WORK INSTRUCTIONS
‘SAFETY WORK INSTRUCTIONS FOR QUALITY ASSURANCE
180 CLAUSE: 85 Devs
10
20
30
40
50
60
64
10
7A
Deeteaneanwin | Rewnterm | Becta vases [Pomion
A
8)
°
0)
5
FA)
Purpose
To ensure that safe working practices are folowed by the employees and avoid accidents utile doing
Inspection and testing of Aluminium profiles and operating test equipment
Scope
Applicable to all measuring and test equipment and Aeging Fumaces used by QA within Sagar Asia Group
Responsibilities
Operators
QA in-charge
Terms and Defi
NL
‘Methodology
‘The Operatives shall wear the following safety equipment before starting the operations at foundry section
+ Safety goggles
* Helmets
¢ Hand gloves
+ Safely shoes
Operatives working quality contol table shal be cautious with the sharp edges ofthe items to avoid injuries
Precautions shall be taken to protect eyes by wearing the goggles in order to avoid fl of chips inthe eyes
while removing chips on the material with ar pressure
‘The operatives shal take precautions while shiting the material with crane from quality control table to
ageing fumace, packing area and other places
OPERATION OF FIRE EXTINGUISHER: In case of fe, use mechanical foam for extinguisher or dry
Chemical powder, extinguisher to contol same. To operate the ire extinguisher please remove the safety
Clip on the top, strike the knob and direct the discharge of foam/powder the ire point. Sufficient numbers of
‘extinguishers are kept in the foundry section
(OPERATION OF FIRE EXTINGUISHER’
2) Incase of fire at ageing funace, use powder extinguisher to control the same,
») For usage remove safety clip, strike the knob and direct discharge at fre point. Sufficient numbers
‘of extinguishers are placed near the ageing furnace:
References
Process sheet
Records
Log Book
Prepared by: Gseap ‘Approved by:
Date: 01-Dee2016 Date: 07-0e62016
[feonrrou k
WON