Professional Documents
Culture Documents
ASSIGNMENT
NAME:
ID NUMBER:
SECTION NUMBER:
MARKS: / 25
Figure 1 shows a plan view of two flights stairs. The flights are spanning perpendicularly to
each other sharing one common landing. The parameters required for the design is given in
Table 1 and Table 2. The width of going and width of landing are 250 mm and 1550 mm,
respectively.
Determine the design moment and shear force for this staircase. Then, design the main
reinforcement of the staircase. Check your design in terms of shear, deflection and cracking.
Sketch the detailing of this staircase.
Figure 1
Table 1
Your ID Num. Finishes and Variable loads Concrete Landing and
services cover waist
thickness
Last TWO digit 0.5 + (the two last digit
of you ID is 1 + (the last of your ID / 10) 25 mm 160 mm
LESS THAN digit of your Ex: AB17145
50 ID / 10) 0.5 + (45/10)
= 5.0 kN/m
Last TWO digit Ex: AB17112 1 + (the two last digit of
of you ID is 50 1 + (2/10) your ID / 20) 30 mm 175 mm
AND MORE = 1.2 kN/m Ex: AB17185
1 + (85/20)
= 5.25 kN/m
2
Table 2
Your ID Num. Riser height concrete steel grade
strength
Last digit of you
ID is EVEN 165 mm C25 G500
NUMBER
Last digit of you
ID is ODD 180 mm C30 G500
NUMBER
[25 Marks]