00 Sqm
High Polished granite for Treads &
d) Risers
i Treads
at entrance 3 3.000 0.300 2.70
Say 3.00 Sqm
ii Risers
at entrance 4 3.000 0.150 1.80
Say 2.00 Sqm
f) Impervious Coat
Terrace 1 159.190 159.19
Deduction of Stiarcase -1 4.010 2.000 -8.02
151.17
Say 152.00 Sqm
g) Skirting with vitrified tiles
Dormitory male 1 20.270 20.27
Dormitory female 1 20.270 20.27
Passage 1 21.080 21.08
Kitchen 1 12.630 12.63
Staircase three sides 1 10.595 10.60
Front passage 1 13.290 13.29
Deduct opening -2 2.000 -4.00
94.14
Say 94.00 Rmt
h) Dadooing with glazed tiles
Bath 6 5.400 1.500 48.60
Passage 2 10.920 1.500 32.76
Wash area 1 10.860 1.500 16.29
above kithcen platform 1 5.715 0.600 3.43
Deductions
D3 -3 0.900 1.500 -4.05
D4 -6 0.800 1.500 -7.20
89.83
Say 90.00 Sqm
29 SS Railing
Staircase 2 3.500 0.900 6.30
Say 7.00 Sqm
33 Doors
D2 1 3 1.500 2.100 9.45 Sqm
34 Windows
SW1 1 5 1.800 1.300 11.70
SW3 1 2 1.200 0.900 2.16
SW4 1 2 0.900 1.300 2.34
16.20
Say 16.20 Sqm
35 V
6 0.600 0.500 1.80 Sqm
36 Cupboards
Kitchen 1 4.515 0.900 4.06 Sqm
37 MS Grill
SW1 1 5 1.800 1.300 11.70
SW3 1 2 1.200 0.900 2.16
SW4 1 2 0.900 1.300 2.34
Grill 1 1 1.800 1.300 2.34
Grill 1 1 3.180 1.300 4.13
22.67 Sqm
Say 345.00 Kgs
39 Painting to Doors
D2 2.25 3 1.500 2.100 21.26 Sqm
1 Supplying and laying, filling, jointing and testing SWG SP-1 pipe
conforming to ISI 651 & 4127 with air tight Cement joints in CM (1.5:1)
prop. including excavation of trenches and socket pits in any soil
(except rock requiring blasting) and refilling with watering and tamping
to the required slope including cost and conveyance of all materials to
site and all labour charges , overheads & contractor profit etc.,
complete for finished item of work (APSS NO 1301 & 1318)
2 Supplying and fixing of SWG Gully traps 150mm x 100mm of ISI 5.00 NO #REF!
make confirming to IS 651 & 4127 with C.I grating & constructing
cement brick masonry in CM (1:6) prop., intermediate chamber and
fitted with 304.8 mm X 288.6 mm (12"x9") C.I Frame with hinged cover
of standard make as approved including cost and conveyance of all
materials to site, labour charges, overheads & contractors profit etc.,
complete for finished item of work.
5 Supplying and fixing of 4" (101.6mm) multi floor trap with jali - 12.00 NO #REF!
UPVC/SWR pipe fittings as per site requirements with standard
practice for all floors including cost and conveyance of all materials to
site, labour charges , overheads & contractors profit etc., complete for
finished item of work..
6 Supplying and fixing European Water Closet of 1st quality 2.00 NO #REF!
conforming to IS:2556-Part-2-1973 of white glazed with 'S'
trap,supplying and fixing best Indian make plastic seat and lid for
European water closets with rubber or plastic Buffers as per IS 2548-
1996 and 10 litres capacity single flush PVC low level cistern with
internal components and fixed using required size of nails and screws,
angle stop cock 12.70mm dia. first quality Indian make heavy duty,
12mm PVC connections with brass union nuts CP coated including
cost and conveyance of all materials to site, overheads & contractors
profit etc., complete for finished item of work for all floors.
7 Supplying and fixing 580mm x 440mm long Orissa pan white 2.00 NO #REF!
glazed Water Closet 1st quality ISI marked confirming to IS:2556-Part-
3-1981 with "P" or "S" trap, ISI marked and providing masonry seat,
CC squatting plate and 10 litres capacity single flush PVC low level
cistern with internal components fixed on 2 Nos. of teak wood blocks of
size 76.20mm x 101.60mm using required size of nails, screws as
approved by Engineer-in-charge, angle stop cock 12.70mm dia. first
quality Indian make heavy duty, 12.70mm PVC connection with brass
union nuts CP coated , 31.75mm brass plumber union, P trap or S trap
of Indian W.C. shall be encased on CC (1:2:4) 150mm alround well
above the joint to stop leakage at the joint etc., complete including cost
and conveyance of all materials to site, cost of CC bed, labour
charges, overheads & contractors profit etc., complete for finished item
of work.
8 Supplying and fixing Indian make Flat Back Wash Hand Basin 1st 3.00 NO #REF!
quality conforming to IS:2556-Part-4:1972 of size 550mm x 400mm
with 32 mm nominal size C.P. Fitting with parallel pipe thread
conforming to IS:2963-1979 and fitted with 15 mm nominal bore
Chromium Plated Pillar Tap of 1st quality Indian make heavy duty
complete with standard CI brackets including wooden blocks ,1
No.12.70mm PVC connection with brass union nuts CP coated , angle
stop cock 12.70mm dia. first quality Indian make heavy duty, 31.75mm
dia. PVC flexible waste pipe 914.4mm length of 1st quality including
cost and conveyance of all materials to site, labour charges ,
overheads & contractors profit for finished item of work
9 Supplying and fixing NP soap dish heavy type of approved make ISI 3.00 NO #REF!
quality with NP screws etc., complete including cost and conveyance of
all materials, labour charges for fixing , overheads & contractors profit
for finished item of work in all floors
10 Supplying and fixing TV shape mirror with plastic frame of size 3.00 NO #REF!
609.6mm x 457.2mm , plywood back with NP screws 1st quality
including cost and conveyance of all materials, labour charges ,
overheads & contractors profit for finished item of work in all floors.
11 Supplying and fixing of 25.4mm dia , 609.6mm long aluminium 3.00 NO #REF!
anodized towel rods with brackets and aluminium screws including
cost and conveyance of all materials, labour charges , overheads &
contractors profit for finished item of work.
12 Supplying and fixing white glazed flat back half stall urinals of 2.00 NO #REF!
size 590 mm x 375 mm x 390 mm with integral flushing rim fixed with
screws complete Indian make (HSW/Parry/Neycer) conforming to
IS:2556-1995 as approved by Engineer-in-charge, including supply and
fixing 12.7mm PVC connection with brass plumber union nuts CP
coated, 12.70mm push cock 1st quality of approved make , 31.75 mm
dia PVC flexible waste pipe of 914.4 mm length of Ist quality including
cost and conveyance of all materials to site, labour charges etc.,
overheads & contractors profit complete for finished item of work for all
floors
15 Supplying and fixing of stainless steel sink of size 508.00mm x 1.00 NO #REF!
457.2mm x 203.20mm, 1mm thick of Indian make fixed on cantilever
brackets including supply and fixing 31.75mm C.P. waste coupling,
31.75 mm dia PVC flexible waste pipe of 914.4 mm length of Ist
quality ncluding chiselling brick masonry wall and making good &
restoring to original surfaces , overheads & contractors profit complete
for finished item of work in all floors
16 Supplying and fixing NP bib taps of size 12.70mm dia of Indian 3.00 NO #REF!
make heavy duty (long body) as approved by the Engineer-In-
Charge including cost and conveyance of all materials, labour
charges , overheads & contractors profit complete for finished item of
work in all floors.
17 Supplying and fixing NP bib taps of size 12.70mm dia of Indian 4.00 NO #REF!
make heavy duty (short body) as approved by the Engineer-In-
Charge including cost and conveyance of all materials, labour
charges , overheads & contractors profit complete for finished item of
work in all floors.
18 Supply and fixing of Ashirvad/ Ajay/ Astral Flowguard or
equivalent CPVC Pipes and Fittings SDR 11 to meet the requirement
of ASTM-D 2846 and are produced in CTS (Copper Tube Sizes 1/2" to
2") for hot and cold water (IS 15778:2007) including cost and
conveyance of all materials to site, labour charges for fixing, overheads
& contractors profit complete for finished item of work at all floor levels
22 Providing and placing on terrace (at all floor levels)polyetheylene 1500.00 NO #REF!
water storage tank with double layer approved brand and
manufacture with cover and suitable locking arrangement and making
necessary holes for inlet and outlets and over flow pipes but without
fittings and base support for tanks including cost and conveyance of
all materials and labour charges , overheads & contractors profit
complete for finished item of work.
#REF!
#REF!
#REF!
#REF!
#REF!
#REF!
#REF!
#REF!
#REF!
#REF!
#REF!
#REF!
#REF!
#REF!
#REF!
#REF!
#REF!
#REF!
#REF!
#REF!
#REF!
#REF!
#REF!
#REF!
#REF!
#REF!
#REF!
#REF!
#REF!
#REF!
2 Gully traps 5
Say 5 Nos
3 Inspection Chambers 5
Say 5 Nos
4 Manholes
3' - 0' Depth 5
Say 5 Nos
6 Indian IWC
Ground Floor 2 2
Say 2 Nos
7 European EWC
Ground Floor 2 2
Say 2 Nos
9 Soap dish
Ground Floor 3 3
Say 3 Nos
10 Mirrors
Ground Floor 3 3
Say 3 Nos
11 Towel rods
Ground Floor 3 3
Say 3 Nos
12 Sink
Ground Floor 1 1
Say 1 Nos
13 NP bib taps
a) Long Body taps (Bath& wash Taps)
Ground Floor 3 3
Say 3 Nos
b) Long Body taps (Drinking water Taps)
Ground Floor 4 4
Say 4 Nos
14 Urinals
Ground Floor 2 2
Say 2 Nos
15 Marble Partitions
Ground Floor 1 1
Say 1 Nos
16 Porcelain Channels
Ground Floor 2 0.6 1.2
1.20
Say 2.00 Rmt
IWC
Ground Floor 2 0.3 0.60
TAPS
Long Body taps (Bath & wash Taps)
Ground Floor 3 0.9 2.70
Wash Basin
Ground Floor 3 0.8 2.40
10.80 Rmt
Say 11 Rmt
19 CPVC Pipes
Terrace Ring Main
DOMESTIC WATER
a) 40.00 mm OD 45.00 Rmt
b) 32.00 mm OD 35.00 Rmt
c) 28.60 mm OD 10.00 Rmt
21 HDPE Tank
Domestic water 1000 Litrs
Drinking water 500 Litrs
1 Earth work excavation for foundations (Mechanical Means) 75.00 One CUM #REF! #REF!
for buildings in ordinary soils and depositing on bank for all
lifts and with an initial lead of 10m and up to 3m depth
including all operational,incidental, labour charges such as
shoring, sheeting, planking, strutting etc., and overheads &
contractors profit complete for finished item of work excluding
dewatering charges etc., as per SS 20 B(APSS 308)
2 Pre construction Anti termite treatment is a process in 70.0 One Sqm #REF! #REF!
which chemical toxic to subterrean tremites is apply/ inject
into soil during early stage of building Construction 2.
Treatement of soil Beneath the building and around the
foundations conduct and chemical use as per BIS - IS 6313
(Part -2) 2013 code specification & CIB RC registered
termiticide which creates a continuous chemical barrier
beneath the building which kills or repels terminates &
impervious to tremite entry 3. Imidacloprid 30.5% SC (IS
63131) dissolve 2.1 Ml/1 liter of water and apply
emulsion/solution @ 7.5 Litres/Square meter (Sqm) of
internal, external vertical surface of the colums, plinth beams
(Back filling) walls and floor junction, external perimeters,
along reatining wall @ 5.0 Liters/Sqm of the horizontal
surface of basement top surface of the basement filling below
flooring bed (Plinth) & @ 2.0 Litres/ Line meter at expansion
joints. The substructure of a depth of 500mm around coulmns
& 300mm deep around plinth beams, basements & floor
filling area including excavation channel along the wall &
rodding etc. cost & Conveyance of all materials to the site,
cost of labour for sparying, rodding, overheads and
contractor profit etc. complete for furnished item of work as
per the approval of the Engineer-in-charge
3 Plain Cement Concrete (1:4:8) (cement: fine aggregate: 7.00 One CUM #REF! #REF!
Coarse aggregate) for foundations using coarse aggregate
40mm size hard , machine crushed granite from approved
quarry using concrete Mixer 10 / 7 cft (0.2 / 0.8 cum) capacity
including cost and conveyance of all materials like cement,
sand, coarse aggregate, water etc. to site including all
charges for machine mixing and hire charges of concrete
mixer, laying concrete in foundations and under flooring bed,
ramming in 15 cm layers finishing top surface to the required
level curing etc.,and overheads & contractors profit complete
for finished item of work. (APSS No. 402) For Foundation
5 Filling with useful available excavated earth (excluding 59.00 One CUM #REF! #REF!
rock) with a lead of 50 m in trenches, sides of foundations
and basement with initial lead in layers not exceeding 15cm
thick, watering and ramming including cost and conveyance
of water to work site and all operaitonal, incidental, labour
charges, hire charges of T&P etc., and overheads &
contractors profit complete for fnished item of work (APSS
NO.309&310)
6 Filling with carted gravel in trenches,sides of foundations 98.10 One CUM #REF! #REF!
and basement with initial lead in layers not exceeding 15cm
thick,watering and ramming including cost and conveyance of
water to work site and all peraitonal,incidental, labour
charges,hire charges of T&P etc., and overheads &
contractors profit complete for fnished item of work(APSS
NO.309&310)
e) Lintels
First floor 1.20 One CUM #REF! #REF!
b Shelves
First Floor : 5.00 One SQM #REF! #REF!
16 Providing Mild steel (MS) steel bars (Fe 250 grade as per
IS 432) of different diameters including labour charges for
straightening, cutting, bending to required sizes and shapes,
placing in position with cover blocks of approved materials
and size and tying and lap-splicing with binding wire of 18
SWG, forming grills for reinforcement work as per approved
designs and drawings, including cost and conveyance of
steel bars, including all wastages such as overlaps,
couplings, chairs, spacer bars including cost and conveyance
of binding wire, cover blocks and all incidental, operational,
labour charges such as cutting, bending, placing in position,
tying etc., and overheads & contractors profit complete for
finished item of work.( APSS No.126)
a Treads
First Floor : 2.10 One SQM. #REF! #REF!
b Risers
First Floor : 1.10 One SQM #REF! #REF!
3 PCC (1:5:10)
All round the Building 1 33.68 0.600 0.150 3.03
Deductions
Long Columns -10 0.380 0.600 0.150 -0.34
Under internal plinth beams
Horizontals
IPB1 - B1-B4 1 9.380 0.450 0.150 0.63
Ded for columns -2 0.230 0.450 0.150 -0.03
Ded for columns -2 0.300 0.450 0.150 -0.04
Secondary beams 2 2.695 0.450 0.150 0.36
Verticals
IPB1 - A2-B2, A3-B3 2 2.400 0.450 0.150 0.32
IPB2 - B2-C2, B3-C3 2 4.370 0.450 0.150 0.59
IPB1 - Secondary Beam 1 2.400 0.450 0.150 0.16
Under Flooring
Qty Same as ceramic flooring 14.792 0.100 1.48
Qty Same as Vitrified tile flooring 47.000 0.100 4.70
10.87
Say 11.00 Cum
5 Basement Filling
Qty Same as ceramic flooring 14.792 2.000 29.58
Qty Same as Vitrified tile flooring 47.000 2.000 94.00
123.58
Say 124.00 Cum
6 Total Earth to be filled 157.58
Say 158.00 Cum
9 Antitermite treatment
69.97
Say 70.00 Sqm
10 175mm thick RCC side wall
a For Foundation
Alround the Building 1 33.68 1.700 57.26
Ded for columns -10 0.380 1.700 -6.46
50.80
Say 51.00 Sqm
11 VRCC M25 design mix
a) Footings
F1 8 1.600 1.600 0.275 5.63
F2 4 1.900 1.900 0.350 5.05
10.69
Say 10.70 Cum
b) Pedestals
F1 8 0.600 0.600 0.600 1.73
F2 4 0.600 0.600 0.600 0.86
2.59
Say 2.60 Cum
c) Plinth beams
Horizontals
EPB1 - A1-A4,C1-C4 2 9.380 0.230 0.300 1.29
Ded for columns -4 0.230 0.230 0.300 -0.06
Ded for columns -4 0.380 0.230 0.300 -0.10
IPB1 - B1-B4 1 9.380 0.230 0.300 0.65
Ded for columns -2 0.230 0.230 0.300 -0.03
Ded for columns -2 0.380 0.230 0.300 -0.05
Secondary beams 2 2.695 0.230 0.300 0.37
Verticals
EPB1 - A1-B1, A4-B4 2 2.260 0.230 0.300 0.31
IPB1 - A2-B2, A3-B3 2 2.400 0.230 0.300 0.33
EPB2 - B1-C1, B4-C4 2 4.300 0.230 0.350 0.69
IPB2 - B2-C2, B3-C3 2 4.370 0.230 0.350 0.70
IPB1 - Secondary Beam 1 2.400 0.230 0.300 0.17
4.27
Say 4.30 Cum
d) Tie beams
Qty same as plinth beam 4.27
Say 4.30 Cum
12 VRCC
i Columns upto G.L
C1/F1 3 0.230 0.380 0.800 0.21
C1/F2 1 0.230 0.380 0.725 0.06
C2/F1 5 0.230 0.380 0.800 0.35
C2/F2 3 0.230 0.380 0.725 0.19
12 0.81
Say 0.90 Cum
13 Roof beams
Horizontals
A1-A4 3 9.380 0.230 0.300 1.94
Ded for columns -6 0.230 0.230 0.300 -0.10
Ded for columns -6 0.380 0.230 0.300 -0.16
Secondary beams 2 2.695 0.230 0.300 0.37
Verticals
A1-C1 4 7.460 0.230 0.300 2.06
Ded for columns -6 0.230 0.230 0.300 0.10
Ded for columns -6 0.380 0.230 0.300 0.16
Secondary beams 1 2.400 0.230 0.300 0.17
4.54
Say 4.60 Cum
14 Roof slab
i) Roof Slab 125mm thick
Alround slab As per CAD 1 9.380 7.460 69.97
69.97
Say 70.00 Sqm
15 Lintels
above Entrance opening 1 2.745 0.230 0.175 0.11
D2 1 1.960 0.115 0.175 0.04
D3 1 1.360 0.115 0.175 0.03
D6 7 1.260 0.115 0.175 0.18
SW1 2 2.260 0.230 0.175 0.18
SW2 3 1.960 0.230 0.175 0.24
SW4 1 1.360 0.230 0.175 0.05
V 7 1.060 0.230 0.175 0.30
23 1.13
Say 1.20 Cum
16 Sunshades
SW1 2 2.100 4.20
SW2 3 1.800 5.40
SW4 1 1.200 1.20
10.80
Say 11.00 Rmt
17 Sill slabs
SW1 2 2.260 0.230 0.050 0.05
SW2 3 1.960 0.230 0.050 0.07
SW4 1 1.360 0.230 0.050 0.02
0.14
Say 0.20 cum
ii Platforms
Wash basin 2 1.980 0.600 2.38
Kitchen 1 4.185 0.600 2.51
Kitchen 1 2.000 0.550 1.10
5.99
Say 6.00 Sqm
22 TMT STEEL
Columns Footings 10.7 60.000 Kgs/Cu 641.16
Pedestals 2.6 100.000 Kgs/Cu 260.00
Plinth beams 4.27 110.000 Kgs/Cu 469.21
Tie beams 4.27 110.000 Kgs/Cu 469.21
175mm thick side walls 50.8 80.000 0.175 Kgs/Cu 711.14
Columns upto 3.60 mts levael 6.56 200.000 Kgs/Cu 1311.00
Roof Beams upto 3.60 mts level 4.6 200.000 Kgs/Cu 920.00
125mm thick slab 70.0 80.000 0.125 Kgs/Cu 699.75
Lintels 1 80.000 Kgs/Cu 96.00
5577.48
Say 5.60 MT
23 Mild Steel
Platforms 6 0.075 80.000 Kgs/Cu 36.00
Lofts 2 0.050 80.000 Kgs/Cu 8.00
Shelves 5 0.025 80.000 Kgs/Cu 10.00
Sunshades 0.6 11 0.063 80.000 Kgs/Cu 32.40
Sillslab 0.14 80.000 Kgs/Cu 10.82
RBM 118 2.000 Kgs/Sq 236.00
333.22
Say 0.30 MT
24 External plastering
All round 1 33.680 3.600 121.25
Terrace
All round 1 33.680 1.915 64.50
Deductions
SW1 -2 1.800 1.800 -6.48
SW2 -2 1.500 1.800 -5.40
SKW2 -1 1.500 1.400 -2.10
SW4 -1 0.900 1.400 -1.26
V5 -7 0.600 0.500 -2.10
168.41
Say 168.00 Sqm
25 Ceiling plastering
Qty Same as ceramic flooring 14.79
Qty Same as Vitrified tile flooring 47.00
61.79
Say 62.00 Sqm
27 Basement plastering
All round the Building 1 33.68 0.600 20.21
20.21
Say 21.00 Sqm
28 Flooring
a) Non skid Ceramic Tiles
WCs 2 1.500 1.250 3.75
Lobby 1 1.980 2.630 5.21
Ch. Room 1 1.195 1.200 1.43
Toilet 1 1.500 1.200 1.80
Wash area 1 1.610 1.615 2.60
14.79
Say 15.00 Sqm
ii Risers
Entrance 1 3 2.285 0.150 1.03
1.03
Say 1.10 Sqm
35 Wall putty
Same as internal plastering 238.39
Shelves sides(top and Bottom) 9.45
Loft sides(top and Bottom) 4.00
251.84
Say 252.00 Sqm
40 Windows
SW1 2 1.800 1.800 6.48
6.48
Say 6.48 Sqm
41 Ventilators
V5 7 0.600 0.500 2.10
Say 2.10 Sqm
42 MS Grill to windows
SW1 2 1.800 1.800 6.48
SW2 2 1.500 1.800 5.40
SKW2 1 1.500 1.400 2.10
SKW4 1 0.900 1.400 1.26
Wash 1 1.490 1.800 2.68
Wash 1 1.430 1.800 2.57
20.50 Sqm
Say 315.00 Kgs
42 SS Railing
Entrance Steps wall 2 0.900 0.900 1.62
1.62
Say 2.00 Sqm
43 Cupboard
Store 1 1.500 2.100 3.15
Kitchen 1 2.000 2.100 4.20
7.35
Say 8.00 Sqm
44 Impervious coat
1 9.380 7.460 69.97
69.97
Say 70.00 Sqm
2 4.200 8.40
8.40
Say 9.00 RM
#REF!
ABSTRACT ESTIMATE FOR WATER SUPPLY & SANITARY ARRANGEMENTS
Sl. No. Description of Work Quantity Unit Rate
1 Supplying and laying, filling, jointing and testing SWG SP-1 pipe
conforming to ISI 651 & 4127 with air tight Cement joints in CM (1.5:1)
prop. including excavation of trenches and socket pits in any soil
(except rock requiring blasting) and refilling with watering and tamping
to the required slope including cost and conveyance of all materials to
site and all labour charges , overheads & contractor profit etc.,
complete for finished item of work (APSS NO 1301 & 1318)
2 Supplying and fixing of SWG Gully traps 150mm x 100mm of ISI 5.00 NO #REF!
make confirming to IS 651 & 4127 with C.I grating & constructing
cement brick masonry in CM (1:6) prop., intermediate chamber and
fitted with 304.8 mm X 288.6 mm (12"x9") C.I Frame with hinged cover
of standard make as approved including cost and conveyance of all
materials to site, labour charges, overheads & contractors profit etc.,
complete for finished item of work.
5 Supplying and fixing of 4" (101.6mm) multi floor trap with jali - 12.00 NO #REF!
UPVC/SWR pipe fittings as per site requirements with standard
practice for all floors including cost and conveyance of all materials to
site, labour charges , overheads & contractors profit etc., complete for
finished item of work..
6 Supplying and fixing European Water Closet of 1st quality 2.00 NO #REF!
conforming to IS:2556-Part-2-1973 of white glazed with 'S'
trap,supplying and fixing best Indian make plastic seat and lid for
European water closets with rubber or plastic Buffers as per IS 2548-
1996 and 10 litres capacity single flush PVC low level cistern with
internal components and fixed using required size of nails and screws,
angle stop cock 12.70mm dia. first quality Indian make heavy duty,
12mm PVC connections with brass union nuts CP coated including
cost and conveyance of all materials to site, overheads & contractors
profit etc., complete for finished item of work for all floors.
7 Supplying and fixing 580mm x 440mm long Orissa pan white 1.00 NO #REF!
glazed Water Closet 1st quality ISI marked confirming to IS:2556-Part-
3-1981 with "P" or "S" trap, ISI marked and providing masonry seat,
CC squatting plate and 10 litres capacity single flush PVC low level
cistern with internal components fixed on 2 Nos. of teak wood blocks of
size 76.20mm x 101.60mm using required size of nails, screws as
approved by Engineer-in-charge, angle stop cock 12.70mm dia. first
quality Indian make heavy duty, 12.70mm PVC connection with brass
union nuts CP coated , 31.75mm brass plumber union, P trap or S trap
of Indian W.C. shall be encased on CC (1:2:4) 150mm alround well
above the joint to stop leakage at the joint etc., complete including cost
and conveyance of all materials to site, cost of CC bed, labour
charges, overheads & contractors profit etc., complete for finished item
of work.
8 Supplying and fixing Indian make Flat Back Wash Hand Basin 1st 4.00 NO #REF!
quality conforming to IS:2556-Part-4:1972 of size 550mm x 400mm
with 32 mm nominal size C.P. Fitting with parallel pipe thread
conforming to IS:2963-1979 and fitted with 15 mm nominal bore
Chromium Plated Pillar Tap of 1st quality Indian make heavy duty
complete with standard CI brackets including wooden blocks ,1
No.12.70mm PVC connection with brass union nuts CP coated , angle
stop cock 12.70mm dia. first quality Indian make heavy duty, 31.75mm
dia. PVC flexible waste pipe 914.4mm length of 1st quality including
cost and conveyance of all materials to site, labour charges ,
overheads & contractors profit for finished item of work
9 Supplying and fixing NP soap dish heavy type of approved make ISI 4.00 NO #REF!
quality with NP screws etc., complete including cost and conveyance of
all materials, labour charges for fixing , overheads & contractors profit
for finished item of work in all floors
10 Supplying and fixing TV shape mirror with plastic frame of size 4.00 NO #REF!
609.6mm x 457.2mm , plywood back with NP screws 1st quality
including cost and conveyance of all materials, labour charges ,
overheads & contractors profit for finished item of work in all floors.
11 Supplying and fixing of 25.4mm dia , 609.6mm long aluminium 4.00 NO #REF!
anodized towel rods with brackets and aluminium screws including
cost and conveyance of all materials, labour charges , overheads &
contractors profit for finished item of work.
12 Supplying and fixing of stainless steel sink of size 508.00mm x 1.00 NO #REF!
457.2mm x 203.20mm, 1mm thick of Indian make fixed on cantilever
brackets including supply and fixing 31.75mm C.P. waste coupling,
31.75 mm dia PVC flexible waste pipe of 914.4 mm length of Ist
quality ncluding chiselling brick masonry wall and making good &
restoring to original surfaces , overheads & contractors profit complete
for finished item of work in all floors
13 Supplying and fixing NP bib taps of size 12.70mm dia of Indian 4.00 NO #REF!
make heavy duty (long body) as approved by the Engineer-In-
Charge including cost and conveyance of all materials, labour
charges , overheads & contractors profit complete for finished item of
work in all floors.
14 Supplying and fixing NP bib taps of size 12.70mm dia of Indian 4.00 NO #REF!
make heavy duty (short body) as approved by the Engineer-In-
Charge including cost and conveyance of all materials, labour
charges , overheads & contractors profit complete for finished item of
work in all floors.
15 Supply and fixing of Ashirvad/ Ajay/ Astral Flowguard or
equivalent CPVC Pipes and Fittings SDR 11 to meet the requirement
of ASTM-D 2846 and are produced in CTS (Copper Tube Sizes 1/2" to
2") for hot and cold water (IS 15778:2007) including cost and
conveyance of all materials to site, labour charges for fixing, overheads
& contractors profit complete for finished item of work at all floor levels
19 Providing and placing on terrace (at all floor levels)polyetheylene 1500.00 NO #REF!
water storage tank with double layer approved brand and
manufacture with cover and suitable locking arrangement and making
necessary holes for inlet and outlets and over flow pipes but without
fittings and base support for tanks including cost and conveyance of
all materials and labour charges , overheads & contractors profit
complete for finished item of work.
#REF!
#REF!
#REF!
#REF!
#REF!
#REF!
#REF!
#REF!
#REF!
#REF!
#REF!
#REF!
#REF!
#REF!
#REF!
#REF!
#REF!
#REF!
#REF!
#REF!
#REF!
#REF!
#REF!
#REF!
#REF!
#REF!
#REF!
2 Gully traps 5
Say 5 Nos
3 Inspection Chambers 5
Say 5 Nos
4 Manholes
3' - 0' Depth 5
Say 5 Nos
6 Indian IWC
Ground Floor 1 1
Say 1 Nos
7 European EWC
Ground Floor 2 2
Say 2 Nos
9 Soap dish
Ground Floor 4 4
Say 4 Nos
10 Mirrors
Ground Floor 4 4
Say 4 Nos
11 Towel rods
Ground Floor 4 4
Say 4 Nos
12 Sink
Ground Floor 1 1
Say 1 Nos
13 NP bib taps
a) Long Body taps (Bath& wash Taps)
Ground Floor 4 4
Say 4 Nos
b) Long Body taps (Drinking water Taps)
Ground Floor 4 4
Say 4 Nos
IWC
Ground Floor 2 0.3 0.60
TAPS
Long Body taps (Bath & wash Taps)
Ground Floor 3 0.9 2.70
Wash Basin
Ground Floor 3 0.8 2.40
10.80 Rmt
Say 11 Rmt
16 CPVC Pipes
Terrace Ring Main
DOMESTIC WATER
a) 40.00 mm OD 45.00 Rmt
b) 32.00 mm OD 35.00 Rmt
c) 28.60 mm OD 10.00 Rmt
18 HDPE Tank
Domestic water 1000 Litrs
Drinking water 500 Litrs
2 Plain Cement Concrete (1:4:8) (cement: fine aggregate: Coarse 1 3.00 ONE CUM #REF!
aggregate) for foundations using coarse aggregate 40mm size
hard , machine crushed granite from approved quarry using
concrete Mixer 10 / 7 cft (0.2 / 0.8 cum) capacity including cost and
conveyance of all materials like cement, sand, coarse aggregate,
water etc. to site including all charges for machine mixing and hire
charges of concrete mixer, laying concrete in foundations and under
flooring bed, ramming in 15 cm layers finishing top surface to the
required level curing etc.,and overheads & contractors profit
complete for finished item of work. (APSS No. 402) For Foundation
3 Plain Cement Concrete (1:5:10) (cement: fine aggregate: Coarse 1 8.00 ONE CUM #REF!
aggregate) for foundations and under flooring bed using coarse
aggregate 40mm size hard , machine crushed granite from
approved quarry using concrete Mixer 10 / 7 cft (0.2 / 0.8 cum)
capacity including cost and conveyance of all materials like cement,
sand, coarse aggregate, water etc. to site including all charges for
machine mixing and hire charges of concrete mixer, laying concrete
in foundations and under flooring bed, ramming in 15 cm layers
finishing top surface to the required level curing etc.,and overheads
& contractors profit complete for finished item of work. (APSS No.
402)
4 Filling with useful available excavated earth (excluding rock) with 1 26.00 ONE CUM #REF!
a lead of 50 m in trenches, sides of foundations and basement with
initial lead in layers not exceeding 15cm thick, watering and
ramming including cost and conveyance of water to work site and all
operaitonal, incidental, labour charges, hire charges of T&P etc.,
and overheads & contractors profit complete for fnished item of work
(APSS NO.309&310)
5 Filling with carted gravel in trenches,sides of foundations and 1 73.00 ONE CUM #REF!
basement with initial lead in layers not exceeding 15cm
thick,watering and ramming including cost and conveyance of water
to work site and all peraitonal,incidental, labour charges,hire
charges of T&P etc., and overheads & contractors profit complete
for fnished item of work(APSS NO.309&310)
a) Columns :
1st Floor : 1 4.00 ONE CUM #REF!
b) Lintels
1st Floor : 1 0.80 ONE CUM #REF!
b) ROOF SLABS :
i) Slabs 125 mm thick upto an un-supported height of 4.27m
1st Floor : 1 51.00 ONE SQM #REF!
14 Providing Mild steel (MS) steel bars (Fe 250 grade as per IS 432)
of different diameters including labour charges for straightening,
cutting, bending to required sizes and shapes, placing in position
with cover blocks of approved materials and size and tying and lap-
splicing with binding wire of 18 SWG, forming grills for reinforcement
work as per approved designs and drawings, including cost and
conveyance of steel bars, including all wastages such as overlaps,
couplings, chairs, spacer bars including cost and conveyance of
binding wire, cover blocks and all incidental, operational, labour
charges such as cutting, bending, placing in position, tying etc., and
overheads & contractors profit complete for finished item of work.
( APSS No.126)
18 Plastering 12mm thick single coat in CM(1:5) using screened 1 17.00 ONE SQM #REF!
sand including cost and conveyance of all materials like cement,
sand, water etc., to site and all operational, incidental charges on
materials and including cost of all labour charges for mixing mortar,
finishing, curing as directed by Engineer-in-charge etc., and
overheads & contractors profit complete for finished item of work.
(SS 901,903 & 904) for basement
21 Providing 110 mm Dia ISI marked PVC down water take pipes 1 11.00 ONE RM #REF!
with socket , 2.5mm thick 4.0 kg/sq.cm pressure of ISI marked
including cost of necessary PVC Bends, shoes, iron / PVC clamps
and all other accessories and fixing in position including cost and
conveyance of all materials, operational & incidental charges
including all labour charges for fixing at site etc., and overheads &
contractors profit complete for finished item of work. (APSS No.
1328)
TOTAL :
#REF!
#REF!
#REF!
#REF!
#REF!
#REF!
#REF!
#REF!
#REF!
#REF!
#REF!
#REF!
#REF!
#REF!
#REF!
#REF!
#REF!
#REF!
#REF!
#REF!
#REF!
#REF!
#REF!
#REF!
#REF!
#REF!
#REF!
#REF!
#REF!
#REF!
#REF!
#REF!
#REF!
32.40
Say 33.00 Cum
3 PCC (1:5:10)
All round the Building 1 28.92 0.600 0.150 2.60
Deductions
C1 -8 0.230 0.600 0.150 -0.17
Under Flooring
Qty same as Granolithic Flooring 1 50.000 0.100 5.00
7.44
Say 8.00 Cum
c) Plinth beams
Horizontals
IPB2 - A1-A2, D1-D2 2 6.140 0.230 0.350 0.99
Ded for columns -4 0.300 0.230 0.350 -0.10
B1-B2, C1-C2 2 6.140 0.230 0.350 0.99
Ded for columns -4 0.300 0.230 0.350 -0.10
Verticals
A1-D1, A2-D2 2 8.460 0.230 0.300 1.17
Ded for columns -8 0.230 0.230 0.300 -0.13
2.82
Say 2.90 Cum
d) Tie beams
Quantity same as plinth beam 2.82
Say 2.90 Cum
11 VRCC
i Columns upto GL
C1/F1 8 0.230 0.300 0.800 0.44
8 0.44
Say 0.50 Cum
13 Roof slab
i) Roof Slab 125mm thick
A1-A2 X A1-D1 1 6.000 8.460 50.76
50.76
Say 51.00 Sqm
14 Lintels
R/S 1 3.460 0.230 0.175 0.14
V2 8 1.960 0.230 0.175 0.63
8 0.77
Say 0.80 Cum
15 Sun-Shade
R/S 1 3.600 3.60
Say 4.00 RM
21 External plastering
All round the Building 1 28.92 4.500 130.14
Terrace
Parapet wall 1 28.92 1.915 55.38
Deductions
V2 -8 1.500 1.000 -12.00
R/S -1 3.000 3.000 -9.00
164.52
Say 165.00 Sqm
22 Ceiling plastering
Qty Same as Granolithic flooring 44.32
44.32
Say 45.00 Sqm
23 Internal plastering 12 mm thick
alround the room 1 27.080 4.375 118.48
Deductions
R/S -1 3.000 3.000 -9.00
109.48
Say 109.00 Sqm
24 Basement plastering
All round the Building 1 28.92 0.600 17.35
17.35
Say 17.00 Sqm
25 Flooring
a) Granolithic Flooring
Ambulance garrage 1 5.540 8.000 44.32
44.32
Say 45.00 Sqm
b) Granolithic Flooring
Ramp 1 3.600 1.200 4.32
4.32
Say 5.00 Sqm
c) Impervious Coat
Terrace 1 6.000 8.460 50.76
50.76
Say 51.00 Sqm
26 Whiting for ceiling
Same as ceiling plastering 44.32
Say 45.00 Sqm
31 RCM Drop
R/S 1 4.200 0.450 1.89
1.89
Say 2.00 Sqm
2 Providing, Laying, Spreading and compacting graded 1088.00 CUM ONE CUM #REF! #REF!
HBG/HBG crushed stone aggregate to Wet Mix
macadem specification including cost of all materials
and including premixing the material with water at
OMC in Mechanical mix plant carriage of mixed
material by tipper to site , laying in uniform layers
with paver in base courses on well prepared surface
and compacting with Vibratory roller to acheive the
desired density etc., as directed by the Engineer-in-
Charge and as per MoRT&H specification.406 (5th
revision) for finished item of work. (Payment based
on levels for finished item of work)
3 Construction of Granular sub-base by providing 1814.00 CUM ONE CUM #REF! #REF!
HBG material confirming to Grading - III of MORT
& H Table 400-2 including cost and conveyance of
all material to woek site and spreading in uniform
layers with motor grader or by approved means, on
prepared surface mixing by mix place method with
Rotavator/ approved means, at OMC and
compacting with vibratory roller to achieve the
desired density etc., complete for finished item of
work as per MoRT& H specification 401 (4th revision)
and as directed by the Engineer- in - charge
(Payment will be made based on levels for finished
item of work)
4 Plain Cement Concrete (1:4:8) (cement: fine 777.00 CUM One CUM #REF! #REF!
aggregate: Coarse aggregate) for foundations
using coarse aggregate 40mm size hard , machine
crushed granite from approved quarry using
concrete Mixer 10 / 7 cft (0.2 / 0.8 cum) capacity
including cost and conveyance of all materials like
cement, sand, coarse aggregate, water etc. to site
including all charges for machine mixing and hire
charges of concrete mixer, laying concrete in
foundations and under flooring bed, ramming in 15
cm layers finishing top surface to the required level
curing etc.,and overheads & contractors profit
complete for finished item of work. (APSS No. 402)
for DLC
Rate
Unit Amount
Sl. No. Description of Work Quantity In
(in words) (Rs.)
Figures
5 Plain Cement Concrete (1:5:10) (cement: fine 17.00 CUM ONE CUM #REF! #REF!
aggregate: Coarse aggregate) for foundations and
under flooring bed using coarse aggregate 40mm
size hard , machine crushed granite from approved
quarry using concrete Mixer 10 / 7 cft (0.2 / 0.8 cum)
capacity including cost and conveyance of all
materials like cement, sand, coarse aggregate, water
etc. to site including all charges for machine mixing
and hire charges of concrete mixer, laying concrete
in foundations and under flooring bed, ramming in 15
cm layers finishing top surface to the required level
curing etc.,and overheads & contractors profit
complete for finished item of work. (APSS No. 402)
6 Plain Cement Concrete M 20 nominal mix using 312.00 CUM ONE CUM #REF! #REF!
20mm size graded machine crushed hard granite
metal (coarse aggregate - as per IS 383 - 1970 and
IS 2386 Part 1 to Part 8) from approved quarry using
concrete Mixer 10 / 7 cft (0.2 / 0.8 cum) capacity
including cost and conveyance of all materials like
cement, fine aggregate(sand), coarse aggregate,
water etc. to site including all charges centering,
labour charges such as weigh batching, machine
mixing, hire charges of concrete mixer, laying
concrete in position, curing etc., & lift charges , and
overheads & contractors profit for Kerb stone &
Sasur Drains for finished item of work. (APSS No.
402)
7 Construction of un-reinforced, dowel jointed at 1451.00 CUM ONE CUM #REF! #REF!
expansion and construction joint only, plain cement
concrete pavement, thickness as per design, over a
prepared sub base, with 43 grade cement or any
other type as per Clause 1501.2.2 M30 (Grade),
coarse and fine aggregates conforming to IS : 383,
maximum in a concrete mixer of not less than 0.2
cum capacity and appropeiate weigh batcher using
approved mix design, laid in approved fixed side
formwork (steel channel, laying and fixing of 125
mictron thick polythene film, wedges, steel plates
including levelling the formwork as per drawing),
spreading the concrete with sholvels, rakes,
compacted using needle, scareed and plate vibrators
and finished in continuous operation including
provision of contraction and expansion, construction
joints, applying debonding strips, primer, sealant,
dowel bars, near approaches to bridge / culvert and
construction joints, admixtures as approved, curing of
concrete slabs for 14- days, curing compound (where
specified) and water finishing to lines and grade as
per drawing and Technical Specification Clause
1501 MORD.
Rate
Unit Amount
Sl. No. Description of Work Quantity In
(in words) (Rs.)
Figures
8 Plastering 12mm thick single coat in CM(1:5) using 4326.00 SQM ONE SQM #REF! #REF!
screened sand including cost and conveyance of all
materials like cement, sand, water etc., to site and all
operational, incidental charges on materials and
including cost of all labour charges for mixing mortar,
finishing, curing as directed by Engineer-in-charge
etc., and overheads & contractors profit complete for
finished item of work.(SS 901,903 & 904)
9 Supply and placing of the Design Mix Concrete M 25 89.00 SQM ONE SQM #REF! #REF!
grade corresponding to IS 456 with minimum cement
content of 380 kgs per 1 cum of concrete using
weigh batcher / mixer with 20mm size graded
machine crushed hard granite metal (coarse
aggregate - as per IS 383 - 1970 and IS 2386 Part 1
to Part 8) from approved quarry including cost and
conveyance of all materials like cement, fine
aggregate (sand) coarse aggregate, water etc., to
site, centering using casurina ballies, bamboos,
wooden reapers, runners, wood posts, wall plates
etc., including all operational, incidental and labour
charges such as weigh batching, machine mixing,
lifting of concrete manually, laying concrete,
vibrating, curing , overheads & contractors profit etc.,
complete but excluding cost of steel and its
fabrication charges for finished item of work (APSS
No. 402) For 230mm thick Retaing wall
10 Providing Thermo Mechanically Treated (TMT) (Fe 2.00 MT ONE MT #REF! #REF!
500 / Fe 500 D grade as per IS 1786-1979) of
different diameters for RCC works including labour
charges for straightening, cutting, bending to
required sizes and shapes, placing in position with
cover blocks of approved materials and size and
tying and lap-splicing with binding wire of 18 SWG,
forming grills for reinforcement work as per approved
designs and drawings, including cost and
conveyance of steel bars, including all wastages
such as overlaps, couplings, chairs, spacer bars
including cost and conveyance of binding wire, cover
blocks and all incidental, operational, labour charges
such as cutting, bending, placing in position, tying
etc., and overheads & contractors profit complete for
finished item of work.( APSS No.126)
Rate
Unit Amount
Sl. No. Description of Work Quantity In
(in words) (Rs.)
Figures
11 Flooring with chequered Cement Concrete heavy 125.00 SQM ONE SQM #REF! #REF!
duty tiles conforming to IS: 13801 using aggregates,
cement, pigments of size 300mm x 300 mm and
thickness 25 mm of any shades as approved by
Engineer - In - Charge set over base coat of cement
mortar (1:6), 12 mm thick using screened sand over
CC bed alredy laid or RCC roof slab including neat
cement slurry of honey like consistency spread @
3.3 kgs per sqm and jointed with neat white cement
to full depth mixed with pigment of matching shade
including cost and conveyance of all materials like
cement, sand, water and tiles etc.,and overheads &
contractors profit complete for finished item of work.
#REF!
#REF!
Part- II -
Type-I(6.0m road with central median )
1 84.610 84.61
Add for variations 4.23
88.84
Say 89.00 RM
1b Type-II (6.0m road)
Part- I
alround the Parking area 1 328.510 328.51
Part- II
along compound wall towards 1 116.610 116.61
Attendants Dormitory
along Attendants Dormitory to 1 91.720 91.72
Hospital Bldg
along Hospital Bldg 1 90.470 90.47
along Hospital Bldg to DG Room 1 151.140 151.14
3 PCC(1:3:6)
SD2 1 900.00 0.800 0.075 54.000
54.000
Say 54.00 Cum
4 RCC M25 grade
Drain bottom
SD2 1 900.00 0.650 0.100 58.500
58.500
Say 59.00 Cum
7 TMT STEEL
Drain bottom 58.5 50.00 Kgs/Cum 2925.00
100mm thick drain side walls 810.0 80.00 0.100 Kgs/Cum 6480.00
100mm thick precast slab 585.0 60.00 0.100 Kgs/Cum 3510.00
12915.00
Say 13.00 MT
ABSTRACT ESTIMATE FOR SEPTIC TANK 100 USERS
1 Earth work excavation for foundations (Mechanical Means) for 71.00 Cum 86.00 6106
buildings in ordinary soils and depositing on bank for all lifts and
with an initial lead of 10m and up to 3m depth including all
operational,incidental, labour charges such as shoring, sheeting, planking,
strutting etc., and overheads & contractors profit complete for finished
item of work excluding dewatering charges etc., as per SS 20 B(APSS
308)
2 Plain Cement Concrete (1:5:10) (cement: fine aggregate: Coarse 3.30 Cum 3401.00 11223
aggregate) for foundations and under flooring bed using coarse
aggregate 40mm size hard , machine crushed granite from approved
quarry using concrete Mixer 10 / 7 cft (0.2 / 0.8 cum) capacity including
cost and conveyance of all materials like cement, sand, coarse aggregate,
water etc. to site including all charges for machine mixing and hire
charges of concrete mixer, laying concrete in foundations and under
flooring bed, ramming in 15 cm layers finishing top surface to the required
level curing etc.,and overheads & contractors profit complete for finished
item of work. (APSS No. 402)
3 Filling with useful available excavated earth (excluding rock) with a 15.00 Cum 25.00 375
lead of 50 m in trenches, sides of foundations and basement with initial
lead in layers not exceeding 15cm thick, watering and ramming including
cost and conveyance of water to work site and all operaitonal, incidental,
labour charges, hire charges of T&P etc., and overheads & contractors
profit complete for fnished item of work (APSS NO.309&310)
5 Providing Thermo Mechanically Treated (TMT) (Fe 500 / Fe 500 D grade 2.20 MT 55353.00 121777
as per IS 1786-1979) of different diameters for RCC works including
labour charges for straightening, cutting, bending to required sizes and
shapes, placing in position with cover blocks of approved materials and
size and tying and lap-splicing with binding wire of 18 SWG, forming grills
for reinforcement work as per approved designs and drawings, including
cost and conveyance of steel bars, including all wastages such as
overlaps, couplings, chairs, spacer bars including cost and conveyance of
binding wire, cover blocks and all incidental, operational, labour charges
such as cutting, bending, placing in position, tying etc., and overheads &
contractors profit complete for finished item of work.( APSS No.126)
6 Plastering 20mm thick single coat in CM(1:5) using screened sand 12.00 Sqm 269.00 3228
including cost and conveyance of all materials like cement, sand, water
etc., to site and all operational, incidental charges on materials and
including cost of all labour charges for mixing mortar, finishing, curing as
directed by Engineer-in-charge etc., and overheads & contractors profit
complete for finished item of work . (SS 901,903 & 904)
7 Providing impervious coat to exposed RCC roof slab surfaces of 95.00 Sqm 273.00 25935
sump , sump side wall,sump bottom slab,in side of septic tank , in
sunken slabs etc. to required slopes with CM (1:3) prop. using screened
sand 12mm thick mixed with integral cement water proofing liquid
confirming to IS: 2645-2003 manufactured by reputed manufacturers as
approved by Engineer-in-charge at 200ml per one bag of cement, laid
over roof slab when it is green, finished smooth with a floating coat of neat
cement and thread lining at regular intervals of 45cmx45cm where ever
necessary including cost and conveyance of all materials like cement,
sand, water proofing compound, water etc., to site, operational, incidental,
and labour charges for mixing mortar, laying, lift charges, rendering
smooth and thread lining, curing including rounding off junctions of wall
and slab etc., and overheads & contractors profit complete for finished
item of work. (APSS No. 901 & 903).
8 Providing impervious coat to exposed RCC roof slab surfaces to 25.00 Sqm 377.00 9425
required slopes with CM (1:3) prop. using screened sand 20mm thick
(average) mixed with integral cement water proofing liquid confirming to
IS: 2645-2003 manufactured by reputed manufacturers as approved by
Engineer-in-charge at 200ml per one bag of cement, laid over roof slab
when it is green, finished smooth with a floating coat of neat cement and
thread lining at regular intervals of 45cmx45cm including cost and
conveyance of all materials like cement, sand, water proofing compound,
water etc., to site, operational, incidental, and labour charges for mixing
mortar, laying, lift charges, rendering smooth and thread lining, curing
including rounding off junctions of wall and slab etc., and overheads &
contractors profit complete for finished item of work. (APSS No. 901 &
903).
9 RCM facia 50mm thick in CM(1:3) using screened sand for drop walls, fins 3.00 Sqm 1317.00 3951
with rabbit wire mesh & nomianl reinforcement as directred by Engineer -
In - Charge with dubara sponge finishing,including cost and conveyance
of all materials to site, operationals &incidental,cost and conveyance of
cement, wire mesh water to work site, centering, scaffolding and form
work,lift charges etc., and overheads & contractors profit complete for
finished item of work but excluding cost of steel and its fabrication charges
for finished item of work(APSS NO.403&903)
10 Supply and delivery of encapsulated plastic steps for man holes 32.00 Each 189.00 6048
manufactured as per companies standard specification including cost of
materials packing as per companiess standards, loading, transportation,
unloading and stacking at site of work including labour charges for fixing,
overheads and contractor profit etc., complete for finished item of work.
463695