Professional Documents
Culture Documents
Objectives and requirements for the activity in Pipe Bending were clearly
stated and planned 10
The used reference books, handouts and learning materials needed were 10
used to the needs of Pipe Bending topic
Objectives or purpose of the plan were based on materials design and job 10
needed for pipe bending.
Preparation of materials and tools are prepared before the actual task 10
Procedure on the Process of Bending PVC pipe using Heat gun are analyzed 10
During actual activity, learners, follow instructions from the job plan. 10
Bend on the different kinds of pipe bending are performed according to their
specific purpose 10
For every activity right uses of tools, measuring instrument and equipment
are applied 10
Finished product appearance is good looking and the same on the actual
sample of pipe bend 10
All activities are done in specified time frame 10
Often Not
Observed Observed
3 to 4 1 to 2
10
1
Often Not
Observed Observed
3 to 4 1 to 2
10
2
Often Not
Observed Observed
3 to 4 1 to 2
10.00
7
100.00