1. The document provides a Job Safety Analysis sheet that lists potential hazards and risk control measures for erecting a fabricated bridge.
2. It identifies risks such as untrained workers, uneven surfaces, unapproved vehicles, damaged lifting equipment, and improper tools that could lead to personal injuries or falls.
3. The risk control measures include conducting safety briefings, using personal protective equipment, restricting access, inspecting equipment, adding banksmen to control traffic, properly securing loads, and ensuring bolts are tightened.
1. The document provides a Job Safety Analysis sheet that lists potential hazards and risk control measures for erecting a fabricated bridge.
2. It identifies risks such as untrained workers, uneven surfaces, unapproved vehicles, damaged lifting equipment, and improper tools that could lead to personal injuries or falls.
3. The risk control measures include conducting safety briefings, using personal protective equipment, restricting access, inspecting equipment, adding banksmen to control traffic, properly securing loads, and ensuring bolts are tightened.
1. The document provides a Job Safety Analysis sheet that lists potential hazards and risk control measures for erecting a fabricated bridge.
2. It identifies risks such as untrained workers, uneven surfaces, unapproved vehicles, damaged lifting equipment, and improper tools that could lead to personal injuries or falls.
3. The risk control measures include conducting safety briefings, using personal protective equipment, restricting access, inspecting equipment, adding banksmen to control traffic, properly securing loads, and ensuring bolts are tightened.
Activity Name:- Erection of Fabricated bridge Ref-
Location:- Date : Sr.N Activity Type of Risk Involved Risk Control measures o. Name Hazard TBT shall be conducted before starts the activity. Untrained Provide all PPE`S as i.e.Helmet,Jacket,Shoes,Goggles. Mobilisation of persons, 1 Personal injury All required permits should be taken before start activity manpower unexperienced person Work should be done under continous supervision. Only authorised person should be deployed for the work. Approch of Ensure that heavy equipment unloading access should be even surface. Uneven vehical Heavy fall of materials, Access should be safe,clear, & identified.Unloading stacking work area should be soft barricated. 2 Access, uneven Equipment at Personal injury work area No any loose materials to be kept inside barricating area. job location Only authorised person should be deployed for the work. Only inspected vehical having valid insurance,RTO,licence.& Ensure that head lights,reverse Turning of horn,indicators, front horn is in good condition fall of materials, Bank`sman should be present contionously for movement control. bridge for Unapproved Tilt of crane or 3 appropriate Vehical, uneven Ensure that hooking shall be adeqately fitted with Gunnybags & properly lock safety lutch. Farana, Personal position by work area, No any shall be allowed under suspended load.Guide rope thick shall be tied to both ends injury crane & Farana Access should be safe,clear, & identified.Unloading stacking work area should be soft barricated. Bank`sman should be present contionously for movement control. Only inspected crane having valid insurance,RTO,licence & form no. 11 Unapproved Ensure that the safety latch should be damage free.Boom rope should be in good condition. Tying the sling lifting m/c, to Bridge & damaged safety Ensure only inspected & Damage free ladder should use for access 4 fall of materials hook, crane, latch or welded Only certified lifting tackles should be used & all lifting tackle shall be visiually inspected before work. Farana hook, Improper access Bank`sman should be present contionously for movement control. Ensure that hooking shall be adeqately fitted with Gunnybags & properly lock safety latch. Lifting of No any shall be allowed under suspended load. Fabricated Damage lifting 5 bridge near tackle, sling Personal injury Guide rope shall be tied to both ends. erection escape location Gunny bags should be used for sharpness protection. Ensure that crane boom length shall be not more than m. Bank`sman should be stand by present at location Guide rope should be tied during shifting of material. Wrong rope Errection of Personal injury, fall anchor, overload Ensure that person stand away ; No one put hand below load during fixing & alignment. 6 Fabricated of person, stuck to on boom, Ensure bridge is fixed by bolt or welding before removing of wire rope or web belt bridge person colomn swing Ensure that inspected hand tools i.e. spanner used for nut bolting. Finger caught Ensure that nut bolt should be properly tight. Fixing & Cut injury, between, faulty 7 Alingment of personal injury, fall hand tools , Crane boom sling not removed untill the bridge adequately fitted in fastener with bolting. Bridge of bridge loose bolting Night work permit to be taken from concern engg.and safety dept. Darkness, fall Personal injury, Work during Ensure proper illumination during dark hours. 8 of person, fall damage to dark hours Electrical cable should lead min 2 m height. No exposed electrical wire.Earthing. of material property Route shall be illuminated.
Name & Signature of Site Engineer / Supervisor :______ Name & Signature of Site In-charge :___________
Name & Signature of Project In-charge :__________ Name & Signature of HSE Officer : ______