Professional Documents
Culture Documents
SUBJECT: SPECIFICATIONS
SCOPE OF WORKS:
General Condition:
The works included in this project comprise the furnishing of all materials, labor, equipment and other
facilities and the satisfactory performance of all work necessary to complete this project as shown on plans and
detail drawings. All items of work specified herein but not included in the bid schedule shall be omitted as if not
shown in this specification. Also, the latter shall prevail, in case items of work are not shown in the specifications
but included in the bid schedule. Materials not subjected to quality tests should be certified PS-Mark by DTI.
Items of Works:
I. SCAFFOLDINGS
Description
This item shall consist of fabrication and installation of forms and furnishing of labor if specified,
for the necessary completion of this work.
Material Requirements
Description
This item shall consist of all materials and plastering of concrete hollow blocks 16mm thick
on both sides of exterior and interior walls.
Material Requirements
- Use HOLCIM Portland cement for smooth plain cement plastered finish.
Description
This item shall consist of fabrication and installation of steel truss, cee-purlins, fascia frame as to type,
size and shape as shown on plans and detail drawing. Use A36 structural steel (FY=248Mpa)
Material Requirements
RAILINGS/ FASCIA FRAME
Description
- This item shall consist of installation of light metal frame assembly, hanger and fiber cement board.
The materials shall be seasoned, free from loose or unsowed knots sap cracks, shake, another
imperfections, impairing their strength, durability and or appearance.
Material Requirements
V. PAINTING WORKS
Description
This item shall consist of furnishing all paint materials, labor, tools, Equipment and plant required in
undertaking the proper application of painting indicated on the plans and in accordance with this specification.
Material Requirements
Metal or Steel
Concrete:
Clean the surface thoroughly, it must be free from dirt, grease and oil that can damage the
adhesion of newly applied paint.
The surface shall be clean before applying polituff body filler for uneven surfaces
Clean the surface thoroughly, it must be free from dirt, grease and oil that can damage the
adhesion of newly applied paint.
Approved by:
ABDULWAHID D. BUALAN
Punong Barangay