Professional Documents
Culture Documents
SLIDE NO. 01
Week-14
• Lecture-02
Introduction to Bridges (Different Components and Types of Bridges)
• Lecture-03
Loads in Bridges (Dead loads, Live loads and Lateral Loads)
Week-14
• Lecture-01
Load Combinations, Deck Sections, Live Load Moment and Commercial
Software for Bridge Analysis and Design
• Lecture-02
Detailing of Reinforced Concrete Elements
• Lecture-03
Thin Plate (Shell) and Folded Plate Structures
Week-14
Lecture-01
Load Combinations
The maximum bending due to the uniform lane loading of 0.64 kip/ft
occurs at midspan and may be computed from the following
expressions:
50 ft 50 ft 50 ft
Structural Design and Drawing (CE-422), Dr. Aslam Faqeer Mohammad 360
Copyrights Protected – Department of Civil Engineering, NED University of Engineering & Technology, Karachi
Date: 31stAug 2020
SLIDE NO. 23
Pre-stressed Cables
T1 = 0.206sec
T2 = 0.12sec
Structural Design and Drawing (CE-422), Dr. Aslam Faqeer Mohammad 370
Copyrights Protected – Department of Civil Engineering, NED University of Engineering & Technology, Karachi