Professional Documents
Culture Documents
Mau Bm-003.3 - Ron, Silicone - Qaqc
Mau Bm-003.3 - Ron, Silicone - Qaqc
Điểm
Nội dung đánh giá Phương Điểm Max Ghi chú
STT/No (2)
Contents pháp (1) Max score Remark
Score
Quy trình - chứng nhận
1 27 42
Process - certification
Có layout sản xuất bố trí máy móc. Trong
đó, thể hiện đầy đủ công suất máy.
1-1 There is a production layout with detail R 3
area. In particular, It shows capacity of
machines
Có quy định bảo trì với các máy móc chính
1-2 There are maintenance regulations for main R 2
machinery
Có quy định thử nghiệm nguyên vật liệu
chính
1-3 R 2
There are regulations for testing key input
materials
Có lưu đồ sản xuất. Trong đó thể hiện đầy đủ
các công đoạn, các điểm cần kiểm tra
1-4 There is a production flow chart. It shows all R 3
the steps and checkpoints that need to be
checked
Tại các điểm kiểm tra, các yêu cầu sau được
mô tả đầy đủ :
- Tiêu chí chấp nhận
- Phương pháp, tần suất kiểm tra
- Người thực hiện
- Nhật ký kiểm tra
1-5 R 3
At the checkpoints, the following
requirements are fully described:
- Acceptance criteria
- Inspection method and frequency
- Implementer
- Inspection log
Có tài liệu hướng dẫn:
- kiểm soát lỗi không phù hợp
- kiểm soát độ chính xác của dụng cụ đo
lường
1-6 R 2
Instructions are available:
- Inadequate error control
- control the accuracy of measuring
instruments
Có danh mục dụng cụ đo lường
1-7 R 2
There is a catalog of measuring instruments
Khu vực lưu trữ vật liệu, hóa chất được kiểm
soát nhiệt độ, độ ẩm hàng ngày
Vật tư sử dụng có nhãn mác, thương hiệu, và
được kiểm soát tránh dùng nhầm : theo 1-10
2-2 The storage area for materials and O 3
chemicals is controlled for temperature and
humidity daily
Materials used are labeled, branded, and
controlled to avoid misuse: based on 1-10
4 Total 58 84
2. From Supplier :
-
Ghi chú :
(1) Phương pháp đánh giá :
R = Review document/ Xem hồ sơ, hoặc qua trao đổi
W = Witness/ Chứng kiến quá trình
O = Observed/ Trực tiếp quan sát
Địa điểm/Place: 0
Ngày/Date: