Professional Documents
Culture Documents
)Teljesítményelektronikai
félvezetők.
Nem vezérelhető többrétegű félvezető
eszközök.
Tirisztor, triak.
2
Devices available to the circuit
designer
3
Devices available to the circuit
designer
4
Power loss in an ideal switch
5
6
7
Nemvezérelhető többrétegű
(kettőnél (pl. dióda) több rétegű)
félvezető alkatrészek
a. Tirisztordióda=négyrétegű dióda
(=dinisztor)
b. Kétirányú tirisztordióda (diac)
c. Kétirányú (háromrétegű) dióda (diac)
8
a. Tirisztordióda=négyrétegű dióda
felépítése és kapcsolási rajzjele
A tirisztor felépítése hasonló lesz, de kiegészül a Gate vezérlőelektródával.
A tirisztor rajzjeleiben a Gate elektróda lesz jelölve a középső kettéválasztó
vonal helyett.
10
a. Tirisztordióda jelleggörbéje
A tirisztor karakterisztikája hasonló lesz, de kiegészül a Gate vezérlő-elektróda áramával.
breakover
UB0 kapcsolási fesz:20…200V
A blokkolótartományban is lezárt állapotban van.
12
b. Kétirányú tirisztordióda
Két tirisztordióda ellenpárhuzamos
kapcsolása
13
b. Kétirányú tirisztordióda felépítése és
kapcsolási rajzjele
Letörési feszültség
Tartó feszültség
20
Tirisztorok különböző tokozással
21
Tirisztor nyitó- és záróirányú
előfeszítése
Ha az anódra pozitív és a katódra negatív fesz-t kapcsolunk, akkor a tirisztor előrefelé üzemel.
Fordított polaritásnál hátrafelé irányról beszélünk.
22
Tirisztortriódák felépítése
23
Tirisztor felépítése és
rajzjelei (p-kapus, és n-kapus tirisztor)
24
Tirisztorok kapcsolási rajzjelei
majdnem függőleges
vízszintes
majdnem függőleges
szaggatott vonal:vízszintes
27
28
29
30
31
32
A Gate nyílirányban jobboldalon
van a rajzjelen.
33
34
35
Thyristor=SCR and LASCR
Static Characteristic
and circuit symbols
A Gate nyílirányban jobboldalon van a rajzjeleken:
majdnem függőleges
szaggatott vonal:vízszintes
36
Thyristor
Thyristor has a PNP structure and three terminals: anode (A), cathode (K) and gate (G).
37
Thyristor
It can be turned ON by injecting a current into the gate only when its anode is positive with
respect to cathode i.e., when it is forward biased. If higher gate current is passed the SCR
turns ON at a lower forward voltage. In ON state the current flows through SCR only from
anode to cathode. The ON -state voltage drop across it is typically 0.5 V to 2 V.
The SCR does not conduct when reverse biased even if gate current is injected. Once the SCR
turns ON, the gate loses control over the device. Therefore, SCR is a current driven semi-
controlled current pulse triggered uni—directional switch.
38
Thyristor
The process of turning OFF a semiconductor switch is known as commutation. To turn OFF
SCR, we have to reduce its anode current to zero (or rather to hold current) and then make its
anode negative with respect to cathode.
39
Thyristor
If the supply voltage driving the SCR is sinusoidal (ac), the commutation takes place on its
own because of zero crossing of the supply voltage. This is called line commutation. So, in
this case we do not need additional circuit components to turn OFF a conducting SCR.
40
Thyristor
But if the supply voltage is dc, then, additional circuit components are needed for
turning OFF a conducting SCR. This is the most undesirable feature of SCR. Because of
this, SCRs are not preferred in applications like inverters and (dc) choppers where the
supply is dc. Instead, fully controlled switches like MOSFETs and lGBTs are used. But in
applications where the supply voltage is ac like rectifiers, HVDC transmission etc, SCRs
are still in use.
41
Silicon Controlled Rectifier(SCR)
(=Tirisztor) kommutációja
42
Thyristor
43
Thyristor
44
Thyristor
45
Triak
46
Triak (kétirányú tirisztor(trióda))
Váltakozóáramú körök vezérlését tirisztortriódák ellenpárhuzamos
kapcsolásával lehet megoldani (antiparallel kapcsolás).
Ezt egy n-kapus (katódoldalon vezérelt) és egy p-kapus (anódoldalon vezérelt)
tirisztor ellenpárhuzamos kapcsolásával valósíthatjuk meg.
Ha ezeket egy tokban vagy egy szeleten valósítjuk meg,
akkor csak egy vezérlőelektródára van szükség.
47
Triak felépítése és rajzjele
Egy n-kapus
és Ha ezeket egy tokban
egy p-kapus vagy egy szeleten
tirisztor valósítjuk meg,
ellen- akkor csak egy
párhuzamos vezérlőelektródára
kapcsolása van szükség.
48
Triac
Static Characteristic and Circuit Symbol
szaggatott vonal:vízszintes
majdnem függőleges
49
A Gate elektróda jelét, sokfelé tehetjük a triak rajzjelében.
Triac
TRIAC is an acronym that has been coined to identify the TRIode (three»electrode) AC
semiconductor switch. It is a semi—controlled bidirectional switch having three terminals —
Main Terminal1 (MT1), Main Terminal 2 (MT2), and Gate (G). We can visualize MT2 and MT1 as
equivalent to anode and cathode respectively of SCR. This device behaves similar to two SCRs
connected in anti—parallel.
In Quadrant·I the terminal MT2 is positive with respect to MT1 and the device can be switched
ON by positive gate current pulse exactly like an SCR. The gate loses control once the device has
been latched into conduction, and it continues to conduct like a diode as long as the current
flow is in the same direction.
It turns OFF when the current tends to reverse, due to reversal of the voltage polarity across the
main terminals. The gate now regains control and the TRIAC can be turned ON again only by
gate triggering. In Quadrant—III, the terminal MT1 is positive and the device can be
switched ON by negative gate current pulse. Therefore this device (triac) is ideal for use in an ac
voltage controller.
51
Triac
TRIAC is more economical than a pair of thyristors in anti—parallel and its control is
simpler. But the disadvantage of TRIAC is that its gate current sensitivity is poorer
and the turn OFF time is longer (due to the minority carrier storage effect). So, it is
not used in ac systems of frequency more than 400 Hz. Its dv/dt rating is also much
lower thus making it more difficult to use with inductive loads. A well designed R-C
snubber network should therefore be connected across the TRIAC to keep dv/dt
within safe limits. Compared to SCRs TRIACs have lower handling capacity. TRIACs
are tipically used at 50Hz or 60Hz in small motor speed regulators, temperature
control, illumination control, liquid level control, phase control circuits, power
switches, etc.
Nature of control signal: pulse triggered
Controllability: can be turned on, semi-controlled
Direction of conduction: bilateral
Alkalmazzuk:
villamos biztosítókban és váltakozó áramú fogyasztók terhelésszabályozására.
Világításszabályozó kapcsolásnak a kapcsolási rajzában levő triac és diac szerepét,
működését, az AC-AC átalakítóknák meg fogjuk beszélni.
52
A triak karakterisztikája
vízszintes
majdnem függőleges
Elnevezés:TRIAC=TRIode+Alternating Current
A triakot mindkét irányban, váltakozó árammal és egyenárammal is be lehet gyújtani.
Típustól függően 1200 V -ig és 120 Amper-ig terhelhetők.
Alkalmazzuk:
villamos biztosítókban és váltakozó áramú fogyasztók terhelésszabályozására.
53