Professional Documents
Culture Documents
1. หาแรงภายในชิ้นส่วน ( Maximum shear and Maximum momentโดยการตัดคาน หรือจาก shear, moment diagram
𝑀𝑦 𝑀 𝐼
2. ทาการออกแบบโดย Maximum moment จากสูตร 𝜎𝑎𝑙𝑙𝑜𝑤 = หรือ σ โดย 𝑆𝑥 =
𝐼 𝑆𝑥 𝑦
𝑉𝑄 3𝑉
3. ทาการตรวจสอบหน่วยแรงเฉือน จากสูตร 𝜏𝑚𝑎𝑥 = สาหรับหน้าตัดใดๆ หรือเฉพาะหน้าตัดสี่เหลี่ยมเท่านั้น 𝜏𝑚𝑎𝑥 =
𝐼𝑡 2𝑏ℎ
𝑉𝑄
ต้องมีค่าหน่วยแรงเฉือนที่ยอมให้ 𝜏𝑎𝑙𝑙𝑜𝑤 ถ้ามีค่ามากกว่า ทาการออกแบบหาหน้าตัดใหม่ จากสูตร 𝜏𝑎𝑙𝑙𝑜𝑤 = หน้าตัด
𝐼𝑡
3𝑉
สี่เหลี่ยม 𝜏𝑎𝑙𝑙𝑜𝑤 =
2𝑏ℎ
Fตะปูมสลักเกลียว 𝑉𝑄
3.1 การหาระยะตอกตะปู หรือ สลักเกลียว s = โดย 𝑞 = 𝜏𝑡 , 𝑞 = สาหรับหน้าตัดสี่เหลี่ยม
𝑞 𝐼
6𝑉 ℎ2
𝑞= ( − 𝑦2 )
ℎ3 4
3.2 แรงที่กาวต้องใช้ในการยึด𝐹 = 𝑞𝐿
4. ตรวจสอบระยะการแอ่นตัว ∆𝑎𝑙𝑙𝑜𝑤 = L/240,L/300,L/360
จากสมการ
Example 1
Find the state of principal stresses and angles.
Find the state of max. in-plane shear stresses and related angles
Find the stress of stresses at 30o counter clockwise.
Example 2
Find the state of principal stresses and angles.
Find the state of max. in-plane shear stresses and related angles
Find the stress of stresses at 30o counter clockwise.