Professional Documents
Culture Documents
Classification: Confidential
Title: Typical Wartsila Foundations DocID: WDAAA031234
Revision: c
Created by: Markus Sandås / 22-Sep-2010 Status: Finalised
Finalised by: Markus Sandås / 22-Sep-2010 Pages: 1 (1)
Project: IN024 - WFI-P STANDARD
Power Plants Description: Info of typical foundations for soil investigation
Type: Specification
Wärtsilä uses standardized foundation solutions for its generating sets, buildings and exterior structures. Foundations are
mat slab type bases with relatively low bearing stresses suitable for wide range of soil conditions. The top of foundations
is in level with the floor slab.
Gen-set foundations
Genset / Solution Concrete block Concrete block Max static bearing stress
foundation Length x width (m) depth (m) under foundation
W20 Container
W20 EG-Set / Skid
Allowable long term settlement difference between the gen-set and surrounding floor/ power house is 5 mm.
Gen-sets are flexibly mounted. Dynamic forces (vibrations) transmitted to the foundation are minimal.
- Typical dims:
V M
H
slab 250 mm
750 mm
600 mm
Tank foundations
- Foundation for large tanks: concrete ringbeam and earth base
- Foundation for small tanks: concrete slab
- Height of the tanks (as well as bearing stresses) is variable and depends on soil and site conditions, typical
bearing stress for large tanks is approx. 80…150 KN/m²
-Allowable total settlement for the ringwall approx. 200 mm