FOR INSTALLATION OF DUCTING INSULATION Description of Work: Tag No. : Drawing Ref. No.: Location: System No.: Inspection Request No. : Contract No.: Project No: 625 INSPECTION ATTRIBUTES Item Description Accept Reject NA 1. Duct installation approved. Air leak test of Installed duct are carried out and test witness 2. by consultant / client Air leak testing approved by consultant I client before 3. proceeding for insulation 4. Duct were clean prior to insulation 5. Approved sealant used for installation of insulation 6. Approved sealant is not expired. Sealant applied as per manufacturers recommended 7. procedure Application of approved insulation adhesive and installation 8. of stuck up pins. Appropriate insulation material is installed on ducting as per 9. approved shop drawing / specification I approved material submittal. 10. Check thickness of insulation material installed on duct 11. Insulation firmly fixed I attached with duct 12. No voids I Gap between duct and insulation material. 13. Insulation lap joints are properly sealed with adhesive tape. Insulation not squeezed or damage at channel, angle 14. supports or other places 15. Others.