Professional Documents
Culture Documents
Safety:
1 2 3 4
First, put something Then get your After hammer your After place, the
hard under the letters letters using the letters properly back
place you are going bolts in the correct order
to hammer
Step 3: Cutting the outer
edges of the circle
01 02 03 04
First, make a Then get eye After with a tin Make sure while
circle by using a safety goggle and snip start cutting cutting to leave
red cup for all 4 gloves for safety around the circle space by the
circle
Step 4: Shapen your
circles
1 2 3 4 5
Eye safety Get a vice and Then insert your And move the Make sure to
goggles, gloves, find a clamp circles one by vice slowly on keep your hands
hearing one into the the circle away from the
protection for clamp forward and part you are
safety back filing
Identifying the Centre point of the
circles:
To begin you
Find a hard
will need
surface and Continue
gloves, After get a
hammer on doing this for
hearing chipping
the edges all your
protection, hammer
until you think pedals
and eye
it's enough
protection
Making the star
To make a star you
will need to ask Mr.
Spiers for another
piece of metal
First you have to ask Mr., After get a ruler and a writing Then you will need pliers and And to prepare the stem you
Spiers for a welding rod or use utensil then mark on the line cut the 24 inches rod into 12 will need a chipping hammer,
someone else's when they cut up to 12 inches inches gloves and hearing protection
theirs also eye protection.