Professional Documents
Culture Documents
1. If resistance of any coil is 120 OHM. Calculate the resistance when its
length is increased by 20% and its dia is increased by 50 % ( fill in the
blank)
Ans 64 ohm (R=ÞL/A)
3. What is the magneto motive force in a 75 turn coil of wire when there
are 4 amp of current through it
(fill in the blank)
Ans300 (mmf= IN) ampere turns
eto another what is the voltage between the two points (fill in the blank)
Ans 5.83 (W=QV)
5. Calculate the velocity of conductor if terminal voltage is 2.2 v/m & the
magnetic field strength is 0.2T (fill in the blank)
Ans 11 m/s (E=Blv)
6. Calculate the frequency of the motor if the speed is 4800 rpm & no of
poles are 2
(sometime speed is given in RPS)
Ans 80 Hz (N=120f/P)
10. Find the voltage of a motor of 200 rpm when the flux changes from
1wb to 4wb (fill in the blank)
Ans 600 V
(For sine wave the average value is 0.6365 times the maximum
value)
(For sine wave the rms value is 0.707 times the maximum
value)
18.the voltage induced across a certain coil is 150 mV. A 100 ohms
resistor is connected to the coil terminal. calculate the induced current in
milli amps.
Ans 1.5 ma
19. If the resistance of the wire is 15 ohms if length is doubled and dia
is one third, then resistance of the wire is???
Ans 270
20. what is the maximum allowable primary current of a 2kva step down
transformer with 4:1 turn ratio , if connected across a 440 v line?
Ans 4.5
21. If the flux through 120 turn coil changes steadily from 2wb to 6 wb
in 1 second. what is the voltage induced??
Ans 480
24. The armataure resistance of a 200 V d.c. machine has 0.5 ohm. If
the full load armature current is 50 A, what will be the induced e.m.f.
when, the machine acts as (i) generator (ii) motor will be
(a) 230 V, 170 V (b) 210 v, 190 v, (c) 225 V, 175 C (d)202.5 V, 197.5V