Professional Documents
Culture Documents
钢绞线与水泥基复合材料局部黏结滑移模型 朱俊涛
钢绞线与水泥基复合材料局部黏结滑移模型 朱俊涛
4
2022 年 4 月 Journal of Harbin Engineering University Apr. 2022
钢绞线与水泥基复合材料局部黏结滑移模型
朱俊涛1 , 张凯1 , 邹旭岩2 , 李可1 , 张普1
(1. 郑州大学 土木工程学院,河南 郑州 450001;2. 郑州工程技术学院 土木工程学院,河南 郑州 450044)
摘 要:为了解决由于钢绞线类黏结滑移试验的局限性,无法直接获得锚固长度内各点的实际黏结滑移关系的问
题,本文建立了基于加载端位移的高强钢绞线与工程水泥基复合材料局部黏结-滑移关系模型。 基于微元法,结合
高强钢绞线与工程水泥基复合材料平均黏结-滑移关系模型,采用试验、理论计算和数值模拟方法,对建立的局部
黏结滑移模型相关参数进行对比分析。 结果表明:局部黏结-滑移模型的计算结果和数值模拟结果在验证点( 自由
端和加载端) 处与试验结果吻合良好;与平均黏结-滑移关系模型相比,局部黏结-滑移关系模型可表征锚固长度范
围内各点的黏结滑移特征,且具有更好的精确性和适用性。
关键词:工程水泥基复合材料; 高强钢绞线; 拉拔试验; 微元法; 数值模拟; 理论分析; 黏结滑移; 锚固长度
DOI:10. 11990 / jheu. 202010030
网络出版地址:https: / / kns. cnki. net / kcms / detail / 23. 1390. U. 20220303. 1014. 002. html
中图分类号:TU528 文献标志码:A 文章编号:1006-7043(2022)04-0541-08
Abstract: The actual bond-slip relationship at different anchoring depths cannot be directly obtained because of the
limitations of the steel strand bond-slip test. Thus, a local bond-slip relationship model of high-strength steel strand
and ECC based on the slip of the loading end is proposed. This model is based on the infinitesimal method com-
bined with the average bond-slip relationship model of high-strength stainless steel strand and ECC. The relevant
parameters of the local bond-slip relationship model are compared and analyzed through experiments, theoretical
calculation, and numerical simulation. Results show that the experimental results of the load-slip of the free end
and the loading end of the specimen agree well with the numerical simulation results and the theoretical calculation
results calculated by the local bond-slip relationship model. Compared with the average bond-slip relationship mod-
el, the local bond-slip relationship model can characterize the bond-slip force characteristics at different anchoring
depths more accurately, and the local bond-slip relationship model has better accuracy and applicability.
Keywords:engineered cementitious composites; high-strength steel strand; pull-out test; infinitesimal method; nu-
merical simulation; theoretical analysis; bond slip; anchor length