The document provides instructions for a practice lesson to create facing and contour toolpaths in a CAD/CAM software. The instructions guide the user to open a part file, create a facing toolpath with a face mill tool, create a contour toolpath around the base of the part with a flat endmill using roughing passes and multiple depths, create another contour for a small recess with the same tool but without roughing or stepdowns, and simulate and save the toolpaths.
The document provides instructions for a practice lesson to create facing and contour toolpaths in a CAD/CAM software. The instructions guide the user to open a part file, create a facing toolpath with a face mill tool, create a contour toolpath around the base of the part with a flat endmill using roughing passes and multiple depths, create another contour for a small recess with the same tool but without roughing or stepdowns, and simulate and save the toolpaths.
The document provides instructions for a practice lesson to create facing and contour toolpaths in a CAD/CAM software. The instructions guide the user to open a part file, create a facing toolpath with a face mill tool, create a contour toolpath around the base of the part with a flat endmill using roughing passes and multiple depths, create another contour for a small recess with the same tool but without roughing or stepdowns, and simulate and save the toolpaths.