Professional Documents
Culture Documents
PRD-3-015 (Issue 2) Work Instructions For INK JET Printer (Packing Section)
PRD-3-015 (Issue 2) Work Instructions For INK JET Printer (Packing Section)
2. RESPONSIBILITY
3. PROCEDURE
To set the machine as per Monthly Production Plan SAP T-Code ZPP_APVSR)
Proper PPES should be wore (Safety Shoes)
Check foot stand & without no sharp edges
Keep good housekeeping of machine
Use 5*5 strategy for machine cleaning
Place the tools at designated area
Well trained operator should be deputed
All ink & makeups should be properly tagged & placed
Proper disposal of chemical should be placed
Don’t apply air at human body during air cleaning of machine
PMS stage the require stock (Off Set & Dispenser) as Production plan SAP T-
Code COR1)
The Offsets and dispenser are received at coding machine floor inform of packed
cartons of require variety.
Check and Clean the Filters, and then start the machine and conveyor
Adjust the Print delay and Print Width of machine according to the
conveyor speed so that the coding comes on the White / Blank space meant for
the same purpose, of Offset and Dispensers .
Off sets & Dispenser (Without Coding) are placed at auto feed conveyor.
First Coded / Printed Pack of every Product must be checked and verified by
Quality assurance or Production supervisor to avoid any printing mistake
Continuously check that each & every Packets / Dispenser having code Date &
Price as per specification; which are clearly readable.
Check and Replace the Ink Reservoir and Solvent make up when required.
Fill the coded offsets & dispensers in cartons & deliver to near Dispenser
Conveyor line wise at packing.
PRD/3/015
WORK INSTRUCTIONS FOR (PACKING Issue 4
SECTION) INK JET PRINTER Page 2 of 2
4. RELATED DOCUMENT
5. DOCUMENT APPROVAL
Production
PREPARED BY
Executive
Senior Manager
REVIEWED BY
Production
Management
Representative /
APPROVED BY
FSTL